Recent versions of mosquitto have added a lot more fine grained control
of various options. Add UCI support for all of them, and fix a couple
of things that were configured as per listener, that are actually global
settings.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Maintainer: me
Build system: Arch Linux x86_64
Build tested: ipq806x/R7800
Run tested : ipq806x/R7800
Signed-off-by: Daniel Bermond <danielbermond@gmail.com>
Change the interface protocol prefix from "bonding-" to "bond-".
This allows longer custom interface names and useful for VLANs.
Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>
On buildbots the build fails because git isn't finding any git repo and
then AC_INIT refuses to run:
fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
configure.ac:5: error: AC_INIT should be called with package and version arguments
Address this by substituting the git command with $(PKG_VERSION).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* replaced pipe input for a while/read-loop with a here document/variable as input
(fix various subshell related bugs and oddities)
* further improve abort and re-connection handling
* prevent alleged detected connection failures (false positives) with an additional gw check,
to stabilize VPN connections in particular
Signed-off-by: Dirk Brenken <dev@brenken.org>
This fixes compilation issues with ASLR PIE enabled
We were compiling with '-g -DDEBUG'
https-dns-proxy_2021-07-29-*_arm_cortex-a9_vfpv3-d16.ipk
shrink from 19514 to 19095
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
This init script allows to start the Kea Control Agent, the DHCPv4
server, the DHCPv6 server, and the DHCP-DDNS server. It expects the
config files to be where the packages install them.
As this is a single init script that can start 4 different binaries that
are each in their own package, these files cannot be included in any of
these other package, so create a dedicated package for it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This allows running multiple kea instances in load balancing or
hot-standby mode, minimizing risk of downtime.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* simplify the scan logic, to get rid of nifty IFS tricks
* limit the nearby scan results to process only the strongest uplinks, set 'trm_maxscan' accordingly (default '10')
* update the readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
but keep it selected by default as before
so it could be selected if nmbd and/or wssd2
should be used
Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
On hosts that have pcapnav-config installed, there is host lib leakage.
From config.log:
LNAVLIB='-L/usr/lib64 -lpcapnav -lpcap'
LNAV_CFLAGS='-I/usr/include'
Fix this by disabling pcapnav-config, which isn't available anyway.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* support the new travelmate option 'macaddr' to use a pre-defined MAC address (per uplink)
* vpn connections are now handled separately for each uplink
* The autoadd-feature for adding open uplinks will now be limited by the 'trm_maxautoadd' option. The default is '5', '0' disables this limitation.
* more code cleanups und optimizations to reduce the repetitive connection handling workload
* bugfixes regarding multiple radio support
* refine cp detection (no longer write and parse an error file)
Signed-off-by: Dirk Brenken <dev@brenken.org>
TARGET_CXX is added, because PowerDNS now uses C++17.
pdns.conf-dist is updated to the latest version shipped by PowerDNS.
010-time_t-check.patch, which is also used in pdns-recursor and dnsdist,
is added to patch out the check for 64-bit time_t,
because OpenWrt still supports 32-bit devices.
100-pdns-disable-pdns.conf-dist.patch is refreshed.
Signed-off-by: Wout Bertrums <wout@wbnet.eu>
* supports newer shellcheck
* restore EXTRA_COMMANDS compatibility with 19.07
* move status display from various functions to status_service
* bugfix: status_service line break after output
* minor arythmetic fix in status_service
Signed-off-by: Stan Grishin <stangri@melmac.net>
Backport a pending patch in order to DSCP-mark UDP traffic. This allows for
correct binning of traffic in diffserv-capable routers.
Additionally, remove Rosen Penev from the maintainers list, as per his request.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Description: Lack of support of HTTP/2 by default starts to hurt,
for example with https-dns-proxy package, some DoH resolvers (like mullvad)
no longer support HTTP/1 and are not usable.
This enables HTTP/2 support by default (which would bring ~68Kb libnghttp).
Signed-off-by: Stan Grishin <stangri@melmac.net>
* update binary to the latest commit (2021-07-29) to fix#16222 and #16239
* add hotplug.d/iface file and update Makefile to install it
* use Cloudflare's and Google's bootstrap DNS if bootstrap DNS is missing
* minor improvements in append_bool function
* add append_counter function for verbosity setting
* add append_bootstrap function (and supporting functions) to parse/sanitize bootstrap setting
* move firewall array from 'main' instance to the first proxy instance
* delete useless 'main' instace
Signed-off-by: Stan Grishin <stangri@melmac.net>
Open vSwitch supports SSL to connect to an OpenFlow controller. This is
recommended for security. Expand the UCI ovs config section to allow
configuring SSL CA, certificate and private key.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The Open vSwitch init script does not set USE_PROCD=1. Instead, it
defines most of the functions and variables that would be set when
USE_PROCD is set to 1, but with some minor changes.
The basescript variable however, which is used when calling
procd_open_service and procd_kill, is not set. As a result, basename of
the contents of the initscript variable is used as the service name. As
the service is automatically started via its symlink in /etc/rc.d,
S15openvswitch, the service name is S15openvswitch.
Set the basescript variable so that the service name is openvswitch.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
By default, Open vSwitch will generate the OpenFlow datapath ID of a
bridge based on the MAC address of one of its ports. Due to this, it's
possible that the datapath ID changes when new ports are added. When the
datapath ID changes, Open vSwitch disconnects from the controller, as
there is no way to notify the controller that the datapath ID has
changed.
Add an option to set the datapath ID so that the above situation can be
avoided. The option takes either exactly 16 hex characters, or when
prefixed with 0x, between 1 and 16 hex characters.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The config symbol is named CONFIG_OPENVSWITCH_WITH_LIBUNBOUND, so check
for that instead of the non-existent CONFIG_OPENVSWITCH_WITH_UNBOUND.
Fixes: 45c8cc9d8a ("openvswitch: make libunbound optional")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
support for 21.02.0-rc2 and up
support for reloading a single interface on ifup/ifupdate
rename config file
updated shellcheck compatibility
remove obsolete create/remove_lock
interface processing optimizations to speed up reloads
drop dependency on curl in user scripts
uniform styling of functions
Signed-off-by: Stan Grishin <stangri@melmac.net>
Installing openvswitch on an x86/64 snapshot image pulls in a bunch of
dependencies, good for a total size of 3648406 byte. Disabling
libunbound reduces that with 559941 byte, for a total of 3088465 byte.
This is quite a big reduction for a small tradeoff: without libunbound,
hostnames can not be used to specify OpenFlow managers or controllers.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* code cleanup
* add auto login script for Julianahoeve beach resort (NL)
* add auto login script for Vodafone hotspots (DE)
* add auto login script for telekom hotspots (DE)
* enhance captive portal detection to support html redirects as well
* change default captive portal detection url to
'detectportal.firefox.com'
Signed-off-by: Dirk Brenken <dev@brenken.org>
Building without the mirror-tarballs fails to PKG_SOURCE_SUBDIR not
matching the hostapd source subdir name. Fix that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The current way to add ports to an Open vSwitch bridge does not allow
complex port configurations. Use a dedicated uci config section per port
instead of the current port:type syntax. This way we can easily support
more features like setting the VLAN tag or the OpenFlow port number.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Calling the ovs_bridge_init function when stopping the service will
result in ovs-vsctl being called after ovsdb-server has been shut down.
This causes the following error:
ovs-vsctl: unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory)
Calling the ovs_bridge_init function when requesting the service status
has no added value.
Only call ovs_bridge_init during start or restart to fix this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
CI run fails due to dirty patches, so refresh them.
Fixes: f4f1a25e80 ("openvswitch: bump to version 2.15.0")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Include default configuration files to have something to start from.
Also include snort2lua to help convert snort2 rules to snort3 to also
help with bootstrapping the configuration.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>
bugfix: domain names bypass
rename config file
update Makefile
updated README link
updated shellcheck compatibility
support for 21.02.0-rc2 and later
updated code for interface triggers
add newline to test.sh
Signed-off-by: Stan Grishin <stangri@melmac.net>
- Bump yggdrasil-go version to v0.4.0
- Update ygguci tool for compatibility with the new yggdrasil-go version
- Yggdrasil's config file is now generated in a separate command before running the daemon
Signed-off-by: George Iv <zhoreeq@users.noreply.github.com>
This matches an ipv4 change in 21f5cdd2fa and has the same rationale.
Google requires https for both ipv6 and ipv6.
Signed-off-by: Scott Lamb <slamb@slamb.org>
A simple DNS proxy server that supports all existing DNS protocols
including DNS-over-TLS, DNS-over-HTTPS, DNSCrypt, and DNS-over-QUIC.
Moreover, it can work as a DNS-over-HTTPS, DNS-over-TLS or
DNS-over-QUIC server.
For documents, see https://github.com/AdguardTeam/dnsproxy.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
A simple command line utility to make DNS lookups. Supports all known
DNS protocols: plain DNS, DoH, DoT, DoQ, DNSCrypt.
For documents, see https://github.com/ameshkov/dnslookup.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways:
MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example.
Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely.
Signed-off-by: Damien Mascord <tusker@tusker.org>
User that don't control both OpenVPN client and server
might still need LZO support, so keep it enable by default for at least
OpenSSL variant.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
The commit updating the seccomp filter didn't bump PKG_RELEASE.
Do that now.
Fixes: 1141ee1e5 ("transmission: add new syscalls to seccomp filter)"
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Testing showed that additional syscalls are needed on ARMv7.
Add "getegid32", "geteuid32", "getgid32" and "getrandom" as they are
all innocent.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
555268b ubus: filter neighbors by SSID when preparing nr
3db9607 data storage: match SSID when searching ap entry
a22f5a7 storage: ensure SSID strings are NULL-terminated
Signed-off-by: Nick Hainke <vincent@systemli.org>
Makefile changes include:
* Remove USE_UCLIBC, as uclibc is no longer supported
* Package output modules
* Move main binary (back) to /usr/sbin, as it is system administration
related and requires superuser privileges
New patches:
* 003-add-space-for-null-byte.patch - from
374cfd2cab
* 004-more-specific-library-linking.patch - from
27b57d9da3
* 005-use-c99-format-macro-constants.patch - from
https://github.com/fln/addrwatch/pull/28
Init script changes include:
* Change from explicit disable to explicit enable, so that the service
is disabled by default and on first install
* Set config option default values to default values of the main binary
* Fix command-line option names and format (from
https://forum.openwrt.org/t/cant-start-addrwatch-service/60499/3)
* Always use the --quiet command-line option, as the procd instance is
not configured to capture stdout/stderr
* Change the syslog config option to start the syslog output module
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Until now the additional tables listed in gobal 'rt_table_lookup' were
not considered for interfaces.
In order to be able to also use interface-defined routes from tables
other than main, consider also tables listed in 'rt_table_lookup'.
Update version to 2.10.10 as requested by maintainer.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* add a tcpdump option to resolve IPs in adblock reporting,
set 'adb_represolve' accordingly (disabled by default). If enabled
tcpdump will perform a reverse DNS (PTR) lookup for each IP address
* add 'stalkerware' source (provided by @astryzia)
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
This option sets the interface of the policy.
Also from Vincent Wiemann <vincent.wiemann@ironai.com>.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Use list's where appropriate for multi-value config variables.
Forbid absolute/relative paths for certificate and key files.
Get rid of last remnants of left/right naming.
Factor invariant code paths.
Drop redundant secrets.rsa.filename section.
Thanks to Vincent Wiemann <vincent.wiemann@ironai.com> for calling
out many of these improvements.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
We enable the option by default, but do not depend on the kernel modules
required for L2TP offloading to avoid wasting space when the feature is
not needed. To use offloading, kmod-l2tp-eth must be installed.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
The UMAC-based methods provide higher performance than GMAC and aren't
suspectible to timing attacks when implemented in software (which is
always the case on OpenWrt, as OpenSSL support is disabled). Disable
GMAC by default to save a few KiB.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Switch to AUTORELEASE to avoid bumping PKG_RELEASE all the time.
Run shell scripts through shfmt -w -ci -bn -sr -s in order to have a
standard style.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Give this package more love by adopting it :)
Changes since 1.4.1-4:
* change maintainer to me
* update to 1.4.3
+ add example config files sockd.conf and socks.conf
+ add service file for sockd
* update 200-fix-RTLD_NEXT.patch
- remove merged 210-deactivate-sched_setscheduler.patch
* fix Autoconf build file
Signed-off-by: David Yang <mmyangfl@gmail.com>
Add limited procd support to handle config reload
Option drop_unknown_ports can be used to ensure that only configured ports
are part of the bridge
Signed-off-by: Felix Fietkau <nbd@nbd.name>
As a daemon service, respawn is expected by default, and we have that
facility available via procd.
Suggested-in: https://github.com/openwrt/packages/pull/15272
Signed-off-by: Karl Palsson <karlp@etactica.com>
If pppoe is used for wan access. script set 'eth1' as interface for curl
call. The correct interface is however 'pppoe-wan'.
The script uses 'network_get_physdev' function to get real device for
bind_network but this is wrong. We need instead the l3_device of the the
logical interface.
In case if we don't use pppoe connection - 'l3_device' is equal to real device.
This was reported by the github user `welderpb` with P/R:
https://github.com/openwrt/packages/pull/14431
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The chrony interface hotplug script reuses the handle_allow function
from the init script to allow NTP access on interfaces specified in uci.
The function requires /lib/functions/network.sh. Include the file in the
hotplug script to make the function work as expected.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
Fix a possible security issue with OpenSSL config autoloading on Windows (CVE-2021-3606).
Include a number of small improvements and bug fixes.
remove upstreamed: 115-fix-mbedtls-without-renegotiation.patch
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
There were closing curly braces missing and it was checking for empty
strings while it should have been checking for non-empty strings.
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
Variables set in config_ipsec() need to be shared with do_postamble()
function, so change scoping to parent (prepare_env()).
Also, remove unused settings like "remote_sourceip", "reqid", and
"packet_marker".
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Link to abandoned packages PR: https://github.com/openwrt/packages-abandoned/pull/18
AppleShare products have been unused for a while now (since Mac OS 9.2.2)
around 2002.
So, there should be fewer users requiring this package.
Last update of netatalk was in December 2018. Not sure if newer updates
will be created.
It's time to cut the cord on our end and move it to the abandoned packages.
Info: https://en.wikipedia.org/wiki/AppleShare
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Support for wolfSSL has been upstreamed to the master OpenVPN branch
in f6dca235ae560597a0763f0c98fcc9130b80ccf4 so we can use wolfSSL
directly in OpenVPN. So no more needed differnt SSL engine for OpenVPN
in systems based on wolfSSL library
Compiled && tested on ramips/mt7620, ramips/mt7621
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
configure script looks for host ssh. Just pass the configure variable
directly. --with-ssh doesn't work.
Also get rid of custom Compile section. It's not needed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* fix a small json syntax issue in adblock.sources
* add easylist addon to reg_fr source
* add switch 'adb_fetchinsecure' to allow insecure downloads
without certificate check (disabled by default)
* better explain 'adb_fetchparm' in readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
This is a security and bugfix release.
Full release notes: https://mosquitto.org/blog/2021/06/version-2-0-11-released/
Fixes a remotely triggered memory leak
Fixes broker reconnections in certain failure situations
Fixes (non-standard) qos0 queuing
Signed-off-by: Karl Palsson <karlp@etactica.com>
Isochronous round trip time tool.
Useful for measuring one-way send or recv delay between hosts,
among other things.
Signed-off-by: Marcel Vital <ralmina@tuta.io>
Remove myself as maintainer from PowerDNS Related packages and add
Peter van Dijk from PowerDNS as the new maintainer
Signed-off-by: James Taylor <james@jtaylor.id.au>
ipsec uses starter, and reads /etc/ipsec.conf (which then includes
/var/ipsec/ipsec.conf, etc). This is overly complicated, and can
be problematic if you're using both swanctl and ipsec for migration.
Running charon directly from procd via the init.d script avoid
all of this.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Seeing the following error when running 'make defconfig':
tmp/.config-package.in:69874:warning: multi-line strings not supported
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Sierra Wireless modems need the string '$GPS_START' to be sent to the
GPS tty device as only then the modem firmware starts emitting
NMEA-0183 sentences.
Add an option 'sierragpsstart' to kplex' serial driver to support that
quirk as kplex can be very useful to spread GPS data over the network
while also supplying 'ugps' using a PTY, allowing for correct system
time to be set automatically on boot up from GPS.
This patch is also PR'ed at the upstream project:
https://github.com/stripydog/kplex/pull/54
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes the build problem below.
Package miniupnpd is missing dependencies for the following libraries:
libmnl.so.0
libnetfilter_conntrack.so.3
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
- New upstream major release with tons of new features and LTS (see: https://www.haproxy.com/blog/announcing-haproxy-2-4/)
- Update haproxy download URL and hash
- Activate promtheus exporter support the new way (using USE_PROMEX=1)
- Cleaned up haproxy-specific CFLAGS
- Changed the halog build to make use of the new Makefile target (admin/halog/halog)
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Rrsync is a perl script that is supplied as an extra with the rsync program.
It must be used in conjunction with openssh-server or openssh-server-pam
as it requires ~/.ssh/authorized_keys which is not supported by dropbear.
Rrsync allows selective access to subdirectories in either read-only, write-only or read-write,
depending on settings in authorized_keys. This allows for safe, restrictive access.
It's particularly useful for automated backup purposes.
An example usage would be this entry:
command="/usr/bin/rrsync -ro /home" <public key here>
This would allow a system connecting with this public key to be able to rsync FROM the
/home directory tree only. It could not write to this directory, nor read from any other directory.
Signed-off-by: Matt Reeve <matt@mreeve.com>
Recreate symbolic link if it's missing after a sysupgrade with a private and public key present in /etc/atlas/
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* Create working directory when it is not present. Apparently
some recent change made adguardhome fail to start when working
directory is missing.
* Full changelog available at:
* https://github.com/AdguardTeam/AdGuardHome/releases/tag/v0.106.1
Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
* fix pid file processing of the background monitor plus child
processes (bug reported in the forum)
* made the enabled/disabled switch of the background monitor functional
Signed-off-by: Dirk Brenken <dev@brenken.org>
Samplicator receives UDP datagrams on a given port and resends those
datagrams to a specified set of receivers.
Use Cases:
- replicate Flow Samples to multiple receivers
- use with conntrackd to synchronize via unicast to multiple targets
Signed-off-by: Nick Hainke <vincent@systemli.org>
In the procd refactor, support for interfaces with no tracking IPs was
inadvertentiy removed. This commit restores the previous behavior
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Fixes the following security issues:
* CVE-2021-25215 - named crashed when a DNAME record placed in the ANSWER
section during DNAME chasing turned out to be the final
answer to a client query.
* CVE-2021-25214 - Insufficient IXFR checks could result in named serving a
zone without an SOA record at the apex, leading to a
RUNTIME_CHECK assertion failure when the zone was
subsequently refreshed. This has been fixed by adding an
owner name check for all SOA records which are included
in a zone transfer.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Using `$(INSTALL_CONF)` will cause the program has no access to
configurations file when someone enabled the selinux support.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Xray now is no longer planning to keep compatibility with original
v2ray. Remove PROVIDES before it is totally broken.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
From mosquitto 2.x, port became optional and deprecated in the config,
and it was recommended that listeners be used instead. Drop the hard
requirement in our config conversion script.
Reported in: https://github.com/openwrt/packages/issues/15506
Signed-off-by: <karlp@etactica.com>
Maintainer: @neheb / @BKPepe / @zhanhb
Compile tested: ipq806x, generic, netgear_r7800, master
Run tested: ipq806x, generic, netgear_r7800, openwrt-19.07
Description:
Squid now only support HTTPS proxy in TCP tunnel mode (e.g. `ssl_bump splice all`):
https_port 3128 ssl-bump tls-cert=/etc/squid/squid.pem generate-host-certificates=on
ssl_bump splice all
In order to operate in SSL Bump mode, we need to compile with `--enable-ssl-crtd` for following configuration:
https_port 3128 ssl-bump tls-cert=/etc/squid/squid.pem generate-host-certificates=on
sslcrtd_program /usr/lib/squid/security_file_certgen -s /car/cache/squid/ssl_db -M 4MB
ssl_bump stare all
ssl_bump bump all
This PR switch the `SQUID_enable-ssl-crtd` into `default y`, therefore default enable SSL Bump mode.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
Staging certificates have the advantage that their retry limits are loose.
Therefore they can be obtained quickly when automatic retries are used.
Unfortunately they can not be used for deployments because their CA is not
accepted by clients. Production certificates do not have this limitation, but
their retry limits are strict. For production certificates, automatic retries
can only be performed a few times per hour. This makes automatic obtainment of
certificates tenacious.
With use_auto_staging=1, the advantages of the two certificate types are
combined. Uacme will first obtain a staging certificate. When the staging
certificate is successfully obtained, uacme will switch and obtain a production
certificate. Since the staging certificate has already been successfully
obtained, we can ensure that the production certificate is successfully
obtained in the first attempt. This means that "retries" are performed on the
staging certificate and the production certificate is obtained in the first
attempt.
In summary, this feature enables fast obtaining of production certificates when
automatic retries are used.
By default, this feature is set to use_auto_staging=0, which means that
uacme will behave as before by default.
Signed-off-by: Leonardo Mörlein <git@irrelefant.net>
With this commit, issue_cert() can be called multiple times alternating
between staging and production certificates within a script.
Before this commit, the production state dir was stored in $STATE_DIR.
But in the case of $use_staging=1, this variable was overwritten in
issue_cert() with $STAGING_STATE_DIR. This made it impossible to call
issue_cert() with $use_staging=0 afterwards. Now the production state
dir is stored in $PRODUCTION_STATE_DIR. This way it is not overridden
anymore and issue_cert() can be called multiple times alternating with
production and staging.
Signed-off-by: Leonardo Mörlein <git@irrelefant.net>
The get_bool() functionality was already merged to lib/functions.sh, so
it is redundant in the init script. Remove it.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
- ignore Content-Length from backend if 101 Switching Protocols
- close HTTP/2 connection after bad password
- skip cert chain build for self-issued certs
- meson zstd fix
- ls-hpack upstream update
- discard some HTTP/2 DATA frames received after response
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
- Exit start if a probe_key is not present
- Add create_key command to generate a private_key based on the provided username in the atlas config.
- Add registration instruction in /etc/atlas
- Rework script to save probe_key on sysupgrade (the key are now adviced to be placed in the /etc/atlas dir and a link is used to make them accessible in the atlas-sw-scripts etc dir)
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* lots of fixes for many subsystems
* new messenger group chat service
* 'abd' temporarily removed due to upstream issue
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes two related security vulnerabilities (CVE-2020-15078) which
under very specific circumstances allow tricking a server using delayed
authentication (plugin or management) into returning a PUSH_REPLY before
the AUTH_FAILED message, which can possibly be used to gather
information about a VPN setup. In combination with "--auth-gen-token" or
a user-specific token auth solution it can be possible to get access to
a VPN with an otherwise-invalid account.
OpenVPN 2.5.2 also includes other bug fixes and improvements.
Add CI build test script.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* add a "whitelist only" mode, this option allows to restrict Internet
access from/to a small number of secure websites/IPs, and block access
from/to the rest of the Internet.
Signed-off-by: Dirk Brenken <dev@brenken.org>
This commit is largely based on the work from Daniel Dickinson in
PR #2096 which was never merged. I tweaked it in a number of ways.
All bugs with this package are mine, not his.
Signed-off-by: Aaron Curley <accwebs@gmail.com>
* support the RPZ trigger 'RPZ-CLIENT-IP' to always allow/block certain
clients based on their IP (currently only supported by bind!)
* avoid promiscuous mode in tcpdump setup for adblock reporting
* speed up dns report preparation
* support dns report mailing (/etc/init.d/adblock report mail)
* fix bind autodetection
* update LuCI-frontend (separate PR)
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
NLS means Native Language Support and when you have it enabled (it is
not default), clamav can not be compiled as it shows following error:
Package clamav is missing dependencies for the following libraries:
libiconv.so.2
Also, it is required that package libiconv-full is compiled first/before
than clamav and then try to compile clamav.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
/etc/profile.d/50-openvpn-easy-rsa.sh was not listed as configfile
and changes were lost during upgrades.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
libseccomp can't be built on ARC, so we must disable the option here as
well. A different fix was first proposed by @zxlhhyccc in #15377.
Fixes: #15313
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Add patch fixing compilation without deprecated OpenSSL APIs.
Fix installation. This never worked as the section was misnamed.
Updated tool names.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
chacha20policy1305 is also an AEAD cipher, and hence does not
permit a hash algorithm.
Fixes issue #15397.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
This patch prevents multiple cron jobs from being created to run the
safe-search-maintenance script.
To reproduce this bug, perform the following:
- Install safe-search
- Perform an OpenWRT firmware upgrade (choose to preserve user settings)
- Install safe-search again
Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
The strongswan-libnttfft package should not select the strongswan
package, but should depend on it instead. Otherwise a circular
dependency is created.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Rework the bonding.sh protocol handler to accept slave interface names
encoded in uci list notation. Also replace ifconfig up/down with ip
link calls while we're at it.
Fixes: #11455
Fixes: https://github.com/openwrt/luci/issues/4473
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
MacOS ignores Bonjour services for which TXT records are not returned. This changes forces umdns service to return a TXT record (`daemon=ksmbd`) for the ksmbd service. The exact content is unimportant and to the best of my knowledge nothing reads the `daemon` tag.
Symptoms of the problem (which are also debugging steps):
* Finder refuses to open the OpenWRT "computer" in the Network list.
* Discovery.app (Bonjour Browser) lists the _ssh._tcp service, but the submenu for it doesn't unfold and no address is shown.
* `dns-sd -L OpenWrt _smb._tcp` doesn't return any address.
Signed-off-by: Kirill Nikolaev <cyril7@gmail.com>
This is a security fix, affecting 2.0.0 through to 2.0.9. Mosquitto instances
could be remotely DoS'd by authenticated clients.
Release notes at: https://github.com/eclipse/mosquitto/blob/v2.0.10/ChangeLog.txt
CVE number has not yet been assigned.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Prior to this commit, the acme service attempted to obtain certificates
once and then terminated, regardless of whether the certificate could be
obtained or not. This commit introduces a new uci option "retries" to
the "certificate" section. If this option is set to N, the acme service
will attempt to obtain the certificate up to N times before terminating.
There is a waiting pause between the retries to comply with the rate
limits of Let'sEncrypt.
The waiting pause is:
- 2 minutes for staging certificates
- 24 minutes for production certificates
The current "Failed Validation" rate limits of Let'sEncrypt are:
- staging: 60 per hour -> 1 failure every 1 minute in avg.
- production: 5 per hour -> 1 failure every 12 minutes in avg.
This means that we are within rate limits by a factor of two.
By default the option "retries" is set to "1", which means that acme
behaves as before by default. If the variable is set to "0", infinite
retries are performed.
This feature is helpful, when you already want to initiate the
certificate request, but you are still waiting for your dns server to be
configured, your network to appear or other conditions.
Signed-off-by: Leonardo Mörlein <git@irrelefant.net>
Before this commit, issue_cert always returned 1 no matter if uacme
returned 1, 2, 3, ... With this commit, the return code of the uacme
binary is propagated. Therefore the caller of issue_cert can
differentiate between "no renew necessary" and "an error occurred".
Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
With this commit, the run-acme script can be included into other scripts
by setting INLCUDE_ONLY=1.
Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
Derived from the ipsec initd script, with the following changes:
(1) various code improvements, corrections (get rid of left/right
updown scripts, since there's only one), etc;
(2) add reauth and fragmentation parameters;
(3) add x.509 certificate-based authentication;
and other minor changes.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
netifyd supports a '-F' filter option in 'bpf' notation to filter
packets from its consideration.
Add support for a uci 'filter' option. eg. filter to exclude SSDP
multicasts from a particularly noisy device:
option filter 'not (udp and dst 239.255.255.250 and dst port 1900 and src 192.168.1.5)'
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Even it's only cosmetic and should not affect the function of regular system,
fix the name of the IPKG_INSTROOT variable.
Typo was added long ago with 8400c9a6ec.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Since v1.4.1, Xray has introduced a new feature to transfer data via
browsers, which can disguise itself as a normal browser to cheat
network censorship.
For more details, see https://github.com/XTLS/Xray-core/pull/421.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
If you shutdown ipsec service, and it doesn't clean up
/var/ipsec/ipsec.conf, then when you start swanctl service it
might see an incompatible file on startup. Remedy is to
remove unneeded files when shutting down the service. They
can always be regenerated when the service starts again.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
This commit adds a number of fixes to the OpenVPN up/down hotplug command
wrapper which currently fails to actually invoke user defined up and down
commands for uci configurations not using external native configurations.
- Use the `--setenv` to pass the user configured `up` and `down` commands
as `user_up` and `user_down` environment variables respectively
- Instead of attempting to scrape the `up` and `down` settings from the
(possibly generated) native OpenVPN configuration in
`/etc/hotplug.d/openvpn/01-user`, read them from the respective
environment variables instead
- Fix parsing of native configuration values in `get_openvpn_option()`;
first try to parse a given setting as single quoted value, then as
double quoted and finally as non-quoted, potentially white-space
escaped one. This ensures that `up '/bin/foo'` is interpreted as
`/bin/foo` and not `'/bin/foo'`
Ref: https://forum.openwrt.org/t/openvpn-up-down-configuration-ignored/91126
Supersedes: #15121, #15284
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The `tmate` tool is a fork of `tmux` which allows remote access to a
device without setting up any port forwarding. This commits adds the
backend server which handles connections.
Signed-off-by: Paul Spooren <mail@aparcar.org>
These config files are only used by the ipsec interface to charon,
and shouldn't be part of the base package.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* rework the central iptables function to significantly
reduce the code complexity and the overall number of iptables calls
* check early and only once in the chain for ctstate NEW and
return otherwise (thanks @ldir-EDB0)
* made the whitelist ordering within the chain more flexible
Signed-off-by: Dirk Brenken <dev@brenken.org>
faster to compile.
A small selection of packages was tested going from:
Executed in 696.30 secs fish external
usr time 82.98 mins 395.00 micros 82.98 mins
sys time 9.02 mins 0.00 micros 9.02 mins
to:
Executed in 592.20 secs fish external
usr time 84.84 mins 361.00 micros 84.84 mins
sys time 8.85 mins 57.00 micros 8.85 mins
Tested by running make -j 12 and wiping staging/build_dir/target_x
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Having scripts diddle user written config files seems potentially
dangerous. Plus there's really no downside to including some
empty files. Best to just make the includes be permanent.
Additional feature suggested by Luiz: if a -opkg version of the
config file was created unnecessarily, remove it as part of the
upgrade process since changes won't be happening to that file
as an artifact of the service starting. The include lines are
now permanent, which means that (1) additional configuration
synthesized by UCI won't be anywhere that opkg (or sysupgrade,
for that matter) cares about since it won't be persistent, and
(2) if changes are being made, then they're being done by a
person with an editor and they really should be distinguished.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
It seems the command name output from netstat can be truncated in weird
ways, so let's get the binary name from /proc instead and use that for
matching which listener we have.
Fixes#15071.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
* fix another IPv4/IPv6 related iptables chain creation problem
* fix counter during ipset creation
* fix regex for debug counters
* fix ipset housekeeping for local sources
Signed-off-by: Dirk Brenken <dev@brenken.org>
Reorganize Makefile for consistency between packages.
Switch to AUTORELEASE for simplicity.
Switch to building with Ninja for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* add a restrictive "jail mode only" variant, just point your
jail directory to your primary dns directory
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
Occasionally, mostly at startup, miniupnpd reports "Another app is
currently holding the xtables lock. Perhaps you want to use the -w
option?"
Take iptables' advice and wait up to 1 second before giving up.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tmate is a fork of tmux. It provides an instant pairing solution.
For more details, see https://tmate.io.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Neither the configure option nor configure variable to disable linking
against PCRE seem to work anymore, so simply drop both and add a
dependency on libpcre. As net-snmp is unlikely to fit on devices with
small flash anyway, the extra size requirement shouldn't be a problem.
If it is, feel free to submit a patch to fix the broken upstream
behaviour.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
If the interface goes into failure state (is disconnecting)
then with this change one hotplug.d event is generated.
The same is true for the recovery state (is connecting), when the interface
comes back from a failure state.
In both cases, a hotplug.d event for the iface is triggered. Once
with the $ACTION=disconnecting and once for the $ACTION=connecting.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* refine the new dns resolving process
* add a caching mechanism for the resolved IPs, the detached name
lookup takes place only during 'restart' or 'reload' action, 'start'
and 'refresh' actions are using an auto-generated backup instead.
* update the readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
This is a bugfix release, with minor security fixes for outgoing bridge
connections and the client library.
Full details here: https://mosquitto.org/blog/2021/03/version-2-0-9-released/
Signed-off-by: Karl Palsson <karlp@etactica.com>
Add "wg_check_interfaces" and specify a timeout in the config file.
This allows to delete not used wireguard-interfaces automatically.
For example a cronjob can be installed that calls:
. /usr/share/wginstaller/wg_functions.sh && wg_check_interfaces
Signed-off-by: Nick Hainke <vincent@systemli.org>
* black- and whitelist now supporting domain names as well - the
corresponding IPs (IPv4 & IPv6) will be resolved in a detached
background process and added to the IPsets
Signed-off-by: Dirk Brenken <dev@brenken.org>
Major change are:
ksmbd.control -s terminate ksmbd.mountd as well as kernel server.
Update configuration.txt and README.
Turn off smb2 leases by default again.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
While searching for the boost_system library in boost.m4, configure
tries to find boost_system-mt before boost_system. The presence of
boost_system-mt in the staging dir depends on
CONFIG_boost-use-name-tags. If it is not defined (default), and there
is a boost_system-mt library in the host system, it will be used, and
the build will fail.
This adds a patch to remove the host paths from the search loop,
preserving the rest of the detection logic.
Alternatively, boost_cv_lib_context_LIBS could be used to avoid library
detection code entirely, but then the mt- variant would never be used.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
The current default of hourly is too fast. Some services such as
DuckDuckGo return IPs from a pool based on the user's location instead
of a fixed IP address. This change prevents unnecessary writes to the
flash memory by only updating once per week.
Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
* add adguard_tracking source (list with cname trackers)
* optimize/sort output of active sources in status
* optimize log output in EMails
Signed-off-by: Dirk Brenken <dev@brenken.org>
Switch to CMake + Ninja to fix parallel compilation.
Switched PKG_BUILD_DIR to use PKG_INSTALL_DIR for easier readability.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Wireguard has no link-local address on an interface automatically.
Add a link-local to the interface. The server has fe80::1/64 and
the client fe80::2/64.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Convert to using CMake in order to speed up compilation and to fix
compilation under glibc.
Add extra dependencies since they're now needed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
After d18692c, we need to include nls.mk to setup correct
environment variables so that linking succeeds.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
remove AVX patches as upstream has integrated and closed
all AVX issues
compiled on : x86-64, i386 generic
tested on : x86-64 VM, i386 VM
Signed-off-by: Dirk Neukirchen <plntyk.lede@plntyk.name>
After d18692c, we need to include nls.mk to setup correct
environment variables so that linking succeeds.
Reported-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
After d18692c, we need to include nls.mk to setup correct
environment variables so that linking succeeds.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
By default, ping does a reverse DNS of the IP that you are pinging.
When you have a network issue (such as when a link has just gone down
and you haven't yet marked it down), this lookup can cause failures on
tests for links that are still good.
This option only works for iputils ping.
For busybox the option is not evaluated, but it is accepted without
throwing an error.
Fixes: #14968Fixes: #14924
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Suggested-by: David Lang <david@lang.hm>
Add a missing dependency on Lua. Otherwise the script installing the
neighbor report can't be executed in case Lua is not installed on the
system.
Signed-off-by: David Bauer <mail@david-bauer.net>
* major source changes:
* split oisd.nl in basic and full variant
* add swedish regional list
* made archive categories for shallalist and utcapitole selectable
via LuCI
* made all list variants of energized and stevenblack selectable
via LuCI
* removed dns filereset mode
Signed-off-by: Dirk Brenken <dev@brenken.org>
If used with default paths, libdaq 2.x and libdaq 3.x will overwrite
some of the other version's files. Install them in different places to
avoid trouble.
Snort is the only package that uses libdaq, so update it at the same
time to avoid creating a failing commit.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
If used with default paths, libdaq 2.x and libdaq 3.x will overwrite
some of the other version's files. Install them in different places to
avoid trouble.
Snort is the only package that uses libdaq, so update it at the same
time to avoid creating a failing commit.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Add GO111MODULE=auto to GO_PKG_BUILD_VARS to allow the package to be
built in non-module mode.
Module-aware mode will be mandatory in the next golang release.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Add GO111MODULE=auto to GO_PKG_BUILD_VARS to allow the package to be
built in non-module mode.
Module-aware mode will be mandatory in the next golang release.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Quote NEWS item
> - Building the Linux kernel module from the OVS source tree is
> deprecated
> * Support for the Linux kernel is capped at version 5.8
> * Only bug fixes for the Linux OOT kernel module will be accepted.
> * The Linux kernel module will be fully removed from the OVS source
> tree
> in OVS branch 2.18
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fixes spurious version bump done in 5c8fb42 and reported in #14815 and
switches source proto from git to codeload.
Upstream has changed daemon binary name to `/usr/sbin/mini-snmpd`.
Package and config/init script name stays unchanged.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
The crude loop I wrote to come up with this changeset:
find -L package/feeds/packages/ -name patches | \
sed 's/patches$/refresh/' | sort | xargs make
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Major changes for version 3.3.5 are:
- Rename "streams" parameter to "vfs objects = streams_xattr".
- Enable smb2 leases by default.
- Ignore ksmbd.subauth creation failure.
- Fix bugs that related to guest ok = yes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* fix search string/pipe preparation for the background service
* fix IPSet maxelem limitation, made it more flexible
* fix potential error during resume action
* add Cisco Talos IP blacklist
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add scanning for suspicious nginx events
* add a log counter to track the number of the failed requests
or login repetitions of the same ip in the log before banning,
defaults are: ssh (3), luci (3), nginx (5)
* optimize the background service handling
* add 'greensnow' as a new source
* update readme and LuCI frontend regarding the new log count options
Signed-off-by: Dirk Brenken <dev@brenken.org>
As suggested by others, I would like to take care of this tool. I am
developing certain tools that rely on the library and also owipcalc.
Signed-off-by: Nick Hainke <vincent@systemli.org>
This has been observed by myself and @luizluca: ip route get is
appending uid0 to the output, as seen from:
root@OpenWrt2:~# ip route get 1.1.1.1
1.1.1.1 via 174.27.160.1 dev eth3 src 174.27.182.184 uid 0
cache
root@OpenWrt2:~#
so the fix is an anchored match, discarding all else. Also, using
ip -o means never having to do multiline matches...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Separate owipcalc in client and lib part. Owipcalc brings a lot of nice
functionality with it, e.g. parsing and calculating prefixes.
Signed-off-by: Nick Hainke <vincent@systemli.org>
The second one was manually modified as quilt gets confused by the ***
and ends up removing the commit description.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The previous list was very out of date.
An always up-to-date v1-compatible list is available at:
https://download.dnscrypt.info/dnscrypt-resolvers/v1/
Also use different default resolvers since the previous ones don't
exist any longer.
Signed-off-by: Frank Denis <github@pureftpd.org>
Variable ICONV_DEPENDS is specified in nls.mk which can be found in
OpenWrt main repository.
This fixes issue:
/foo/build/staging_dir/toolchain-arm_cortex-a9+vfpv3-d16_gcc-8.4.0_musl_eabi/lib/gcc/arm-openwrt-linux-muslgnueabi/8.4.0/../../../../arm-openwrt-linux-muslgnueabi/bin/ld: cannot find -liconv
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Previous code was downloading file v1.3.0, which is wrong, because in
the dl folder there might be some tarballs with that naming and they are
wrong as well.
This could lead to some issues like this:
Hash of the local file v1.3.0.tar.gz does not match (file: 87cf846b02dde6328b84832287d8725d91f12f41366eecb4d59eeda1d6c7efdf, requested: b94fba0251a4a436e25b127d0b9bc0181b991631f1dc8e344b1c8e895b55375d) - deleting download.
Even though, if you tried it on SDK or minimal build when there is a
small number of packages, you most likely don't encounter it.
The correct solution is to download files with their name and version.
E.g. nebula-version.tar.gz as it is in PKG_SOURCE variable now.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Latest version of xray-core made a change to support FullCone NAT,
which would break UDP connection from v2ray-core backend server.
So added the option for v2ray-core users, to make sure UDP works
as expected.
Signed-off-by: Tianling Shen <cnsztl@project-openwrt.eu.org>
The SVN-based version has not changed in years. Many distros use this
fork as evident here: https://github.com/streambinder/vpnc/issues/14
Compile tested against GnuTLS and OpenSSL on ramips target.
Fixes#14119.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Add a hotplug.d-extension that automatically configures babeld for
meshing via wireguard interfaces.
It checks for "add" and "remove" of a wireguard interface with name
"wg_*". Depending on the action, it removes it from the babeld config
or adds the interface and reloads babeld.
Signed-off-by: Nick Hainke <vincent@systemli.org>
* add 'ban_extrasources' to handle banIP-unrelated sets for reporting
and queries
* add set timeouts for local sources (maclist, whitelist, blacklist)
Signed-off-by: Dirk Brenken <dev@brenken.org>
This tool can be used to automatically create wireguard tunnels. Using
rpcd a new wireguard interface is created on the server where the client
can connect to.
Wiregurad server automatically installs a user and associated ACL to use
the wireguard-installer-server features. The user is called wginstaller
and so is the password.
Get Usage:
wg-client-installer get_usage --ip 127.0.0.1 --user wginstaller
--password wginstaller
Register Interface:
wg-client-installer register --ip 127.0.0.1 --user wginstaller
--password wginstaller --bandwidth 10 --mtu 1400
Signed-off-by: Nick Hainke <vincent@systemli.org>
Not including an A record mapping will cause nsupdate to balk at
CNAME and MX records (and probably SRV as well) because the target
will be unknown at the time of parsing, until the lease gets
activated.
We need these RR's to be in place well before the servers even
come up.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Microsoft Windows, Xbox and possibly other operating systems do not
support IGDv2. With IGDv2 enabled, they send a HTTP GET request for
rootDesc.xml and WANIPCn.xml, and then nothing happens. The Microsoft
implementation probably doesn't like the WANIPCn.xml response and
decides UPnP is not available. When miniupnpd is built without IGDv2
support, after the 2 HTTP GET requests, there is a HTTP POST request to
/ctl/IPConn, and miniupnpd configures the port forward as expected.
The runtime option force_igd_desc_v1=yes (UCI: igvd1) does not solve
this problem. It's possible this was enough in earlier miniupnpd
versions, but it does not fix the problem the current version.
Since we are a modern distro, we want to support the latest and
greatest, so we should default to IGDv2 enabled. Introducing a
menuconfig option to disable IGDv2 would only help people who build
their own images, so offer a separate package variant for IGDv1.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* major rewrite
* add support for multiple chains
* add mac whitelisting
* add support for multiple ssh daemons in parallel
* add an ipset report engine
* add mail notifications
* add suspend/resume functions
* add a cron wrapper to set an ipset related auto-timer for
automatic blocklist updates
* add a list wrapper to add/remove blocklist sources
* add 19.x and Turris OS 5.x compatibility code
* sources stored in an external compressed json file
(/etc/banip/banip.sources.gz)
* change Country/ASN download sources (faster/more reliable)
* fix DHCPv6/icmpv6 issues
Signed-off-by: Dirk Brenken <dev@brenken.org>
Fix starting problem:
Starting function should be named 'start_service' instead of 'start_instance'.
Fix reloading problem:
Register reload tigger for uci config itself.
And, xray does not support reload currently, so use legacy restart as reload.
Fixes: 6c9b96352f ("xray-core: add init script")
Signed-off-by: Tianling Shen <cnsztl@project-openwrt.eu.org>
Major changes are:
add "vfs objects = acl_xattr" parameter in configuration.
fix wrong group domain name in lsarpc response.
set to SID_TYPE_UNKNOWN if there is no domain sid in server.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The iputils build system embeds git tags into the generated binaries
for use by commands like ping -V. Since openwrt packaging is done in
a different repository from the upstream repo, the tags it finds
aren't particularly meaningful, and we get confusing results like
those described at https://github.com/openwrt/packages/issues/13920
This change removes the git tag inspection in favor of the static
version string that's already known to the upstream build system.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Drop obsolete patches
- 001-no-tests.patch
- 002-fix-cross-compilation.patch
Move several user-executable binaries from /usr/sbin to /usr/bin per
upstream.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Current implementation of socat's init service doesn't allow to run more
complex configurations. As an example there's no possibility to execute
following command:
socat TCP-LISTEN:8080,fork,reuseaddr,bind=192.168.1.1 \
EXEC:"/sbin/ip netns exec somenetns socat STDIO TCP:10.0.0.1:80"
In such command the first line is argv[1] and the second line is
argv[2]. SocatOptions config option is a string. As as a consequence of
this each word will be passed as a separate argv element. Socat won't be
able to parse arguments correctly.
In order to mitigate this issue, we can also accept SocatOptions as a
list of strings. Following config file will work correctly:
config socat 'tunnel_8080_into_somenetns'
option enable '1'
list SocatOptions 'TCP-LISTEN:8080,fork,reuseaddr,bind=192.168.1.1'
list SocatOptions 'EXEC:"/sbin/ip netns exec somenetns socat STDIO TCP:10.0.0.1:80"'
While we're at it, pass stdout and stderr into logread.
Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
* The default local-adress makes Netopeer2-server listen on ipv4 only.
We change it to :: in order to listen on ipv6 as well as ipv4.
Signed-off-by: Jakov Smolic <jakov.smolic@sartura.hr>
* fix for possible exploit #13758
* sanetize all external template/config inputs
* fix some shellcheck warnings
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
I checked the hostname for existing DNS A and AAAA entries and these
ones didn't have an entry.
Signed-off-by: Gerald Hansen <gerald.hansen@cloud.ionos.com>
As the default uclient-fetch doesn't support authentication header
and the ddns provider myonlineportal.net support also username and
passwort as url parameter this can be changed.
Signed-off-by: Gerald Hansen <gerald.hansen@cloud.ionos.com>
add eoip package,this can create ethernet
tunnels compatible with Mikrotik EoIP tunnel.
At current moment it is easiest way
to create stateless tunnel with Mikrotik.
Signed-off-by: Bogdan Shatik <bogdikxxx@mail.ru>
In IPv4 the default route can be written as
0.0.0.0/0
In IPv6 the default route can be written as
::/0
If u try
owipcalc 0.0.0.0/0 contains 1.1.1.1
or
owipcalc ::/0 contains ::1
owipcalc will respond with 0 meaning that the "default prefixes" do not
contain the routes.
That is why we check now for 0 prefix.
Furthermore, if the prefix is 0, i will be 16. We will access a negative
array entry in the line:
uint8_t net1 = x->s6_addr[15-i] & m;
Divide by % 16 to prevent i becoming 16:
uint8_t i = ((128 - a->prefix) / 8) % 16;
Signed-off-by: Nick Hainke <vincent@systemli.org>
This is a helpful utility, but it does not have any dependencies
in base repository. Move it to packages feed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This is a helpful utility, but it does not have any dependencies
in base repository. Move it to packages feed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Some users have reported that reloading dnsmasq does not always work. It
sometimes stop responding to DNS lookup requests after being reloaded.
This patch changes "safe-search-maintenance" so that it restarts dnsmasq
instead of reloading it.
Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
Ensure that the best available IP is always used for all supported
safe-search providers. This is accomplished by periodically checking
DNS for the most recent list of IP addresses associated with each
provider.
Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
Start after named is running.
Add support for "cname", "domain", "mxhost", and "srvhost" configs.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* update to version 1.19.6
* remove default configuration files and documentation as
they are in the package `nginx-util`.
* do not install a `/etc/nginx/nginx.conf` file.
* use the dynamic `/etc/nginx/uci.conf` if the symlink (to
`/var/lib/nginx/uci.conf`) is not dead after calling
`nginx-util init_lan` (else try `/etc/nginx/nginx.conf`)
* replace nginx package by a dummy depending on `nginx-ssl`;
the dummies will be removed after a transition period.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
On Arch Linux, tcpreplay is picking up the host dnet-config and adding
OS paths, thereby breaking compilation. The easiest solution is to add
libdnet support as the previous commit fixes dnet-config on OpenWrt.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Something having to do with passing a file descriptor over spamd's
Unix socket causes the ClamAV milter to fail. The milter says "ERROR:
Unknown reply from clamd," and running strace on spamd reveals "No file
descriptor received. ERROR."
Some work by others can be found on the Internet that suggests using
a TCP socket for the communication between the milter and spamd fixes
this. Lucian Cristian confirmed this on OpenWrt.
I am not sure why the Unix socket does not work. I suspect it is something
related to musl, but I have not yet found evidence of this.
This merge request adds the option to configure spamd to use a TCP
socket, and it uses this as the default. The merge request also adds an
init script for clamav-milter.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
* update to 4.13.3
* enable vfs io_uring module by default, if kernel supports it
* fix for possible exploit openwrt/packages#13758
* sanetize all external template/config inputs
* fix some shellcheck warnings
* remove old aio modules/deps
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Version 8.2[0] added support for two new key types: "ecdsa-sk" and
"ed25519-sk". These two type enable the usage of hardware tokens that
implement the FIDO (or FIDO2) standard, as an authentication method for
SSH.
Since we're already on version 8.4 all we need to do is to explicitly enable
the support for hardware keys when compiling OpenSSH and add all the
missing dependencies OpenSSH requires.
OpenSSH depends on libfido2[1], to communicate with the FIDO devices
over USB. In turn, libfido2 depends on libcbor, a C implementation of
the CBOR protocol[2] and OpenSSL.
[0]: https://lwn.net/Articles/812537/
[1]: https://github.com/Yubico/libfido2
[2]: tools.ietf.org/html/rfc7049
Signed-off-by: Linos Giannopoulos <linosgian00@gmail.com>
Add fadvise64_64 and fchmod syscalls needed on PowerPC platforms to
seccomp rules of transmission-daemon.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
When specifying a secondary password script, the output should be appended to the temporary password file and shouldn't overwrite it. If you refer to the case where there is a static secondary password, you can see that the secondary password is appended. Without this fix, only the secondary password is passed to the `openconnect` session.
Signed-off-by: Frederick Morlock <FrederickGeek8@gmail.com>
There's some kind of crash internally in wolfSSL. It doesn't seem like
anyone knows how to fix it. Just disable it for now.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Remove uClibc-ng patch as it's not in the tree anymore.
Also remove the _GNU_SOURCE CFLAG for the same reason.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This package has been completely broken on several levels since
commit eadd5abe40 ("smartsnmpd: Update to 2015-02-22 version")
The update changed the configuration file syntax without fixing
the scripts generating this file. The OpenWrt package would
therefore fail to run.
Worse than that, the last upstream version is completely broken
is unable to generate proper snmp replies even if the
configuration file is fixed, This has been tested and verified
on both OpenWrt/realtek and Debian/amd64.
I considered fixing the package, but dropped it for the following
reasons
1) upstream has abandoned the project
2) the upstream fork "smithsnmp" continues to make aribitrary
changes to configuration files and other packaging challenges
3) the package is tied to the lua5.1 C API, and further upgrades
will be non-trivial
4) there are several other snmp daemons available in OpenWrt,
without any of these issues
5) no one is interested in this package
The last point is proven by the lack of testing and feedback.
The last update was not even tested by the person preparing and
commiting the update.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
It tries to link to host libraries for some reason. Add autoreconf to
fix. Also remove redundant prefixes.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The idea behind this is to prevent confusion between "virtual" package
wget and real one. Wget is provided by not just wget packages but also
by uclient-fetch so technically it is better to threat wget as virtual
package.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* update device description framework to v1.3
* setup methods in database
* setup uhttpd to use hs20 cert
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
pass CC to configure. host CC flags can leak in the build system,
preventing compilation.
Deleted upstream backports.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
It turns out that the Makefile of mdnsreponder links to absolute paths
instead of relative ones. This is an issue when compiling.
Fix for InstallDev as well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
For some reason, the build ones do not get generated when compiling in
parallel. PKG_INSTALL_DIR is the correct solution anyway.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Start named before dhcpd so that dhcpd can prime the local zones at startup.
Restore the empty domain zone for rfc1918 addresses that previously existed.
Create an additional subsidiary named.conf.local file (initially empty)
in /tmp/bind/ that can be seeded with dynamic zones and primed with
"rndc reload", and add it to the watched list of config files for procd.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Adds failsafe support to the openssh package.
Roughly based on an earlier patch.
Ref: https://github.com/openwrt/openwrt/pull/865
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
Removed patch as upstream fixed libtirpc support differently.
Switched to normal tarballs for simplicity.
Fixed license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Full changelog: https://mosquitto.org/blog/2020/12/version-2-0-2-released/
* Enables DHE ciphers
* Improved response time with http_dir and websockets
Drops a patch no longer required due to upstream fixes.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Along with the accompanying change to gpgme to install gpgme-config,
since libfko is what is actually linked to gpgme, and not
fwknop/fwknopd, an explicit dependency must be added to that package.
menuconfig now allows enabling gpg support if only fwknop is selected
without also selecting fwknopd.
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Enable the control port on named that rncd uses to talk to it. Use
rndc to allow for lightweight reloads of some (per-zone) or all of
the database without an interruption of service.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Commit ef388ff1f3 removed 'CMAKE_INSTALL:=1', and this makes the
development files to be not installed anymore on 'staging_dir'.
Being such, packages that needs to link against libminiupnpc fails
to build, because it cannot find the headers and the library.
Adding an InstallDev fixes this.
Build-tested on: ipq806x (R7800)
Run-tested on: ipq806x (R7800)
Signed-off-by: Daniel Bermond <danielbermond@gmail.com>
Some VPN providers require username and password for client to connect.
This commit adds an option to specify username, password and
cert_password directly in uci config which then gets expanded during
start of openpvn client.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>
New easyrsa will look for missing vars and x509-types where easyrsa
is located (following symlink). /usr/bin/easyrsa is now a link
to /usr/lib/easyrsa/easyrsa and /usr/lib/easyrsa/{vars,x509-types} a
link to /etc/easyrsa/{vars,x509-types}. This keeps the same previous
OpenWrt easyrsa behavior which tries to use $PWD/pki and
/etc/easyrsa/{vars,x509-types}, but without patching it.
Easyrsa can also use env vars to set pki root path (instead of
/usr/lib/easyrsa), pki path (instead of $PWD/pki) and vars path.
Those variables are commented in /etc/profile.d/50-openvpn-easy-rsa.sh
as an example of how to make easyrsa run independent of $PWD. That
scriptlet also sets $EASYRSA_TEMP_DIR from $EASYRSA_PKI/tmp to /tmp
in order to avoid writing to persistent media (normally flash). However,
as a profile scriptlet, it will only be used after session is restarted.
The "build" tgz was replaced by the "source" tar. "build" version has a
different file structure, making any patch backports too complex.
I'm also putting myself as maintainer.
Closesopenwrt/openwrt#2926, since it moved to openwrt/packages.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Fix the prefix instead.
Replace custom Compile section with PKG_INSTALL.
Minor cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Remove several configure options. apr-(utils) has been fixed, which
makes them useless. Also removed PKG_BUILD_DEPENDS for that reason.
Simplify NLS with autoreconf_bool.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved
Signed-off-by: Simon Day <email@simonday.info>
Added a patch to remove BUILDCXXFLAGS. For some reason, TARGET_CXXFLAGS
are leaking.
Removed custom Build/Compile section. There's already PKG_INSTALL.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Updating the system image or the package should not obliterate
the downloaded/unpacked geolocation database. If you use xt_geoip
in /etc/firewall.user you don't want the database disappearing
when sysupgrade runs and then reboots your system as you'll be
left exposed.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
specified for montioring
eg allows ipv4 and ipv6 forwarded traffic to be monitored from
both main network and dmz in single graph
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved
Signed-off-by: Simon Day <email@simonday.info>
specified for montioring
eg allows ipv4 and ipv6 forwarded traffic to be monitored from
both main network and dmz in single graph
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved
Signed-off-by: Simon Day <email@simonday.info>
Major change for version 3.3.1 are:
* Fix a segfault issue in ksmbd.mountd.
* Reorganize ndr write functions.
Major changes for version 3.3.0 are:
* Add samr and lsarpc RPC support.
* Generate subauth values for domain.
* Add Kerberos support.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Unlike ipv4, this option is supposed to be an IP address, otherwise, an
error occurs on startup:
can't parse "br-lan" as valid IPv6 listening address
Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
OpenVPN recommends disabling compression, as it may weaken the security
of the connection. For users who need compression, we build with LZ4
support by default. LZO in OpenVPN pulls in liblzo at approx. 32 kB.
OpenWrt users will no longer be able to connect to OpenVPN peers that
require LZO compression, unless they build the OpenVPN package themselves.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
New features:
* Per client tls-crypt keys
* ChaCha20-Poly1305 can be used to encrypt the data channel
* Routes are added/removed via Netlink instead of ifconfig/route
(unless iproute2 support is enabled).
* VLAN support when using a TAP device
Significant changes:
* Server support can no longer be disabled.
* Crypto support can no longer be disabled, remove nossl variant.
* Blowfish (BF-CBC) is no longer implicitly the default cipher.
OpenVPN peers prior to 2.4, or peers with data cipher negotiation
disabled, will not be able to connect to a 2.5 peer unless
option data_fallback_ciphers is set on the 2.5 peer and it contains a
cipher supported by the client.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
reload_server() gracefully with SIGUSR1 to lighttpd
relog() to reopen log files with SIGHUP to lighttpd
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
* update upstream version to lighttpd-1.4.56
* depend on Nettle for MD5, SHA1, SHA256
* multiple TLS options: gnutls, mbedtls, nss, openssl, wolfssl
* new module mod_authn_dbi
* mod_authn_* depend on mod_auth
* mod_authn_file is included if mod_auth is selected in build
* mod_vhostdb_* depend on mod_vhostdb
* mod_deflate subsumes mod_compress
* remove from Makefile the include of nls.mk (no longer needed)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
**tl;dr:** The functions `{add,del}_ssl` modify a server
section of the UCI config if there is no `.conf` file with
the same name in `/etc/nginx/conf.d/`.
Then `init_lan` creates `/var/lib/nginx/uci.conf` files by
copying the `/etc/nginx/uci.conf.template` and standard
options from the UCI config; additionally the special path
`logd` can be used in `{access,error}_log`.
The init does not change the configuration beside
re-creating self-signed certificates when needed. This is
also the only purpose of the new `check_ssl`, which is
installed as yearly cron job.
**Initialization:**
Invoking `nginx-util init_lan` parses the UCI configuration
for package `nginx`. It creates a server part in
`/var/lib/nginx/uci.conf` for each `section server '$name'`
by copying all UCI options but the following:
* `option uci_manage_ssl` is skipped. It is set to
'self-signed' by `nginx-util add_ssl $name`, removed by
`nginx-util del_ssl $name` and used by
`nginx-util check_ssl` (see below).
* `logd` as path in `error_log` or `access_log` writes them
to STDERR respective STDOUT, which are fowarded by Nginx's
init to the log daemon. Specifically:
`option error_log 'logd'` becomes `error_log stderr;` and
`option access_log 'logd openwrt'` becomes
`access_log /proc/self/fd/1 openwrt;`
Other `[option|list] key 'value'` entries just become
`key value;` directives.
The init.d calls internally also `check_ssl` for rebuilding
self-signed SSL certificates if needed (see below). And it
still sets up `/var/lib/nginx/lan{,_ssl}.listen` files as
it is doing in the current version (so they stay available).
**Defaults:**
The package installs the file `/etc/nginx/restrict_locally`
containing allow/deny directives for restricting the access
to LAN addresses by including it into a server part. The
default server '_lan' includes this file and listens on all
IPs (instead of only the local IPs as it did before; other
servers do not need to listen explicitly on the local IPs
anymore). The default server is contained together with a
server that redirects HTTP requests for inexistent URLs to
HTTPS in the UCI configuration file `/etc/config/nginx`.
Furthermore, the packages installs a
`/etc/nginx/uci.conf.template` containing the current setup
and a marker, which will be replaced by the created UCI
servers when calling `init_lan`.
**Other:**
If there is a file named `/etc/nginx/conf.d/$name.conf` the
functions `init_lan`, `add_ssl $name` and `del_ssl $name`
will use that file instead of a UCI server section (this is
similar to the current version).
Else it selects the UCI `section server $name`, or, when
there is no such section, it searches for the first one
having `option server_name '… $name …'`. For this section:
* `nginx-util add_ssl $name` will add to it:
`option uci_manage_ssl 'self-signed'`
`option ssl_certificate '/etc/nginx/conf.d/$name.crt'`
`option ssl_certificate_key '/etc/nginx/conf.d/$name.key'`
`option ssl_session_cache 'shared:SSL:32k'`
`option ssl_session_timeout '64m'`
If these options are already present, they will stay the
same; just the first option `uci_manage_ssl` will always be
changed to 'self-signed'. The command also changes all
`listen` list items to use port 443 and ssl instead of port
80 (without ssl). If they stated another port than 80
before, they are kept the same. Furthermore, it creates a
self-signed SSL certificate if necessary, i.e., if there is
no *valid* certificate and key at the locations given by
the options `ssl_certificate` and `ssl_certificate_key`.
* `nginx-util del_ssl $name` checks if `uci_manage_ssl` is
set 'self-signed' in the corresponding UCI section. Only
then it removes all of the above options regardless of the
value looking just at the key name. Then, it also changes
all `listen` list items to use port 80 (without ssl)
instead of port 443 with ssl. If stating another port than
443, they are kept the same. Furthermore, it removes the
SSL certificate and key that were indicated by
`ssl_certificate{,_key}`.
* `nginx-util check_ssl` looks through all server sections
of the UCI config for `uci_manage_ssl 'self-signed'`. On
every hit it checks if the SSL certificate-key-pair
indicated by the options `ssl_certificate{,_key}` is
expired. Then it re-creates a self-signed certificate.
If there exists at least one `section server` with
`uci_manage_ssl 'self-signed'`, it will try to install
itself as cron job. If there are no such sections, it
removes that cron job if possible.
For installing a ssl certificate and key managed by
another app, you can call:
`nginx-util add_ssl $name $manager $crtpath $keypath`
Hereby `$name` is as above, `$manager` is an arbitrary
string, and the the ssl certificate and its key are
indicated by their absolute path. If you want to remove
the directives again, then you can use:
`nginx-util del_ssl $name $manager`
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
It's useful to be able to dump sections of the database by country
for scripting or just plain sanity checking.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Snort 3.0.3-1 requires libdaq 3.0.0-beta1, but this version is no longer
compatible with Snort 2. Thus OpenWrt now provides both a libdaq and
libdaq3 package. This modifies the snort3 package to require the latter.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
procd-seccomp switched to OCI-compliant seccomp parser instead of our
(legacy, OpenWrt-specific) format. Convert ruleset to new format.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
iputils upstream changed build params with version s20200821
Latest OpenWRT iputils ping now appears to report the openwrt
version tag, rather than iputils date tag
This commit sends a test ping to localhost to evaluate the
capabilities of iputils ping.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Allow `mwan3 interfaces` to get uptime via an internal function and
thus remove the dependency on rpcd for `mwan3 interface` calls.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Upstream commit 90884c62 ("xl2tpd-control refactoring") introduced in
1.3.16 changed command names
The l2tp protocol handler part was from @danvd in pull request
openwrt/packages#13866
Fixes f07319d6 ("xl2tpd: bump to version 1.3.16")
Ref: https://github.com/openwrt/packages/pull/13866
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Maintainer: @codemarauder
Compile tested: Yes
Run tested: x86_64 PCEngines APU
Description:
A Tunnel which Improves your Network Quality on a High-latency Lossy Link by using Forward Error Correction,for All Traffics(TCP/UDP/ICMP)
It does it by sending redundant packets and re-arranging them to account for packet loss over the link. It uses Reed–Solomon code.
Signed-off-by: Nishant Sharma <codemarauder@gmail.com>
Signed-off-by: Andrew Mackintosh <amackint@waikato.ac.nz>
Maintainer: me / @null-cipher
Compile tested: Raspberry Pi 3 / brcm2708-bcm2710, OpenWrt 19.07.4
Hyper-V VM / x86_64, OpenWrt 19.07.4
Run tested: Raspberry Pi 3 / brcm2708-bcm2710, OpenWrt 19.07.4
Hyper-V VM / x86_64, OpenWrt 19.07.4
Description:
The NetStinky IDS is a component of the NetStinky suite of tools. It
monitors the traffic on the LAN interfaces of your router for
Indications of Compromise (IoCs), drawn from an auto-updating list of
definitions. IoCs are subsequently reported to the NetStinky smartphone
applications.
In recent commits, there were removed Transmission SSL variants and
there is just used one variant of transmission-daemon. Let's adjust it here as well.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
It was somewhat opaque how the variable a is questioned. To show this
better the variable is now a string and not a boolean. So you can see
directly what should happen. With a boolean you always have to think
about what it means when 0 or 1 is used.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Replace locks on /var/run/mwan3.lock with locks via procd.
This fixes a deadlock issue where mwan3 stop would have a procd
lock, but a hotplug script would have the /var/run/mwan3.lock
Locking can be removed from mwan3rtmon since:
1) procd will have sent the KILL signal to the process during
shutdown, so it will not add routes to already removed interfaces on
mwan3 shutdown and
2) mwan3rtmon checks if an interface is active based on the
mwan3_iface_in_<IFACE> entry in iptables, and the hotplug script
always adds this before creating the route table and removes it
before deleting the route table
Fixes github issue #13704
(https://github.com/openwrt/packages/issues/13704)
when the network procd service restarts, it flushes the ip rules. We
need to add these rules back. Since hotplug events are triggered when
the networks come back online, adding this call to the hotplug script
is the most convenient place to refresh the rules.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
he line is too long. For the future it is better to split it into
several lines and make it more clearly arranged. In case of a future
change, not the whole line will be marked as a change.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Will only run when no events are pending.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
[ Update description and split into own commit ]
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Initialize TRACK_OUTPUT has been set after INTERFACE variable initialization.
Move definition into main fixes this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
In a recent commit, there was a fixed typo in config file of rp-ppoe
package. As there was no increased version in PKG_VERSION/PKG_RELEASE,
it means that fixed typo will be applied for users, who install
rp-pppoe now. Existing users will not be aware that there is an updated
package with fixed typo. They will need to do force overwrite/reinstall via opkg.
It makes a little bit complicated as we are fixing typo in conffile, but
this change will be applied to users who do not touch it. In any case,
there should be a bumped version.
Fixes: fe709078ff ("rp-pppoe: fix typo")
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
DNS flag day 2020, software should reflect the minimum EDNS 1232 bytes.
Added iface_wan and iface_lan to control internal DNS assignemnts and
to control what is local service ACL. Interface wild cards are not
explicitly set so that they can be customized in extended conf.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
* removed test.sh script from package
Signed-off-by: Dirk Brenken <dev@brenken.org>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
* removed logd dependency, see #13820 for reference
Signed-off-by: Dirk Brenken <dev@brenken.org>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
Signed-off-by: Dirk Brenken <dev@brenken.org>
libudev-zero as well as libudev-fbsd have PROVIDES:=libudev . These
packages have nothing specific that requires one or the other.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If procd relaunches the ModemManager daemon after e.g. a crash, we
also want it to notify all cached hotplug events, or otherwise we
would end up leaving the daemon running without the full initial
processing done.
This change modifies the init script to include all the required init
commands as part of the procd instance command, so that procd launches
all of them on every respawn.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Boost headers try to include experimental/string_view when std is less
than c++17. This does not work ith libcxx where this header is not
present.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- DNS Flag Day 2020
(default EDNS buffer size changed from 4096 to 1232 bytes)
-- Added patch, which should be part of the next release
It fixes an issue while cross-compilation (I linked it in the commit
message with issue link)
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
When the ModemManager daemon is started by the init script, we're
explicitly calling mm_report_events_from_cache() so that all the
hotplug events that happened before that moment are properly notified
to the newly launched daemon.
This initial reporting of events does a wait for the ModemManager
process to be available in DBus, and if the daemon isn't registered in
the bus in a given time, the process is considered failed:
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:03 2020 [2180]: <info> ModemManager (version 1.14.6) starting in system bus...
Sun Sep 6 16:20:03 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:04 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: error: couldn't report initial kernel events: ModemManager not running
Update the default wait time for this initial event notification from
10s to 60s, because there are cases where the daemon is slower to
boot, e.g. during the first boot after a sysupgrade.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Extend configuration of NTP sources in UCI:
- Add nts option to enable NTS
- Add disabled option to allow inactive sources
Add nts section to UCI with:
- rtccheck option to disable certificate time checks on systems that
don't have an RTC to avoid the chicken-and-egg problem (it is less
secure, but still should be better than no NTS at all)
- systemcerts option to disable system certificates
- trustedcerts option to specify path to trusted certificates
Save NTS keys and cookies by default to avoid unnecessary NTS-KE
sessions when restarted or switching back to an already used NTS source.
Also, save the drift to stabilize the clock after chronyd restart.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
- Use the chronyc onoffline command to update state of all sources
per current routing configuration
- Don't ignore the "ifupdate" action
- Add NTP servers from DHCP for the interface that went up instead of
the wan4+wan6 interfaces
- Save the servers to files loaded by the sourcedir directive to not
lose them when chronyd is restarted, and remove them when the
interface goes down
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
Instead of loading /etc/chrony/chrony.conf from the file generated from
the chrony UCI configuration, use the confdir directive in the main
config to load the generated file. This should make it obvious that
chrony is configured in UCI and it can also be easily disabled.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
If relay/bridge support isn't required, this variant is about 300 kiB smaller
than the full tor daemon.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Extracted from:
http://deb.debian.org/debian/pool/main/i/ifstat/ifstat_1.1-8.1.diff.gz
Note that I also created a new git repository with these fixes:
https://github.com/matttbe/ifstat/
The original author of these modification is:
Goswin von Brederlow <goswin-v-b@web.de>
ChangeLog:
* snmp.c: fix 2 pointer targets differ in signedness warnings
* Adding upport for 64bit /proc/net/dev counters.
* Clean up compiler warnings.
More modifications are available in the patch from the Debian project
but mostly related to the "debian" dir, man page and debug mode. Here I
only took the modifications related to the .c and .h files.
The most important fix is related to the support for 64bit counters in
/proc/net/dev instead of displaying 0 after a while.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
- support trailing route space from iproute2
- add routes even when iface is down
- fix source_routing argument check
- add quotes in logging to better detect issues with trailing spaces
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Contains following list of changes:
ab4c3471b261 tests: add cram based unit tests
7b4e3241e1bd tests: add cgi-io built with clang sanitizers
21831f45d16d Disable session ACLs during unit testing
2f525417b5df Add initial GitLab CI support
57f1c4f18cb6 Add .gitignore
09f9ac5066ee Fix off-by-one in postdecode_fields
ed8ce0d5d28b Add fuzzing of utility functions
a61581819800 Add fuzzing of multipart_parser
6b0615b728ed Refactor utility functions into static library
a0ed2c9a7a72 Fix clang compiler errors
232659da19a4 Fix possible NULL dereference
8e5719b37a67 Fix warnings reported by clang-10 static analyzer
b99aa8a64cca Remove Makefile
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Allows the Makefile to be cleaned up and to have fewer dependencies.
There's no need for multiple TLS libraries to be installed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
openconnect v8.10 supports 4 VPN protocols
--protocol=anyconnect Compatible with Cisco AnyConnect SSL VPN, as well as ocserv (default)
--protocol=nc Compatible with Juniper Network Connect
--protocol=gp Compatible with Palo Alto Networks (PAN) GlobalProtect SSL VPN
--protocol=pulse Compatible with Pulse Connect Secure SSL VPN
This patch allows user to specify protocol use the new "vpn_protocol"
option and deprecate the old option "juniper" which seems to be missing in
the current openconnect client.
Signed-off-by: Mengyang Li <mayli.he@gmail.com>
version 8.2.6 (October 19, 2020):
- try and address license concerns with LICENSE.md
- replace usleep with nanosleep (Rosen Penev <rosenp@gmail.com>)
- console: Add 'k' option to exit on console-down (Mylène Josserand <mylene.josserand@collabora.com>)
- Fix#48 - apply ipv4 CIDR access list when compiled with ipv6 support
Signed-off-by: Bjørn Mork <bjorn@mork.no>
The additional directory is created and can be used e.g. for configurations
which are created e.g. dynamically from an uci config.
Signed-off-by: Helge Mader <ma@dev.tdt.de>
For applications writing their own xinetd configuration to the /etc/xinetd.d
directory it would be necessary to save them (e.g. a user edits them manually)
Signed-off-by: Helge Mader <ma@dev.tdt.de>
When the interface section was changed, the changed configuration
options were not applied.
This commit adds the service reload handling again.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* switch all safesearch providers to dynamic ips (derived from cname)
* made the new safesearch approach compatible with bind-nslookup
* removed 3.x config compatibility code
Signed-off-by: Dirk Brenken <dev@brenken.org>
Django 3.1 supports relative paths for static_url.
Use it to make it more flexible.
Minor fixes for upgrade:
* ignore-fail-on-non-empty for rmdir /usr/share/etesync-server/etesync_server
* do not stop service (it is stopped already and init file is removed)
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
The underlying `acme.sh` allows custom ACME server URLs (using `--server`). Adding the necessary field to specify a custom ACME server URL from UCI.
Signed-off-by: Jannis Pinter <jannis+openwrt@pinterjann.is>
Use "mwan3 use" to wrap a command with interface bindings so that you can
avoid the mwan3 rules and test behavior on a specific interface.
eg "mwan3 use wan ping -c1 1.1.1.1"
Additional binding arguments to the command will have their system
calls intercepted and ignored.
eg "mwan3 use wan ping -c1 -I tun0 1.1.1.1" will use the
device associated with "wan", rather than "tun0".
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Rather than using a special mwan3 user to manage mwan3track's tracking
packets, this commit implements a small helper library to bind to
device and to set a fwmark so that the tracking packets can be routed
out of the correct interface.
This provides a consistent method for binding to a device rather than
relying on various packages potentially buggy implementations. For
example: #8139 and #12836
This helper issue also allows for more tracking methods to be added
even if they do not have a command line option to bind to device,
such as iperf3 (eg #13050).
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
start all mwan3mon and mwan3track instances on mwan3 start
if an interface is down when mwan3track starts, it waits
for a signal from the hotplug script to start
procd can then handle stopping all of the scripts when mwan3
is halted
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
correctly terminate interface status checks with new lines so that
interface status does not get confused when one interface is a prefix
of another interface.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
handle creation of routing tables in mwan3rtmon to avoid race
conditions and potentially missing routes
handle ipv6 routes that have expiry
update directly connected ipset when routes are added or deleted
add fall through rules so that the default routing table is not
used if no rule in the interface-specific routing table matches
add option to comply with mwan3 source based routing
get default route parameters from main routing table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Remove paxctl stuff. pax is not packaged in OpenWrt.
Add reload support.
Install lua cfg file as 644. It's needed to be readable as prosody user
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Change KEY/HMAC_KEY to __CHANGEME__, which is rejected by fwknopd
during start-up. The value CHANGEME is used only by LuCI package
luci-app-fwknopd - pull request for generating keys directly from
LuCI has been created already.
* Add sensible defaults for ENABLE_IPT_FORWARDING and ENABLE_NAT_DNS,
which both are/were set by luci-app-fwknopd. Move the defaults here.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
The substring "release_" does not reflect the version number.
In addition, package names will be shorter.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
mbedcrypto should be searched, not mbedtls. Also, there is no pkgconfig
file with mbedtls. Fixed that as well. Removed Makefile hacks.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
No functional changes, just moved the sources into out of tree
project[1] so it's going to be easier to do CI with unit testing,
fuzzing etc.
1. https://git.openwrt.org/?p=project/cgi-io.git;a=shortlog
Signed-off-by: Petr Štetiar <ynezz@true.cz>
AdGuardHome is a network-wide ads and trackers blocking DNS server.
After installing it with opkg, start it like every service:
/etc/init.d/adguardhome start
In order to complete the installation vist http://{YOUR_ROUTERS_IP}:3000.
Then you can setup dnsmasq to forward DNS traffic to AdGuardHome:
uci -q delete dhcp.@dnsmasq[0].server
uci add_list dhcp.@dnsmasq[0].server=127.0.0.1#{PORT_SET_DURING_INSTALL}
uci set dhcp.@dnsmasq[0].noresolv=1
uci commit dhcp
/etc/init.d/dnsmasq restart
Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
If lighttpd loads mod-auth, it also automatically tries to load
mod-authn_file, and fails if it's not available. That is a compatibility
feature of lighttpd after the funtionality was split into modules.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
* fix a vpn/iptables race condition
* remove needless dnsmasq dependency
* synchronize code-base of all auto-login scripts, due to
COVID-19 restrictions all of them are still untested/WIP
* various small cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
This meta-package contains only dependencies for modules needed in
FreeRADIUS default configuration.
This commit adds missing description and install sections.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
The provider could also be read from the custom directory. To get always
the latest version of the provider config json file, we read first the custom
directory and after that we also check the default directory, if we could not
find the provider file
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Since we can also install custom ddns services, the name for the default
services is not optimally chosen. To emphasize this the folder with the
standard services for the package feed will be renamed to default.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If we install ddns-scripts we also install the default
ddns-scripts-services package. So the behabviour for the user does not
change.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This package does not currently compile.
This is needed to do so that it compiles:
- fix emptying CXX variable in configure script
- fix automake not generating Makefile (remove doxygen definitions)
- force gnu++11 by patch, does not work with configure variable
Also because of changed API in libmicrohttpd:
- fix HttpServer
Moreover this package does not support --disable-slp configure option
anymore, remove it.
Signed-off-by: Marek Behún <kabel@blackhole.sk>
Note:
Fixes CVE-2020-1472 in case smb.conf
contains 'server schannel = no' or 'server schannel = auto'
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
Since we no longer need to edit the service and serive_ipv6 files during
installation, the preinst and postinst script can be removed. They are
not neede anymore.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
From my point of view there are several reasons why this uci default
script should be deleted.
- This script is no longer maintained and there was no significant
change since the old stable release openwrt-18.06.
- The script is installed with every additional package. Which is kind
of funny. It would be better to maintain a separate uci default upgrade
script for each package. So uci default tasks that are no longer needed
can simply be deleted without having to watch and test the whole scirpt.
- The script is also not so easy to maintain, because the code is not
easy to read.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Stan Grishin <stangri@melmac.net>
shellchecked
Signed-off-by: Stan Grishin <stangri@melmac.net>
shellchecked
Signed-off-by: Stan Grishin <stangri@melmac.net>
- new package dependency: curl (plus one of the wpad variants)
- optional package dependencies:
- 'msmtp' for email notification support
- 'wireguard' or 'openvpn' for vpn support
- removed WEP support, only WPA/WPA2/WPA3 are supported!
- new, more robust setup wizard (CLI and LuCI)
- more robust captive portal detection
- randomize mac addresses with every uplnk connect
- automatic vpn handling during uplink switch (only classic/simple
client-setups for wireguard or openvpn are supported)
- email notifications after successful uplink connections
- automatically disable uplinks after n minutes, e.g. for timed
connections
- automatically (re-)enable uplinks after n minutes, e.g. after failed
login attempts
- complete LuCI rewrite - migrated to client side JS (separate PR)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Don't build the sntp binary and libevent2-pthread dependency unless
ntp-utils is selected.
Re-add ntp-keygen dependency libevent2-core.
Fixes openwrt#10307
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
With openwrt/openwrt@51ec51871f one can
now use user/group names instead of numeric uid/gid in FILE_MODES.
Make use of that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Apart from adapting to upstream changes also switch to use FILE_MODES
instead of chown/chmod in init-script.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* update to 4.12.6
* fix optional modules not included on module build (vfs_btrfs, vfs_linux_xfs_sgid)
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Change URL to codeload. It redirects to it anyway. I was getting a 404
error with the original. I couldn't figure it out.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- remove patch that has been included upstream
- remove dependence on resolveip
- remove hotplug script that is handled by "proto_add_host_dependency"
- use openfortivpn default tunnel ip if none specified
- add status checking with uclient-fetch
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
If a daemon listens on multiple addresses at once, it'll show up multiple
times in get_listeners() which will clobber the config for uhttpd. Fix this
by skipping subsequent handlings of the same daemon binary.
Fixes#13325.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Update to 40.89.244.237 which is the new IP address that duckduckgo.com is using for safe-search.
Signed-off-by: Greg Dietsche <gregory.dietsche@cuw.edu>
The creation of the dummy package nginx creates some problem with dependency detection for the all-module variant. Reorganize the dependency and compile nginx before the the sub-variant.
Fixes#13275
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Canonical radtest start results in an error:
$ radtest bob hello localhost 0 testing123
/usr/bin/radtest: line 1: hostname: not found
(0) Error parsing "stdin": Failed to get value
hostname command is not present in OpenWrt.
Instead, hostname can be obtained from file /proc/sys/kernel/hostname.
added: 004-get-hostname-from-proc-in-radtest.patch
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
radtest utility is used in many manuals to check the operation of
radius server.
At the moment all parameters must be specified at startup, for example:
$ radtest bob hello localhost 0 testing123 0 localhost
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
Support for kernel 4.14 has been removed in main repo, so drop the
dependencies here as well (and those for even older 4.9).
Also drop a patch that is required only for 4.14 and lower.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Since support for kernel 4.14 has been removed, kmod-sched-cake-oot
is gone, and the kmod-sched-cake-virtual package is not needed
anymore.
This effectively reverts 9114244fbd ("sqm-scripts: Switch sch_cake
dependency to new virtual package")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This also removes PKG_BUILD_PARALLEL:=0 that was added for packages that
use HOST_PYTHON3_PACKAGE_BUILD_DEPENDS.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This commit allows for UCI configuration of the "left=" and the
"mark=" values in a StrongSwan IPSec connection. This improves
VTI support and allows certain stricter connection scenarios.
Signed-off-by: Michael C. Bazarewsky <github@bazstuff.com>
openconnect may emit following error logs every minute when negotiating
with deployments forbidding usage of dtls
Thu Aug 27 04:11:59 2020 daemon.notice openconnect[12024]: DTLS handshake failed: Error in the push function.
Thu Aug 27 04:11:59 2020 daemon.notice openconnect[12024]: (Is a firewall preventing you from sending UDP packets?)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Required by ovn-ctl for stopping ovn ovsdb instances
This utility was introduced since 20.03.0 after the project was
maintained in its own repo
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Package libcurl is missing dependencies for the following libraries:
libzstd.so.1
Previous patch by Hans Dedecker <dedeckeh@gmail.com> took the easy way
out :)
Suggested-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Tony Butler <spudz76@gmail.com>
[fixed title]
Signed-off-by: Paul Spooren <mail@aparcar.org>
Instead of using mbedtls by default use wolfssl. We now integrate
wolfssl in the default build so use it also as default ssl library for
curl.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport a commit from upstream curl to fix a problem in configure with
wolfssl.
checking size of time_t... configure: error: cannot determine a size for time_t
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move package over from openwrt.git based on the Hamburg 2019 decision
that non essential packages should be maintained in packages.git
Signed-off-by: Paul Spooren <mail@aparcar.org>
Several security issures are addressed:
- CVE-2020-8620 It was possible to trigger an assertion failure by sending
a specially crafted large TCP DNS message.
- CVE-2020-8621 named could crash after failing an assertion check in
certain query resolution scenarios where QNAME minimization and
forwarding were both enabled. To prevent such crashes, QNAME minimization is
now always disabled for a given query resolution process, if forwarders are
used at any point.
- CVE-2020-8622 It was possible to trigger an assertion failure when
verifying the response to a TSIG-signed request.
- CVE-2020-8623 When BIND 9 was compiled with native PKCS#11 support, it
was possible to trigger an assertion failure in code determining the
number of bits in the PKCS#11 RSA public key with a specially crafted
packet.
- CVE-2020-8624 update-policy rules of type subdomain were incorrectly
treated as zonesub rules, which allowed keys used in subdomain rules to
update names outside of the specified subdomains. The problem was fixed by
making sure subdomain rules are again processed as described in the ARM.
Full release notes are available at
https://ftp.isc.org/isc/bind9/9.16.6/doc/arm/html/notes.html#notes-for-bind-9-16-6
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Drops pid files, no longer needed with procd management.
Now properly reloads on reload_config after UCI changes.
Signed-off-by: Karl Palsson <karlp@etactica.com>
[ Fixed two shellcheck warnings and bump PKG_RELEASE ]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
The openfortivpn routes are a bit different than the standard ppp
routes so we need to handle them with a custom ppp-up script.
Gateway should not be set, and src should be set to the PPP local ip
address.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
fakepop is a fake pop3 daemon. It returns always the same messages to all users, it does not care about usernames and passwords. All user/pass combinations are accepted.
Signed-off-by: Marc Egerton <foxtrot@realloc.me>
Includes:
- dawn_uci: fix crashing when uci config is received
- tcpsocket: add option to add server ip
A new config option allows to add a server ip
option server_ip '10.0.0.2'
However, this server does not send anything back. Therefore it is not
possible to change the node configuration. This will probably be added
soon. The main goal of this commit is to allow monitoring of all nodes
in a network with DAWN, e.g. clients, channel utilization, ...
Also a network option (3) has been added which allows to use TCP but
not to announce your daemon in the broadcast domain. This allows you to
create a monitor-only node that holds only the local information and
forwards it to the central server.
A monitor-only node could be configured like
option server_ip '10.0.0.1'
option tcp_port '1026'
option network_option '3'
Another possible config is
option server_ip '10.0.0.1'
option tcp_port '1026'
option network_option '2'
Here, the node shares information with a central server, which can be
located outside the broadcast domain. Nevertheless, it also shares
information within its broadcast domain and can therefore perform
client steering.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Security release. From the changelog:
- In some circumstances, Mosquitto could leak memory when handling PUBLISH
messages. This is limited to incoming QoS 2 messages, and is related
to the combination of the broker having persistence enabled, a clean
session=false client, which was connected prior to the broker restarting,
then has reconnected and has now sent messages at a sufficiently high rate
that the incoming queue at the broker has filled up and hence messages are
being dropped. This is more likely to have an effect where
max_queued_messages is a small value. This has now been fixed. Closes
https://github.com/eclipse/mosquitto/issues/1793
Changelog: https://mosquitto.org/blog/2020/08/version-1-6-12-released/
Signed-off-by: Karl Palsson <karlp@etactica.com>
This patch makes it possible to configure and limit per-client internet
speed based on MAC address and it can work with SQM.
This feature is what OpenWRT currently lacks. This patch is largely based
on static.sh and the configuration file is similar to original nft-qos.
New configuration options and examples are listed below
config default 'default'
option limit_mac_enable '1'
config client
option drunit 'kbytes'
option urunit 'kbytes'
option hostname 'tv-box'
option macaddr 'AB:CD:EF:01:23:45'
option drate '1000'
option urate '50'
config client
option drunit 'kbytes'
option urunit 'kbytes'
option hostname 'my-pc'
option macaddr 'AB:CD:EF:01:23:46'
option drate '3000'
option urate '2000'
limit_mac_enable - enable rate limit based on MAC address
drunit - download rate unit
urunit - upload rate unit
macaddr - client MAC address
drate - download rate
urate - upload rate
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
improve startup and runtime performance by
1) moving common startup procedures out of hotplug script when called
from mwan3 start
2) reducing calls to iptables to check status of rules
3) consolidating iptables updates and updating with iptables-restore
4) do not wait for kill if nothing was killed
5) running interface hotplug scripts in parallel
6) eliminate operations in hotplug script that check status on every
single interface unnecessarily
7) consolidate how mwan3track makes hotplug calls
8) do not restart mwan3track on connected events
This is a significant refactor, but should not result in any breaking
changes or require users to update their configurations.
version bump to 2.9.0
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
In hash-checking mode[1], pip will verify downloaded package archives
(source tarballs in our case) against known SHA256 hashes before
installing the packages.
As a consequence, this requires the use of requirements files[2] and
pinning packages to known versions.
The syntax for package Makefiles has changed slightly;
HOST_PYTHON3_PACKAGE_BUILD_DEPENDS no longer accepts requirement
specifiers like "foo>=1.0", only requirements file names (which are the
same as package names in the most common case).
This also updates affected packages, in particular:
* python-zipp: "setuptools_scm[toml]" has been split into
"setuptools-scm toml" to reuse the requirements file for
setuptools-scm (the extra depends installed by "setuptools_scm[toml]"
is toml).
* python-pycparser: This previously used ply 3.10, whereas the
requirements file will now install 3.11.
[1]: https://pip.pypa.io/en/stable/reference/pip_install/#hash-checking-mode
[2]: https://pip.pypa.io/en/stable/user_guide/#requirements-files
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Setup user database if non-existent, configure uhttpd .php interpreter
and patch php scripts to work out-of-the-box.
Also ship Hotspot 2.0 SPP and OMA DM XML schema/DTD files needed at
run-time for both client and server.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
use only committed uci changes for updating routing table
use functions.sh functions rather than uci command line tool
to find interfaces for routing table.
consolidate rtmon_ipv4 and rtmon_ipv6 functions into a single function
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Add hs20-server and hs20-client packages correspoding to the
hs20/client and hs20/server folder in hostap.git.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* remove 'dshield' and 'sysctl' (discontinued)
* switch 'malwaredomains', 'shallalist' and 'winhelp' to https
* add a second regional list for poland (provided by matx1002)
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
Signed-off-by: Dirk Brenken <dev@brenken.org>
Added signal refresh rate option
modemmanager: update readme.md
Added description for added proto options.
Added compile option to compile --with-at-command-via-dbus for allowing
AT commands to modem without --debug flag
Changes to be committed:
modified: net/modemmanager/Config.in
modified: net/modemmanager/Makefile
modified: net/modemmanager/files/modemmanager.init
modified: net/modemmanager/files/modemmanager.proto
modified: README.md
Signed-off-by: Valtteri Holopainen <valtsu@gmail.com>
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.
Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.
Signed-off-by: Paul Spooren <mail@aparcar.org>
GCC10 defaults to -fno-common, which breaks compilation when there are
multiple definitions of implicit "extern" variables. Remove the extra
definitions.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
From CHANGES_2.4:
SECURITY: CVE-2020-11984 (cve.mitre.org)
mod_proxy_uwsgi: Malicious request may result in information disclosure
or RCE of existing file on the server running under a malicious process
environment. [Yann Ylavic]
SECURITY: CVE-2020-11993 (cve.mitre.org)
mod_http2: when throttling connection requests, log statements
where possibly made that result in concurrent, unsafe use of
a memory pool. [Stefan Eissing]
SECURITY:
mod_http2: a specially crafted value for the 'Cache-Digest' header
request would result in a crash when the server actually tries
to HTTP/2 PUSH a resource afterwards.
[Stefan Eissing, Eric Covener, Christophe Jaillet]
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
test_storage: fix compilation with musl 1.2.0
datastorage/test: improve scalability and performance
datastorage: fixed use of wrong client search
general: add memory auditing
memory auditing: bug fixes to memory auditing and hearing map
datastorage: fixes to linked list handling
tcpsocket: fix read callback function and arbitrary memory allocations
tcpsocket: leave loop if we read 0 byte
Furthermore, you can now dump the memory usage by sending a SIGHUP to
dawn process.
Signed-off-by: Nick Hainke <vincent@systemli.org>
This fixes misleading errors in the status file, and increases buffer
sizes to match the python implementation.
Signed-off-by: Karl Palsson <karlp@etactica.com>
At the moment ss-server seems to be the only component using these two
options. It also accepts "local_address" of either ip4 or ip6 address,
but the meaning is different from that of ss-local, ss-tunnel etc.
where it is for listen bind
With this commit, we start deprecation process of uci option
"bind_address". The name was replaced with "local_addr" in upstream
project commit 5fa98a66 ("Fix #1911") and available as json config
option "local_address". This upstream change was released in 3.2.0
Link: 4a42da641b
Link: https://github.com/openwrt/packages/issues/12931
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Config files
/etc/freeradius3/policy.d/accounting
/etc/freeradius3/policy.d/filter
/etc/freeradius3/proxy.conf
/etc/freeradius3/sites-available/default
and link
/etc/freeradius3/sites-enabled/default
are in the freeradius3 package and are mentioned in the main config file
/etc/freeradius3/radiusd.conf
Thus, they must be explicitly specified in the Makefile.
File
/etc/freeradius3/sites/default
is not included in the package, is not created during installation,
is not mentioned in the main config file and should therefore be excluded
from the Makefile.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
netifd is clever enough to handle the peerdns and default route
arguments, so we can just let them get passed along, and when
ppp-up invokes proto_send_update, netifd will only apply what
is needed
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Do not manually overwrite the paths of gdbus-codegen or glib-mkenums
in the ModemManager package build, as modifying the configure.ac ends
up requiring a full autoreconf.
Since MM 1.14, git builds or autoreconf-ed source package builds
require autoconf-archive installed in the build system, and so the
build would fail if this happens.
The update to overwrite the paths was to force using the gdbus-codegen
and glib-mkenums provided by the "host" glib2 package instead of the
"target" glib2 package (see fa8ad6e69c),
but these tools are really the same in both as they're python
programs, arch independent.
Tested in a local build where the setup detects and uses the correct
glib tool paths from the target:
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/gdbus-codegen
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/glib-mkenums
Fixes https://github.com/openwrt/packages/issues/12958
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
This is to make explicit the conditional select of libunwind is only
needed for libopenvswitch. If we spill it over other packages, the
generated kconfig will have recursive dependency issue. 2 new patches
were made for this goal
The other thing is that "+libunwind" will cause it to be built if any of the
packages defined in this Makefile is enabled (y or m). This is at the moment
by-design of the build system.
Libunwind does not support architectures like arc. Use conditional select To
avoid (libunwind) build failures like the following,
checking for ELF helper width... configure: error: Unknown ELF target: arc
make[3]: *** [Makefile:65: /data/openwrt/build_dir/target-arc_arc700_uClibc/
libunwind-1.3.1/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 1
Things like "+PACKAGE_openvswitch-libopenvswitch:libunwind" will also result in
recursive deps error for chains of 3 nodes. Kconfig construct like the
following will be made
config A
tristate
select B
depends on !(C) || (x)
config B
tristate
select C
config C
tristate
config x
bool
Other changes include
- Shared use of variable ovs__common_depends was removed
- Ovn doc build was patched out
Link: https://github.com/openwrt/packages/pull/12959#issuecomment-665021413
Reported-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Simplified Makefile as a result of meson transition.
Fixed license information.
Updated URL.
Added patch to fix linking issue.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If two openfortivpn scripts are started at the same time, a race
condition can occur where the conditional evaluates to true, but the
symlink exists by the time the other script tries to create it
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Block restart of the interface if the openfortivpn fails to authenticate.
Without this check, with a bad password, netifd will continually
hit the VPN endpoint with connection attempts
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Add a hotplug script to reload nlbwmon's config after interface
ifup actions.
That should improve the detection of the IPv6 LAN address
that can get enabled a bit later in the boot process.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit cde2a77ed3.
Applying this change has shown that it is even quicker to provoke the
race condtition on simultan mwan3 commands execution.
By reversing the change we have the same behaviour as before.
But the race condition on mwan3 execute at the same time still exists.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This adjustment of the locks fixes the race condition when a mwan3
hotplug script and a mwan3 command are running at the same time.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This new config section in package openvswitch
supports creating a named bridge, and setting
its' OpenFlow controller end-point.
An example config is included in /rom/etc/config/openvswitch
Signed-off-by: Simon Kinane <skinane@fb.com>
- New major version (LTS release)
- Update haproxy download URL and hash
- Remove obsolete dladdr1-dependency-patch as it has been upstreamed
- USE_REGPARM is obsolete and therefore removed from our Makefile
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Make the plain nginx version the same as nginx-ssl.
In a further change we will replace nginx by a dummy package,
depending on +nginx-ssl instead. This allows a smooth upgrade.
For nginx-util leave the ssl and the ssl-nopcre versions only.
For nginx-mod-luci remove the duplicate ssl version.
Replace the removed packages by dummies for a smooth upgrade.
The dummy packages will be removed after a transition period.
Additionally, enable the http2 module for nginx-ssl by default
and cleanup the nginx.init file.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
- Fixes CVEs:
CVE-2019-12519
CVE-2019-12520
CVE-2019-12521
CVE-2019-12523
CVE-2019-12524
CVE-2019-12525
CVE-2019-12526
CVE-2019-12527
CVE-2019-12528
CVE-2019-12529
CVE-2019-12824
CVE-2019-12854
CVE-2019-13345
CVE-2019-18676
CVE-2019-18677
CVE-2019-18678
CVE-2019-18679
CVE-2020-8449
CVE-2020-8450
CVE-2020-11945
CVE-2020-14058
CVE-2020-15049
- Remove patch for cross-compilation
The patch should not be included in the OpenWrt at all without any
commit message/description.
Is not needed and there should be used HOST variables instead of BUILD variables (e.g.
HOSTCXX)
However, the BUILDCXX is set in Makefile to HOSTCXX
- Renumber glibc patch and refresh it
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
If the uci option family is not set in the interface section, then there
is no default value set as in the `config_load / config_get` API.
The problem here is that if the family is not set, the default value ipv4
is normaly assumed. But the comparison fails here because the value is empty
and therefore the dedicated routing table for this interface is not compared
with the other routes from the main table and so not updated.
To fix this set the default value for this config option which is`false`
for enabled and `ipv4` for family.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This fixes routing handling. Introduced with the last version update.
The following message disappears on the shell
when mwan3 is called with 'mwna3 restart`.
`Error: Invalid gateway address.`
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
[aaronjg@stanford.edu: fully unset variable and handle ipv4 as well]
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
default rule only applied to ipv4 with dest_ip 0.0.0.0/0
and error was hidden when trying to apply it in ip6table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
allow use of curl rather than ping to test if a host
is up since a host may not respond to ping, but an
https request is part of the openfortivpn connection,
so this is a more reliable test
also clean up overly verbose logging
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Split musl patch into multiple small ones. Much easier to reason about.
Removed stack protector patch. This is not an issue anymore.
Removed NLS support. There seems to be a linking issue as
libiconv-stub does not have a shared library component.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Changed URL to new upstream.
Use PKG_INSTALL for consistency between packages.
Use PKG_BUILD_PARALLEL for faster compilation.
Remove outdated patch.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- prevent rapid overlap in DHCP script updates
- check and allow localhost forwards with specific applications
- add option for rate limiting inbound queries
- change UCI list to table format with Unbound conf references
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Includes:
- dawn_uci: no need uci_alloc_context on each uci_set_network call
- test_storage: extend test harness; datastorage: two bug fixes
- tcpsocket: free con after ustream write error and make list each safe
list_each is not safe against removal of list entry
Signed-off-by: Nick Hainke <vincent@systemli.org>
Simplifies the Makefile and allows faster compilation with Ninja.
Added patch to fix libmariadb dependency.
Added extra modules.
Speed Before:
time make package/lighttpd/compile -j 12
Executed in 47.91 secs fish external
usr time 41.83 secs 384.00 micros 41.83 secs
sys time 10.79 secs 37.00 micros 10.79 secs
Speed After:
time make package/lighttpd/compile -j 12
Executed in 19.67 secs fish external
usr time 42.79 secs 377.00 micros 42.79 secs
sys time 8.56 secs 37.00 micros 8.56 secs
Tested with fish shell.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Since we use now procd for xinetd, we have to start the service with the
option `-dontfork` to make procd happy.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
It seems even modern stuff doesn't support v2 correctly. The miniupnp
suite does but other stacks seem to lack support. Default to v1 to
avoid the headache.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added PKG_LICENSE_FILES.
Added PKG_BUILD_PARALLEL for faster compilation.
Simplified configure arguments.
Small cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Due to a missing config load function call, mwan3 start runs ifup for an empty
list of interfaces, thus not calling ifup at all.
This commit introduces the missing config_load call.
Signed-off-by: Michiel Blokzijl <code@m01.eu>
The init file of darkstat is creating the pid in /var/empty and
setting the owner of the directory to darkstat which is incompatible
with sshd as sshd requires /var/empty to be owned by root and not
group or world-writable. See issue #12420.
This corrects the problem by creating another directory: /var/darkstat
instead without setting the owner, which is not actually required.
Compile tested: not applicable as the changes do not involve
compilation.
Tested on my home router running darkstat.
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
Tidy up some minor patch fuzz with a refresh.
Also tweak the linux makefile to make it run on macosx and linux:
install only understand -m for filemode, not that the openwrt staging
dir understands file modes. Also glibc>2.17 so patch out the check that
otherwise barfs a number of errors from a missing 'ldd' command under
macos.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
When listening to a udp port an Illegal instruction occurs.
This did NOT happen when compiled with debug on.
Fixes issue openwrt#4747, FS#2937
Signed-off-by: Rick Frankland <rfrankla@yahoo.com>
This adds PKG_BUILD_PARALLEL:=0 to packages that depend on host Python
packages (HOST_PYTHON3_PACKAGE_BUILD_DEPENDS), because installing
packages with multiple concurrent pip processes can lead to errors or
unexpected results[1].
This also:
* Move HOST_PYTHON3_PACKAGE_BUILD_DEPENDS definitions to before
python3-package.mk is included
* Update Python folder readme to include PKG_BUILD_PARALLEL:=0
[1]: https://github.com/pypa/pip/issues/2361
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Jool v4.1.0 suffers from bad offload management as well as broken
stateful NAT64 translation. See upstream issues #331 as well as #332 for
more information.
Downgrade to v4.0.9 until these are ironed out.
Tested on: ipq40xx-generic
Fixes commit 0a6891feac ("jool: update to v4.1.0")
Signed-off-by: David Bauer <mail@david-bauer.net>
As miniupnpd is running as root, libcap(-ng) can be used to limit its
capabilities.
libcap-ng is very small, so this isn't a problem.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The two unique packages "Unbound light" and "Unbound heavy"
were not working well due to the fact that Unbound is mostly
its library. Tools and helpers would crash. Instead a reasonable
default Unbound is built. Also up select options like python
are added. libevent and libpthreads are options to down select.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Disable several options to enable compilation.
Simplified several configure options.
Remove pointless configure var.
Added ssh hinting patch. Some SSH incompatibility.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Use the newly introduced configure script.
Use PKG_INSTALL for consistency between packages.
Use PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Add new subpackage containing pam authentication module. Shouldn't
affect dependencies and nothing changes, there is just one more module
enabled for people interested in it.
Signed-off-by: Michal Hrusecky <michal@hrusecky.net>
If miniupnpd is installed but disabled or not running, the hotplug
script will query uci for keys that don't exist and grep a temporary
config file that doesn't exist, resulting in the following errors:
uci: Entry not found
grep: /var/etc/miniupnd.conf: No such file or directory
These would arise when an interface is brought up or down, and are
more confusing than helpful, especially when miniupnpd is disabled.
Suppress these errors.
Signed-off-by: David Ehrmann <ehrmann@gmail.com>
b933f9cf0cb254e368027cad6d5799e45b237df5 in base made several changes
to OpenWrt's libssp support. It seems this workaround is no longer
needed.
Simplified the configure script slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Switched to new upstream.
Added PKG_BUILD_PARALLEL for faster compilation.
Refreshed and fixed up patches.
Fixed up license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Unbound has a quirk and may reply on a different device address.
When Unbound answers with from-address different than it
received queries on, it may cause trouble for select VPN and
firewall configurations. Ensure Unbound replies with the same
address by changing this default.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
* add anti_ad blocklist source
* made SafeSearch provider configurable, you can limit
SafeSearch to certain providers
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
* update to 4.12.3
* update/remove patches
* disable netbios port 139 on 'DISABLE_NETBIOS' option or missing 'nmbd'
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Includes:
- test_storage: further refactoring, added test functionality, and TESTING.md to describe testing approach
- tcpsocket: implement client_read_cb with ustream_read my wheels are much worse than offical wheels.
- Revert "tcpsocket: implement client_read_cb with ustream_read my wheels are much worse than offical wheels."
- uci: fix arm64 compiling
Fixes: #12488
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* add regional list source for czech/slovak
* add regional list source for korea
* adapt oisd_nl changes, switch to adb-syntax domains
Signed-off-by: Dirk Brenken <dev@brenken.org>
Includes:
- uci: truncate hostname at first dot
- ubus/uci/datastorage: add iface and hostname
- ubus: use strncpy and add backwards compatibility
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Since we can now configure xinet.d with uci, it is no longer necessary
to save the configuration in /etc/xinet.d/* when upgrading the system.
This was wrong anyway, because other packages can also store configuration
there. If this configuration get changed then the new/changed one will never get
applied, because the configration is always replaced with the saved
configration during sysupgrade.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
I tried Dawn and it whined at me because it didn't understand its
own packets from a different-endian host.
Mon Jun 8 10:49:12 2020 daemon.err dawn[19742]: not complete msg, len:308, expected len:872480768
Mon Jun 8 10:49:12 2020 daemon.err dawn[19742]: not complete msg, len:708, expected len:3288465408
https://github.com/berlin-open-wireless-lab/DAWN/issues/92
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
string_view is available with both boost and std.
Backported extra patch getting rid of using namespace std.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
By using the netifd for open fortivpn we are able to set up multiple
VPN connections and manage them through the netifd toolset.
This also adds support for binding an openfortivpn client to a given
interface, in which case when that interface comes online, the vpn
will be initiated via a hotplug script.
This is a breaking commit and configurations will need to be migrated
from openfortivpn.config into the /etc/config/networks.
Example configuration via /etc/config/network:
config interface 'ftvpn'
option proto 'openfortivpn'
option server 'example.com'
option username 'USERNAME'
option password 'PASSWORD'
# optional arguments follow
option local_ip '192.0.5.1'
option port '443'
option iface_name 'wan'
option trusted_cert 'CERT_HASH'
option set_dns '0'
option pppd_use_peerdns '0'
option metric '10'
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
This exposes the interface-auto option to UCI.
By default, interface-auto is disabled.
This leads to the DNS reply possibly originating from
a different address then the request was sent to.
Devices with a packet filter might not receive the reply in this case.
Enabling interface-auto ensures the reply is sent with the
source-address the request was sent to.
Signed-off-by: David Bauer <mail@david-bauer.net>
Includes:
- ubus/datastorage: don't repeatedly ask devices for beacon reports if
don't support it
- uci: fix loading of config
- utils/ubus: fix memory leak at blobmsg_format_json
- ubus: add local flag to network overview
- ubus: fix network overview
- network/tcpsocket: make sure every msg is complete before handle
- datastorage: refactor to support scalability testing
- network/tcpsocket: make sure every msg is complete before handle
- ubus: fix network overview
- ubus: add local flag to network overview
Signed-off-by: Nick Hainke <vincent@systemli.org>
The configure script confusingly sets CXXFLAGS to gnu++11 but does
not use that to check the important stuff. Fix that.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- Update haproxy download URL and hash
- This version introduces backtrace-support via backtrace(), however, it must be disabled because neither MUSL nor UCLIBC support it (build fails because of missing execinfo.h)
- Our previous UCLIBC patch is now obsolete and has been removed. We now only disable libcrypt support.
- A new patch was backported from the haproxy dev-branch which fixes an IFDEF which should only allow GLIBC to use dladdr1 and make builds fall back to dladdr when using other c-libs. The previous logic was bogus and broke the build on UCLIBC.
Signed-off-by: Christian Lachner <gladiac@gmail.com>
* remove dumb list cache
* start adblock processing after adding/removing
list sources via CLI
* add regional list source for france
Signed-off-by: Dirk Brenken <dev@brenken.org>
Refactor the package so init script is installed from the binary instead
of an init script embedded in the package.
Signed-off-by: Olivier Poitrey <rs@nextdns.io>
Add an option for adding rules based on source interface.
The default 0.0.0.0/0 src and destination ip addresses has been removed. It is unclear
how the 'any' family of rules would have worked, as it appears each rule always required an
ipv4 or ipv6 address src and destination address. With this change, the any family will work
again.
I also cleaned up a bunch of repeated code around adding the iptables rules for
ipv4/ipv6/any in making the change.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
This is needed since openvswitch 2.13 commit 2a97891eb23b
("Documentation: Work with sphinx-build for Python 3 also.")
The 4th patch was also reworked to serve as another guard
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Compile with USELIBCAP=1 to make use of POSIX capabilities. This will
save the required capabilities needed for transparent proxying for
unprivileged processes.
Signed-off-by: Gabor Seljan <sgabe@users.noreply.github.com>
* fix regex capture (to conform std)
* fix issues for Clang/libcxx (warnings/includes)
* fix CONFLICTS in the Makefile
* use /bin/sh in host scripts and shellcheck them
* add callback for setting arguments in ubus::call
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
Add alternative to busybox nslookup. Busybox throws an error when
the host does not have an AAAA record.
Signed-off-by: Ian Cooper <iancooper@hotmail.com>
Build is failing because HWTSTAMP_TX_ONESTEP_P2P is defined anymore on
linux net_tstamp.h.
Moreover, the usual way of linuxptp build is looking for system includes
unless user defines differently. That also was tried to fix.
PKG_RELEASE bumped to 3.
Signed-off-by: Paulo Machado <pffmachado@yahoo.com>
Updates pdns-recursor to latest release in the 4.2 series.
Includes backported fixes for CVE-2020-10995, CVE-2020-12244 and
CVE-2020-10030, plus avoid a crash when loading an invalid RPZ.
Full change log for this release is available at:
https://doc.powerdns.com/recursor/changelog/4.2.html#change-4.2.2
Signed-off-by: James Taylor <james@jtaylor.id.au>
Removed patch
`03-configure-allow-to-manually-disable-POSIX-capabiliti.patch` that has been backported into release.
Signed-off-by: Jan Hak <jan.hak@nic.cz>
The existing interface selection/detection code was incomprehensible at
worst and convoluted at best. The uci config file suggested it
understood an external ipv6 interface but in reality the init script
took no notice. Re-work it so it is at least comprehendible and takes
notice of ipv6 interface details if specified.
Update the hotplug script to use the same interface selection/detection
code as the init script and take note of ipv6 interface selection, only
restarting miniupnpd on interface up events and only if that interface
isn't already known (for that ip class) by miniupnpd.
For me this has solved numerous 'flaky' startup problems, especially
with regard to ipv6.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Includes:
- dawn_iwinfo: fix whitespace
- dawn_iwinfo: indentation
- dawn_iwinfo: iwinfo_finish();
- dawn_iwinfo: filter out global interface
- dawn_iwinfo: release iwinfo after usage
- tcpsocket: fix port print
- github: set CONFIG_SRC_TREE_OVERRIDE in actions CI
- github: fix link to dawn source
- github: use v2 for checkout action
- github: add GitHub Actions CI
- ubus: only update TCP socket list when using TCP connections
- add notice that full wpad is requirement
- fix link to luci-app-dawn
- update readme and install instructions
Signed-off-by: Nick Hainke <vincent@systemli.org>
Recently, there was added libcap-ng to OpenWrt packages feed,
which is optional for Knot DNS. It enables POSIX 1003.1e capabilities.
This can restrict root (by default it runs as root) permissions and
might harm and as there isn't systemd on OpenWrt it can interfere.
There is an added patch, which introduced an option to disable libcap-ng.
This will be part of the next release.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* Replace creating an empty PYTHON3_PKG_DIR with setting filespec to an
empty value
* Disable the default Python package build recipe (with
PYTHON3_PKG_BUILD:=0) and set an empty Build/Compile
* Remove VARIANT:=python3 and PROVIDES (providing the same name as the
package)
* Add PKG_BUILD_PARALLEL:=1
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
start if kernel has missing ipv6 support
add libcap-ng support
fix some errors displayed on syslog
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
When adding suEXEC to the apache package, Alpine's package [1] served as
a template. Not enough attention was paid to the details.
Alpine uses a different layout. So for OpenWrt to use /var/www as
DocumentRoot does not make sense. /var is also volatile on OpenWrt. This
commit removes the configure argument. The default is htdocsdir.
This also does away with uidmin/gidmin 99. The default is 100, which is
fine.
Finally, the suexec binary is moved from /usr/sbin to
/usr/lib/apache2/suexec_dir. Upstream recommends installing suexec with
"4750" (see [2]) and the group set to the user's group. While that would
be possible, it would cause a few headaches on OpenWrt. The group would
need to be changed first in a post-install script and a call to chmod
would need to be made afterward, to make the binary SUID again.
It's easier to hide the SUID binary away from others in a directory.
This way we don't need to use chmod in the post-install script.
[1] https://github.com/alpinelinux/aports/tree/master/main/apache2
[2] https://httpd.apache.org/docs/2.4/suexec.html
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Some monitoring tools will run into errors when sysDescr field is empty. This was the case for cacti 1.2.8 that i'm using to monitor my network. Ideally the sysDescr field would contain some information from the overview of luci, e.g. the Model, Firmware and Kernel-Version fields, but i am stranger to OpenWRT, so I'm unable to do that.
Signed-off-by: Robert von Könemann <lordtaifleh@gmail.com>
Explain which are the options supported by the protocol, and also
which are the supported values in each (if the field has value
validation).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
ModemManager allows specifying which are the authentication protocols
to be used during the user/password context authentication with the
peer.
This protocol update allows users to provide a new 'allowedauth'
option in the interface configuration, which is then used in two
different places:
* It is sent to ModemManager in the --simple-connect call so that
modems with a network interface can perform the authentication
using their own vendor-specific protocol.
* If the connection is done using PPP, this list of protocols is used
to configure the pppd call.
If the new 'allowedauth' option is not given, all auth protocols are
implicitly allowed.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Use the upstream value for NGX_MAX_PROCESSES (=1024) again.
So it is safe to use `worker_processes auto;` (which sets it to
the number of CPUs). Also use this directive in the conf instead
of calculating the number in the init and passing it as argument.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
The upstream package supports it with a configure switch.
Defaulting to 'with SNMP support' as it was before.
Signed-off-by: Christophe Lermytte <gentoo@lermytte.be>
According to a comment in programs/pluto/kernel_xfrm_interface.c:177:
* IFLA_XFRM_IF_ID was added to mainline kernel 4.19 linux/if_link.h
with older kernel headers 'make USE_XFRM_INTERFACE_IFLA_HEADER=true'
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Integrate with uci to support 'enabled/disabled' startup option and
override netify's default auto network selection.
config netifyd
option enabled 0
option autoconfig 1
autoconfig: Use netify's in-built interface selection
else use 'internal/external_if' definitions.
Also persist important agent config across sysupgrade
agent.uuid, serial.uuid, site.uuid
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
hotplug scripts are sourced not exec'd so #!/bin/sh /etc/rc.common
doesn't pull in the functions defined in /etc/rc.common thus since
'enabled' isn't defined the following sequence always fails:
enabled miniupnpd || exit 0
Unfortunately sourcing /etc/rc.common doesn't appear to work so come up
with some alternatives.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Review of my PR to add readsb requested to use codeload. Update vallumd
to use codeload as well, so that things are consistent.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
As reported in https://github.com/openwrt/packages/issues/12072, the
imagebuilder fails due to a dependency resolution error when the userspace
packages are built using a target that has a different kernel version than
that which is being run. To resolve this, move the sqm-scripts dependency
to a new virtual package, which hopefully should be consistent with the
actual kernel module being built.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
fping requires either root or CAP_NET_PING to work, otherwise it is
useless. Use INSTALL_SUID so that fping will be setuid root, and thus
it will be usable by non-root users.
fping knows to drop root priviledges after it parses the command line
and creates the ping socket. You actually get a lot less code running
as root when you make it setuid root and run it from an unprivileged
user.
This is the same way net/iputils already handles "ping", which has the
same requirements.
Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br>
Linux kernel and iproute2 together now implement strict checking of the
existence of route tables.
Previously kernel does not support filtering by table id, now it does
and will error with nlmsgerr "ipv4: FIB table does not exist".
Previously iproute2 dump all routes and filter by table id in userspace,
now this has changed with iproute2 commit c7e6371bc4af ("ip route: Add
protocol, table id and device to dump request")
Error scene
root@OpenWrt:/# ip route flush table 100
Error: ipv4: FIB table does not exist.
Flush terminated
root@OpenWrt:/# echo $?
2
Fixes: https://github.com/openwrt/packages/issues/12095
Ref: https://lists.openwall.net/netdev/2019/05/02/105
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
When libevhtp is added to a package's PKG_BUILD_DEPENDS (i.e. for
seafile-server), libevhtp's target package dependencies are not
automatically selected, in particular libevent2-openssl and
libevent2-pthreads.
Moreover, if libevent-openssl and libevent2-pthreads are not selected,
OpenSSL and thread support are disabled when compiling libevent2, which
in turn causes a compile error when building libevhtp.
This adds a config option, LIBEVHTP_BUILD_DEPENDS, that will select
libevent2-openssl and libevent2-pthreads (via LIBEVHTP_BUILD_SELECT)
when it is selected.
Other build dependencies are moved to PKG_BUILD_DEPENDS.
This also updates seafile-server to remove the (indirect) dependencies
added in 13d843fec1 and instead select
LIBEVHTP_BUILD_DEPENDS.
This also updates the maintainer's email address and adds myself as
another maintainer.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
The init.d script for sshd never generates an ecdsa HostKey as seen
here:
for type in rsa ed25519
do
# check for keys
key=/etc/ssh/ssh_host_${type}_key
[ ! -f $key ] && {
# generate missing keys
[ -x /usr/bin/ssh-keygen ] && {
/usr/bin/ssh-keygen -N '' -t $type -f $key 2>&- >&-
}
}
done
so we'll never succeed at loading one. Get rid of the resultant
error message in logging:
May 5 17:13:59 OpenWrt sshd[20070]: error: Unable to load host key: /etc/ssh/ssh_host_ecdsa_key
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
If BI_PARM is never set, it's "" and causes
infinite loop (before my PR sent upstream) or
error out (after my PR sent upstream).
Append -b option only if it's valid.
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
To use eap tls, 'tmpdir' must be created before server starts.
This 'tmpdir' is used to store and verify client certificate,
and therefore radiusd do 'chmod go-rwx'.
If 'tmpdir' does NOT exists, server failed to start and default
'tmpdir' is '/tmp/radiusd'. So init script MUST create default
'tmpdir' like other directories.
Signed-off-by: Eiji MATSUMOTO <toudaiman@gmail.com>
More threads can lead to a problem if a luci-app makes a fork
(e.g. for executing a command). Parallelism is still achieved
by using `processes = 3`.
Make the log more verbose by filtering only standard messages
for start/stop/reload out (leaving one line each).
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
Openwrt is a single user system. So keepalived is runnig as root.
If we add the config options `script_user root` and
`enabled_script_security' the following warnings are gone.
> local1.info Keepalived_vrrp[5382]: SECURITY VIOLATION - scripts are
being executed but script_security not enabled.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
As wifidog-ng builds a kernel module, it must use a PKG_BUILD_DIR in
KERNEL_BUILD_DIR instead of BUILD_DIR, otherwise old build artifacts may
be incorrectly reused when switching between different targets of same
architecture without a full clean.
Instead of fixing up the override, just remove it and instead move the
kernel.mk include above package.mk, so PKG_BUILD_DIR is set up correctly
by default.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
fix mips runtime by backporting some yang changes from master
added commited fixes to 7.3
also add option for snmp support
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Add possibility for user to provide setup and cleanup scripts for
additional flexibility. Setup-script takes precedence over the built-in
behavior of uacme.
This helps users with more complex use-cases to utilize uacme to update
certificates without adding complexity to the provided run.sh script.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Add possibility for user to provide setup and cleanup scripts for
additional flexibility. Setup-script takes precedence over the built-in
behavior of acme.
This helps users with more complex use-cases to utilize acme to update
certificates without adding complexity to the provided run.sh script.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
An interface can have both a /64 and a /128 from a provider.
In such a case, use the address from the /64 to do the ping check, not
the /128.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
Since 19.07, netifd will not try to bring a device up
after someone brought it down. This way, there is no need
to rename the device.
It also fixes a rename error on 19.07 when the *_down device
was being in use (by netifd?).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* Remove preinst, the default prerm script will stop the service
* Use default Python package filespec and shebang fix
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This updates the package to use the default Python package build recipe,
adds a src package, and changes to download from PyPI (using pypi.mk).
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
And libevent2-pthreads to DEPENDS.
While building with -j12 I seem to get:
[ sometimes this also includes libevent2-openssl ]
```
-- EVHTP_VERSION : 1.2.18
-- EVHTP_DISABLE_SSL : OFF
-- EVHTP_DISABLE_EVTHR : OFF
-- EVHTP_DISABLE_REGEX : OFF
-- EVHTP_BUILD_SHARED :
-- EVHTP_USE_JEMALLOC :
-- EVHTP_USE_TCMALLOC :
-- CMAKE_BUILD_TYPE : Release
-- CMAKE_INSTALL_PREFIX : /usr
-- CMAKE_BINARY_DIR : /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18
-- CMAKE_CURRENT_BINARY_DIR : /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18
-- CMAKE_CURRENT_SOURCE_DIR : /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18
-- PROJECT_BINARY_DIR : /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18
-- PROJECT_SOURCE_DIR : /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18
-- CMAKE_MODULE_PATH : /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/cmake
-- CMAKE_SYSTEM_NAME : Linux
-- CMAKE_SYSTEM_VERSION : 1
-- CMAKE_C_COMPILER : /home/sandu/work/openwrt/openwrt/staging_dir/toolchain-i386_pentium4_gcc-8.4.0_musl/bin/i486-openwrt-linux-musl-gcc
-- CMAKE_AR : /home/sandu/work/openwrt/openwrt/staging_dir/toolchain-i386_pentium4_gcc-8.4.0_musl/bin/i486-openwrt-linux-musl-gcc-ar
-- CMAKE_RANLIB : /home/sandu/work/openwrt/openwrt/staging_dir/toolchain-i386_pentium4_gcc-8.4.0_musl/bin/i486-openwrt-linux-musl-gcc-ranlib
-- CFLAGS : -Os -pipe -march=pentium4 -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -ffile-prefix-map=/home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18=libevhtp-1.2.18 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro
-DNDEBUG
-- Configuring done
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
LIBEVENT_THREAD
linked by target "evhtp" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18
linked by target "test_proxy" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "example_basic" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "test_client" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "example_https_client" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "test_vhost" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "test_basic" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "test_extensive" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "example_chunked" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "test_query" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "test_perf" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "example_pause" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "example_https_server" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "example_vhost" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
linked by target "example_request_fini" in directory /home/sandu/work/openwrt/openwrt/build_dir/target-i386_pentium4_musl/libevhtp-1.2.18/examples
-- Generating done
CMake Warning:
Manually-specified variables were not used by the project:
CMAKE_ASM_COMPILER
CMAKE_ASM_COMPILER_ARG1
CMAKE_MODULE_LINKER_FLAGS
CMAKE_SHARED_LINKER_FLAGS
DL_LIBRARY
CMake Generate step failed. Build files cannot be regenerated correctly.
```
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Error was:
The domain 'example.com' seems to have a ECC cert already, please add '--ecc' parameter if you want to use that cert.
Signed-off-by: David Yang <mmyangfl@gmail.com>
* add 'status_service' as workaround to init for 19.07
* fix 'wifionice' auto-login script
* fix autologin script matching
* change wifi scanning to logical interface name,
no longer use the radio device
Signed-off-by: Dirk Brenken <dev@brenken.org>
On some platforms where interfaces come up very slowly, this can
cause a race-condition with dhcpd coming up before all the interfaces
have finished initializing.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
This removes Python build variants and adds PYTHON3_PKG_BUILD:=0 (where
appropriate) for the Seafile packages.
This also updates the way the Python bindings packages are packaged,
using automake installation instead of manual install recipes.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This removes Python-related build variants, and adds
PYTHON3_PKG_BUILD:=0 and minor build adjustments (where appropriate),
for non-Python packages. There should be no changes to build output.
This also updates some include paths for python3-package.mk and/or
python3-host.mk to be relative to the package Makefile.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This renames "internal" recipes to use the Python3/ prefix and clarifies
the names (RunTarget to Run, Mod to ModSetup, Shebang to FixShebang).
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This changes the recipe name prefix from Build/Compile/HostPy3 to
HostPython3, and clarifies some of the names (RunHost to Run, Mod to
ModSetup).
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
HostPython3 only adds a few environment variables before running host
Python. It has only two users, Build/Compile/HostPy3RunHost and
Build/Compile/HostPy3RunTarget.
HostPython3 also accesses $(PYTHON3PATH), even though python3-host.mk
does not include python3-package.mk, where the variable is defined.
This removes HostPython3 and has its two users run host Python directly.
This also combines the environment variables of HostPython3 and the two
users into HOST_PYTHON3_VARS and PYTHON3_VARS.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
If set_hostapd_nr config flag is set, dawn will insert the nr reports
to allow the hostapd to answer to nr requests from clients.
Improve the synchronization of rcpi and rsni in the network.
Further, clients with bad 802.11k were sending beacon reports with
bssid 00:00:00:00:00:00. Catch those corner cases.
Signed-off-by: Nick Hainke <vincent@systemli.org>
If one file is a hard link to another, `mv` will not overwrite it;
`rm -f` the destinations beforehand.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
DAWN has a race condition with umdns that prevents dawn from surviving
a reboot.
Increase procd start and stop of dawn to 81.
Further, network is sometimes not ready. Add utimer to check if socket
binds correctly.
Signed-off-by: Nick Hainke <vincent@systemli.org>
This is to address the need for specifying dependency on a wget
implementation with ssl support.
Now we have a game of names for opkg
1. uclient-fetch: minimal version by openwrt project
2. wget-nossl: gnu wget w/o ssl support
3. wget-ssl: for the moment since this commit, gnu wget w/ ssl support
4. wget: uclient-fetch, wget-nossl, or wget-ssl
5. gnu-wget: wget-nossl or wget-ssl
By the time we provide some dummy package like uclient-fetch-ssl and
make it also provide wget-ssl, I guess by then we will also need
gnu-wget-ssl...
Ref: https://github.com/openwrt/packages/issues/11534
Ref: https://github.com/openwrt/packages/pull/9941
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* new upstream version 7.16.6
* fixing platform identifier for openwrt x86
(boinc issue https://github.com/BOINC/boinc/issues/3595)
* protected configuration from update
Signed-off-by: Christian Dreihsig <christian.dreihsig@t-online.de>
* add 'ca-bundle' dependency
* fix a sort bug in report engine
* fix potential bugs in the f_extconf function
Signed-off-by: Dirk Brenken <dev@brenken.org>
This is cosmetic only, since openssl is the first one being defined, but
it avoids a warning in scripts/config, after upgrading to kconfig-v5.6:
tmp/.config-package.in:102839:warning: choice default symbol
'DNSDIST_OPENSSSL' is not contained in the choice
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
glibc needs an extra header included.
Also cast time values to 64-bit in preparation for 64-bit time_t for
32-bit platforms.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Transmission should stop early on system shutdown to avoid
for example fstab unmount disks when transmission is writing.
Signed-off-by: Francesco G <gfrancesco@users.noreply.github.com>
This minor version bump fixes:
CVE-2020-1934
CVE-2020-1927
Upstream added cross-compile compatibility to apxs, so we can drop a sed
script. Upstream also added the OpenWrt layout, so we can drop our local
copy.
The OpenSSL patch to remove deprecated symbols doesn't apply anymore and
gets removed.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* removed 'hphosts' from sources (discontinued)
* fixed a "out of range" bug and another small issue
in the f_dnsup function
* add three new sources: 'anudeep', 'stopforumspam' and 'youtube'
* changed 'list' behaviour, the source file has now
a higher precedence than the archive file (see readme)
* update readme, added missing parameters & more
Signed-off-by: Dirk Brenken <dev@brenken.org>
Change dependency requirements based on kernel version. Ultimately in a
post Linux 4_14 world the differentation can be removed. In the short
term this allows post 4_14 kernels to use in-tree versions of the cake
shaper.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* fixed an oversight introduced in the last 3.99 pre-release series,
only relevant for "raw" mode e.g. dnscrypt-proxy users
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fix dependency issue
* fix query timeouts in web frontend (seen with many selected lists),
now the query comes back latest after 30 seconds, to prevent any
timeouts, with all results to this point.
* add missing parameter in readme.md
Signed-off-by: Dirk Brenken <dev@brenken.org>
This version of obfsproxy will cease to function once Python 2 is
removed from the feed. Upstream has indicated[1] that this package will
not be updated to use Python 3.
This package will be added to the abandoned packages feed.
[1]: https://trac.torproject.org/projects/tor/ticket/31057
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This version of danish will cease to function once Python 2 is removed
from the feed. The maintainer has indicated[1] that this package will
not be updated to use Python 3.
This package will be added to the abandoned packages feed.
[1]: https://github.com/openwrt/packages/issues/8893#issuecomment-489312682
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
In preparation for generating nftables-no/json variants, swap dependency
order to prevent following recursive dependency warnings:
tmp/.config-package.in:73879:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:73879: symbol PACKAGE_luci-app-nft-qos depends on PACKAGE_luci-app-nft-qos
tmp/.config-package.in:854:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:854: symbol PACKAGE_nft-qos depends on PACKAGE_nft-qos
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
When building with strongswan-ipsec disabled, strongswan fails to build
because the ipsec.conf file does not exist. Fix this by moving the
ipsec.* files and directories to the strongswan-ipsec package.
Closes#10879 while keeping ipsec.conf to avoid breaking existing
setups, as opposed to #11709.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Fix proto_notify_error usage. In this function only a definition shall
be returned, which will later appear in the ubus status output of the
interface and not a whole string.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* Update to 7.80
* Add "full" variants for nmap and ncat that support Lua scripts (and
OpenSSL)
* Replace libcxx fix with upstream patch[1] (CHANGELOG change was
removed)
* Switch ndiff to use Python 3 (using a patch from Debian[2], which
comes from an upstream PR[3] plus a port of ndiff/setup.py)
[1]: ea4e2d6657
[2]: 0510c602dd/debian/patches/0004-Python3-port-of-ndiff.patch
[3]: https://github.com/nmap/nmap/pull/1807
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Dawn is a decentralized WiFi controller.
Just install dawn and the APs will find each other via umdns.
They periodically exchange information about connected clients, wireless
statistics and other needed information. With that, the daemon load
balances clients between different APs through association control.
Further, the daemon exposes through ubus the hearing map and the
complete wireless network overview. The hearing map is the list of all
probe requests seen from a client from all APs that are running the
controller.
Hearing map:
ubus call dawn get_hearing_map
Network overview:
ubus call dawn get_network
Dawn has a graphical user interface called luci-app-dawn. With that, the
load balancing and other useful settings can be controlled.
Signed-off-by: Nick Hainke <vincent@systemli.org>
* new package dependencies: coreultis-sort and
a download util with SSL support
* focus on speed (multicore-support) to handle quite big lists
* include 38 pre-configured blocklist sources in a compressed
json file (/etc/adblock/adblock.sources.gz)
* dynamic SafeSearch support for google, bing, duckduckgo,
yandex, youtube and pixabay (CNAME (bind) & IP (dnsmaq, unbound))
* DNS backend autodetection
* Download Utility autodetection
* Report Interface autodetection
* Easy cron wrapper to set an adblock related auto-timer for
automatic blocklist updates
* raw domain/blocklist support (e.g. for dnscrypt support)
* re-add restrictive Jaillist support
* rework online doc
* Complete LuCI rewrite (migrated to client side JS)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Phase 2 buildbots with this option enabled will cleanup openvswitch
build dir which is needed later when building ovn
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Add a conffiles-section for the /etc/swanctl folder, which is used by the swanctl util. This will keep the configfiles during an sysupgrade.
Signed-off-by: Sven Roederer <S.Roederer@colvistec.de>
This is to address the need that openvswitch starting with 2.13 now
depends on libunwind for handling SIGSEGV (upstream commit e2ed6fbeb18
("fatal-signal: Catch SIGSEGV and print backtrace"))
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Compared to original packaging scheme within openvswitch, we removed
ovn-trace, ovn-detrace from openvswitch-ovn-common package. ovn-detrace
requires python libs to run, so it does not actually work out of box in
previous builds anyway.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
python2 library is now removed as the transition has been done by the
upstream project
OVN is now a separate project released with its own release plan and
it's not included within openvswitch starting with ovs 2.13.
openvswitch.mk is split out from the main Makefile for adding ovn
packages back in following commits.
The following two patches are already included in 2.13
- ovsdb-idlc-fix-dict-change-during-iteration.patch
- compat-Include-confirm_neigh-parameter-if-needed.patch
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Life changes, I'm no longer avaiable to be an sufficiently active
OpenWrt developer. Therefore removing myself from maintainer from
all packages I maintained in OpenWrt.
All the best for those who keep up the good work!
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Newer versions of the kconfig generator require quotes. Prepare the
package for an eventual update.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Newer versions of the kconfig generator require quotes. Prepare the
package for an eventual update.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
MIPS16 is not needed here.
Removed configure patch and replaced with a configure var.
Removed autoreconf as configure is no longer being patched.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Package scripts that are shipped by upstream in their binary download
* Includes setup scripts (setup-seafile.sh to use SQLite,
setup-seafile-mysql.{sh,py} to use MySQL) and control scripts
(seafile.sh, seahub.sh)
* Does not include seafile-admin, which is not shipped in upstream's
binary download. Combined with the fact that it hasn't been updated
to Python 3 suggests the script has been abandoned.
* Replace previous init scripts with a simplified script
* Previous init scripts (seafile.init, seahub.init) were modified from
older versions of seafile.sh and seahub.sh, but they haven't kept up
with changes to upstream's scripts
* New init script (seafile-server.init) start/stops both Seafile and
Seahub (there is no need to control them separately) by calling
upstream's control scripts
* Replace previous package config file with new config file
* Options in previous config file (seafile.conf) were mainly for using
Seahub in FastCGI mode. FastCGI was deprecated in Django 1.7 and
removed in 1.9; upstream's control script will only start Seahub
using Gunicorn. (Options for Gunicorn including port number can be
changed by editing /etc/seafile/conf/gunicorn.conf.py.)
* New config file (seafile-server.config) has one option that controls
where the Seafile/Seahub data directories are stored
* Patch scripts/binaries to use standard, system-wide directory
locations
* Script files (wrappers for binaries) in /usr/bin
* Binaries (not meant to be run directly by the user) in /usr/libexec
* Config files in /etc/seafile
* Pid/socket files in /var/run/seafile
* Logs in /var/log/seafile
* Include a new script to create the first admin account
* With upstream's original scripts, the user is required to
interactively create the first admin account when Seahub is started
for the first time
* The user will now use the new script (create-seafile-admin.sh) to
create the first admin account after setup (using setup-seafile.sh
or setup-seafile-mysql.sh) and before starting Seafile/Seahub
* seahub.sh is patched to only check if there is at least one admin
account and exit with an error if there is no admin account
* Remove build config options and add seafile-server-fuse package
* The console option controls whether the console window is shown when
Seafile server is run on Windows. It has no use on Linux.
* The fuse option controls whether seaf-fuse is built. (seaf-fuse is a
FUSE implementation that allows the Seafile database/file system to
be mounted to a local directory.) seaf-fuse is now always built and
is available in a separate package (seafile-server-fuse).
* Add myself as a maintainer
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Other changes include:
* Package Python bytecode in seafile-seahub, add source code package
(seafile-seahub-src)
* Instead of changing default settings, custom settings will be added to
/etc/seafile/conf/seahub_settings.py during seafile-server setup
* Use SEAFILE_UCI_DATA_DIR, which will be added to seafile-server
* Clean up Makefile formatting
* Add myself as a maintainer
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* Update package to 7.1.2
* Add Python 3 bindings package. The Python dependency is moved from
seafile-ccnet to python3-seafile-ccnet.
* Refresh patches. The path to valac does not need to be patched in
010-Makefile.patch because $(STAGING_DIR_HOSTPKG)/bin is already in
the path during package build.
* Use SEAFILE_UCI_LOG_DIR and SEAFILE_UCI_SOCKET_DIR, which will be
added to seafile-server
* Install binaries to /usr/libexec instead of /usr/bin, to mirror an
upcoming change in seafile-server
* Clean up Makefile formatting
* Add myself as a maintainer
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Pinging IPv6 hosts using an interface as a source specifier seems
troublesome. See https://bugs.openwrt.org/index.php?do=details&task_id=2897
for more detail.
Use the desired source interface's IP address instead.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
* Reapplied daf538d8c6
* Updated README
* Replaced the ipv4_resolvers option with a ipv6_resolvers_only option
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
The SUBDIRS variable has been removed in kernel 5.4, and was deprecated
since the beginnig of kernel git history in favour of M or KBUILD_EXTMOD.
Signed-off-by: David Bauer <mail@david-bauer.net>
The SUBDIRS variable has been removed in kernel 5.4, and was deprecated
since the beginnig of kernel git history in favour of M or KBUILD_EXTMOD.
Signed-off-by: David Bauer <mail@david-bauer.net>
The SUBDIRS variable has been removed in kernel 5.4, and was deprecated
since the beginnig of kernel git history in favour of M or KBUILD_EXTMOD.
Signed-off-by: David Bauer <mail@david-bauer.net>
* Added optional ipv4 resolvers UCI config option
* Added logging to logd
* Refactored verbosity UCI config option
* Filtered out any address from being added to dnsmasq
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
Compilation is broken on AArch64.
Reordered some things for consistency between packages.
Fixed license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Backport of upstream staging commit to fix compilation issue with x86_64 as
ppc64le build hosts.
42c020aab6
This fixes#10642.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Removed options UCI parameter. It's not terribly useful. Most of the
parameters can be replaced with procd functionality. procd also demands
processes to run in the foreground.
Removed -fno-builtin. It seems to be a legacy option.
Ran init script through shellcheck.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
57394bc Fix build with Linux 5.3
b95d68c Use uint for module parameter type for setup_timeout, remove -ve check
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
To avoid build failure when luci-app-sqm is selected as builtin where
the ipk will be installed on build machine
While at it, switch to using $(MAKE) instead of plain "make"
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
This update fixes#11452 since LFS detection support was added upstream.
While at, update SPDX license tag to latest standard.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Switch to standard tarball to avoid autoreconfig.
Fix license information.
Add PKG_BUILD_PARALLEL for faster compilation.
Add PKG_INSTALL for consistency with other packages.
Removed upstreamed patches. Refresh remaining one.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reordered Makefile according to
https://github.com/openwrt/packages/pull/9399#issuecomment-508727872 .
Added PKG_BUILD_PARALLEL for faster compilation.
Remove duplicated conffiles section.
Install /etc/config/stubby using INSTALL_CONF, as is done elsewhere
Run init script through shellcheck and clean it up.
Added chmod for the stubby config file, to fix a LuCI issue.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This patch enables ipset support in the unbound-daemon-heavy variant. See [1] for
instructions on how to use it.
Also fix a minor typo in the libunbound-light description.
[1] https://github.com/NLnetLabs/unbound/pull/28
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Create an anonymous inode in /tmp using O_TMPFILE and attempt to link the
file in place using linkat(). Only fall back to the old file copy when
linking the tempfile fails.
Avoids double memory use if both the temporary upload file and the
destination file are located in /tmp.
Ref: https://github.com/openwrt/luci/issues/3654
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Fix for OpenSSH pickiness about argument order to be able to use
tap devices.
* Allow tun/tap devices to be used from index 0 as demonstrated in
example config.
* Change arithmetic expressions.
Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com>
Compile the common module first, as otherwise the dependency on the
jool-common module is not detected.
Signed-off-by: David Bauer <mail@david-bauer.net>
* Log with pid instead of placeholder.
* Make sure directory for config files generated from uci config exists.
* Remove forced defaults.
* Simplify compares.
Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com>
This either uses it, or falls back on its own implementation.
Removed nls.mk. It's not needed/used.
Added size reduction FLAGS.
Cleaned up for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Fix CPE ID.
Use PKG_INSTALL for consistency between packages.
Use PKG_BUILD_PARALLEL for faster compilation.
Remove outdated std parameter.
Change URLs to HTTPS.
Various minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The host build is not used by anything.
Added PKG_INSTALL for consistency between packages.
Added PKG_BUILD_PARALLEL for faster compilation.
Added missing protobuf/host build dependency. This was previously
specified as a host dependency, which is wrong.
Removed pointless std parameter. It's only useful for old G++ versions.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Switched to codeload tarballs. Simplified the Makefile as a result.
Fixed license information.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
$(FPIC) evaluates to -fpic on ARM64, breaking compilation:
The dnsdist build system handles it properly anyway. Added --with-pic to
make it explicit.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Allocate dynamic buffer memory for decoding post data and allow post
requsts up to 128KB compared to the previos 1KB limit.
Also support downloading /proc and /sys files by falling back to
chunked transfer encoding when the file size cannot be determined.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jool as well as the jool-siit package depend on jool-common, which isn't
currently built nur packages up. Compile and include jool-common with
the jool package to fix this.
The iptables component is currently also not packaged up. Fix this also.
Signed-off-by: David Bauer <mail@david-bauer.net>
- Update to version with longer interface names.
- Add /etc/pingcheck/(on|off)line.d/ directories with an example
script. Closes#11263
Signed-off-by: Bruno Randolf <br1@einfach.org>
Since the brcm2708 target has been renamed to bcm27xx in openwrt
repo, update the dependency to the target in this package.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
fb3be84 Split out ebtables anti-leak rules in phantap-early, improve logs
e3fbe61 phantap-learn: use libnl instead of ip executable
b2c2514 phantap/Readme: Warn about OpenWrt failsafe leak
394d3b7 Readme: Update to add blogpost link and detection via Internet traffic
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* ksmbd: update to 3.1.3
* ksmbd-tools: update to 3.2.1
* add new package build option "KSMBD_SMB_INSECURE_SERVER"
* enable smb1 support to kmod by default
* add new UCI option "allow_legacy_protocols" to section [globals]
* ksmbd: release 3.1.3 version
* ksmbd: lock SMB2_QUERY_INFO_HE request with read lock
* ksmbd: fix potential racy between query_dir and ksmbd_vfs_empty_dir
* ksmbd: fix racy issue between deleting file and checking empty directory
* ksmbd: don't register interface which are member of bridge
* ksmbd: SO_REUSEADDR is no property of tcp_setsockopt
* ksmbd: release 3.1.2 version
* ksmbd: fix read caching buffer size as max_read_size
* ksmbd: fix the infinite loop of handling FSCTL_QUERY_ALLOCATED_RANGES
* ksmbd: use compounding for smb2 flush
* ksmbd: downgrade error message to debug in get_file_all_info
* ksmbd: rename usmbd to ksmbd.mountd in trvis-ci
* ksmbd: release 3.1.1 version
* ksmbd: does not work if ipv6 module is not loaded or compiled in
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: update README file
* ksmbd-tools: release 3.2.1 version
* ksmbd-tools: revert "remove glib2.0 dependancy" patch
* ksmbd-tools: release 3.2.0 version
* ksmbd-tools: update how to restart ksmbd in README file
* Revert "ksmbd-tools: disable tbuf and rbuf caching by default"
* ksmbd-tools: disable tbuf and rbuf caching by default
* ksmbd-tools: replace usmbd prefix with ksmbd prefix
* ksmbd-tools: update README file
* ksmbd-tools: fix warning ignoring return value of 'fread'
* ksmbd-tools: downgrade unsupported command print to debug
* ksmbd-tools: remove GLIB_LIBS in Makefiles
* ksmbd-tools: rename usmbd, smbuseradd, smbshareadd to ksmbd.mountd, ksmbd.adduser and ksmbd.addshare
* ksmbd-tools: fix null pointer dereference in _list_remove
* ksmbd-tools: fix the sanity check fails depending on the password length
* ksmbd-tools: fix build error(not found glib.h)
* ksmbd-tools: remove glib-2.0 dependancy
* ksmbd-tools: update README to add libglib2.0-dev for Ubuntu preprequisite packages
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Add tests for nginx-ssl-util and nginx-ssl-util-nopcre using (fake)chroot.
Clean the code up making nginx-ssl-util a header file.
Both changes are for better (future) code quality only.
There are minor functional improvements:
* fix compiler error of gcc7 by using std=c++17
* fix error if there is no lan/loopback interface
* notice instead of error message if there is no default server
* add ipv6-prefix-assignment.*.local-address.address for LAN
* add CONFLICTS in Makefile for choosing the right version
* add cast to release of unique_ptr to avoid warning
* add version message to help message
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
It was provided by both the freeradius3 and freeradius3-mod-realm packages.
Now provided by the freeradius3 package only.
Signed-off-by: Robby K <robbyke@gmail.com>
gettid happens to be supported by all glibc, musl and uclibc, but
configure cannot detect it when cross-compiling. This adds a configure
variable for it.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Added missing limits header. This is normally included in fortify-headers,
which I have disabled locally.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Properly quote arguments when assembling the command line and eval the
proto_run_command() invocation in order to prevent the shell from
improperly splitting the command arguments on $IFS.
Fixes: #10137
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- Major version jump from v2.0 to v2.1
- Update haproxy download URL and hash
- Add new patches (see https://www.haproxy.org/bugs/bugs-2.1.2.html)
- Stop building LUA 5.3 in the haproxy build-process and use liblua5.3 as a dependency instead
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Changelog:
* Fix OpenWRT with existing forwarder + fix dnsmasq restore issue
* Refactor service execution to better report errors
* Refactor merlin tz setup so it does not need to curl on boot
* Improve upgrade command for install.sh
* Do not mask curl error on install
* Fix timezone logging issue with Merlin
* Add support for Merlin John's fork
* Add raspbian support to installer
* Fix upgrade not reinstalling service
* Limit the aarch64 fix to merlin
* Reset DHCP DNS to self on Merlin router setup
* Fix memory issue with aarch64 based router
* Update Go version
* Allow override of detected env
* Setup timezone correctly on Merlin init script
* Don't ignore curl error on install
* Fix Asus Merlin John’s fork trust store issue
* Fix synology auto setup
* Fix report client info not enabled with setup-router option
* Add support for edgeos DHCP lease file locations
* Fix signal handling when running as a service
* Fix exit menu keyboard shortcut
* Do not fail on upgrade if uninstall failed
* Fix exit menu in installer
* Remove failing upx (for now)
* Make sure nextdns keeps running once ssh session is closed
* Add auto setup of Synology with DHCP server enabled
* Use router's DNS to discover more names
* Get A/AAAA from both answer and addition sections
* Ignore certain invalid names during discovery
* Fix activate with setup-router
* Fix serveral install issues
* Add exponential backoff to mdns probe retry
* Correctly end dhcp lease probing when discovery is cancelled
* Store DHCP/MDNS discovered addrs separately to avoid ping/pong
discovery
* Add DHCP lease support to client discovery
* Do not report mdns listen unreachable error as start will retry
* Reimplement mdns client discovery
* Fix installer GOARCH detection with arm6+
* Fix bin install on platforms needing sudo
* Correctly detect edgeos and ddwrt as routers
* Fix install.sh sudo
* Disable upx as it break many platforms
* Fix installer regression with merlin
* Fix mips64 detection
* Fix OpenWRT detection
* Fix UPX post build script
* Fix install with John's Asuswrt-Merlin fork
* Fix more DDWRT
* Fix DDWRT support
* Fix merlin service add/remove
* Use UPX to compress binaries typicially used on routers
* Revert "Remove direct dep on reflect"
* Use letters for installer menus
* Fix install script for upgrades not working if binary is running
* Do not return an error on mdns listen if at least one interface worked
* Fix installer for synology
* Fix pfSense support
* Remove the logs for each server on each connect
* Move install instructions to wiki
* Fix install.sh uid detection with merlin
* Fix install.sh for arm6+
* Add Synology init system support
* Fix install.sh
* Add a generic router setup that just changes the listen to public
* Update README
* Add auto setup support for EdgeOS
* Restore per OS install instruction in readme during installer beta
* Refactor install.sh
* Remove dep on golang.org/x/net/ipv[4|6]
* Remove direct dep on reflect
* Rewrite the zeroconf code to use dnsmessage instead miekg/dns
* Add auto setup support for DD-WRT
* Improve arch detection
* Add auto setup support for OpenWRT
* Add automatic router setup support
* Fix service
* Remove dep en seq on sysv style init scripts
* Add Entware init system support
* Report init system used on install and in UA
* Add EdgeOS support
* Reads /etc/hosts before forwarding queries to the upstream
* Fix localhost resolution with Linux arch empty /etc/hosts
* Use /etc/hosts file to resolve listen address and list on all IPs
listed
* Add support for multiple router firmware
* Fix hardened privacy disabling dual stack
* Add a config set sub command and refactor commands handling
* Add support for activate on freebsd
* Fix inverted MAC matching
* Add unit test for conf prefix match #35
* Activate uses listen address instead of static 127.0.0.1
* Improve FreeBSD integration
* Add FreeBSD support
* Fix a typo
* Use zip for windows archive
Signed-off-by: Olivier Poitrey <rs@nextdns.io>
Edited PKG_RELEASE to 1
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Compile tested: arm_cortex-a15_neon-vfpv4, TP-Link Archer C2600, master
Run tested: TP-Link Archer C2600
Change log for v2.99:
[FIX] Fixed broken JSON parsing (include missing uuid_site).
[FIX] FreeBSD: Fixed 10x support.
[FIX] OPNsense: Fixed path to xmllint.
[IMP] Switched to libtcmalloc minimal.
[IMP] Added metadata extraction from SSDP queries/responses.
[IMP] Added automatic building of bundled gperftools when enabled.
[IMP] Removed bundled packages that are no longer needed.
[IMP] Always display JSON status even when stale.
[IMP] CentOS: Added support for CentOS 8.
[IMP] CentOS: Removed support for CentOS 6.
[IMP] OPNsense: Added support for OPNsense 19x.
Signed-off-by: Darryl Sokoloski <darryl@sokoloski.ca>
Instead of the default nginx.conf file this file is a small variant
without examples that enables the /etc/nginx/conf.d/ directory.
It will pull in all configuration files from the conf.d directory.
So, other packages can add their server parts in the conf.d directory
without modifying the main nginx.conf file (cf. #9860).
Changed also the default logging behavior:
error_log stderr; # the init forwards it to logd
access_log off;
See the updated documentation at:
https://openwrt.org/docs/guide-user/services/webserver/nginx
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
Hurricane Electric provides a free IPv6inIPv4 tunnel. It changed its ipv4 ddns service, fully needed to keep the ipv6 tunnel up, to the domain tunnelbroker.net. Besides, the old he.net script was bugged because it doesn't had a [USERNAME] placement but instead two [DOMAIN]. The new tunnelbroker.net update URL, still provided by Hurricane Electric, is https://[USERNAME]:[PASSWORD]@ipv4.tunnelbroker.net/nic/update?hostname=[DOMAIN]&myip=[IP] and it gets the response good or nochg
Signed-off-by: Euler Alves <euler@alves.pro.br>
(fixed-signed-off-by and prefixed)
Signed-off-by: Rosen Penev <rosenp@gmail.com>
PKG_RELEASE was incremented to 15 because of a fix in files/services
Signed-off-by: Euler Alves <euler@alves.pro.br>
(fixed-signed-off-by and prefixed)
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Since commit a62c0e5 apu-1-config is no longer being stipped down with
regards to being called with "--link-libtool". Example:
$ ./staging_dir/target-mips_24kc_musl/usr/bin/apu-1-config --link-libtool
-L/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/lib -R/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/lib -laprutil-1
$
Before the mentioned commit the "-R" argument was stripped off. And when the
Makefile adds this to TARGET_LDFLAGS this then ends up in the compiler test, as
an argument for the compiler, causing build failure:
checking whether the C compiler works... no
configure: error: in `/builder/shared-workdir/build/sdk/build_dir/target-arm_mpcore+vfp_musl_eabi/subversion-1.13.0':
configure: error: C compiler cannot create executables
config.log shows what's wrong:
configure:3140: x86_64-openwrt-linux-musl-gcc -Os -pipe ... <snip> ... -R/home/sk/tmp/sdk/master-x86-64/staging_dir/target-x86_64_musl/usr/lib -laprutil-1 conftest.c >&5
x86_64-openwrt-linux-musl-gcc: error: unrecognized command line option '-R'
This commit does away with these flags, they're not needed anyway. FPIC
is also removed, because it's detrimental to the applications [1] and
unnecessary as well.
Fixes: #11139
[1] https://wiki.gentoo.org/wiki/Project:Hardened/Position_Independent_Code_internals
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
In OpenWrt this module is available, but not part of the main package.
This commit disables the LoadModule directive for this module. Otherwise
following the installation of the main apache package the start of the
server would fail (due to the absence of this particular module).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This way there's no need to worry about overwriting another httpd binary
or symlink from another package, for example busyboxes httpd.
The init script is also renamed to apache2 for consistency.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* rename smbd->ksmbd (upstream name change)
* ksmbd-tools: build with static glib2 (usmbd = ~90kb, smbuseradd = ~40kb)
* new etc folder location = /etc/ksmbd/smb.conf
* new database name = /etc/ksmbd/ksmbdpwd.db
* fixes "map to guest = Bad User" while userdb is also used
* fixes missing ipv6 support
* update/rename to "luci-app-ksmbd"
* remove UCI samba compatibility code for section names (ksmbd uses [share] + [globals] not [sambashare] + [global])
* ksmbd: release 3.1.1 version
* ksmbd: does not work if ipv6 module is not loaded or compiled in
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: release 3.1.0 version
* ksmbd: fix over 80 character warnings
* ksmbd: rename smbd-tools to ksmbd-tools in travis.yml
* ksmbd: fix password db file location in travis.yml
* ksmbd: rename smbd prefix function to ksmbd
* ksmbd: rename smbd prefix source files to ksmbd
* Revert "smbd: set connection status with SMBD_SESS_EXITING instead of direct destory"
* ksmbd: rename smbd to ksmbd in .travis.yml
* smbd: rename module name to ksmbd.ko
* smbd: set connection status with SMBD_SESS_EXITING instead of direct destory
* smbd: previous session with same user and same password should be deleted
* smbd: only use global session table in smb2 session
* smbd: add support for ipv6
* smbd: fix empty macro issue from smbd_debug
* cifsd: fix printing of file names in find_next
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Latest stable release, contains security fixes for EAP-PWD (side-channel leak), logrotate settings (CVE-2019-10143) and a DoS issue due to multithreaded BN_CTX access (CVE-2019-17185).
Also refreshed patches/002-disable-session-cache-CVE-2017-9148.patch due to the following changes/commits in freeradius:
bf1a1eda23a3c46544b3
Signed-off-by: Robby K <robbyke@gmail.com>
This should hopefully prevent issues with that option not showing up in the
GUI, like in #11095.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
nginx-ssl-util and nginx-ssl-util-nopcre are replacements for each other,
but cannot replace nginx-util (instead conflict with it).
The hard coded [::1] could lead to a nginx error if build without IPv6.
So, get the loopback addresses dynamically.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
* Do not destroy the iterator twice if cur==this (segfault).
* Do not add the delimiter clim=='\0' when creating the SSL directives.
* Set the right SSL_SESSION_CACHE_ARG for nginx-util get_env.
* Remove static from the constexpr that are used only for Line::build.
* Concat strings instead of appending them for not using a non-const ref
(to remove some warnings of clang-tidy -checks=google-runtime-references)
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
This allows custom config parameters to be added to the generated config
files, enabling the original intended functionality per
https://openwrt.org/docs/guide-user/services/ups/software.nut.
Example usage from /etc/config/nut_server:
config driver 'apc'
option driver 'snmp-ups'
option snmp_version 'v3'
option port '172.16.100.5'
list other 'secLevel'
list other 'secName'
list other 'authPassword'
list otherflag 'notransferoids'
config other 'other_secLevel'
option value 'authNoPriv'
config other 'other_secName'
option value 'some_username'
config other 'other_authPassword'
option value 'some_password'
config other 'otherflag_notransferoids'
option value '1'
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
add missing 'peer_id_ttl_hours' and remove 'scrape_paused_torrents'
which is not exist in transmission wiki.
Signed-off-by: Richard Yu <yurichard3839@gmail.com>
We depend on luci-compat now, which will pull in luci-base, which in turn
will pull in lua. So remove those two dependencies to maybe help with
recursive dependency resolution errors.
Fixes#5320.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Ran init script through shellcheck. Simplified several statements.
Replaced INSTALL_CONF with INSTALL_DATA. i2pd runs as non-root and so the
conf file must be accessible.
Fixed: https://github.com/openwrt/packages/issues/10977
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This can do the main work of nginx/nginx-ssl init script.
For nginx-ssl it can create selfsigned certificates, too.
It uses libpcre and libopenssl iff nginx(-ssl) uses them.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
* Install the standalone (scons-local) version
Advantages:
- The regular version of SCons requires distutils during installation;
the standalone version does not have this requirement
Disadvantages:
- The scons-local package is not available from the Fossies mirror
- The patch will need to be manually updated with each version update
* Install files to $(STAGING_DIR_HOSTPKG) instead of $(STAGING_DIR_HOST)
* Write the correct shebang into scripts instead of using the wrapper
* Update to 3.1.2
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
apr-util was updated. It doesn't provide the depend on libsqlite3
anymore, so this needs to be added to the subversion package now.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- helps build system to locate zlib
- adds depend on libgdbm if libaprutil-dbm-gdbm is selected
This fixes the two different build failures that can currently be
observed.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
When issuing an ECC certificate, acme.sh for some reason changes the name
of the directory used for the certificate state. Handle this correctly when
moving directories and updating config files.
Fixes#7941.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
--log-error in the init script was overriding it.
Added several optimizations to the init script for speed and correctness.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Update xtables-addons to 3.7
Remove linux 4.9 compatible patch as OpenWrt master no longer supports it
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Extend (and rename) the existing mii-tool package to also support
the net-tools route command.
This may be needed if you want to support other address families than
inet/inet6 like x.25.
Also bump to version 2018-11-03.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Things were done in the wrong order, leading to config_dir not being
chown'ed and subdirectories not being created in case of download_dir
being inside config_dir.
Fixes: 609109fa9 ("transmission: add seccomp filter and improve jail")
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
"fg" and "pidfile" parameters are already used in the init script,
so they are not controllable by config file anyway.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
If miniportal option is enabled, some haserl scripts are provided which
present a simple login web page. To make it functional haserl is required.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
The package doesn't need to install _everything_ to staging. This commit
reduces the amount of files that get copied over to staging. Currently
there's no package depending on apache anyway.
This adds sed scripts from buildroot (thanks!) to fix two files that are
important for cross-compiling external modules. This has been tested and
was confirmed to work with mod_gnutls taken as an example package.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Also preinst and postrm are removed. busybox's httpd isn't installed by
default, so these gimmicks seem antiquated.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This adds extra packages for certain modules (basically the ones that
incur further dependencies), support files etc. This is pretty much
follows Alpine's example.
This updates the httpd.conf patch to _not_ uncomment MIMEMagicFile
(because the module isn't loaded by default) and removes that changes
that aren't needed anymore (because of the added module support). The
patch now only changes the default user.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This gets rid of flags. For instance $(FPIC) shouldn't be forced onto
applications (see [1]).
And CONFIGURE_ARGS + CONFIGURE_VARS are broken out of Build/Configure.
This way more arguments can be added easily in the future.
The target is changed from apache to apache2 (which is used by upstream
by default). the CONFIGURE_ARGS are changed where need to enable
modules.
This also renames one patch that fixes scoreboard location (the name
004-pidfile_fix.patch didn't describe what it's doing).
Now with the OpenWrt layout in place 003-logdir_fix.patch can be
removed.
[1] https://wiki.gentoo.org/wiki/Project:Hardened/Position_Independent_Code_internals
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- version bump
- update license description
- add PKG_BUILD_PARALLEL:=1
- remove two cross-compile patches and replace them with the
cross-compile patch from buildroot (adds autoreconf to get this going)
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Provide the minimal applications and plugins for: cgi, filelog, syslog and
python3. More plugins can be added if needed by other packages. Autostart
uwsgi in emperor mode loading vassals on demand.
For now, include luci-support (maybe it will be moved to another package),
which uses the syslog plugin by default.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
Luci nginx config file for non ssl varian had user as nobody nogroup. This cause some problem with ubus use.
Luci file support package depends on uwsgi-cgi. As this package will be renamed shortly to a more generic version, make the subpackage depends on the uwsgi subpackage only.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
