Drop a number of redundant functions from luci.sys to shrink the code a bit:
* luci.sys.net.arptable() - replaced by luci.ip.neighbors()
* luci.sys.net.routes() - replaced by luci.ip.routes()
* luci.sys.net.routes6() - replaced by luci.ip.routes6()
* luci.sys.net.deviceinfo() - replaced by nixio.getaddrinfo()
* luci.sys.net.pingtest() - no known user
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The luci-mod-admin-mini network controller is the only remaining user of the
deviceinfo() call so inline the required code there so that the function can
be dropped from base LuCI in a later commit.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The result of the luci.sys.net.deviceinfo() call was never actually used
anywhere in the following code, so simply drop the invocation.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Drop the custom credentials checking in favor to perform proper session
logins via rpcd. This is needed to properly setup ACLs when spawning
rpcd sessions in order to support direct client side ubus access in the
future.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Line 3021:
msgid "Switch protocol"
sould be:
msgstr "切换协议"
This "Switch protocol" means "Change one protocol to another protocol", Not "protocol of switch deivce"
Currently there are only 2 encryption options visible for adhoc
mode. But in netifd, others are also supported and working as
expected. So adding WPA-PSK, WPA2-PSK and WPA-PSK/WPA2-PSK Mixed
mode as encryption options.
Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com>
Most users likely want the hostname of a static DHCP lease to be resolveable,
even if the corresponding host is currently offline.
Adjust the form logic to automatically set 'option dns 1' whenever a name is
specified in the static lease entry.
FIxes LEDE FS#815.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This change extends the switch VLAN configuration page to automatically
adjust interface ifname options when altering VLAN settings.
For example "eth0" is changed to "eth0.1" when a previously untagged LAN
VLAN is switched to tagged on the CPU port and vice versa.
Notifications are displayed in the page header if an auto migration was
performed.
This change should make the switch configuration more user friendly and
less prone to soft bricking.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Add support for 'ip6ifaceid' option for proto_static in LuCI.
Information about the option:
The option is optional and defaults to '::1'.
Allowed values: 'eui64', 'random', fixed value like '::1' or '::1:2'
When IPv6 prefix (like 'a🅱️c:d::') is received from a delegating
server, the ip6ifaceid suffix (like '::1') is used to form
the IPv6 address ('a🅱️c:d::1') for the interface.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Cron init script starts the service only if a crontab file
exists. If there is no crontab file at boot and the user
later creates one, he needs to manually restart the service.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
In some cases it is useful to be able to override the template used for the
sysauth login dialog.
Add a new property "sysauth_template" which allows overriding the template
name from controller files.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Prevents deletion of the UCI dns boguspriv keyword and explicitly sets it to
either 0 or removes it as the LEDE/Openwrt dnsmasq.conf default is 1 - not 0.
This allows boguspriv to be turned off from the GUI.
Signed-off-by: Warren Linton <warren@linton.id.au>
[Jo-Philipp Wich: squashed commits, updated commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
As suggested by PR #1114, use `/proc/sys/net/netfilter/nf_conntrack_count`
instead of counting the lines in `/proc/net/nf_conntrack` but use a slightly
more efficient approach which avoids spawning an extra `cat` command.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use the new hostapd functionality (in LEDE) to detect 802.11r and 802.11w
more properly. Leave the old logic in place for Openwrt.
Adjust 802.11w default value from "0" to "" in order to avoid unnecessary
"option ieee80211w 0" lines in /etc/config/wireless
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adds support for the fwmark option.
FwMark is a 32-bit fwmark for outgoing packets.
If set to 0 or "off", this option is disabled.
Signed-off-by: Dan Luedtke <mail@danrl.com>
If hostname get changed in "/etc/config/system" dnsmasq should reloaded
his config to be reached again under the URL [HOSTNAME].lan
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Openwrt theme apparently accepsts slightly different html than
Bootstrap or Material. Cahnge code to <br /> to make it compatible.
This fixes#1011
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The default hostapd/wpad mini version does not support ieee80211w
and the option's visibility in LuCI may lead it to be placed in user's
/etc/config/wireless preventing wifi from starting.
Check for hostapd/wpad full before exposing the option.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
luci ignores only 127.0.0.1 in real time connections.
The dnsmasq.init script sets up resolv.conf(s) as such.
With alternate DNS servers configured 'localhost' will
resolve to '127.0.0.1' or '::1'. The connections graph
will spam itself. openwrt/luci#996
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Add support for IEEE802.11w Management Frame Protection options.
Mention in the help text that the full version of wpad/hostapd is
needed.
Currently supported by ath9k and ath10k, and in LEDE also by
mwlwifi and mt76.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Add datatype 'hexstring' for input validaiton datatypes.
It will accept any hexadecimal string.
(no length validation, as rangelength can be used for that.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Add WPA/WPA2-PSK mixed mode to the list of allowed modes
* Add datatype validation to some fields
* Add help texts
* Reformat longest lines
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adds support for 802.11r fast transition to luci.
Corrects the deletion on nasid in issue #844
The R0KH & R1KH options are not perfect as it would be better
to separate out each option and do some sanity checking on
the values, but that is beyond my capabilities.
Signed-off-by: Warren Linton warren@linton.id.au
(squashed from three original commits in #994. commit message reworded)
The same wifi option 'nasid' is used for two purposes,
RADIUS NAS ID and 802.11r NAS ID / R0KH-ID.
In LuCI the 'nasid' option has depended on WPA-EAP/WPA2-EAP, which
can lead to accidental deletion of the option, if the user modifies
any wifi settings while he has WPA(2)-PSK & 802.11r mode.
802.11r can also be with WPA(2)-PSK, so add them to the dependency
list of allowed encryptions.
(Note: after this fix the 'nasid' field is shown unnecessarily
to "normal" WPA(2)-PSK users. It might later be set to depend on
802.11r being used, after 802.11r has been added to LuCI.)
Reference to bugs:
https://github.com/openwrt/luci/issues/844https://dev.openwrt.org/ticket/20764https://bugs.lede-project.org/index.php?do=details&task_id=274
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The previous commit erroneously used "ports" instead of "port" as name for the
option widget, causing wrong uci values to be written.
Also work around some cbi idiosyncrasies regarding MultiValue widgets which
prevented rendering the correct initial selection state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
Move the password setting into the .parse() callback to ensure that it is
updated regardless of whether "Save" or "Save & Apply" has been pressed.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Reloading the page ensures that the allowed tx power values and channel select
lists are properly populated with the new effective values.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The missing parens lead to a wrong expression precedence, causing a runtime
error when attempting to compare nil with a number.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The expiry time in a dnsmasq lease file line may be 0 (i.e.
expiry date = 01/01/1970 00:00:00 GMT) to denote an infinite
lease time, so adjust the code to properly support that.
The expiry attribute of the lease object will be set to "false"
in case of an infinite lease. This is to mimic the odhcp code below.
If the expiry date is not equal to 0, then just do exactly what was
done before (return the os.diff of current time and ts).
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
This should result in the MAC address display being the same
using odhcpd for v4 DHCP as when using DNSMasq for v4 DHCP.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
Recently a string to be translated were added to Lua source, so
I synchronized po templates and po file of each language with Lua
source.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Fixed some display problems where the UUID label of the drop down
list does not exist and the positions of other labels are misplaced
in mount settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Fixed an issue where the network name is displayed as "%q" on wlan
connection destination network settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
When converting interface names to UCI network names
webadmin fails if there is no UCI network name because
webadmin failed to ensure uciname has a value before
attempting to take a substring.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
Do not assume that the "raw" table is present on any system, instead check
/proc/net/ip{,6}_tables_names to determine which iptables tables are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Adds Korean language supported for Luci of OpenWRT. Most of msgs which
shown at UI are translated but still not completed for non-popular
features.
Signed-off-by: Weongyo Jeong <weongyo@gmail.com>
Commit 39ff053890 accidentally removed the conffiles definitions
from luci-base, statistics, splash and diag-devinfo apps.
That has caused existing config files to get overwritten if the
package has been reinstalled via opkg. Additionally, the splash
text files have not been saved in sysupgrade or backup as they
are located outside /etc/config
This commit adds back the conffiles definitions to the respective
packages.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Changes:
Saratov, Russia switches from +03 to +04 on 2016-12-04 at 02:00.
This hives off a new zone Europe/Saratov from Europe/Volgograd.
The new zone Asia/Atyrau for Atyraū Region, Kazakhstan, is like
Asia/Aqtau except it switched from +04/+05 to +05/+06 in spring
1999, not fall 1994.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
When a lease objects expires property is set to "false", its expiry time is
unlimited, so adjust the templates to properly display that state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The expiry time in an odhcpd lease file line may be -1 to denote an infinite
lease time, so adjust the code to properly support that.
The expiry attribute of the lease object will be set to "false" in case of an
infinite lease.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
We're currently just setting system time, but we don't set battery
backed RTC. Time in the RTC is only set on the graceful shutdown, which
is quite hard to achieve on embedded devices.
In other words, on systems with battery backed RTC we currently don't
handle following use case properly:
1. Set system time from web UI (sets only system time, but not RTC)
2. Unplug the device from power
Then after the reboot, we've wrong system time again, because time set
in [1] is not saved to battery backed RTC.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Note that several of the time zones now use a numeric name
that is quoted with < > (e.g. "<+03>-3")
musl 1.1.15 and earlier have a bug with < > quoted time zone names.
Fix for the bug
* has already been patched in musl upstream with
http://git.musl-libc.org/cgit/musl/commit/?id=8ca27ac4bfe73bff785d0c26c1de0da92b55e5c6
* has been committed in LEDE with
671cb35880
* has been submitted to Openwrt as pull request
https://github.com/openwrt/openwrt/pull/163
Key changes in 2016d-2016i:
---------------------------
2016d:
America/Caracas switches from -0430 to -04 on 2016-05-01.
Asia/Magadan switches from +10 to +11 on 2016-04-24.
New zone Asia/Tomsk, split off from Asia/Novosibirsk.
2016f:
Asia/Novosibirsk switches from +06 to +07 on 2016-07-24.
Asia/Novokuznetsk and Asia/Novosibirsk now use numeric time zone
abbreviations instead of invented ones.
2016g:
Turkey switched from EET/EEST (+02/+03) to permanent +03,
effective 2016-09-07. Use "+03" rather than an invented
abbreviation for the new time.
Several zones in Antarctica and the former Soviet Union, along
with zones intended for ships at sea that cannot use POSIX TZ
strings, now use numeric time zone abbreviations instead of
invented or obsolete alphanumeric abbreviations.
2016h:
Asia/Gaza and Asia/Hebron end DST on 2016-10-29, not
2016-10-21. Predict that future fall transitions will
be on the last Saturday of October.
Asia/Colombo now uses numeric time zone abbreviations like "+0530"
instead of alphabetic ones like "IST" and "LKT".
2016i:
Pacific/Tongatapu begins DST on 2016-11-06, ending on
2017-01-15. Assume future observances in Tonga will be
from the first Sunday in November through the third Sunday in
January, like Fiji. Switch to numeric time zone abbreviations
for this zone.
Northern Cyprus is now +03 year round, causing a split in Cyprus
time zones starting 2016-10-30 at 04:00. This creates a zone
Asia/Famagusta.
Antarctica/Casey switched from +08 to +11 on 2016-10-22.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit d4c3372020.
PATH inconsistencies and Host/Install arguments have been fixed in both
LEDE and OpenWrt, so we can revert the revert.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Specify reasonable sizes for metric and MTU fields to
prevent the table from being too wide.
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Now that luci-mod-admin-full figures out the proper diagnostics host
during postinstall we can remove the UCI section from the default
configuration file.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Attempt to infer the default diagnostics host for nslookup / ping / traceroute
from the various URLs in /etc/os-release. Fall back to "openwrt.org" if no
host is found to preserve backwards compatibility.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
OpenWrt doesn't provide an argument to Host/Install like LEDE does; use
HOST_BUILD_PREFIX instead, which is available on both.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Also, don't make any assumptions about the staging dir lua and LuaSrcDiet
were installed to.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Instead of defaulting to replace, even on hardware that supports multi
SSID, make the default to add. This reduces the chance of locking
oneself out when adding a second network. If you intended to replace,
ending up with two networks then deleting one is easier than recovering
when the old network configuration is gone.
Signed-off-by: Karl Palsson <karlp@etactica.com>
After clicking the "join" button on the scan list, the SSID is no longer
visible, though it's kept in the form to pass to the server.
Show the chosen SSID on the top of the page, to help people confirm that
they're joining the right network.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Simplify the sysupgrade image checksum strings in order to
avoid translating "Checksum xxx" items both for MD5 and SHA256.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Show also the sha256 checksum in addition to MD5 checksum to enable
image verification also for builds with only sha256 checksums.
If the 'sha256sum' command is not present in the system, the value
remains empty.
Note: The easiest way to get the 'sha256sum' command is to compile it
into busybox.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Fix incomplete port status display on vlan setup page when ports in the middle
are not used, e.g. some Lantiq boards use ports 0, 1, 2 and 4 for LAN ports so
JS code should not attempt to reference an undefined status element for port 3.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use a generic default topology if we cannot infer switch information from
board.json and display an error message in this case. Should fix#779 and
similar issues.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Fix the JavaScript String.format() to not trigger an exception if the argument
for an escaped format like %h or %q is undefined.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Wireless monitor interfaces usually have no SSID set in their config and
various network model utility functions did not handle this case properly,
mainly while trying to incorperate the SSID string into various description
labels.
Fall back to the internal network id (radioX.networkY) in cases where neither
the SSID nor the BSSID are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
In mod metamethod, execute string format under pcall() and rethrow error in
caller context to report caller of function in errors and not the meta
method itself.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Gracefully handle a missing diag section in /etc/config/luci when rendering
the network diagnostics tool page.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When a wireless network is disabled it can't be removed. From
wifi_overview.htm the delete call is generated as wlan0, wlan1 or
whatever. This wlan is not working because it is disabled, then LuCI
deletes the virtual radio which really is named as wlan0.
This PR fixes an Internal Server Error when requesting the Wireless Informations in luci-mod-freifunk.
It checks an unindexed value "net.iwdata".
```
/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute template dispatcher target for entry '/freifunk/status'. The called action terminated with an exception: /usr/lib/lua/luci/template.lua:97: Failed to execute template 'freifunk/public_status'.
A runtime error occured: [string "/usr/lib/lua/luci/view/freifunk/public_stat..."]:116: attempt to index field 'iwdata' (a nil value) stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:460: in function 'dispatch' /usr/lib/lua/luci/dispatcher.lua:141: in function...
```
signed-off.by: Guido Lipke <lipkegu@gmail.com>
Replace the menu item "Wifi" by "Wireless",
which is already used for page and section headings
This closes#695
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
An lua interpreter is required on the building host to run the
luasrcdiet lua script. Due to a build change, the interpreter was not
being installed to the correct location.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Cleanup /etc/config/ucitrack by removing '6relayd' item,
as the whole 6relayd package was removed in 2014.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This pull request adds a condition, which checks whether the file "/etc/config/fstab" exists before it allows access to "mount points".
Signed-off-by: Guido Lipke <lipkegu@gmail.com>
Otherwize the distrevision may be displayed twice if it contains some special matching patterns.(For example I am using "git-$hash" in my own OpenWrt branch.)
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Add support for dnsmasq uci options 'quietdhcp' and 'sequential_ip'
(disable logging, allocate ip addresses sequentially)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
restore the lookup of the freifunk community-name stored in
uci "freifunk.community.name".
In 9780ee382e
the value changed to the complete path of the community-profile, e.g.
"/etc/config/profile_berlin". This causes lookup problems on other
pages, like "mod-freifunk -> overview -> index" (view/freifunk/index.htm line37, line 54).
And as the option suggests it's the community-name not the community-profile path.
Signed-off-by: Sven Roederer devel-sven@geroedel.de
Fix the underlying _iface_ignore() function to not ignore virtual interfaces,
in order to let ignore_interface() return true for PPP and similar devices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This patch fixes the wrong visualization of Noise Margin (SNR) and Signal Attenuation (SATN) stats
Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
Check the location of the odhcpd leasefile from /etc/config/dhcp
via uci. Fallback to the default location.
This fixes#702
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Using tristate is counter-intuitive and probably doesn't provide a lot
of benefit so we use a boolean and treat "don't know" as false (because
it is safer than showing options that are not actually available).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Fix display of WAN status when WAN is provided by using WWAN device or similar with other similar similar methods.
Explanation:
Before this, protocol was fetched from /etc/config/network for interface which often is wan_4 - but protocol is configured in file as wan, and therefore protocol is always none, since configuration is made for wan and then setup as wan_4 and possibly wan_6 if ipv6 is being used. This commit uses ubus to get used active protocol. For example, in case of qmi, it displays protocol as dhcp since even if I configured wan to use qmi, dhcp was used as a protocol for getting IP address.
Update timezone data to 2016c.
2016b: http://mm.icann.org/pipermail/tz-announce/2016-March/000036.html
Changes affecting future time stamps
New zones Europe/Astrakhan and Europe/Ulyanovsk for Astrakhan and
Ulyanovsk Oblasts, Russia, both of which will switch from +03 to +04
on 2016-03-27 at 02:00 local time. They need distinct zones since
their post-1970 histories disagree. New zone Asia/Barnaul for Altai
Krai and Altai Republic, Russia, which will switch from +06 to +07
on the same date and local time. Also, Asia/Sakhalin moves from +10
to +11 on 2016-03-27 at 02:00.
As a trial of a new system that needs less information to be made up,
the new zones use numeric time zone abbreviations like "+04"
instead of invented abbreviations like "ASTT".
Haiti will not observe DST in 2016.
Palestine's spring-forward transition on 2016-03-26 is at 01:00,
not 00:00. Guess future transitions will be March's last Saturday
at 01:00, not March's last Friday at 24:00.
2016c: http://mm.icann.org/pipermail/tz-announce/2016-March/000037.html
Changes affecting future time stamps
Azerbaijan no longer observes DST.
Chile reverts from permanent to seasonal DST.
Guess that future transitions are August's and May's second
Saturdays at 24:00 mainland time. Also, call the period from
2014-09-07 through 2016-05-14 daylight saving time instead of
standard time, as that seems more appropriate now.
Note for Openwrt usage:
Either musl or busybox does not like the new timezone format.
Although the rule looks ok in /etc/TZ, timezone is interpreted wrongly
by date, uptime etc. "Old timezones" are handle correctly, but these
new "<+04>-4" style zones do not work. Example below:
Europe/Helsinki
root@OpenWrt:~# cat /etc/TZ
EET-2EEST,M3.5.0/3,M10.5.0/4
root@OpenWrt:~# uptime
11:00:52 up 18:17, load average: 0.43, 0.13, 0.11
root@OpenWrt:~# date
Wed Mar 30 11:00:55 EEST 2016
Europe/Astrakhan
( Time is showed as GMT instead of the correct zone and
zone name is parsed wrongly )
root@OpenWrt:~# cat /etc/TZ
<+04>-4
root@OpenWrt:~# uptime
08:02:52 up 18:19, load average: 0.17, 0.18, 0.13
root@OpenWrt:~# date
Wed Mar 30 08:02:59 +04>-4 2016
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Some packages have different variants that have different
capabilities depending on which libraries against which
they are linked. Add a function to check which library a
binary links against in order to determine available
functionality.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Fix a bug introduced by #561
Function 'shellsqescape' calls 'gsub' with the empty result string 'res'
instead of the actual parameter 'value'. This leads into error:
.../util.lua:160: bad argument #1 to 'gsub' (string expected, got nil)
Fix error by passing the correct parameter to the function.
After the fix, the unmount button introduced by #561 finally works.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Fix dhcpv6 ra_management option's handling of "stateless" value.
Default value for the option is 1, so trying to store ""
instead of "0" for stateless is not working.
This fixes#676
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
- Under some conditions the system will shutdown
uhttpd before the page will be delivered to
the client. Waiting one second should eleminate
this behaviour.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also
the 'nat' table for ipv6, and packages like 'adblock' utilize that table.
Currently that table is not shown on the Luci firewall status page,
although it is visible by 'ip6tables -L -v -t nat' from console.
Detect 'nat' table's presence from /proc/net/ip6_tables_names
Show 'nat' table in Status->Firewall->IPv6 if that table is present.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The version string displayed in the footer and the overview page contains
both LuCI and Openwrt versions. But due to differences in the contents
of /etc/openwrt_release the exact Openwrt revision r..... may be missing:
* In trunk that revision is included in the DISTRIB_DESCRIPTION field that
is displayed in Luci as the Openwrt version.
* In release branches, that field contains the release number like 15.05.
Revision number is always present in DISTRIB_REVISION field, so add the
revision from that field in case the revision is not already present
in the string.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adjust luci.mk and luci-base to find out correctly if Luci is built
from master or from a branch. Display that value in the footer and
the overview page.
* Evaluate the git branch in luci.mk and pass that to LuCI submodules
as a make variable. Use branch name, ignore tags.
* Deprecate svn detection in luci-base's mkversion.sh that generates
version.lua. Simply use the value passed by make.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This adds a lot of new status information about the dsl line.
It now looks like this on a Telekom line:
Status: UP
Line State: showtime_tc_sync [0x801]
Line Mode: G.993.2 (VDSL2)
Annex: B
Profile: 17a
Data Rate: 51.391 Mb/s / 10.046 Mb/s
Max. Attainable Data Rate (ATTNDR): 63.817 Mb/s / 23.908 Mb/s
Latency: 4.0 ms / 8.0 ms
Line Attenuation (LATN): 10.5 dB / 9.9 dB
Signal Attenuation (SATN): 8.2 dB / 14.4 dB
Noise Margin (SNR): 10.5 dB / 9.7 dB
Aggregate Transmit Power(ACTATP): -14 dB / 12.4 dB
Forward Error Correction Seconds (FECS): 1 / 1723485
Errored seconds (ES): 0 / 2477
Severely Errored Seconds (SES): 0 / 50
Loss of Signal Seconds (LOSS): 0 / 0
Unavailable Seconds (UAS): 31 / 31
Header Error Code Errors (HEC): 0 / 0
Non Pre-emtive CRC errors (CRC_P): 0 / 0
Pre-emtive CRC errors (CRCP_P): 0 / 0
Line Uptime: 2m 3s
ATU-C System Vendor ID: Broadcom 176.15
Power Management Mode: L0 - Synchronized
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add an empty, normally invisible label after checkboxes and radio buttons
with cbi-input-{checkbox,radio} classes to allow CSS styling them as
suggested on http://www.paulund.co.uk/style-checkboxes-with-css
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fall back to default language if "auto" is configured, but none provided by
the browser matches.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Enable setting a host-specific lease time for static hosts.
Format is similar as for the default lease time: e.g. 2m, 12h, 3d, infinite
Default lease time is used for all hosts without host-specific definition.
Support for the option was added to Openwrt trunk by r48801:
https://dev.openwrt.org/changeset/48801
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Fix left and right justify/padding in formats
* Do not emit decimal numbers for small values in %m format
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Eliminate more inline scripts in favor to global initialization, use a global
object for sharing fixed strings instead of passing them to each invocation.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
* fixed tabbed map when using NamedSection of same sectiontype
* add error message on which tab(s) the invalid/required fields are located
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Update timezone data to 2016a.
http://mm.icann.org/pipermail/tz-announce/2016-January/000035.html
Changes affecting future time stamps
America/Cayman will not observe daylight saving this year after all.
Revert our guess that it would. (Thanks to Matt Johnson.)
Asia/Chita switches from +0800 to +0900 on 2016-03-27 at 02:00.
(Thanks to Alexander Krivenyshev.)
Asia/Tehran now has DST predictions for the year 2038 and later,
to be March 21 00:00 to September 21 00:00. This is likely better
than predicting no DST, albeit off by a day every now and then.
Changes affecting past and future time stamps
America/Metlakatla switched from PST all year to AKST/AKDT on
2015-11-01 at 02:00. (Thanks to Steffen Thorsen.)
America/Santa_Isabel has been removed, and replaced with a
backward compatibility link to America/Tijuana. Its contents were
apparently based on a misreading of Mexican legislation.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Fix links to point into Github repo instead of luci.subsignal.org
- the hint to file a bug in dispatcher
- footers of Bootstrap and Firefunk themes
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Map DUIDs to their corresponding MAC addresses in order to correlate them with
IPv4 information. This is useful to e.g. identify IPv6 hosts which do not send
a name.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
* add more WPA-EAP phase2 authentication methods.
* client cert, client key and key password are only relevant for
WPA EAP-TLS, change dependency accordingly.
* add support for certificates and key for EAP-TLS phase2 auth.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
When fields got removed and readded due to unsatisfied dependencies, they
got inserted in reverse order into the dom.
Fix this issue by properly passing the element index.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
