Support a new boolean property `cors` which - if set to true - causes the
dispatcher to positively answer CORS OPTIONS requests after authentication
without actually running the dispatching target.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Decode the HTTP message bodies of any request carrying a Content-Length
header, not just those in POST requests.
This allows handling parameters in other methods, OPTIONS in particular.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Ensure that the (table) length of a file upload value has nonzero length
by initializing the first table index with the file name.
This fixes tests in the form
x = luci.http.formvalue(...)
if x and #x > 0 then ... end
Fixes#1763.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Ship an ACL definition for granting full read/write access to uci
configuration files via ubus rpc. This is a precondition for enabling
uci session isolation later on.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Restore the old luci.http behaviour of converting repeated POST params into
single tables holding all values instead of letting each repeated parameter
overwrite the value of the preceeding one.
Fixes, among other things, the handling of CBI dynamic list values.
Fixes#1752
Fixes 59dea0230 ("luci-base: switch to lucihttp based POST data processing")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Introduce luci.model.uci.set_session_id() and luci.model.uci.get_session_id()
to set and get the effective session ID respectively.
When a session ID is set, it is sent as `ubus_rpc_session` attribute to rpcd,
causing it to use per-session change directories, isolating LuCI changes from
the global system uci state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
LuCI itself now uses ubus calls to interact with uci configuration while
the remaining direct libuci-lua users have been updated to either depend
on the binding library or to use luci.model.uci.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Also adjust the dependencies of components depending on these classes and
flatten the namespace from luci.http.protocol.* to luci.http.*
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
With only the decoder routines remaining in luci.http.protocol, it makes no
sense to keep the low level protocol class around, so fold the remaining code
into the central luci.http class.
Also adjust the few direct users of luci.http.protocol accordingly.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- Rewrite getcookie() to use liblucihttp header value parsing
- Rewrite setfilehandler() to use local variables and have cleaner code
- Fix build_querystring() to actually *en*code the given params
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This reverts commit ad7dc4a492.
Since we're using liblucihttp now, that library is the appropriate place to
add such decoding helper functions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use the liblucihttp provided multipart and x-www-urlencoded body parsers
and drop the old Lua parsing code.
The C based data parsers are way faster than their old Lua counterparts
while producing less string garbage and more correct results.
While refactoring the luci.http.protocol code, also drop unused functions
and dead code, heavily reducing the module size.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This 404 error template rendering has been broken for a long time due to bad
function environment level in luci.template when invoking the rendering from
the toplevel dispatcher context.
Fix this issue by adding a local function indirection, essentially adding an
additional stack frame.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Instead of attempting to access the request environment directly (which does
not work anyway using the CGI SGI), use the already sanitized
dispatcher.context.request property to print out the not found url.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
It is possible to inject unescaped markup using a double encoded null byte
via PATH_INFO on certain leaf nodes.
Since there is no legitimate reason to handle null bytes in any part of the
requested url, simply skip over such bytes when parsing the PATH_INFO value.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The C implementations of urlencode and urldecode are considerably faster
than their current Lua counterparts.
On an AMD Geode system, the C variant is up to ten times faster when
decoding strings and up to four times faster when encoding them.
The functions are also designed to only allocate new strings when any
actual changes are required, otherwise they reuse the existing input
strings, reducing the overal memory usage somewhat.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The cbi class will react on an empty "cbi.submit" parameter as well so we
must intercept GET requests using that too.
Fixes 186e690c0 ("luci-base: dispatcher: reject non-POST requests with any cbi.submit value")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Update timezone data to 2018d
http://mm.icann.org/pipermail/tz-announce/2018-March/000049.html
In 2018, Palestine starts DST on March 24, not March 31.
Adjust future predictions accordingly.
Casey Station in Antarctica changed from +11 to +08
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Properly propagate the config parameter to the foreach iterator in order
to fix get_first() lookups.
Fixes#1734.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Prevent various XSS vectors by not interpolating field and path values
verbatim into script and html contexts.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Introduce a get_state() function which can be used to access legacy
uci state variables. This is usually not needed anymore but some
packages (mainly mwan3) still rely on this.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Make the hint message more explicit to tell users that the prefix size needs
to be specified as well.
Fixes#1559.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The lookup function takes multiple, possibly malformed path fragments,
splits them on slashes, constructs a temporary path and looks up the
result in the dispatch tree.
If a matching node has been found, the function will return both the
node reference and the canonical url to it.
If no corresponding node is found, the function returns nil.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Introduce a new function luci.util.shellquote() which encloses the given
string argument in single quotes and escapes any embedded single quote
characters.
This function is intended to be used when interpolating untrusted input
into shell commands.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Due to the fact that luci.model.cbi reacts on any "cbi.submit" value while
the dispatcher only required POST for cbi.submit == 1, the CSRF token
protection could be bypassed.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Introduce a new template property FULL_REQUEST_URI which returns the full
canonicalized request URL built from SCRIPT_NAME, PATH_INFO and QUERY_STRING.
This new property is safer to use compared to using the raw REQUEST_URI CGI
environment variable directly as this value is essentially untrusted user
input which may contain embedded escaped slashes, double forward slashes and
other oddities allowing XSS exploitation or request redirection.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Some applications, e.g. dnsmasq, do not allow hostnames starting with an
underscore, therefor extend the existing hostname datatype validator with
a `strict` which disallows a leading underscore.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Switch luci.model.uci to use ubus uci calls instead of driving libuci-lua
directly.
This prepares support for more advanced features such as per-session change
isolation and configuration rollback on errors.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* enhance the checklib function in util.lua to check the 'fullpathexe'
as well, e.g. this fixes runtime errors on the dhcp/dns template in
environments without dnsmasq
Signed-off-by: Dirk Brenken <dev@brenken.org>
Use the new luci.ip MAC address facilities to parse and verify MAC addresses
in a common way, instead of relying on various ad-hoc solutions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The /etc/ethers file may contain any number of white space characters
between the mac address and the IP/hostname field, so extend the pattern
to allow for that.
Man ethers(5) also states that the IP field may be a symbolic hostname,
so test whether the name is an IP address or hostname before adding it
to the hints structure.
Fixes#1674.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
If IPv6 prefix assignment is disabled, the "local-address" structure
might exist, but be empty which causes the adress formatting in the
network model class to bail out.
Verify the completeness of the "local-address" structure before using
it in order to avoid runtime errors.
Fixes#1657.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Keep the ifname and bridge state backup variables in /etc/config/luci to not
pollute /etc/config/network.
Fixes#1655.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
OpenWrt/LEDE introduced the "local-address" field a while back to expose the
effective local host address of the delegated prefix, so use that information
instead of assuming `[prefix]:1`.
Fixes#1484.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
A valid host ID as accepted by netifd must meet the following criteria:
- Is either one of the two special "random" or "eui64" strings
- Or is a valid IPv6 address according to inet_pton(AF_INET6)
- Has the first 64 bit set to zero
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Vladimir <picfun@ya.ru>
[renamed swedish advanced-reboot.po as well, fixed a syntax error,
filtered updated files through ./build/i18n-sync.sh]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The _wifi_sid_by_ifname() function depends on _wifi_state_by_ifname()
so reorder the private helper functions accordingly to avoid nil value
call attempts.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- fix mapping of ubus wireless state to uci declared vifs
- fix leaking foreign vif info into per-phy iwinfo stats
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Update timezone data to 2017c
http://mm.icann.org/pipermail/tz-announce/2017-October/000047.html
Briefly:
Northern Cyprus switches from +03 to +02/+03 on 2017-10-29.
Fiji ends DST 2018-01-14, not 2018-01-21.
Namibia switches from +01/+02 to +02 on 2018-04-01.
Sudan switches from +03 to +02 on 2017-11-01.
Tonga likely switches from +13/+14 to +13 on 2017-11-05.
Turks & Caicos switches from -04 to -05/-04 on 2018-11-04.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Properly deal with client accept languages containing a culture identifier
such as "zh-CN" or "pt-BR".
Fixes#1226.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- Properly handle logic for evaluating inverted dependencies means
when depending on another field *not* having a given value
- Perform datatype validation *after* populating combobox choices to
avoid triggering a false-positive when validating an .rmempty = false
combobox during form instantiation
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The previous implementation of the function only returned ethernet
interfaces because it relied on the AF_PACKET family entries returned
by getifaddrs().
Change the function to simply collect all interface names it sees in
order to avoid missing tunnel interfaces.
Fixes FS#917.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
cbi_init() needs to be called at the end of the page to initialize
cbi_strings with "[data-strings]" while cbi_browser_init() happened
before that.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Some controller actions like the ones in "servicectl" require authentication
but are not meant to provide an authenticator because they're only invoked
by scripts.
Rework the dispatcher logic to handle this situation and only bail out if
an authenticator name other than "htmlauth" is set.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Drop the individual calls to nixio.getnameinfo() in luci.sys.net and rely
on the "network.rrdns.lookup" ubus call instead to fetch domain information
within a guaranteed timeout.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Drop a number of redundant functions from luci.sys to shrink the code a bit:
* luci.sys.net.arptable() - replaced by luci.ip.neighbors()
* luci.sys.net.routes() - replaced by luci.ip.routes()
* luci.sys.net.routes6() - replaced by luci.ip.routes6()
* luci.sys.net.deviceinfo() - replaced by nixio.getaddrinfo()
* luci.sys.net.pingtest() - no known user
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Drop the custom credentials checking in favor to perform proper session
logins via rpcd. This is needed to properly setup ACLs when spawning
rpcd sessions in order to support direct client side ubus access in the
future.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Line 3021:
msgid "Switch protocol"
sould be:
msgstr "切换协议"
This "Switch protocol" means "Change one protocol to another protocol", Not "protocol of switch deivce"
Add support for 'ip6ifaceid' option for proto_static in LuCI.
Information about the option:
The option is optional and defaults to '::1'.
Allowed values: 'eui64', 'random', fixed value like '::1' or '::1:2'
When IPv6 prefix (like 'a🅱️c:d::') is received from a delegating
server, the ip6ifaceid suffix (like '::1') is used to form
the IPv6 address ('a🅱️c:d::1') for the interface.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
In some cases it is useful to be able to override the template used for the
sysauth login dialog.
Add a new property "sysauth_template" which allows overriding the template
name from controller files.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Adds support for the fwmark option.
FwMark is a 32-bit fwmark for outgoing packets.
If set to 0 or "off", this option is disabled.
Signed-off-by: Dan Luedtke <mail@danrl.com>
If hostname get changed in "/etc/config/system" dnsmasq should reloaded
his config to be reached again under the URL [HOSTNAME].lan
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Add datatype 'hexstring' for input validaiton datatypes.
It will accept any hexadecimal string.
(no length validation, as rangelength can be used for that.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
The missing parens lead to a wrong expression precedence, causing a runtime
error when attempting to compare nil with a number.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The expiry time in a dnsmasq lease file line may be 0 (i.e.
expiry date = 01/01/1970 00:00:00 GMT) to denote an infinite
lease time, so adjust the code to properly support that.
The expiry attribute of the lease object will be set to "false"
in case of an infinite lease. This is to mimic the odhcp code below.
If the expiry date is not equal to 0, then just do exactly what was
done before (return the os.diff of current time and ts).
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
This should result in the MAC address display being the same
using odhcpd for v4 DHCP as when using DNSMasq for v4 DHCP.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
Recently a string to be translated were added to Lua source, so
I synchronized po templates and po file of each language with Lua
source.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Default behaviour of changes to fstab (Mount Points) was
to use /etc/init.d/fstab restart, however this unmounts
filesystems via block umount which can cause the device
to fail, so replace the initscript call with an exec
of 'block mount'.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
When converting interface names to UCI network names
webadmin fails if there is no UCI network name because
webadmin failed to ensure uciname has a value before
attempting to take a substring.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
Do not assume that the "raw" table is present on any system, instead check
/proc/net/ip{,6}_tables_names to determine which iptables tables are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Adds Korean language supported for Luci of OpenWRT. Most of msgs which
shown at UI are translated but still not completed for non-popular
features.
Signed-off-by: Weongyo Jeong <weongyo@gmail.com>
Commit 39ff053890 accidentally removed the conffiles definitions
from luci-base, statistics, splash and diag-devinfo apps.
That has caused existing config files to get overwritten if the
package has been reinstalled via opkg. Additionally, the splash
text files have not been saved in sysupgrade or backup as they
are located outside /etc/config
This commit adds back the conffiles definitions to the respective
packages.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Changes:
Saratov, Russia switches from +03 to +04 on 2016-12-04 at 02:00.
This hives off a new zone Europe/Saratov from Europe/Volgograd.
The new zone Asia/Atyrau for Atyraū Region, Kazakhstan, is like
Asia/Aqtau except it switched from +04/+05 to +05/+06 in spring
1999, not fall 1994.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The expiry time in an odhcpd lease file line may be -1 to denote an infinite
lease time, so adjust the code to properly support that.
The expiry attribute of the lease object will be set to "false" in case of an
infinite lease.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Note that several of the time zones now use a numeric name
that is quoted with < > (e.g. "<+03>-3")
musl 1.1.15 and earlier have a bug with < > quoted time zone names.
Fix for the bug
* has already been patched in musl upstream with
http://git.musl-libc.org/cgit/musl/commit/?id=8ca27ac4bfe73bff785d0c26c1de0da92b55e5c6
* has been committed in LEDE with
671cb35880
* has been submitted to Openwrt as pull request
https://github.com/openwrt/openwrt/pull/163
Key changes in 2016d-2016i:
---------------------------
2016d:
America/Caracas switches from -0430 to -04 on 2016-05-01.
Asia/Magadan switches from +10 to +11 on 2016-04-24.
New zone Asia/Tomsk, split off from Asia/Novosibirsk.
2016f:
Asia/Novosibirsk switches from +06 to +07 on 2016-07-24.
Asia/Novokuznetsk and Asia/Novosibirsk now use numeric time zone
abbreviations instead of invented ones.
2016g:
Turkey switched from EET/EEST (+02/+03) to permanent +03,
effective 2016-09-07. Use "+03" rather than an invented
abbreviation for the new time.
Several zones in Antarctica and the former Soviet Union, along
with zones intended for ships at sea that cannot use POSIX TZ
strings, now use numeric time zone abbreviations instead of
invented or obsolete alphanumeric abbreviations.
2016h:
Asia/Gaza and Asia/Hebron end DST on 2016-10-29, not
2016-10-21. Predict that future fall transitions will
be on the last Saturday of October.
Asia/Colombo now uses numeric time zone abbreviations like "+0530"
instead of alphabetic ones like "IST" and "LKT".
2016i:
Pacific/Tongatapu begins DST on 2016-11-06, ending on
2017-01-15. Assume future observances in Tonga will be
from the first Sunday in November through the third Sunday in
January, like Fiji. Switch to numeric time zone abbreviations
for this zone.
Northern Cyprus is now +03 year round, causing a split in Cyprus
time zones starting 2016-10-30 at 04:00. This creates a zone
Asia/Famagusta.
Antarctica/Casey switched from +08 to +11 on 2016-10-22.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit d4c3372020.
PATH inconsistencies and Host/Install arguments have been fixed in both
LEDE and OpenWrt, so we can revert the revert.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Now that luci-mod-admin-full figures out the proper diagnostics host
during postinstall we can remove the UCI section from the default
configuration file.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
OpenWrt doesn't provide an argument to Host/Install like LEDE does; use
HOST_BUILD_PREFIX instead, which is available on both.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Also, don't make any assumptions about the staging dir lua and LuaSrcDiet
were installed to.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fix the JavaScript String.format() to not trigger an exception if the argument
for an escaped format like %h or %q is undefined.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Wireless monitor interfaces usually have no SSID set in their config and
various network model utility functions did not handle this case properly,
mainly while trying to incorperate the SSID string into various description
labels.
Fall back to the internal network id (radioX.networkY) in cases where neither
the SSID nor the BSSID are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
In mod metamethod, execute string format under pcall() and rethrow error in
caller context to report caller of function in errors and not the meta
method itself.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
An lua interpreter is required on the building host to run the
luasrcdiet lua script. Due to a build change, the interpreter was not
being installed to the correct location.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Cleanup /etc/config/ucitrack by removing '6relayd' item,
as the whole 6relayd package was removed in 2014.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Otherwize the distrevision may be displayed twice if it contains some special matching patterns.(For example I am using "git-$hash" in my own OpenWrt branch.)
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Fix the underlying _iface_ignore() function to not ignore virtual interfaces,
in order to let ignore_interface() return true for PPP and similar devices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Check the location of the odhcpd leasefile from /etc/config/dhcp
via uci. Fallback to the default location.
This fixes#702
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Using tristate is counter-intuitive and probably doesn't provide a lot
of benefit so we use a boolean and treat "don't know" as false (because
it is safer than showing options that are not actually available).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Fix display of WAN status when WAN is provided by using WWAN device or similar with other similar similar methods.
Explanation:
Before this, protocol was fetched from /etc/config/network for interface which often is wan_4 - but protocol is configured in file as wan, and therefore protocol is always none, since configuration is made for wan and then setup as wan_4 and possibly wan_6 if ipv6 is being used. This commit uses ubus to get used active protocol. For example, in case of qmi, it displays protocol as dhcp since even if I configured wan to use qmi, dhcp was used as a protocol for getting IP address.
Update timezone data to 2016c.
2016b: http://mm.icann.org/pipermail/tz-announce/2016-March/000036.html
Changes affecting future time stamps
New zones Europe/Astrakhan and Europe/Ulyanovsk for Astrakhan and
Ulyanovsk Oblasts, Russia, both of which will switch from +03 to +04
on 2016-03-27 at 02:00 local time. They need distinct zones since
their post-1970 histories disagree. New zone Asia/Barnaul for Altai
Krai and Altai Republic, Russia, which will switch from +06 to +07
on the same date and local time. Also, Asia/Sakhalin moves from +10
to +11 on 2016-03-27 at 02:00.
As a trial of a new system that needs less information to be made up,
the new zones use numeric time zone abbreviations like "+04"
instead of invented abbreviations like "ASTT".
Haiti will not observe DST in 2016.
Palestine's spring-forward transition on 2016-03-26 is at 01:00,
not 00:00. Guess future transitions will be March's last Saturday
at 01:00, not March's last Friday at 24:00.
2016c: http://mm.icann.org/pipermail/tz-announce/2016-March/000037.html
Changes affecting future time stamps
Azerbaijan no longer observes DST.
Chile reverts from permanent to seasonal DST.
Guess that future transitions are August's and May's second
Saturdays at 24:00 mainland time. Also, call the period from
2014-09-07 through 2016-05-14 daylight saving time instead of
standard time, as that seems more appropriate now.
Note for Openwrt usage:
Either musl or busybox does not like the new timezone format.
Although the rule looks ok in /etc/TZ, timezone is interpreted wrongly
by date, uptime etc. "Old timezones" are handle correctly, but these
new "<+04>-4" style zones do not work. Example below:
Europe/Helsinki
root@OpenWrt:~# cat /etc/TZ
EET-2EEST,M3.5.0/3,M10.5.0/4
root@OpenWrt:~# uptime
11:00:52 up 18:17, load average: 0.43, 0.13, 0.11
root@OpenWrt:~# date
Wed Mar 30 11:00:55 EEST 2016
Europe/Astrakhan
( Time is showed as GMT instead of the correct zone and
zone name is parsed wrongly )
root@OpenWrt:~# cat /etc/TZ
<+04>-4
root@OpenWrt:~# uptime
08:02:52 up 18:19, load average: 0.17, 0.18, 0.13
root@OpenWrt:~# date
Wed Mar 30 08:02:59 +04>-4 2016
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Some packages have different variants that have different
capabilities depending on which libraries against which
they are linked. Add a function to check which library a
binary links against in order to determine available
functionality.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Fix a bug introduced by #561
Function 'shellsqescape' calls 'gsub' with the empty result string 'res'
instead of the actual parameter 'value'. This leads into error:
.../util.lua:160: bad argument #1 to 'gsub' (string expected, got nil)
Fix error by passing the correct parameter to the function.
After the fix, the unmount button introduced by #561 finally works.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also
the 'nat' table for ipv6, and packages like 'adblock' utilize that table.
Currently that table is not shown on the Luci firewall status page,
although it is visible by 'ip6tables -L -v -t nat' from console.
Detect 'nat' table's presence from /proc/net/ip6_tables_names
Show 'nat' table in Status->Firewall->IPv6 if that table is present.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The version string displayed in the footer and the overview page contains
both LuCI and Openwrt versions. But due to differences in the contents
of /etc/openwrt_release the exact Openwrt revision r..... may be missing:
* In trunk that revision is included in the DISTRIB_DESCRIPTION field that
is displayed in Luci as the Openwrt version.
* In release branches, that field contains the release number like 15.05.
Revision number is always present in DISTRIB_REVISION field, so add the
revision from that field in case the revision is not already present
in the string.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adjust luci.mk and luci-base to find out correctly if Luci is built
from master or from a branch. Display that value in the footer and
the overview page.
* Evaluate the git branch in luci.mk and pass that to LuCI submodules
as a make variable. Use branch name, ignore tags.
* Deprecate svn detection in luci-base's mkversion.sh that generates
version.lua. Simply use the value passed by make.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Add an empty, normally invisible label after checkboxes and radio buttons
with cbi-input-{checkbox,radio} classes to allow CSS styling them as
suggested on http://www.paulund.co.uk/style-checkboxes-with-css
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
