Disable udev hwdb support instead of depending on eudev. This restores
the old behavior of pciutils. It never depended on udev.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* update midnight commander to latest stable release
* refresh subshell patch to support minimal openwrt environment
* switch to sha256 based package fingerprint
* compile & functional tested with ar71xx and x86
Signed-off-by: Dirk Brenken <openwrt@brenken.org>
One of the most common uses of the rtl-sdr suite on OpenWrt is to stream
data to a remote analyzer. This commit creates a /etc/init.d/ and
/etc/config entry for rtl-tcp, so that it can automatically launch on
startup.
Signed-off-by: Mike Miller <github@mikeage.net>
The network plugin has the option of encrypting traffic; add a
config option to allow enabling encrypting network plugin traffic.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Conflicts:
utils/collectd/Makefile
Standard LXC autostart is currently not working in OpenWrt,
therefore add our own autostart mechanism for now.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
$(CP) was defined as `cp -fpR' since the very begining of OpenWrt build
system (2006-06-22). The -R option should be enough and base packages
use only $(CP) for the same purposes just fine and BSD manual of cp also
discourages the use of `-r' option. So let's just tidy up the usage now.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
- Adds bcm43xx-3wire variant.
- Resets UART speed after firmware download.
- Prints chip name when firmware isn't found for bcm43xx.
- Increases timeout for bcm43xx.
- Moves bcm43xx firmware to lib.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
While an empty led_sysfs definition works as intended (no LED state is
touched), an error message is generated, since the appropriate sysfs
interface does not exist:
Sat Feb 27 16:42:55 2016 user.err wifitoggle: led: not found
This patch makes sure that no such error message will be generated.
Signed-off-by: Karol Babioch <karol@babioch.de>
dump1090 doesn't detect cross-compilation; instead, they check uname.
For OpenWrt, the target will always be Linux, so just forcibly set it.
Signed-off-by: Mike Miller <github@mikeage.net>
gitorious archive became available, so I could import the project
history from there into the new repo on github. Rebasing the changes
made since 2014 on top of the original git tree obviously caused
the commit hashes to differ.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
libcurl is added as dependency for gnupg-util to avoid a dependency
error.
The following invalid configuration options are removed:
--disable-ftp
--enable-fake-curl
Fixes: 0a61d56eb3 ("utils/gnupg: add new package gnupg-utils")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
eudev is a fork of systemd-udev which doesn't require all the
rest of systemd. It's suitable for running along with OpenWrt's procd,
eplacing the very outdated version of pre-systemd udev.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
eudev is a fork of systemd-udev which doesn't require all the
rest of systemd. It's suitable for running along with OpenWrt's procd,
eplacing the very outdated version of pre-systemd udev.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Update collectd, the backbone of Luci statistics, to 5.5.1
Refresh patches. Main changes:
- Remove 500-upstream-parallel-build-fix.patch (implemented upstream)
- Add 600-fix-libmodbus-detection.patch to revert an upstream change
that broke libmodbus detection in collectd's configure script
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
--with-perl-bindings= is insufficient, --without-perl-bindings is required
to actually prevent perl bindings when perl has been built for the target.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Picked up the old Makefile at 4.2.
Upgraded at 4.3 (repo move to github now: https://github.com/plougher/squashfs-tools/)
Added musl compatibility.
Enabled LZ4 compression support by default
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The current package gnupg does not allow to receive keys due to
disable-exec, disable-hkp configuration.
The patch removes these switches. To avoid unduely increasing the package
size the helper executables are put into a new package gnupg-utils.
The version is bumped to 1.4.20 to avoid an error when receiving keys.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Current configuration creates empty evtable_*.h header which makes all
the input event appear as "Unknown (null) event".
The maintainer of the project submitted a patch to fix this issue:
https://github.com/wertarbyte/triggerhappy/commit/7e5abc6
Thanks to this version bump, the old OpenWRT patch can be removed.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Building unrar together with libunrar creates conflicts that can be fixed by
doing separate builds.
Closes https://github.com/openwrt/packages/pull/2060.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* backport a slightly modified subshell patch to stable 4.8.15
(see ticket: https://www.midnight-commander.org/ticket/2742)
* enable subshell support by default
Signed-off-by: Dirk Brenken <dirk@brenken.org>
This is a small fix to allow the package to compile with gcc5
Addition of the -std=gnu89 CFLAGS.
Small correction of the copyright date of file bandwidthd.init
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
bump version to 4.8.15
fix charset / utf-8 support
fix different warnings during startup
merge all configuration files in /etc/mc
enable internal editor & charset support by default
Signed-off-by: Dirk Brenken <dirk@brenken.org>
Addition of the bandwidthd-pgsql package variant that can save also
in a postgres database.
Modification of bandwidthd.config to have the default IP address
of an OpenWrt router (192.168.1.1)
Addition of a small OpenWrt logo in the logo.gif
Compile tested on CC and trunk (ar71xx and mvebu in both cases)
run tested on CC (ar71xx) and trunk (r47397 on mvebu)
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
/etc/collectd/conf.d is referenced in the default config so should be installed to prevent the following in syslog every boot:
Fri Oct 9 02:09:38 2015 user.emerg : configfile: stat (/etc/collectd/conf.d) failed: No such file or directory
Signed-off-by: Oliver Middleton <olliemail27@gmail.com>
sane-xxx backend packages are hidden packages with custom
config and CONFIG_ALL does not select them alone. Now
sane-backends depends on +ALL:sane-backends-all.
No existing ipk is affected as the changed package/sane-backends
does not exist as an ipk.
030-musl.patch was updated to be submitted upstream. However,
the added preprocessor #if are always true for OpenWRT and will
not change the resulting code.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
This package is currently in oldpackages. Add here to keep support for gpsd.
From oldpackages, this was bumped from 3.10 -> 3.15 and includes an upstream
patch to allow building with musl.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
to make the bridge work we need to run an askfirst instance on the ttyS.
additionally add the lua scripts needed to make REST work. this is really ugly
code but it works. i already cleaned up to the original code, but there are still
issues such as a new luci session being created for each request.
Signed-off-by: John Crispin <blogic@openwrt.org>
Changes since oldpackages:
- updated to 1.0.25
* most of openwrt patches are upstreamed now
- cups dependency was completely removed
- small musl patch
- small uclibc patch
- removed link to extra libraries in libsane (used only
for preload backends)
- sane-libs and sane-backends merged and exploded into
individual packages for each backend:
* libsane for sane library (which backends should dep on)
* sane-daemon for saned daemon
* sane-xxx for sane backend for xxx
** each backend has its own custom dep libraries
* sane-backends-all (with no files) that deps on all backends
* sane-qcam is only available for x86/x86_64
** other archs does not implement inb/outb (at least in musl)
Now it is possible to use SANE with much less FS space (KB
instead of MB).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
dfu-programmer is a Device Firmware Update based USB programmer for
Atmel chips with a USB bootloader. It's comparable to avrdude, but
optimized for Atmel chips with integrated USB DFU Bootloader.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Some collectd plugins launch third-party plugins that have variation in
initialisation time (like libpcap). Recently (since kernel bump to 4.1)
the DNS plugin has been causing collectd to crash semi-randomly at startup
on MIPS based WNDR3700.
Debugging led to realisation that the DNS plugin seems to require at least
0.1s time to start, before the first data reading attempt starts.
By default, the first data read cycle starts immediately, while apaprently
some of the plugins may still be asyncronously initialising. To make things
safe, this patch adds 1 second delay before the first data read cycle.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The 2015g release of the tz code and data is available. It reflects the
following changes, which were either circulated on the tz mailing list
or are relatively minor technical or administrative changes:
Changes affecting future time stamps
Turkey's 2015 fall-back transition is scheduled for Nov. 8, not
Oct. 25.
(Thanks to Fatih.)
Norfolk moves from +1130 to +1100 on 2015-10-04 at 02:00 local time.
(Thanks to Alexander Krivenyshev.)
Fiji's 2016 fall-back transition is scheduled for January 17, not 24.
(Thanks to Ken Rylander.)
Fort Nelson, British Columbia will not fall back on 2015-11-01. It has
effectively been on MST (-0700) since it advanced its clocks on
2015-03-08.
New zone America/Fort_Nelson. (Thanks to Matt Johnson.)
Changes affecting past time stamps
Norfolk observed DST from 1974-10-27 02:00 to 1975-03-02 02:00.
Changes affecting code
localtime no longer mishandles America/Anchorage after 2037.
(Thanks to Bradley White for reporting the bug.)
On hosts with signed 32-bit time_t, localtime no longer mishandles
Pacific/Fiji after 2038-01-16 14:00 UTC.
The localtime module allows the variables 'timezone', 'daylight',
and 'altzone' to be in common storage shared with other modules,
and declares them in case the system <time.h> does not.
(Problems reported by Kees Dekker.)
On platforms with tm_zone, strftime.c now assumes it is not NULL.
This simplifies the code and is consistent with zdump.c.
(Problem reported by Christos Zoulas.)
Changes affecting documentation
The tzfile man page now documents that transition times denote the
starts (not the ends) of the corresponding time periods.
(Ambiguity reported by Bill Seymour.)
Signed-off-by: Vladimir Ulrich <admin@evl.su>
if a user's env has PERL_MM_OPT defined collect will fail to build. Adding
--with-perl-bindings="" will override this env var.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Buildbots are reporting the following error:
../mme/ARPCPrint.c: In function 'ARPCPrint':
../mme/ARPCPrint.c:123:2: error: incompatible type for argument 3 of 'vfprintf'
vfprintf (fp, (char *)(&data->LIST [LE16TOH (data->STROFFSET)]), (void *)(&data->LIST [LE16TOH (data->ARGOFFSET)]));
^
In file included from /store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/fortify/stdio.h:20:0,
from ../mme/ARPCPrint.c:68:
/store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/stdio.h:108:5: note: expected '__isoc_va_list' but argument is of type 'void *'
Fix this by definition __UCLIBC__ to enable a workaround for this
issue.
While at, switch to HTTPS URL for cloning the git repo.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Changes since oldpackages:
- cups dependency was completely removed
* This also happened in sane trunk version
- small musl patch
- added detection of inb,outb (link error with musl)
* this also removes hack 020-non-i386-qcam.patch
- fix for segfault when using sane-test backend
- removed link to extra libraries in libsane (used only
for preload backends)
- added format-security fix
- sane-libs and sane-backends merged and exploded into
individual packages for each backend:
* libsane for sane library (which backends should dep on)
* sane-daemon for saned daemon
* sane-xxx for sane backend for xxx
** each backend has its own custom dep libraries
* sane-backends-all (with no files) that deps on all backends
* sane-qcam is only available for x86/x86_64
** other archs does not implement inb/outb (at least in musl)
Now it is possible to use SANE with much less FS space (KB
instead of MB).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
This commit updates (and also fixes) the lvm2 package.
The previous Makefile version, was using an incorrect
package version (2.02.126), which does not exists
at the specified FTP source site.
Signed-off-by: Carlos Ferreira <carlosmf.pt@gmail.com>
Monitor adapters (zeroconf, enet, usb and w1) don't have the reset
routine, causing null pointer dereference in BUS_reset function.
This patch has been submitted upstream:
https://sourceforge.net/p/owfs/bugs/67/
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
This fixes the endless loop waiting for w1 subsystem connector status
message.
According to the 8a0427d kernel commit, the last (status) netlink msg
should have ack=seq, whereas all the others messages should have ack=seq+1.
This patch has been submitted upstream: https://sourceforge.net/p/owfs/bugs/66/.
For independent problem report, see this thread:
https://www.raspberrypi.org/forums/viewtopic.php?f=44&t=98772
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Owfs shared library is quite large (700+ kB) by embedded devices standards.
The code for many different bus master and slave devices is compiled
into single big .so library. Had it been designed as modular,
dynamic-loadable plugins, we could split them into separate packages,
allowing user to install only the plugins he needs.
It's however possible to enable or disable libow features at compile time.
Here are some examples how much space can be saved turning off support for
unneeded devices and features:
- By disabling USB adapter support libusb and libusb-compat is no
longer needed, saving ~70kB of space. Bus masters using usbserial.ko
kernel driver don't need this.
- By disabling debug messages it's possible to reduce shared library
size by 130kB.
This patch adds a menu allowing user to select libow features one wants
built in:
- Bus master support: USB adapters through libusb, i2c adapters, kernel w1
adapters
- General features: zeroconf device announcement, debug messages, owtraffic
bus reports
Default config options preserve previous library configuration i.e.
everything is selected except for owtraffic (which was disabled) and
kernel w1 driver (whose netlink interface has been broken since 2011).
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Owfs daemons lack control scripts. This patch adds init.d scripts for owfs,
owserver, owhttpd and owftpd packages.
Most daemon options (both common libow and program-specific parameters)
are reflected as uci config variables.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Also already mentioned in ba4338d6f7,
the security feature FORTIFY_SOURCE could be set globally.
The current approach tries to undefine and redefine it, however,
the order on the command line prevents this from being successfully, e.g.:
arm-openwrt-linux-muslgnueabi-gcc ... -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -D_FORTIFY_SOURCE=1 ...
`---------------v-------------------' `--------v--------'
AM_CFLAGS OpenWrt params
So to have the original source (static) _FORTIFY_SOURCE=2 define,
the only option is to remove it from AM_CFLAGS completely, and
to pass it after the OpenWrt settings explicitely in the Makefile.
This should fix the buildbots finally.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
The config file shipped with collectd dates from 2010 and
leads to error messages if luci-statistics & collectd are installed,
as it references several plugins not usually installed, or such ones
that have been renamed since then.
For most users, this file is just a placeholder during collectd installation,
as /usr/bin/stat-genconfig from /etc/init.d/luci_statistics will overwrite it.
Sanitize and shorten the placeholder config file:
* Reference actively only the default plugins installed by luci statistics.
* Match the placeholder config with the genuine config from luci statistics.
If somebody uses collectd separately from luci statistics, he will need to
edit these settings anyway.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Since openocd depends on hidapi it needs appropriate LD_FLAGS to link
against it as that library depends on libiconv.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Enable the entropy plugin that monitors the available entropy in a Linux system.
Works ok and has no library dependencies. Tested on ar71xx/WNDR3700.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
- build from original tarball
- fix ipv6 support: enable if not completely disabled
- drop useless LSOF_INCLUDE override
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
Update collectd, base of Luci statistics, to 5.5.0.
Patches have been refreshed.
write-graphite plugin is now enabled. (see #1351)
I have compile-tested all plugins with ar71xx,
and real-life tested the following plugins:
Conntrack, Processor (CPU), DNS, Interfaces, Wireless, System Load,
Memory, Ping, Uptime
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
pps-tools builds on kernel 4.1, but instead of adding this kernel,
remove the check as all kernel versions currently supported by OpenWrt
are listed.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The configure script shipped by screen uses the presence of `elf.h` and `-lelf`
as indicator for an SVR4 system which implies a `#define BUGGYGETLOGIN`.
The SVR4 `getlogin()` replacement function does not compile with a musl
toolchain and we do not want it anyway, so patch configure to remove the broken
SVR4 detection logic.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
- Include `poll.h` at the top of `ether/readpacket.c` to avoid nested
declaration errors caused by fortify source headers
- Add missing `sys/select.h` include to `serial/serial.c`
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
- license and maintainer added
- bumped to recent release source tarball instead of SVN source
- add archive.org mirror to work-around the lm-sensors.org domain
currently being broken...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
