The PR to add openthread-br in master isn't merged yet, as it has draft
status. This was merged prematurely. Revert.
This reverts commit 27dd30aadb.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The previous solution overwrote the provide from ``define
Package/libffmpeg/Default``, but that's not what was wanted.
Thus libffmpeg-full should provide three packages libffmpeg,
libffmpeg-mini and libffmpeg-audio-dec
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit c333c0e522)
* update default config file to list options alphabetically
* rearrange some of the init script code to support transition
of WebUI to javascript
* rename wan6_trigger to procd_trigger_wan6 for readability
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 7393b74457)
Fixes: 60ac7dd751 ("pulseaudio: simplify
and rework Makefile")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 7ae66ec7ca)
The previous used domain http(s)://pulseaudio.org redirects to
https://www.freedesktop.org/wiki/Software/PulseAudio/
This change enforces to use HTTPS everywhere for homepage URLs
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 00e3918069)
It should not be possible to install pulseaudio-daemon and
pulseadio-daemon-avahi at the same time as they have the same files.
Let's avoid that situation by adding conflict.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 5a5bb15949)
There were two conffiles sections and both of them were same, but for
different variants. We can have just one conffile section and use it also
for the other variant.
The same applies for the install section for different variants.
- We have two install sections, but we call the first one with the same
files and then add something more for the second variant.
- While at it to make it easier, let's change those three rows for
copying packages into the single one to make sure that I did not miss
anything. Also, we create a directory first and then move files.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 60ac7dd751)
Updated zoneinfo-all meta-package to fix warnings on build
Removed zoneinfo-simple from dependencies of zoneinfo-all as its contents are included in other packages.
Signed-off-by: Vladimir Ulrich <admin@evl.su>
(cherry picked from commit 1d88250815)
The full variant of mpd depends on pulseaudio-daemon, so it was not
possible to use the other pulseaudio variant with avahi.
Both pulseaudio daemons provides package pulseaudio, so users can choose
which variant suits them best.
Let's change the dependency to pulseaudio.
Fixes: #19187
Fixes: 2ed62adc59 ("mpd: enable pulseaudio in full package")
Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
(cherry picked from commit abe35e89f6)
* update to 7.86.0: https://curl.se/changes.html#7_86_0
* remove 300-curl-wolfssl.m4-error-out-if-wolfSSL-is-not-usable.patch as
it was fixed upstream: https://github.com/curl/curl/pull/9682
* update configure options for OpenSSL as --without-ssl is breaking build
* remove --without-libidn configure arg as it's no longer recognized
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 88009b2d5e)
Motivation of this change is that full variants provides the mini
variant and as well audio-dec package, thus you can not install both as
it fails with the following output:
Collected errors:
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavcodec.so.58
But that file is already provided by package * libffmpeg-full
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavcodec.so.58.91.100
But that file is already provided by package * libffmpeg-full
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavdevice.so.58
But that file is already provided by package * libffmpeg-full
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavdevice.so.58.10.100
But that file is already provided by package * libffmpeg-full
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavformat.so.58
But that file is already provided by package * libffmpeg-full
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavformat.so.58.45.100
But that file is already provided by package * libffmpeg-full
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavutil.so.56
But that file is already provided by package * libffmpeg-full
* check_data_file_clashes: Package libffmpeg-audio-dec wants to install file /usr/lib/libavutil.so.56.51.100
But that file is already provided by package * libffmpeg-full
* opkg_install_cmd: Cannot install package libffmpeg-audio-dec.
Let's change it to:
Installing libffmpeg-audio-dec (4.3.4-1) to root...
Collected errors:
* check_conflicts_for: The following packages conflict with libffmpeg-audio-dec:
* check_conflicts_for: libffmpeg-full *
* opkg_install_cmd: Cannot install package libffmpeg-audio-dec.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 9693bd47c5)
Fixes issue #19510 with the change in time_t with musl 1.2
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
(cherry picked from commit 61d1a86)
Changes to time_t cause SIGSEGV error on 32bit system and cause ripe
atlas malfunction. (registration successful but no traffic)
Also introduce minor patch to fix some compilation warning.
While at it move PKG_RELEASE to AUTORELEASE macro.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 14c5dfe4c1)
The newest master branch has important fixes. However, no new release is
published [0]. Switch to git and update to latest master commit.
This introduces new version scheme by using YYYY-MM-DD of the commit.
In addition, add necessary "PKG_FIXUP" and "PKG_REMOVE_FILES" to allow
compile the new version. Also add enable "PKG_BUILD_PARALLEL".
Further, use a pidfile and remove outdated patches.
https://github.com/sleinen/samplicator/issues/73
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit a6d7ed4d6d)
While running `make menuconfig`, it was discovered then there is a
recursive dependency like this:
tmp/.config-package.in:59138:error: recursive dependency detected!
tmp/.config-package.in:59138: symbol PACKAGE_libwebsockets-openssl is selected by PACKAGE_libwebsockets-mbedtls
tmp/.config-package.in:59122: symbol PACKAGE_libwebsockets-mbedtls depends on PACKAGE_libwebsockets-openssl
It is not possible with the recently added conflicts that two packages
(OpenSSL and full variant, which uses OpenSSL as well), which are almost the same
provides the same named package libwebsockets as their conflict - Mbed
TLS.
Fixes: 676c5c72b5 ("libwebsockets: OpenSSL
and mbedTLS variants should conflict")
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit a4e8cbb89a)
* rename wan6_trigger to procd_trigger_wan6
* rename update_dnsmasq_config to dnsmasq_config_update
* add the uci-defaults file to run sed on config file
* update Makefile to include uci-defaults file
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 6bd055284c)
They provide the same files, but they don't conflict to each other, this
means that users can install them side by side.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 676c5c72b5)
For some time, it is not possible to install ttyd and mosquitto-ssl at the
same time, so let's solve it that libwebsockets-full provides
libwebsockets-openssl. This allows to install ttyd and mosquitto at
the same time.
Also, we need to add conflict, because we should not have installed
libwebsockets-openssl and libwebsockets-full at the same time as they
provides the same files.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 77e682a11c)
We had been creating "rundir" but it was never used, probably leftover
from some removed function. At the same time, we were setting quite
strict rights to the socket directory (while comments sugested
otherwise).
Signed-off-by: Michal Hrusecky <michal@hrusecky.net>
(cherry picked from commit 8f6831b64b)
* add patches/020-cmakelists-add-version.patch (thanks @baranyaib90)
to add version information to the binary and fix https://github.com/aarond10/https_dns_proxy/issues/149
* modify Makefile to add version information for the binary
* rename patches/010-fix-cmakelists.patch for better readability
* revert back to service restart in WAN/WAN6 trigger
* update test.sh to test both init script and binary versions
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 61ca2f4d16)
* bugfix: properly restore empty server config for dnsmasq (to
address issue brought up in https://github.com/stangri/source.openwrt.melmac.net/pull/162)
* better handling of non-existant wan/wan6 interface for triggers
* add resolver url to ubus data for future-proofing WebUI js move
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit fbc63cb9f6)
* fixed search regression in DNS report
* removed last shallalist pointers in the init help
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit ca4c4d4fbc)
Exit directly will result procd service inactive and uci
configuration changes are no longer monitored.
Reported-by: Lvc Revincx <revincx233@gmail.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit b1651c5d54)
* When $wan/$wan6 are empty but double-quoted, it leads to creation
of an interface trigger with empty interface
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 425cef2f8c)
* fixed broken/blocked oisd download links (switched to the official github mirror)
* made sure that curl error out on http errors as well
* removed obsolete compatibility stuff from init script
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit f83baf221d)
* bugfix: canary domains persistence (as described in
https://forum.openwrt.org/t/https-dns-proxy-canary-domain-persistance/139967)
* minor: remove global variables and make them local in
service_start/service_stop/service_triggers
* minor: split DEFAULT_BOOTSTRAP into BOOTSTRAP_CF and BOOTSTRAP_GOOGLE for
better code readability
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 92a45c3985)
Fixes compilation when libiconv is missing.
Also remove pthread from glibc. No longer needed.
Cleanup Makefile for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 59cadc7c65)
Allow the user to specify the level at which irqbalance assumes the cache
domains are partitioned. Keep the default value of 2.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
(cherry picked from commit d9447cfdc2)
* made the reporting/top statistics flexible, see "top_count" parm in CLI or in LuCI (default 10), fixes#19622
* added the new blocklist source cpbl (provided by PascalCoffeeLake@gmail.com)
* added/separated Easylist/Easyprivacy blocklist sources (provided by PascalCoffeeLake@gmail.com)
* added reg_jp blocklist_source (provided by PascalCoffeeLake@gmail.com)
* removed the easylist addons from the other regional lists
* removed the second/obsolete pl regional list and renamed the first one to "reg_pl"
* updated the readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 0e19246d14)
Fixes mistake in dbe79e409d, the
cloudflare PROVIDES got mixed up with digitalocean.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit 001564ed83)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Remove PKG_RELEASE version bump
* ddns-scripts-services: provide ddns-scripts_service
* ddns-scripts-cloudflare: provide ddns-scripts_digitalocean.com-v2
* ddns-scripts-freedns: provide ddns-scripts_freedns_42_pl
* ddns-scripts-godaddy: provide ddns-scripts_godaddy.com-v1
* ddns-scripts-noip: provide ddns-scripts_no-ip_com
* ddns-scripts-nsupdate: provide ddns-scripts_nsupdate
* ddns-scripts-route53: provide ddns-scripts_route53-v1
* ddns-scripts-cnkuai: provide ddns-scripts_cnkuai_cn
https://github.com/openwrt/packages/pull/13509 renamed many ddns-scripts
packages, but didn't include a PROVIDES for the old package names to
make updates work well.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit dbe79e409d)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Remove PKG_RELEASE version bump
* make PKG_VERSION of the init script readonly to remove shellcheck
exception
* replace exit with return in the the procd scripts per:
https://github.com/openwrt/packages/pull/19617
* remove custom boot() function as it prevented creation of procd
firewall object on start on boot
* improve performance of allowing domains code
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 3ba54553ca)
tailscale version, tailscaled -version and the web UI reported the wrong
version number which doesn't cause any issues, but it can be confusing.
This is fixed by specifying the version in go ldflags similar to how
it's done in many other go packages and the official tailscale Dockerfile.
version.Long version can not be specified in GO_PKG_LDFLAGS_X because it
contains a space and GO_PKG_LDFLAGS_X is always split at a space.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit 738f44be4f)
* upstream bugfix: Add a forgotten 'NULL' initialize for ca_info
if not manually set
* make init script PKG_VERSION variable readonly so that a
shellcheck excettion can be removed
* add procd interface trigger to 'wan6' if IPv6 wan interface name
cannot be obtained on start
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit bca5d0ed8e)
Also bump Cython version to 0.29.32
And yeeeey: zip -> tar.gz
And they fixed the Intel AVX extension stuff/detection.
Which is why I deferred updating it until now.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(cherry picked from commit 5b9a66cd7c)
There are many places in the packages' install recipes whith multiple
commands being executed in the same shell invocation, separated with a
semicolon (;). The return status will depend only on the last command
being run. The same thing happens in loops, where only the last file
will determine the result of the command.
Change the ';' to '&&', and exit the loop if any operation fails.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 2e75ccbb7d)
There are six places pointing to files that do not exist any more:
- gns-import.sh in package gnunet-gns (dropped in v0.11.0)
- libgnunetdnsstub.so* in gnunet-vpn (integrated into util in v0.11.0)
- libgnunettun.so* in gnunet-vpn (integrated into util in v0.11.0)
- gnunet-service-ats-new in package gnunet (dropped in v0.12.0)
- libgnunetreclaimattribute.so.* (integrated into reclaim in v0.13.0)
- libgnunetabe.so.* in gnunet-reclaim (dropped in v0.17.2)
They were not noticed because their failing copy commands were part of
loops in which only the last operation had its exit status checked.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit fb91f8b7b0)
According to the package's configure.ac, reclaimID OpenID Connect plugin
depends on jose. It is installed by the gnunet-rest plugin package:
libgnunnetrest_openid_connect.so.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit f041796003)
Package is failing to build because it picks up libpam dependency
regardless of `BUSYBOX_CONFIG_PAM`.
Use configure args --with-pam, --without-pam to assert the option.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 8cb0ed95dd)
With the newer wget version, wget-nossl can not be compiled due to
missing library, so let's revert it.
Package wget-nossl is missing dependencies for the following libraries:
libnettle.so.8
This reverts commit 5075f5b701.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
This commit contains the following:
* Update binary to version 1.6.1
* Update README URLs in the Makefile to link OpenWrt-specific info
* Separate the binary, the init script and netifd script into 3 packages:
nebula, nebula-service and nebula-proto accordingly
* implement yml parser for init script to fetch variables from it
* add the netifd script for nebula protocol
* update test file to address all built packages
* make the PKG_VERSION variable of init/proto scripts readonly
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 51902f9206)
opkg does not offer ssl varients:
zabbix-agentd
zabbix-sender
zabbix-get
zabbix-proxy
zabbix-server
resolve this by adding ssl varients.
Signed-off-by: Scott Roberts <ttocsr@gmail.com>
(cherry picked from commit cd48d03f01)
Remove wrongly placed 'break' statement to actually jump to the most
recent version of a release branch.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit fd36c91db8)
Most notably this brings support for processing package changes such
as suggesting to replace firewall with firewall4 when updating from
21.02.x -> 22.03.y release.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 36525086ce)
03b2b56f Fix broker race condition
36f03dfd Record proxy type for proxy relay stats
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 15fdb5fa16)
1.9.9: Ludovic Rousseau
11 September 2022
- SCardEstablishContext() may return SCARD_W_SECURITY_VIOLATION if refused by Polkit
- Fix SCardReleaseContext() failure on orphan handles
- Fix SCardDisconnect() on orphan handle
- pcsc-spy: log the pioSendPci & pioRecvPci SCardTransmit() parameters
- Improve the log from pcscd: log the return code in text instead of hex
- Some other minor improvements
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit a8698d5ede)
Beware that switching to the new major version 0.17.x results in
incompatibility with clients still running 0.16.x.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 6d49ad9e5c)
This release includes a fix for CVE-2022-1215, a format string
vulnerabilty in the evdev device handling. For details, see
https://gitlab.freedesktop.org/libinput/libinput/-/issues/752
Peter Hutterer (2):
evdev: strip the device name of format directives
libinput 1.19.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit b95dbe4187)
Release date: 2022-08-11
Adresses CVE-2022-2625.
For more details, please see the release notes[1].
[1]: https://www.postgresql.org/docs/release/14.5/
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit ead096d6dd)
1.9.8: Ludovic Rousseau
11 June 2022
- Install install_spy.sh & uninstall_spy.sh scripts in docdir
- SCardTransmit(): do not fail if receive buffer is "too large"
- SCardControl(): do not fail if receive buffer is "too large"
- fix some memory leaks on shutdown
- use a better random number generator
- Some other minor improvements
1.9.7: Ludovic Rousseau
13 May 2022
- disable strict compilation by default
- fix 3 warnings
1.9.6: Ludovic Rousseau
11 May 2022
- do not fail reader removal in some specific cases (USB/Thunderbolt port)
- improve documentation regarding /etc/reader.conf.d/
- SCardGetStatusChange: speedup the case DISABLE_AUTO_POWER_ON
- configure:
. add --disable-strict option
By default the compiler arguments are now:
-Wall -Wextra -Wno-unused-parameter -Werror ${CFLAGS}
. fail if flex is not found
- fix different data races
- pcscdaemon: -v displays internal constants values:
MAX_READERNAME & PCSCLITE_MAX_READERS_CONTEXTS
- Some other minor improvements
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit db667b5b0f)
Exim version 4.96
-----------------
JH/01 Move the wait-for-next-tick (needed for unique message IDs) from
after reception to before a subsequent reception. This should
mean slightly faster delivery, and also confirmation of reception
to senders.
JH/02 Move from using the pcre library to pcre2. The former is no longer
being developed or supported (by the original developer).
JH/03 Constification work in the filters module required a major version
bump for the local-scan API. Specifically, the "headers_charset"
global which is visible via the API is now const and may therefore
not be modified by local-scan code.
JH/04 Fix ClamAV TCP use under FreeBSD. Previously the OS-specific shim for
sendfile() didi not account for the way the ClamAV driver code called it.
JH/05 Bug 2819: speed up command-line messages being read in. Previously a
time check was being done for every character; replace that with one
per buffer.
JH/06 Bug 2815: Fix ALPN sent by server under OpenSSL. Previously the string
sent was prefixed with a length byte.
JH/07 Change the SMTP feature name for pipelining connect to be compliant with
RFC 5321. Previously Dovecot (at least) would log errors during
submission.
JH/08 Remove stripping of the binaries from the FreeBSD build. This was added
in 4.61 without a reason logged. Binaries will be bigger, which might
matter on diskspace-constrained systems, but debug is easier.
JH/09 Fix macro-definition during "-be" expansion testing. The move to
write-protected store for macros had not accounted for these runtime
additions; fix by removing this protection for "-be" mode.
JH/10 Convert all uses of select() to poll(). FreeBSD 12.2 was found to be
handing out large-numbered file descriptors, violating the usual Unix
assumption (and required by Posix) that the lowest possible number will be
allocated by the kernel when a new one is needed. In the daemon, and any
child procesees, values higher than 1024 (being bigger than FD_SETSIZE)
are not useable for FD_SET() [and hence select()] and overwrite the stack.
Assorted crashes happen.
JH/11 Fix use of $sender_host_name in daemon process. When used in certain
main-section options or in a connect ACL, the value from the first ever
connection was never replaced for subsequent connections. Found by
Wakko Warner.
JH/12 Bug 2838: Fix for i32lp64 hard-align platforms. Found for SPARC Linux,
though only once PCRE2 was introduced: the memory accounting used under
debug offset allocations by an int, giving a hard trap in early startup.
Change to using a size_t. Debug and fix by John Paul Adrian Glaubitz.
JH/13 Bug 2845: Fix handling of tls_require_ciphers for OpenSSL when a value
with underbars is given. The write-protection of configuration introduced
in 4.95 trapped when normalisation was applied to an option not needing
expansion action.
JH/14 Bug 1895: TLS: Deprecate RFC 5114 Diffie-Hellman parameters.
JH/15 Fix a resource leak in *BSD. An off-by-one error resulted in the daemon
failing to close the certificates directory, every hour or any time it
was touched.
JH/16 Debugging initiated by an ACL control now continues through into routing
and transport processes. Previously debugging stopped any time Exim
re-execs, or for processing a queued message.
JH/17 The "expand" debug selector now gives more detail, specifically on the
result of expansion operators and items.
JH/18 Bug 2751: Fix include_directory in redirect routers. Previously a
bad comparison between the option value and the name of the file to
be included was done, and a mismatch was wrongly identified.
4.88 to 4.95 are affected.
JH/19 Support for Berkeley DB versions 1 and 2 is withdrawn.
JH/20 When built with NDBM for hints DB's check for nonexistence of a name
supplied as the db file-pair basename. Previously, if a directory
path was given, for example via the autoreply "once" option, the DB
file.pag and file.dir files would be created in that directory's
parent.
JH/21 Remove the "allow_insecure_tainted_data" main config option and the
"taint" log_selector. These were previously deprecated.
JH/22 Fix static address-list lookups to properly return the matched item.
Previously only the domain part was returned.
JH/23 Bug 2864: FreeBSD: fix transport hang after 4xx/5xx response. Previously
the call into OpenSSL to send a TLS Close was being repeated; this
resulted in the library waiting for the peer's Close. If that was never
sent we waited forever. Fix by tracking send calls.
JH/24 The ${run} expansion item now expands its command string elements after
splitting. Previously it was before; the new ordering makes handling
zero-length arguments simpler. The old ordering can be obtained by
appending a new option "preexpand", after a comma, to the "run".
JH/25 Taint-check exec arguments for transport-initiated external processes.
Previously, tainted values could be used. This affects "pipe", "lmtp" and
"queryprogram" transport, transport-filter, and ETRN commands.
The ${run} expansion is also affected: in "preexpand" mode no part of
the command line may be tainted, in default mode the executable name
may not be tainted.
JH/26 Fix CHUNKING on a continued-transport. Previously the usabliility of
the the facility was not passed across execs, and only the first message
passed over a connection could use BDAT; any further ones using DATA.
JH/27 Support the PIPECONNECT facility in the smtp transport when the helo_data
uses $sending_ip_address and an interface is specified.
Previously any use of the local address in the EHLO name disabled
PIPECONNECT, the common case being to use the rDNS of it.
JH/28 OpenSSL: fix transport-required OCSP stapling verification under session
resumption. Previously verify failed because no certificate status is
passed on the wire for the restarted session. Fix by using the recorded
ocsp status of the stored session for the new connection.
JH/29 TLS resumption: the key for session lookup in the client now includes
more info that a server could potentially use in configuring a TLS
session, avoiding oferring mismatching sessions to such a server.
Previously only the server IP was used.
JH/30 Fix string_copyn() for limit greater than actual string length.
Previously the copied amount was the limit, which could result in a
overlapping memcpy for newly allocated destination soon after a
source string shorter than the limit. Found/investigated by KM.
JH/31 Bug 2886: GnuTLS: Do not free the cached creds on transport connection
close; it may be needed for a subsequent connection. This caused a
SEGV on primary-MX defer. Found/investigated by Gedalya & Andreas.
JH/32 Fix CHUNKING for a second message on a connection when the first was
rejected. Previously we did not reset the chunking-offered state, and
erroneously rejected the BDAT command. Investigation help from
Jesse Hathaway.
JH/33 Fis ${srs_encode ...} to handle an empty sender address, now returning
an empty address. Previously the expansion returned an error.
HS/01 Bug 2855: Handle a v4mapped sender address given us by a frontending
proxy. Previously these were misparsed, leading to paniclog entries.
Also contains commit 51be321b27 "Fix PAM auth. Bug 2813" addressing
CVE-2022-37451.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit f2763b95af)
Noteworthy changes in version 1.18.0 (2022-08-10)
-------------------------------------------------
* New keylist mode to force refresh via external methods. [T5951]
* The keylist operations now create an import result to report the
result of the locate keylist modes. [T5951]
* core: Return BAD_PASSPHRASE error code on symmetric decryption
failure. [T5939]
* cpp, qt: Do not export internal symbols anymore. [T5906]
* cpp, qt: Support revocation of own OpenPGP keys. [T5904]
* qt: The file name of (signed and) encrypted data can now be set. [T6056]
* cpp, qt: Support setting the primary user ID. [T5938]
* python: Fix segv(NULL) when inspecting contect after exeception. [T6060]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 00bfb4f151)
When we explicitly declare, that we would like to have curl built with
wolfSSL support using `--with-wolfssl` configure option, then we should
make sure, that we either endup with curl having that support, or it
shouldn't be available at all, otherwise we risk, that we end up with
regressions like following:
configure:25299: checking for wolfSSL_Init in -lwolfssl
configure:25321: x86_64-openwrt-linux-musl-gcc -o conftest [snip]
In file included from target-x86_64_musl/usr/include/wolfssl/wolfcrypt/dsa.h:33,
from target-x86_64_musl/usr/include/wolfssl/wolfcrypt/asn_public.h:35,
from target-x86_64_musl/usr/include/wolfssl/ssl.h:35,
from conftest.c:47:
target-x86_64_musl/usr/include/wolfssl/wolfcrypt/integer.h:37:14: fatal error: wolfssl/wolfcrypt/sp_int.h: No such file or directory
#include <wolfssl/wolfcrypt/sp_int.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
and in the end thus produce curl without https support:
curl: (1) Protocol "https" not supported or disabled in libcurl
So fix it, by making the working wolfSSL mandatory and error out in
configure step when that's not the case:
checking for wolfSSL_Init in -lwolfssl... no
configure: error: --with-wolfssl but wolfSSL was not found or doesn't work
References: #19005, #19547
Upstream-Status: Accepted [https://github.com/curl/curl/pull/9682]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 9140f366ef)
This can be used for v2ray, Xray, v2rayA and some other projects,
make it generic.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 975153f93d)
[rebased into 22.03 branch]
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Project V is a set of network tools that help you to build your own computer network.
It secures your network connections and thus protects your privacy.
For more details, see https://www.v2fly.org/en_US/guide/faq.html
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 6461d1b055)
Fixes multiple security issues:
CVE-2022-38178 - Fix memory leak in EdDSA verify processing
CVE-2022-3080 - Fix serve-stale crash that could happen when
stale-answer-client-timeout was set to 0 and there was
a stale CNAME in the cache for an incoming query
CVE-2022-2906 - Fix memory leaks in the DH code when using OpenSSL 3.0.0
and later versions. The openssldh_compare(),
openssldh_paramcompare(), and openssldh_todns()
functions were affected
CVE-2022-2881 - When an HTTP connection was reused to get
statistics from the stats channel, and zlib
compression was in use, each successive
response sent larger and larger blocks of memory,
potentially reading past the end of the allocated
buffer
CVE-2022-2795 - Prevent excessive resource use while processing large
delegations
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
(cherry picked from commit 58bcd3fad37eaf56d4dbeecc0c73abe464e7e987)
* update to upstream version 2022-08-12
* add ca_certs_file option for CA certs file for curl
* add procd_add_interface_trigger for wan6 (hopefully fixes
https://github.com/openwrt/packages/issues/19531)
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 796a3dda80)
Change the CONFLICTS line from the libgd-full to libgd to fix a
recursive dependency.
While at it, remove the redundant +LIBGD_TIFF:libtiff
+LIBGD_FREETYPE:libfreetype dependencies from Package/libgd/default.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 085eb34fbf)
The following CVEs are fixed in this release:
* CVE-2022-32212: DNS rebinding in --inspect on macOS (High)
* Insufficient fix for macOS devices on v18.5.0
* CVE-2022-32222: Node 18 reads openssl.cnf from /home/iojs/build/ upon startup on MacOS (Medium)
* CVE-2022-32213: HTTP Request Smuggling - Flawed Parsing of Transfer-Encoding (Medium)
* Insufficient fix on v18.5.0
* CVE-2022-32215: HTTP Request Smuggling - Incorrect Parsing of Multi-line Transfer-Encoding (Medium)
* Insufficient fix on v18.5.0
* CVE-2022-35256: HTTP Request Smuggling - Incorrect Parsing of Header Fields (Medium)
* CVE-2022-35255: Weak randomness in WebCrypto keygen
More detailed information on each of the vulnerabilities can be found in September 22nd 2022 Security Releases blog post.
llhttp updated to 6.0.10
llhttp is updated to 6.0.10 which includes fixes for the following vulnerabilities.
* HTTP Request Smuggling - CVE-2022-32213 bypass via obs-fold mechanic (Medium)(CVE-2022-32213 ): The llhttp parser in the http module does not correctly parse and validate Transfer-Encoding headers. This can lead to HTTP Request Smuggling (HRS).
* HTTP Request Smuggling - Incorrect Parsing of Multi-line Transfer-Encoding (Medium)(CVE-2022-32215): The llhttp parser in the http module does not correctly handle multi-line Transfer-Encoding headers. This can lead to HTTP Request Smuggling (HRS).
* HTTP Request Smuggling - Incorrect Parsing of Header Fields (Medium)(CVE-35256): The llhttp parser in the http does not correctly handle header fields that are not terminated with CLRF. This can lead to HTTP Request Smuggling (HRS).
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 658621bf5e)
* add setting to enable/disable blocking access to iCloud Private Relay resolvers
* add setting to enable/disable blocking access to Mozilla resolvers
* rename variables loaded from config in the init script
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 4ff71d8e4c)
As wolfSSL is having hard time maintaining ABI compatibility between
releases, we need to manually force rebuild of packages depending on
libwolfssl and thus force their upgrade. Otherwise due to the ABI
handling we would endup with possibly two libwolfssl libraries in the
system, including the patched libwolfssl-5.5.1, but still have
vulnerable services running using the vulnerable libwolfssl-5.4.0.
So in order to propagate update of libwolfssl to latest stable release
done in commit ec8fb542ec3e4 ("wolfssl: fix TLSv1.3 RCE in uhttpd by
using 5.5.1-stable (CVE-2022-39173)") which fixes several remotely
exploitable vulnerabilities, we need to bump PKG_RELEASE of all packages
using wolfSSL library.
Same bump has been done in buildroot in commit f1b7e1434f66 ("treewide:
fix security issues by bumping all packages using libwolfssl").
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 845d81ca09)
This reverts commit 0ddec62e69 as it was
backport too soon, we need to first wait for fixed libwolfssl being
available.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
As wolfSSL is having hard time maintaining ABI compatibility between
releases, we need to manually force rebuild of packages depending on
libwolfssl and thus force their upgrade. Otherwise due to the ABI
handling we would endup with possibly two libwolfssl libraries in the
system, including the patched libwolfssl-5.5.1, but still have
vulnerable services running using the vulnerable libwolfssl-5.4.0.
So in order to propagate update of libwolfssl to latest stable release
done in commit ec8fb542ec3e4 ("wolfssl: fix TLSv1.3 RCE in uhttpd by
using 5.5.1-stable (CVE-2022-39173)") which fixes several remotely
exploitable vulnerabilities, we need to bump PKG_RELEASE of all packages
using wolfSSL library.
Same bump has been done in buildroot in commit f1b7e1434f66 ("treewide:
fix security issues by bumping all packages using libwolfssl").
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 845d81ca09)
Engine support is deprecated in OpenSSL 3.0 and for OpenSSL 3.0 the default
is to disable engine support as engine support is deprecated. For ath79 architecture
build with autodetection engine support fails, so explicitly set off for now.
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
(cherry picked from commit 62e909e845)
* fix bug in download_lists and adb_allow to prevent unintended exclisions from
the block-lists of domains containing allowed domain. Fixes issue:
https://github.com/stangri/source.openwrt.melmac.net/issues/160
* add support for returning NXDOMAIN/blocking iCloud & Mozilla canary domains,
disabled by default
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 9156ef6507)
* remove obsolete block-lists from config
* add removal of obsolete lists to config-update
* add AdGuard team's block-list to config
* improve allow command
* improve nftset support
* move config load to uci_load_validate, which required some code refactoring which
looks dramatic, but isn't
* always use dnsmasq_restart instead of dnsmasq_hup for all dns resolution options
for dnsmasq
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit f8c5fd93e7)
Section 'Persistence' in 'luci-app-mosquitto' is unusable without 'persistence'
section in config file.
Signed-off-by: Ptilopsis Leucotis <PtilopsisLeucotis@yandex.com>
8988247 Makefile: Enable warnings as errors (-Werror)
aea39ca Makefile: Respect the CFLAGS and LDFLAGS that have been passed in
189594f poemgr: Fix compiler warnings in poemgr.c
0e1a8cf pd69104: Avoid self-induced pointer casts
2d53298 uswflex: Remove unused variables and declarations
d345441 poemgr: Reorganize poemgr.h to remove forward declarations
df1a7bc contrib: remove unneccessary functions.sh loading
056a6a9 poemgr: Fix name based profile selection
b8f8f23 poemgr: prolong the power budget detection delay
9e8344a poemgr: configure power_budget to override detected limit
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 255c4e6c80)
The new package would help measuring one-way delays using ICMP type 13
packets. This is important for various scripts that automatically adjust
CAKE shaper bandwidth based on the observed bufferbloat. They need to
understand whether the delay is on the way up or on the way down, so
that they can adjust the bandwidth of the proper part of the shaper.
https://forum.openwrt.org/t/cake-w-adaptive-bandwidth-historic/108848https://forum.openwrt.org/t/cake-w-adaptive-bandwidth/135379
V2: refreshed patches
Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com>
(cherry picked from commit 688a5413d0)
snowflake-proxy doesn't write any files
=> run in read-only rootfs environment
the process needs to read SSL certs but no other files
=> only exposed path is /etc/ssl/certificates (read-only)
running as unpriviledged user with no additional capabilities
=> set no-new-privs bit
By default procd-ujail also isolates the process by executing it in
a separate new IPC and PID namespace.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 0f3d48a378)
Signed-off-by: Nick Hainke <vincent@systemli.org>
Package Tor's Snowflake system components so users can offer e.g.
a standalone Snowflake proxy on their routers or other devices.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit cf120a7eff)
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add a patch which removes a call in Libxml2Parser.cc to 'xmlSetFeature'.
This function belongs to the 'depreciated' API part and is not
available in OpenWrt builds.
According to my understanding, this call can be removed safely since
it disables the feature "substitute entities" which is disabled by default.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
(cherry picked from commit 3ec47dc85c)
Gatling is a high-performance webserver from fefe. It gives a
fairly decent feature-set at really small size. And its fast.
Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: Martin Hübner <martin.hubner@web.de>
(cherry picked from commit 83ff83e320)
When libjose is built statically, it must use --whole-archive as it uses
GCC's constructor attribute to initialize itself.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit c61b70918b)
The dependency has a PACKAGE_uacme-ualpn condition so that libev won't
be unnecessarily built if uacme-ualpn is not selected.
Remove PKG_USE_MIPS16:=0, as it is not necessary when not using the
libev that is bundled with uacme.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 1642b68d45)
* some more cleanups, forgotten with the last update
* optimized unbound syntax ('always_nxdomain' & 'always_transparent')
* optimized oisd download sources (use wilcard variants which are much smaller)
* removed superfluous version information/function
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 54f493ed9d)
* dnsmasq upstream has changed the code for domain handling
and recommends the 'local' syntax for large blocklists
* remove pipefail command, see #19043 for reference
* removed the unused 'adb_dnsinotify' parameter
* removed the 'adb_maxqueue' parameter,
the queue size will be automatically set by the number of cpu cores
* various cleanups, mostly shellcheck related
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 254b3d9380)
Patch 030:
Backported from Python main branch[^1] for Python to distinguish between glibc and musl libc SOABI.
Patch 131:
Changes PLATFORM_TRIPLET -gnu/-musl suffix detection (performed by the backported patch)
to be based on the target OS instead of the building OS.
See included patches for more detailed descriptions.
Specifically this fixes cross-compilation for mpc8548 CPUs with SPE instructions[^2] enabled.
[^1]: merged to python:main as https://github.com/python/cpython/pull/24502 'bpo-43112: detect musl as a separate SOABI'
[^2]: https://www.nxp.com/docs/en/reference-manual/SPEPEM.pdf
Co-authored-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
(cherry picked from commit 992fcd1bd8)
Re-mount '$config_file' inside the '$config_dir' will cause aria2 process unable to start.
Signed-off-by: Naraku J <74468372+Narakuku@users.noreply.github.com>
(cherry picked from commit 3eba8468e1)
One of common use cases for SMB3 server in routers is sharing hotplugged
drives. Users make many attempts setting that up which often are not
optimal.
This script handles it in the cleanest way by using:
1. hotplug.d mount subsystem
2. runtime config in the /var/run/config/
It provides a working basic solution that can be later adjusted by
modifying provided hotplug script.
A pretty much idential solution was part of the samba36 package. It was
added in the OpenWrt commit ef1efa756e0d0 ("samba36: add package with
hotplug.d script for auto sharing") as an answer for feature required by
the Rosinson company.
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit d0406d4c95)
Dynamically created shares shouldn't be stored in the /etc/config/
because of:
1. Flash wearing
2. Risk of inconsistent state on reboots
With this change all automation/hotplug.d scripts can store runtime in
the /var/run/config/samba. It's useful e.g. for USB drives that user
wants to be automatically shared.
Also: automated scripts should never call "uci [foo] commit" as that
could flush incomplete config. This problem also gets solved.
Identical feature was added to samba36 in the OpenWrt commit
5a59e2c059866 ("samba36: append config from /var/run/config/ for runtime
shares") but wasn't ported to ksmbd until now.
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c9cba61989)
Bump to latest and update Makefile to use meson which is upstream's standard.
Deleted unneeded 010-Remove-distro-check.patch (reference to configure).
Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit d957a2293b)
- Release notes:
https://github.com/syslog-ng/syslog-ng/releases/tag/syslog-ng-3.38.1
- Update the configuration file to use version 4.0 as mentioned in the
release notes to try the latest changes
Fixes: CVE-2022-38725
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 34b7af9e08)
- Bump to the latest Git version in order to increase the package version
for simpler opkg upgrade of the broken version
- (Re-)Introduce PKG_RELEASE into the package, omitting it may lead to
opkg segmentation faults under certain circumstances
- Utilize automatic include hooks to drop the isolated miniupnpd table
in favor to chains within the main inet fw4 table, otherwise PCP is
unreliable as the upnp table might accept traffic which is later
rejected by fw4
- Install a fw4 script hook to restart miniupnpd on fw4 restarts and
reloads in order to repopulate the upnp chains with forward rules
- Register the used miniupnpd configuration file and the firewall uci
configuration as change sources, otherwise `/etc/init.d/miniupnpd reload`
has no effect if the firewall or upnpd config was changed
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3c6ff6c6c9175b53453825e47f674af4881c2bc1)
Update the package to a commit that fixes an issue with removing PCP
mappings from nftables.
This also allows us to fix the nftables miniupnpd implementation on
openwrt.
In this new implementation, a table is created at the start of miniupnpd
and it is dedicated to miniupnpd with a priority above the firewall4
table. This allows miniupnpd to go ahead of the drop rules of firewall4
and forward traffic as needed. There was the possibility of adding a
chain inside the firewall4 table, but this would raise an issue where
if firewall4 was reloaded the port forwardings would be lost and
miniupnpd could be out of sync. When miniupnpd is stopped the table is
deleted, taking the port forwardings with it.
Some of this commit is based of msylgj's work, mainly the logic of the
init/hotplug scripts and the makefile build parameters.
Signed-off-by: ZiMing Mo <msylgj@immortalwrt.org>
Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
(cherry picked from commit 651a578cac)
Consider only integer part of free space in megabytes when
deciding the boundaries of the to be created partition.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit f50a289e51)
Notable Changes:
Experimental command-line argument parser API
Experimental ESM Loader Hooks API
Experimental test runner
Improved interoperability of the Web Crypto API
Dependency updates:
Updated Corepack to 0.12.1
Updated ICU to 71.1
Updated npm to 8.15.0
Updated Undici to 5.8.0
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 841b38f37a)
With heavy system logging which goes by default into `/var/log/messages`
log file which is usually placed in tmpfs/RAM one can trigger OOM killer
fairly easily, thus killing random processes and in some cases making
system unusable.
This is likely happening due to the fact, that Linux by default uses 1/2
of available RAM for tmpfs, which might be for example an issue on low
RAM devices with ath10k wireless.
So let's fix it by adding logrotate functionality which should limit the
size of `/var/log/messages` log file to 1M by default, but could be
tweaked by config knob if needed be.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 660fa63faf)
This adds conflicts between the variants,
because they provide the same files, and it should not be
possible to install them side by side. Otherwise, it might happen that
half files would be from one variant and the other half from the
other.
Also, adds provides as if you request to install ``vim`` and
``vim-full``, then the request could be satisfied even they collide,
because ``vim-full`` provides ``vim`` package.
Signed-off-by: Karel Kočí <cynerd@email.cz>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
[add commit message]
(cherry picked from commit 46c058468a)
The full variant should conflict with the default variant. This prevents that
libgd and libgd-full could be installed side by side, and also, the full
variant should provide the libgd. Otherwise, if you install libgd-full,
you can not install vnstat.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 42b36b7180)
* Update maintainer's email address
* Style Make and init file to OpenWrt standard
* Rename dnsmasq and unbound-related variables to better reflect
their use
* New 'allow' CLI parameter to quickly unblock domain(s)
* Switch to uci wrappers
* Beautify the output of the 'check' CLI parameter
* Better handling of output files directory creation error
* Support for (upcoming) dnsmasq nftsets
Signed-off-by: Stan Grishin <stangri@melmac.ca>
(cherry picked from commit 3b686b08a5)
Fixes: https://github.com/openwrt/packages/issues/19210
If libjpeg isn't selected by another package, all is fine.
But if it is selected, the stress-ng build will see it and try to build the
jpeg stressor. This would usually fail sometime and link-time.
In any case, it's better to just pick-up libjpeg as a dependency of
stress-ng. If people want to stress their system with this tool, they can
probably expect libjpeg as well.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(cherry picked from commit fc6f44b13a)
The _init() function collides with a _init() function in crti.o.
This results in the following error in OpenWrt:
arc-openwrt-linux-gnu/bin/ld: libxt_coova.o: in function `_init':
/lib/gcc/arc-openwrt-linux-gnu/11.3.0/crti.o:(.init+0x4): first defined here
collect2: error: ld returned 1 exit status
make[7]: *** [Makefile:22: libxt_coova.so] Error 1
Fix this by suing a constructor attribute instead. This function will
still be called after the shared library was loaded.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 55297e45c8)
* vpn support can be disabled (enabled by default), fixes#19107 (see trm_vpn option)
* vpn support can be limited to certain interfaces (see trm_vpnifacelist list option)
* openvpn support works now per instance (same as wireguard today)
* add an auto-login script for tplink-omada hotspots provided by Sebastian Muszynski <basti@linkt.de>
* remove pipefail command, see #19043 for reference
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 963137dcc5)
Using https://gitlab.freedesktop.org/mobile-broadband/libmbim.git to download the source code.
Enabled lto and additional gcc flags for perfomance and less size.
Modified to use meson as upstream has abandoned autotools.
Removed BUILD_PARALLEL options. These are default with ninja/meson.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
(cherry picked from commit fea19c2399)
Using https://gitlab.freedesktop.org/mobile-broadband/ModemManager.git to download the source code.
Added compile option to compile qrtr support.
Enabled lto and additional gcc flags for perfomance and less size.
Modified to use meson as upstream has abandoned autotools.
Removed BUILD_PARALLEL options. These are default with ninja/meson.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
(cherry picked from commit 6ae8b15d68)
Using https://gitlab.freedesktop.org/mobile-broadband/libqmi.git to download the source code.
Enabled lto and additional gcc flags for perfomance and less size.
Added support for selecting qmi message collection.
Selected basic qmi message collection by default (modemmanager requires it).
Modified to use meson as upstream has abandoned autotools.
Removed BUILD_PARALLEL options. These are default with ninja/meson.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
(cherry picked from commit f7cbd44540)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit e4555e03ee)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit a5e96189c3)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
When PAM is available, the build system will detect and use it, but the
package dependency was missing.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit 626be11593)
With the new OW release approaching, it might be better to get an officially
tagged upstream release in as PR#19087 just contained a fix for CVE-2022-29154
which itself introduced a few bugs.
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit eeaacc9052)
ANTFS does not compile with OpenWrt's current testing kernel 5.15,
as it needs to be modified for the Linux 5.12 idmapped mounts changes
2f221d6f7b88 ("attr: handle idmapped mounts")
https://lore.kernel.org/all/20210121131959.646623-1-christian.brauner@ubuntu.com/
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
(cherry picked from commit f043d0a7d8)
Remove nft rules file generated by ss-rules if ss-rules was or should be
turned off for by configuration. Use "fw4 restart" instead of "fw4
reload" to force the runtime rule reloading
Ref: https://github.com/openwrt/packages/pull/17937#issuecomment-1207357037
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 04ee032699)
Fix for issue #19010
Signed-off-by: John Kohl <jtk.git@bostonpog.org>
Signed-off-by: Michal Kowalski <18610805+kofec@users.noreply.github.com>
(cherry picked from commit 406adc5363)
The uuid module has been split out into a separate package with the
update to Python 3.10.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
(cherry picked from commit 52ae0a2018)
Change notes:
Updated Makefile package version and hash.
Added libpcre2 dependency
Removed USELIBPCRE make flag (no longer optional within sslh)
Updated patch 001 to work with new sslh Makefile
Signed-off-by: Martin Moreno <fett3270@yahoo.com>
(cherry picked from commit 9b90bb37ee)
makes LuaJit builds for mpc85xx targets with SPE ISA extension
enabled possible
Quoting inner commit message:
This allows building LuaJit for systems with Power ISA SPE
extension[^1] support by using soft float on LuaJit side.
While e500 CPU cores support SPE instruction set extension
allowing them to perform floating point arithmetic natively,
this isn't required. They can function with software floating
point to integer arithmetic translation as well,
just like FPU-less PowerPC CPUs without SPE support.
Therefore I see no need to prevent them from running LuaJit
explicitly.
[^1]: https://www.nxp.com/docs/en/reference-manual/SPEPEM.pdf
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
(cherry picked from commit a4a484fbca)
Use PKG_FIXUP:=autoreconf when building cryptsetup to prevent
accidental linkage against host libraries.
Fixes: #19011
Reported-by: @dreirund
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit ad0ac5198d)
89d5d2e091 only patched importing
MutableMapping from collections, but importing Mapping has to be patched
too
Closes: #18681
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit 4bd2169e73)
The decision to switch the default to wolfSSL was taken because of
hostapd back from when curl was in base. Unfortunately, not only is
wolfSSL bigger but it has also been causing issues recently. There's
also no relation between hostapd and curl.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 0a65e4c6fa)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit 281d156a35)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
bb362db datastorage: fix ap_array_unlink_entry always returns NULL
47e98ef network: ping pong keepalive for tcp connections
eba0354 network: add timeout for client connections
In the dawn config the con_timeout needs to be added:
option con_timeout '60'
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 204fd77bbc)
Fixes compilation under some hosts.
Added PKG_BUILD_PARALLEL for faster compilation.
Some small cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 8588715b26)
The glib2 package fails to build when CONFIG_PKG_FORTIFY_SOURCE_1 or
CONFIG_PKG_FORTIFY_SOURCE_2 is enabled in the OpenWrt config:
In file included from ../glib/libcharset/localcharset.c:28:
/home/stijn/Development/OpenWrt/openwrt/staging_dir/toolchain-powerpc64_e5500_gcc-11.2.0_musl/include/fortify/stdio.h: In function 'snprintf':
/home/stijn/Development/OpenWrt/openwrt/staging_dir/toolchain-powerpc64_e5500_gcc-11.2.0_musl/include/fortify/stdio.h:101:9: error: format not a string literal, argument types not checked [-Werror=format-nonliteral]
101 | return __orig_snprintf(__s, __n, __f, __builtin_va_arg_pack());
| ^~~~~~
/home/stijn/Development/OpenWrt/openwrt/staging_dir/toolchain-powerpc64_e5500_gcc-11.2.0_musl/include/fortify/stdio.h: In function 'sprintf':
/home/stijn/Development/OpenWrt/openwrt/staging_dir/toolchain-powerpc64_e5500_gcc-11.2.0_musl/include/fortify/stdio.h:110:17: error: format not a string literal, argument types not checked [-Werror=format-nonliteral]
110 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack());
| ^~~
/home/stijn/Development/OpenWrt/openwrt/staging_dir/toolchain-powerpc64_e5500_gcc-11.2.0_musl/include/fortify/stdio.h:114:17: error: format not a string literal, argument types not checked [-Werror=format-nonliteral]
114 | __r = __orig_sprintf(__s, __f, __builtin_va_arg_pack());
| ^~~
Disable fortify source for the package as a workaround.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit 723c4360c4)
Needs an extra header. pthread.h is also no longer implicitly included.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 4605f98b41)
This removes the guard "CONFIG_BUILD_PATENTED" for the ffmpeg build
feature for mpd-full. ffmpeg was already unconditionally registered as a
dependency (at line 51).
The ffmpeg package already handles whether or not to include patented
codecs internally using the same config flag, so guarding its use as a
dependency here does not appear necessary anymore.
(For reference: guard "BUILD_PATENTED" was introduced in 44eb12f for
ffmpeg, then partially removed by 326c973).
Signed-off-by: Pacien TRAN-GIRARD <pacien.trangirard@pacien.net>
(cherry picked from commit f3fe7de8dc)
cdn.postfix.johnriley.me serves a certificate for a different domain
name.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit d4feef97e6)
* fix another vpn corner case
* add support for javascript based captive portals (location.href)
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 3ae7a46b82)
wolfssl/options.h needs to be included before the other wolfssl headers
to enable OpenSSL API required to build the package.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 8fb3fd3dac)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit 591f8cad33)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit 9b1cdb7b52)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
This is the latest commit that touches the xr_usb_serial_common-1a dir.
The changes are restricted to whitespace fixes and kernel version
adaptations:
ecc6ebe xr_usb: Use tty_driver_kref_put for kernel 5.15 and above
caf6d25 xr_usb: Use tty_alloc_driver for kernel 5.15 and above
a42b7e6 xr_usb: Compilation fixes for kernel 5.14
497adb7 #39 fix compilation for newer linux kernels
9103471 xr_usb: fix some whitespace errors
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit eadab32450)
libarchive looks for ext2fs headers during configure, and if it finds
them it will expect to find them during compile, or on the rare occasion
when they aren't it will fail:
libarchive/archive_entry.c:59:55: fatal error: ext2fs/ext2_fs.h: No such file or directory
As we just need headers for some type constants, let's re-use headers
from tools/e2fsprogs package which are always available.
Reported-by: Adam Dov <adov@maxlinear.com>
Suggested-by: Paul Eggleton <paul.eggleton@linux.intel.com>
References: https://git.yoctoproject.org/poky/commit/?id=f0b9a7cf9f80be1917e45266fa201f464a28c1e5
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 797945dfaa)
Update to v16.16.0
Release for the following issues:
HTTP Request Smuggling - Flawed Parsing of Transfer-Encoding (Medium)(CVE-2022-32213)
HTTP Request Smuggling - Improper Delimiting of Header Fields (Medium)(CVE-2022-32214)
HTTP Request Smuggling - Incorrect Parsing of Multi-line Transfer-Encoding (Medium)(CVE-2022-32215)
DNS rebinding in --inspect via invalid IP addresses (High)(CVE-2022-32212)
https://nodejs.org/en/blog/vulnerability/july-2022-security-releases/
No vulnerabilities related with openssl (uses system openssl)
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 8db0d09823)
This also:
* Adds PKG_SOURCE_DATE and PKG_SOURCE_VERSION to PKG_VERSION (by
default, when PKG_VERSION is defined, PKG_SOURCE_DATE and
PKG_SOURCE_VERSION are not used)
* Fixes package copyright
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit 2dd1c17626)
Few minor changes, like -h flag for program (help).
Added URL to package definition.
No new version release with version number, so version stays
as is, but pkg_release is still bumbed with this commit.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
(cherry picked from commit 8f66090160)
* various vpn fixes/optimizations (run tested by forum users)
* refine several log statements
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit cf1f9dc933)
- Handle bool values correctly. We get the values as bool, but collectd
requires a bool value to be numeric in the range [0, 1].
- Remove profile and mode values. Those are strings, which cannot be
represented by collectd.
- Update collectd type for some values.
- Fix latn value being present twice.
Signed-off-by: Dominik Riebeling <bluebrother@posteo.de>
(cherry picked from commit eb632da5bb)
youtube-dl is still maintained, but moves very slowly and many other
distributions instead package an active fork, yt-dlp.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit 89710ac588)
glib2's meson.build runs check cc.has_function('ngettext', args :
osx_ldflags) and, if successful, it never looks for non-libc libintl.
For musl and glibc this test is always successful.
glib2 unconditionally sets ENABLE_NLS, so during compile <libintl.h>
gets included always. But then we have a disconnect when the OpenWrt pkg
is being built with BUILD_NLS=y, because the <libintl.h> will be from
libintl-full but glib2 will not link to libintl-full.
With BUILD_NLS=n there's no problem, because the <libintl.h> will be
from libc.
In lieu of proper libintl detection in glib2's meson build, removing the
SED call from the Makefile together with the added patch sorts this out.
The SED call can be removed because when we force libintl-full use, the
meson build will put the necessary linker flag into the pkg-config file
itself.
Alpine Linux does something similar (see [1]), but they always force
the use of the external libintl. I assume they always go for full NLS
support.
[1] https://git.alpinelinux.org/aports/tree/main/glib/musl-libintl.patch
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry picked from commit 721838ddd4)
Use nft instead of iptables to open port 80 in the firewall when getting a
cert. Since nft doesn't allow deleting a rule by its contents, capture and
save the handle when creating the rule, and use that to delete.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
(cherry picked from commit d926da5182)
- Update 11 minor version to match the upstream
- Rename patches dir to reflect new gcc 11 minor version
- Drop upstream patch
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 4db8466a14)
This is based on the toolchain GCC, and aims to share as much of its
Makefile and patches with that definition. The package requires two
additional patches:
(1) 003-dont-choke-when-building-32bit-on-64bit.patch, which fixes the
`error: size of array 'test_real_width' is negative` error that occurs
when building a 32-bit GCC on a 64-bit host. (Search the Internet for
examples of this error appearing.)
(2) 980-add-nostdinc++.patch, which backports a fix from 11.3.0 (11.2.0
only).
Signed-off-by: W. Michael Petullo <mike@flyn.org>
(cherry picked from commit ceaa6e840e)
luajit provides higher performance for requests handled in Lua hooks.
It also enables access to dnsdist functionality only exposed via FFI,
and allows configurations/hooks to call functions in any C library
without providing separate bindings.
Signed-off-by: Peter van Dijk <peter.van.dijk@powerdns.com>
(cherry picked from commit 283b269c7c)
The postinst script is sourced during image build, which causes the
follow failure:
/home/stijn/Development/OpenWrt/openwrt/build_dir/target-x86_64_musl/root-x86/etc/init.d/lxc-auto: line 3: /lib/functions.sh: No such file or directory
postinst script ./usr/lib/opkg/info/lxc-auto.postinst has failed with exit code 1
Sourcing /lib/functions.sh is not needed, as /etc/rc.common does so
already. Unfortunately removing that line from the init script is not
enough to fix the problem. The postinst script should also check
IPKG_INSTROOT. As these two changes are unrelated, they should go in
separate commits, and the solution to the image build problem is to
revert the commit that introduced the breakage.
This reverts commit 2cde10b950.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit 039912dec5)
otherwise, a user would have to either manually run /etc/init.d/lxc-auto
boot or reboot the system to start using lxc.
originally committed in 2cde10b950
reverted in 039912dec5
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit 7da7356539)
* the domain whitelist feature has been extended to free up multiple nested captive portal domains.
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 0ee0aa2b53)
1. Switched to use prebuilt web files to get rid of massive Node.js.
2. Increased nofile limitation to avoid "too many open files" error.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit d629a6f8b2)
Instead of waiting for interface to be up,
wait for it to have IPs, as this is what we need.
Also do not call procd_open_instance when not ready.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
(cherry picked from commit 1dd46bca62)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit e8f6600851)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
Apply post-1.9.0 patch from upstream to fix a segfault.
savedptr can be NULL, so guard for that.
Fixes#18741
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit ab7a23102e)
Apply post-1.9.0 patch from upstream to fix the irq-->module
relation detection.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 358c2293fa)
Not every radio has also ubus support. Only query radios with ubus
functions.
Signed-off-by: Nick Hainke <vincent@systemli.org>
[fixup, call ubus.connect() once per scrape]
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
(cherry picked from commit 0a07237514)
listen_ipv6 config option is removed and we now
listen on both ipv4 and ipv6 addresses.
HTTP keepalive is enabled and set to 70s by default.
With uhttpd-mod-lua there is a small change in behavior,
all code is loaded/parsed/executed once on startup as before,
but now each request is executed in his own fork, so we can't
keep a state between requests.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
(cherry picked from commit 60460f0046)
All current node_exporter netclass metrics will be available. This includes
speed metrics per lan port on supported DSA switches.
Signed-off-by: René Treffer <treffer@measite.de>
(cherry picked from commit a315c40b72)
Description:
Update from v16.15.0
Changed handling of host's npm problems due to npm updates.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit fcfd2599d9)
This fixes "too many open files" error caused by max-file limitation
when xray processes large traffic.
Reported-by: Terry Ding <terryding77@gmail.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit d98fd52865)
Includes fix for CVE-2022-30634 (crypto/rand: Read hangs when passed
buffer larger than 1<<32 - 1).
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit 112cf09031)
This commit fixes an issue where the `libcoap-3-notls.so` is not installed,
in some cases leaving the target's root with no library and just a broken link
from `libcoap-3.so` to `libcoap-3-notls.so`.
Signed-off-by: Leo Soares <leo@hyper.ag>
(cherry picked from commit 80c4d675c2)
Major changes are:
Add support for Heimdal as the Kerberos 5 implementation.
Add smbd max io size parameter.
Accept global share options.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Upstream has finally patched the UI communication socket
creation to happen only if the irqbalance UI is enabled.
As we do not use the irqbalance UI, we can remove
our local fix implemented by 4f0c847828.
(If you want to enable irqbalance UI, the fix is still needed.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 8e71e0ad97)
Previously it was using killall with procd respand enabled
This was causing yggdrasil to restart after being killed
root@r3test-hap:/# service yggdrasil stop ; echo $? ; sleep 10s ; ps | grep yggdrasil
Terminated
143
6701 root 653m S /usr/sbin/yggdrasil -useconffile /tmp/yggdrasil.conf
6748 root 1308 S grep yggdrasil
Now it's just using whatever procd is using and see there, it actually stops
root@r3test-hap:/# service yggdrasil stop ; echo $? ; sleep 10s ; ps | grep yggdrasil
0
6802 root 1308 S grep yggdrasil
I assume there was some procd bug that kept it from being used properly
Signed-off-by: Maciej Krüger <mkg20001@gmail.com>
(cherry picked from commit 17bb2d25191704d0526bd1bdc0e9060dbf02e12b)
banIP 0.7.x is not compatible with new nft firewall (default in master and 22.03).
Mark the package as BROKEN for now.
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit a2f0257272)
The new version of vpnc supports additional DH groups for improved key exchange security.
Signed-off-by: Andreas Erhard <andreas.erhard@i-med.ac.at>
(cherry picked from commit e82106eaeb8cd43b765ba65e70a036820c03de83)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit acd8384ede34015bffbcefeb4598bf3b7bd06952)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 20876aadf847d4266a1636d5f41d4a2c4f8b0f7c)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 46ce0df5232d8031de2461e3b8d3de9bdc9b5226)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 005e114ddd0d9a6b3bf63cac1d39b5a27ef7460d)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit fb36a5226c74f8994d7882810ef29ee2f47bc47c)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 285efba8ea9c3f49334c54cd6a96b2721deb0e2b)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 3138eacbe3d92a05e8c3f45879981e302362ecb4)
With the upgrade of node.js to version 16, the npm version will also change to version 8.
This fix is to support npm@8. npm@6 can also build without problems.
The modification method is different from other node modules.
The reason is due to the npm@8 issue.
https://github.com/npm/cli/issues/4027
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit eee26dbac657d8bdf33df0c71b5affcae094ee0c)
This update also changes npm from v6 to v8.
This change also requires node module packages to be modified.
Each package will be updated later.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 28be0c92c2f883df59b346631868d45c215098f4)
Now with basic support for the Array Networks SSL VPN protocol.
Also fix the OpenSSL build. OpenConnect requires support for deprecated APIs,
for the time being, so select them if compiling against OpenSSL.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
(cherry picked from commit a85a057b14)
Both audit in the packages feed and libaudito from the base repo use the
same sources.
Have 'audit' use a different build directory than 'libaudit' package to
avoid interference between them.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit c0f26f4980)
The audit package in the packages feed share the same sources as the
libaudit package in the base repo. libaudit performs a host build, used
only by libsemanage in base.
There is no package depending on 'audit/host', so we can remove it to
avoid possible confusion.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 1d54defb0f)
Linux 5.15 does not have the linux/ipx.h header.
The patch is a partial cherry-pick (skipped ChangeLog) of upstream
commit 6b09724c6 ("Make IPX packet interpretation dependent on the ipx
header file existing").
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 7be14da0d5)
Add the poemgr package. This package is required to control the PSE
controller for the PoE outputs on the Ubiquiti UniFi Switch Flex.
Signed-off-by: David Bauer <mail@david-bauer.net>
Description:
ICU 71 updates to CLDR 41 locale data with various additions and corrections.
ICU 71 adds phrase-based line breaking for Japanese. Existing line breaking methods follow standards and conventions for body text but do not work well for short Japanese text, such as in titles and headings. This new feature is optimized for these use cases.
ICU 71 adds support for Hindi written in Latin letters (hi_Latn). The CLDR data for this increasingly popular locale has been significantly revised and expanded. Note that based on user expectations, hi_Latn incorporates a large amount of English, and can also be referred to as “Hinglish”
ICU 71 and CLDR 41 are minor releases, mostly focused on bug fixes and small enhancements. (The fall CLDR/ICU releases will update to Unicode 15 which is planned for September.) We are also working to re-establish continuous performance testing for ICU, and on development towards future versions.
ICU 71 updates to the time zone data version 2022a. Note that pre-1970 data for a number of time zones has been removed, as has been the case in the upstream tzdata release since 2021b.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit d46237f17c)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit f43a5f03bb)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
a7a7c732c0
changed package pinning from commit hash to version for some dependencies
(but not all, libnetwork is still referenced by commit)
Support the version-based pinning mechanism in addition to commit-based
Signed-off-by: Andy Dodd <atd7@cornell.edu>
(cherry picked from commit c3166c5a22)
1. Fixed init script would kill itself when trying to stop a service.
2. Upgrade privoxy release to 3.0.33
3. Set PKG_RELEASE to AUTORELEASE
Signed-off-by: He Xian <hexian000@outlook.com>
(cherry picked from commit 5d917b9578)
otherwise, a user would have to either manually run /etc/init.d/lxc-auto
boot or reboot the system to start using lxc.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
(cherry picked from commit 2cde10b950)
This adds support for the child SA to be rekeyed through the byte/packet
threshold. The default is blank (which disables the byte/packet thresholds).
Signed-off-by: Joel Low <joel@joelsplace.sg>
(cherry picked from commit 5c8af06c94)
- Removed an upstreamed patch
- Move logs to /var/log in accordance with FHS 3.0
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit ff8f25cb98)
This fixes CVE-2022-24884.
Also update the package URL to match the source repository.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
(cherry picked from commit de5671e582)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit c5b668df5b)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
- removed extra white spaces in Makefile
- changed license from GPL-3.0 to GPL-3.0-only
- added test.sh
Signed-off-by: Clark Wang <dearvoid@gmail.com>
(cherry picked from commit 580fe568d6)
Sshpass does not work well in a few scenarios. Passh is an sshpass
alternative which tries to fix the issues.
Signed-off-by: Clark Wang <dearvoid@gmail.com>
(cherry picked from commit 1221ceed8d)
- removed extra white spaces in Makefile
- changed license from GPL-3.0 to GPL-3.0-only
- added test.sh
Signed-off-by: Clark Wang <dearvoid@gmail.com>
(cherry picked from commit 17d4d05fd5)
Sexpect is another implementation of Expect which is specifically
designed for shells. It's lightweight and has no dependency on other
packages.
Signed-off-by: Clark Wang <dearvoid@gmail.com>
(cherry picked from commit 49b1e63444)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit a93b3baba1)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
Bump version to reset PKG_RELEASE counter.
Add missing dependency on ucode-mod-math which is needed for the
mkdtemp() implementation used to format UBI volumes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fix and simplify console output, make sure uvol doesn't break in case
of LVM being installed but not used.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3959a9b22c)
Shift ARGV until actual parameters start to compensate for older
versions of ucode passing the complete cmdline.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 31f02d5c1e)
Don't use features which are not yet present in the version of ucode
currently shipped with OpenWrt (such as `fs.access()` or assuming raw
mode by default).
Fix syntax error in main executable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 74caff0d59)
* Fix build which was broken by a wrong path in the Makefile.
Adapt to ucode commit 4618807 ("main: rework CLI frontend"):
* ucode now no longer needs the {% %} around each code file, remove
that and safe one level of indentation.
* ARGV now no longer includes ucode executable and script itself
Fixes: 6350c7bc6 ("uvol: replace with re-write in ucode")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 22d202e3a5)
Replace previous Shell draft-quality implementation of uvol with a
rewrite in ucode[1].
While the new code is slightly larger, it performs much better (as
we no longer fork() for parsing strings like in Shell with grep, sed
and friends).
Before:
time uvol list -j
[ ... ]
real 0m 0.82s
user 0m 0.13s
sys 0m 0.10s
After:
time uvol list -j
[ ... ]
real 0m 0.47s
user 0m 0.05s
sys 0m 0.05s
[1]: https://github.com/jow-/ucode
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 6350c7bc63)
It is costly in transmissions to add all information to each metric.
Instead, only use the "device" as a label and add all other important
labels to the "uptime" metric.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 9f3064a11c)
Update the version and add ubnt-manager to the build section.
Fixes: 76f27975a9 (" prometheus-node-exporter-lua: add ubnt-manager collector ")
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 42e841039b)
Ubnt-manager-collector collects statistics from airos devices configured
in ubnt-manager.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 76f27975a9)
This app makes it easier to work with AirOS devices. So far, only monitoring is implemented.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit e4a8d3fc29)
Remove Go 1.18 patch as upstream source has updated go dependencies
Signed-off-by: James White <james@jmwhite.co.uk>
(cherry picked from commit ff6946e73e)
Includes fixes for:
* CVE-2022-24675 - encoding/pem: stack overflow
* CVE-2022-28327 - crypto/elliptic: generic P-256 panic when scalar has
too many leading zeroes
This also adds -buildvcs=false to omit VCS information in Go programs.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit 8c0477a895)
This reverts commit 0ce744202a.
Broken everywhere else. A better solution will need to be found.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 2784618ab5)
* add new 'hblock' compilation source (XL, see https://hblock.molinero.dev for reference)
* print runtime/date information in ISO-8601 standard format
* minor cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 51a5ec6069)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit 86b8b30683)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
(cherry picked from commit 2c9c485822)
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
The forecast plugin does not require the iptables binary, it uses
libiptc instead.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit 6e132e74fd)
The connmark plugin does not require the iptables binary, it uses
libiptc instead.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit 6cb15df69a)
Let's move the iptables IPsec dependencies out of the strongswan package
and into the plugin package that actually depends on it,
strongswan-mod-updown. As the default updown script calls the iptables
binary, also add a dependency on the iptables-legacy package.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit 93fbbcbfee)
Enable AUTORELEASE in a separate commit so that the next commit can be
reverted without having to manually re-introduce it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit cf1e146858)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Includes fixes for:
* Windows builds updated to bzip2 1.0.8 to mitigate CVE-2016-3189 and
CVE-2019-12900
* CVE-2022-26488: Escalation of privilege via Windows Installer
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit bed8dc2132)
Make sure /etc/gnunet and all its files and sub-directories are owned
by gnunet:gnunet. This is somehow necessary as file ownership otherwise
doesn't survive sysupgrade.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 65f5f850f3)
It seems that Turris guys is using this package in the Turris OS, where
it is used for reForis (simple, basic UI for users)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[replace Daniel as maintainer, add commit message]
Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
(cherry picked from commit 2366b26813)
This helps in cases, when someone forgets to bump PKG_RELEASE
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 116c0d6c39)
It seems that Turris guys is using this package in the Turris OS, where
it is used for reForis (simple, basic UI for users)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[replace Daniel as maintainer, add commit message]
Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
(cherry picked from commit 934a7e22cd)
The new version includes all previously locally backported patches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 669e4a9542)
Remove backported patch which is now included in the upstream release.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit d7799595bd)
'uvol list' was broken when introducing support for the hidden volumes.
Fix that by not using 'continue' keyword to break the loop (as that
lead to skipping 'json_select ..') and using if-clause instead.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 1337c44026)
Prevent NULL-pointer on older versions of OpenWrt.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit f1969ab584)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Request root filesystem type to since it is possible now after
9d8467a748
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 6c9ab0e426)
Only notable change since 0.14.0 is that pthread_mutexattr_setkind_np()
is now no longer used.
pthread_mutexattr_setkind_np() is deprecated and non-standard.
The standard version is called pthread_mutexattr_settype()
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit d59731ba61)
This is a bugfix release for gnunet 0.16.1.
Noteworthy changes in 0.16.2 (since 0.16.1)
DHT: Fix path signature handling.
GNS: Fix BOX handling in zone apex.
NAMESTORE: Prevent storing under invalid labels.
Buildsystem: Fix build on *BSD and Guix.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 033744ac59)
Provide a new variant, nano-full, that enables almost
all functionality of nano. Only libmagic file type detection
has been left out.
Ship with a minimal /etc/nanorc that the user can modify.
nanorc documentation at
https://www.nano-editor.org/dist/latest/nanorc.5.html
Provide color highlighting for the uci config files.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 6a51794638)
In order to use feeds from GH mirror for GH actions, thus saving a lot
of resources being wasted.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit b1355832a0)
