LVM2 uses libselinux if found at buildtime and then requires it to
be present on run-time.
As LVM2 is usually not installed on space-constraint systems just
always build with libselinux as apart from the extra space usage it
doesn't hurt.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This was caused by upstream project commit db5adeaa ("build-sys: clean
up flags included in the linker command line")
Reported-by: W. Michael Petullo <mike@flyn.org>
Link: https://github.com/openwrt/packages/issues/13081
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.
Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.
Signed-off-by: Paul Spooren <mail@aparcar.org>
If ttyd is configured to ssl, you will get the following message in the
log `refuse to serve WS client for illegal ws path`. Upstream a patch
has already been applied which fixes this.
Since there is no newer version than 1.6.1, this fix is backported as a
patch. And could be removed if a new version of ttyd is available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
GCC10 defaults to -fno-common , which breaks compilation as there are
multiple variables defined outside of the header file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Append missing debug option value.
If this is not append and the debug option is selected, then we get the
following error output on ttyd start.
> ttyd: missing start command
To fix this add missing debug option value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Added the mount utilities. It turns out that udev is not a requirement.
Renamed package to fuse3 and moved to utils, as with fuse2.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit adds two additional init.d targets:
* uciadd:
This command adds the default docker0 bridge to the network
configuration. Additional, a new firewall zone docker is created
* ucidel
This command removes default docker0 bridge from the network
configuration. The new docker firewall zone gets also deleted.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Removed multibyte options. They must now be enabled.
Refreshed patches.
Commented out autowrite as requested in
https://github.com/openwrt/packages/pull/12177
Signed-off-by: Rosen Penev <rosenp@gmail.com>
API change.
Cleaned up Makefile.
Fixed license information.
Remove pointless CMAKE_INSTALL. This is not needed in InstallDev.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If the uci configuration is changed send dockerd a SIGHUP to reload the
generated daemon.json file with the new configuration.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Extract data from configuration file /etc/config/dhcp and create labels
{name, ip, mac, dns} via uci. Those labels are useful in order to craft
complex prometheus queries as replacing the MAC address to a custom
name. E.g.: wifi_station_signal_dbm * on (mac) group_left(name)
uci_dhcp_host or on (mac) label_replace(wifi_station_signal_dbm, "name",
"$1", "mac", "(.+)")
Signed-off-by: Gérondal Thibault <contact@tycale.be>
Added patches to fix meson compilation.
Reworked flashrom.mk to work with meson.
Several minor Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
A bit ugly but it works.
Added PKG_BUILD_PARALLEL for faster compilation.
Fix license information.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This adds a new Makefile variable, GO_PKG_TAGS, for Go packages. When
set, the value is passed as the parameter of the -tags option for 'go
install'.
This also updates syncthing to use this variable.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
I've noticed that in deployment on some reboots it won't configure,
This seems to be due to running before the system/network is ready.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
Until now, the firewall rules from the dockerd were preserved after the
service was stopped. This is not nice. With this change the firewall rules
created by dockerd will be deleted when the dockerd service is stopped.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Upstream backport.
Adjusted package to use PKG_INSTALL for consistency between packages.
Added PKG_BUILD_PARALLEL for faster compilation.
Adjusted InstallDev section to install the pkgconf file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
default inotify limits at 8k are
low for serious usage
and the GUI shows errors like
"Failed to start filesystem watcher
for folder XXXX"
increase them with this config file
as instructed by syncthing's FAQ.
https://docs.syncthing.net/users/
faq.html#inotify-limits
Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
[bumped PKG_RELEASE]
Signed-off-by: Paul Spooren <mail@aparcar.org>
Allows simplifying the Makefile. Faster compilation as well.
Revert b70cb0ef5e
That commit was misleading and ended up bloating the Utilities section.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
As simple package, providing a utility ("br") for controlling X10
home automation Firecracker transmitters over serial.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
About the patch: Gnuplot build process includes the compilation of some
custom binaries which are subsequently used to generate help files/docs.
Since those binaries are compiled for TARGET, this breaks the build on
the HOST. The patch disables the generation of those binaries (and the
documentation).
Signed-off-by: Matteo Cicuttin <datafl4sh@toxicnet.eu>
Setting the GO_PKG_LDFLAGS_X after including golang-package does not
include them anymore after commit 25a7f00. By adding flags before they
are correctly loaded and included in `syncthing` binary.
Signed-off-by: Paul Spooren <mail@aparcar.org>
DAWN is a decentralized WiFi Controller.
https://github.com/berlin-open-wireless-lab/DAWN
The node exporter allows to gather statistics about your network:
- Infos about AP (Channel Utilization, Station Count, ...)
- Connected Clients (Signal, Capabilities)
Signed-off-by: Nick Hainke <vincent@systemli.org>
Fix license information.
Add URL.
Add HOST_BUILD_PARALLEL for faster compilation.
Add PKG_HOST_ONLY to signify that this is to be used as a host package
only.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://kb.vmware.com/s/article/60262
Add new package to support Shared Folders user mode FUSE client.
Signed-off-by: Xingwang Liao <kuoruan@gmail.com>
Currently the init script generates a config file from uci, that has the
include line before the interval line. This means, that anything happening
in the include directory does not yet see the changed Interval.
Moving the include line before the uci generation process fix this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Currently the values are stored in the ubi plugin as data source type
`counter`. But this makes no sense, because the values change very slowly
and I don't want to know the rate of change. It is better to store the
value as data source type `gauge`. Then I can see the current value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Since size is not a problem here, use libxcrypt to avoid algorithm
availability. Changed default to bcrypt as that's the strongest
supported by shadow-utils.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
ALTERNATIVES shall be defined in the package where /sbin/kmod resides --
otherwise kmod tools will break if we install only the library as these
tools will be linked to a nonexistent executable.
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
Irqbalance defines /run/irqbalance dir for its socket
communication between irqbalance and its UI. /run does not exist
in OpenWrt (although it is defined by the Linux FHS), so the
socket creation fails. Although we do not compile UI and thus
the issue is not critical to us, fix the directory location.
Additionally, the creation is originally handled by a systemd
init script that we do not use.
* patch source to define dir as /var/run/irqbalance
* create the dir in the procd init script.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
If musl has no bcrypt:
passwd: failed to crypt password with salt '$2a$13$w8EJ0Yfz5bGsG4U/0m7bk/': Function not implemented
The password for root is unchanged.
glibc output as it has no bcrypt:
passwd: failed to crypt password with salt '$2a$13$xbpmAYmq6Q/rZN5jOlNxJZ': Invalid argument
The password for root is unchanged.
--without-bcrypt output:
Invalid ENCRYPT_METHOD value: 'BCRYPT'.
Defaulting to DES.
passwd: password changed.
The solution was tested on glibc despite using a musl specific variable
Still works.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Even though I think that mysql_upgrade is a client package (it depends
on the mysql client and it's in the "client" directory in the source
tree, for instance), upstream laid it out differently. Since upstream
commit ec586f5 mysql_upgrade is to be considered a part of the server,
because the COMPONENT argument in the MYSQL_ADD_EXECUTABLE macro is set
to "Server".
That means that mysql_upgrade is only installed when the server is. So
we need to move it back to the server package, otherwise we will have a
build failure when mariadb-client is selected while mariadb-server is
not. This particular build failure was recently a topic on
openwrt-devel.
Some more binaries are moved, following the layout visible in
"man/CMakeLists.txt", to make sure we follow upstream's vision with
regards to how the binaries are packaged.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Also add coreutils-sleep and coreutils-date as dependencies (Flent needs
these for the scripts-based remote data gathering tools).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Domoticz doesn't use libmosquittopp any more as it was deprecated. It
has its own copy. It can also use the system libjsoncpp, so do that too.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This release removes iconv dependency which needed nls.mk before.
It also removes the library component.
Switch from old name to new name in Makefile.
Fixed license information.
Several other cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
add hwinfo package, it is a complete
system hardware detection tool,
similar to lshw but is written in C
and has minimal dependencies.
It is part of core SUSE Linux
applications like Yast installer
and system configurator tool so
it's regularly maintained.
Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
init script would error:
procd: /etc/rc.d/S99acpid: /etc/rc.common: /etc/rc.d/S99acpid: line 18: procd_send_signal: not found
procd: /etc/rc.d/S99acpid: /etc/rc.common: /etc/rc.d/S99acpid: line 19: syntax error: unexpected "}"
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
The current version fails to build on mips and also on mipsel, but the
the latter is not masked.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Reworked Makefile for consistency between packages.
Removed librt dependency. clock_gettime does not need it anymore.
Updated URL.
Add MAP_SYNC workaround as musl undefines MAP_SYNC for MIPS and PPC.
Refreshed patches and removed upstream ones
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Marijan Svalina <marijan.svalina@sartura.hr>
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
The variable is a list of shell variables; the new name is more in-line
with other parts the build system (CONFIGURE_VARS, MAKE_VARS, etc.).
GoPackage/Environment is kept (for now) in case other feeds are using
it.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
mysqld_safe is the recommended way to start the server on non-systemd
systems ([1]). For instance, it has a crash detection with auto-restart
function, can update ulimits, setup core files, set the niceness of the
server etc. It looks like it could also be helpful when trying to set up
clusters. It's maintained upstream and adding it means we don't need to
add these features into our init script.
mysqld_safe is a script itself, so it's added to conffiles in case users
want to edit it.
It can't be run under procd, so the init script is converted to a normal
System V type. To stop the server and to reload the privileges tables
mysqladmin is used. To that end mysqladmin is moved into the server
package.
While changing the init script, the Debian init script was used for
ideas. It wasn't copied verbatim and adapted a bit here and there.
Thanks to whoever wrote it!
This commit removes the support for starting the service as a user other
than "mariadb". This makes the init script simpler. If anybody wants to
play around with the user then it's up to them to fix the permissions.
[1] https://mariadb.com/kb/en/mysqld_safe/
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
It's really a client. It connects to the running server as a client, to
upgrade the DBs. And it depends on both mysql and mysqlcheck.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
With INSTALL_PAMDIR undefined some items necessary for the auth_pam
module aren't built. This adds the define so that configuration and
shared object become available.
This commit also tightens up the installation of the SUID tool. The
directory it is copied into gets created on the build host already with
u=rwx,g=rx,o=, so it cannot be accessed on target, except by root. The
post-install script then changes group ownership of the directory to the
"mariadb" group only if the directory is really a directory and owned by
"root:root".
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Until now $(INSTALL_CONF) is used for configuration files that go into
/etc/mysql. This commit replaces that with $(INSTALL_DATA). The
configuration files are not only parsed by the server, but also by the
clients (which can be anybody).
This also removes a comment about a cron job from one of the
configuration files. There is no cron job.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The slirp patch was included in this QEMU release
CXX_DEPENDS is now added for all host components otherwise we get
errors like the following
Package qemu-img is missing dependencies for the following libraries:
libuClibc++.so.0
Package qemu-nbd is missing dependencies for the following libraries:
libuClibc++.so.0
--disable-bluez was removed from configure args because upstream
deprecated bluetooth subsystem since qemu v3.1 and remove the code in
commit 1d4ffe8dc77c ("Remove the core bluetooth code")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
This adds a line in Build/InstallDev to change a hardcoded
'/usr/include' definition in the staging_dir libopenzwave.pc file to use
${prefix}/include instead. Otherwise dependent packages may fail to
find them.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
This package is based on dump1090-fa with many modifications. A big
advantage over dump1090-fa is that it can connect to multiple services
like adsbexchange, piaware or fr24feed.
As the idea for this package is mostly to feed other services, the HTML
files to serve via a webserver have not been included. The service(s)
that will be fed by readsb can offer such a webpage instead.
Finally, the init script does not use local variables, as local is
undefined in POSIX.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Increase the range of characters that get substituted by '_' so the
shell doesn't complain about illegal variable names.
Primarily done to catch '.' and '-' but who knows what funnies will
appear in i/f names.
It's a shame that busybox ash doesn't understand :alnum:
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
If we execute `docker info` we get the following warning:
WARNING: bridge-nf-call-iptables is disabled
WARNING: bridge-nf-call-ip6tables is disabled
To fix this enable this in sysctl if docker is installed.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Add a script that can collect data from mq (multi queue) and cake
qdiscs.
Script is reliant on collectd's 'exec' module.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
The y-axis graph labels in logarithmic mode display in 'scientific'
notation eg: '1e+00' for 0, '1e+01' for 10, '1e+02' for 100 and so on.
This IMO is a pain in the backside for non scientific humans to read.
Modified output to display numbers up to 99,999 in conventional decimal
format and to revert to scientific notation for larger, thus the same
display space is taken.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
The official node_exporter reports node_time_seconds as a gauge, but
prometheus-node-exporter-lua reports it as a counter. To be consistent
with the official implementation, and because "gauge" is more correct
than "counter" for this metric (system time can decrease, but the
Prometheus documentation states, "A counter is a cumulative metric that
represents a single monotonically increasing counter whose value can
only increase or be reset to zero on restart."), change the type for
node_time_seconds to "gauge".
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
The package Makefile contains an unnecessary PKG_BUILD_DEPENDS
line that builds gettext and libiconv even in cases where the
build has gettext-full and libiconv-full selected.
This behaviour can and does mask errors in other package Makefiles
that are dependent on libiconv-full if it is compiled before
these packages by causing libiconv-stub to be created and put in
the staging tree and potentially linked against by these
dependent packages when they omit to specify an appropriate
PKG_BUILD_DEPENDS line.
procps-ng does not require gettext or libiconv to be built in
order to compile correctly.
Signed-off-by: Ian Cooper <iancooper@hotmail.com>
This enables a system-wide .bashrc file (/etc/bash.bashrc), as well as
some other options related to startup files, and sources /etc/shinit for
interactive shells.
Fixes https://bugs.openwrt.org/index.php?do=details&task_id=3019.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
The package Makefile was not taking into consideration that the build
may be using BUILD_NLS with libintl-full and libiconv-full and was
trying to link the wrong versions of these libraries in this case.
The necessary flags are added by nls.mk to TARGET_LDFLAGS and can be
passed to irqbalance's configure script for setting the GLIB2_LIBS
variable instead of the explicit static link to the libiconv stub.
The PKG_BUILD_DEPENDS line should be modified so as to add to and not
override the definition set by nls.mk, which will ensure the right
version of libiconv and libintl is built beforehand.
A DEPENDS:= line should be added to the package definition using the
variables defined in nls.mk, which will add the appropriate version
of libintl and libiconv (vanilla or -full versions)
If USE_GLIBC is true, then libpthread needs to be explicitly passed
to the configure script in the GLIB2_LIBS variable for linking.
Signed-off-by: Ian Cooper <iancooper@hotmail.com>
The former can be implemented as a meson argument.
The latter is already default.
No compiled difference, therefore no PKG_RELEASE bump.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
ntfs-3g does not include nor install a file like this.
Cleaned up Makefile for consistency between packages.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
So far, all output created by scripts run with micrond has been
discarded. Since there is no reason for that and it also does not
match the expected behavior, this enables both stdout and stderr
output for the service.
If not desired, a user can still use >/dev/null or similar in his/her
micrond jobs to disable output easily and similar to what it would be
on other systems.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This package can not be installed if you have installed less from
busybox.
Collected errors:
* check_data_file_clashes: Package less wants to install file /bin/less
But that file is already provided by package * busybox
* opkg_install_cmd: Cannot install package less.
To avoid this error, I moved it from /bin/less to /usr/bin/less.
If you install it now, it changes symlink from busybox to /usr/bin/less
/bin/less -> busybox*
/bin/less -> /usr/bin/less*
When you remove it, it changes symlink back to busybox.
That's why postint and postrm scripts are no longer needed.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
This removes Python-related build variants, and adds
PYTHON3_PKG_BUILD:=0 and minor build adjustments (where appropriate),
for non-Python packages. There should be no changes to build output.
This also updates some include paths for python3-package.mk and/or
python3-host.mk to be relative to the package Makefile.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
All patches are not needed anymore. squashfs-tools has implemented them in
one way or another.
Converted to download release tarballs. This should work better to get
notified of a newer release.
Also adds support for ZSTD compression:
https://facebook.github.io/zstd/
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Add new PCI and USB drivers to flashrom.mk to disable them in other
build variant.s
Fix DefineConfig calls to use new config symbols, and have it only
append NEED_FEATURE=yes to MAKE_FLAGS. Appending NEED_FEATURE=no would
still enable the feature because upstream compares against an empty
string instead of comparing to yes.
Drop libusb-compat dependency as all drivers use libusb-1 now.
Remove upstreamed patch 010-add-arc.patch.
Rework 0001-fix_internal_bitbang.patch, give it a correct prefix and
more descriptive name.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
libwrap is fairly useless. It's also legacy and should not be used/
dbus is a big dependency. It's fairly useless in the OpenWrt context.
I don't know how useful netlink is.
Disabling BSD behavior results in a slightly smaller size.
Disable LDAP. No size difference but I have a feeling it pulls in
another dependency...
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Remove "prompt" command, dropped in kconfig-v5.6, from
Package/sane-backends/config, replacing it with "tristate". This does
not affect the generated package.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Update nano editor to version 4.9.1
2020.03.31 - GNU nano 4.9.1 "Sapperdeflap"
Two bugs introduced in version 4.9 are fixed: the cursor
getting misplaced when undoing line cuts, and filtering
of the whole buffer to a new buffer not working.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit 97dbc515e5.
libgd has been been fixed to provide correct pkgconfig info,
so that nut again compiles in buildbot. Thus the nut plugin
can be re-enabled in collectd.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Disable nut plugin for now, as nut is currently
failing to build in buildbot (maybe due to libgd),
and the nut plugin prevents compiling collectd itself.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This version of yunbridge will cease to function once Python 2 is
removed from the feed. It does not appear[1] that upstream will be
updated with a version that uses Python 3.
This package will be added to the abandoned packages feed.
[1]: https://github.com/arduino/YunBridge/issues/31
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Add fallback zero value definition for MAP_SYNC etc. even when building
for CONFIG_LINUX.
Fixesopenwrt/packages#11067
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
It's causing issues with newer glib2:
../libgammu/libGammu.so.8.1.41.0: undefined reference to `libiconv'
../libgammu/libGammu.so.8.1.41.0: undefined reference to `libiconv_open'
../libgammu/libGammu.so.8.1.41.0: undefined reference to `libiconv_close'
It's because the libiconv-stub does not include a shared library that
gammu can link to.
Removed most patches since they don't seem to be needed.
Ran init script through shellcheck.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Run the service under an unprivileged
user account
The following parameters are now configurable
niceness
max concurrency (defaults to number of CPUs)
user
Added flags "-no-browser"
Disabled in-place upgrades (disabled in the
build already)
Redirected stderr/stdout to syslog
Added support for "reload_config"
Increased "term_timeout" to 15s to give it
plenty of time to shut down gracefully
Properly handled non-existing directories
Removed a softlink that assumes a specific naming
convention in syncthing
Added a comment that using external storage is a
recommend configration
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
[increased package release]
Signed-off-by: Paul Spooren <mail@aparcar.org>
Since upstream commit dc92994 the LDFLAGS used for settings the version
(and build host and user) changed resulting in "unknown" versions in
syncthing.
Correct version detection is important for syncthing to assure
compatibility with other running instances. The "unknown" version fails
to communicate and sync with correctly compiled instances.
This patch updates the syncthing Makefile to inject the correct
variables and thereby fixes the version detection in syncthing.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Drop upstreamed patches.
The file appversion.default was removed from Domoticz, causing the hacks
to inject APPVERSION, APPDATE and APPHASH to fail. As the appversion.h
is generated during compile time, implementing a new way to inject these
defines is non-trivial, so simply drop them.
As the minor version for this release is no longer based on the number
of commits, the package versioning needs to be revised if we want to
build a git snapshot instead of stable release. Leave this for another
day and drop that logic for now.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Explicitly disable the new dpdk_telemetry module to fix
compilation in buildbot.
(other dpdk modules are aleady disabled)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Life changes, I'm no longer avaiable to be an sufficiently active
OpenWrt developer. Therefore removing myself from maintainer from
all packages I maintained in OpenWrt.
All the best for those who keep up the good work!
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
iptables 1.8.4 drops support for a combined libiptc, providing split
libip4tc & libip6tc instead. Adjust collectd dependencies in advance of
iptables bump from 1.8.3 to 1.8.4
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
This is intended as a match with standard urngd. They serve same purpose
and urngd starts as first with 00. Starting haveged later can create
issues if you replace urngd with it. The example problem is if
uci-defaults script decides to generate certificate. Haveged can supply
entropy but it is started later and to mitigate this urngd would still
have to be installed. This means that haveget can't serve as replacement
without moving it to match start order of urngd.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
If libacl is built, gnu sed finds it during configuration and enables support
linking in libacl. This results in build failures due to the missing dependency.
Consequently, use CONFIGURE_ARGS to disable acl support.
Reported-by: Rosen Penev rosenp@gmail.com
Signed-off-by: Russell Senior <russell@personaltelco.net>
The previous implementation always succeeded so no scan was performed.
This now fixes that and it correctly scans for BTRFS devices if BTRFS
support is in kernel.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
The original patch[1] this package was based on has been merged into
OpenWrt master, making this package unnecessary.
[1]: https://patchwork.ozlabs.org/patch/1094493/
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Add PKG_BUILD_PARALLEL for faster compilation.
Replace ' ' with TAB for consistency between packages.
Refresh patches and remove outdated ones.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Use PKG_INSTALL for consistency between packages.
Add PKG_BUILD_PARALLEL for faster compilation.
Fix wrong locking path. First discovered here:
https://forum.openwrt.org/t/cannot-setup-dm-crypt/56836
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added support for reload_config
This service does not need to start so early (even
before the netwrok is up). Start it after
the device is mostly up and operational.
Compile-tested on: ipq806x
Runtime-tested on: ipq806x
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Added the ability to enable/disable via a config file;
the default is enabled for backwards compatibility.
This is an additional service, so running it the
same priority as dnsmasq, etc does not make sense.
Added USE_PROCD=1
"done" starts at "START=95", so this should start earlier
Added STOP=10 to stop syncthing early
Compile-tested on: ipq806x, ipq40xx
Runtime-tested on: ipq806x, ipq40xx
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Added the ability to change sampling interval
and provide a list of IRQ's to ignore
via /etc/config/irqbalance
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Upgraded from 1.2.0 to 1.6.0 to pick up
all the latest fixes and improvements
irqbalance made glib2 mandatory since 1.3.0, but is
using very little of it. glib2 linked statically
to minimize the impact.
1.2.0 size: 33,619
1.6.0 size: 99,539
~# irqbalance --version
irqbalance version 1.6.0
~# ldd /usr/sbin/irqbalance
/lib/ld-musl-armhf.so.1 (0xb6f5f000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6f43000)
libc.so => /lib/ld-musl-armhf.so.1 (0xb6f5f000)
~# opkg info irqbalance
Package: irqbalance
Version: 1.6.0-6
Depends: libc
Status: install user installed
Architecture: arm_cortex-a7_neon-vfpv4
Installed-Time: 1582839249
Compile-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Run-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Currently it only cleans up binaries when executing
Build/InstallDev without deleting .built stamp file.
This leads to wrong information about existence of
built runc binaries and causes error when executing
package/containerd/install twice.
Signed-off-by: Texot Qi <tete1030@gmail.com>
Currently it only cleans up binaries when executing
Build/InstallDev without deleting .built stamp file.
This leads to wrong information about existence of
built runc binaries and causes error when executing
package/runc/install twice.
Signed-off-by: Texot Qi <tete1030@gmail.com>
Infozip (earlier name "zip") has 12 year old source code that
would require work to make the binary actually work.
> root@router1:/# zip
> zip error: Not supported (uzoff_t not same size as zoff_t)
The package was rename from zip to infozip a few weeks ago
due to buildbot's relutance to compile zip in master and 19.07
ever since host zip was added as a build tool.
Reference to #10985 and #11089 as well as
ad8c2d6099
But as the binary does not work, lets remove the package to
avoid confusion for the end-users.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Convert bigclown packages to use pypi.mk and pypi in general instead of
github.
This allows us to remove version replacement as that is already done in
pypi archive.
Updated dependencies to also contain proxy dependencies that are listed
in upstream.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
Fix compilation error due to multiple definition
x86_64-openwrt-linux-musl/bin/ld: lib/libcoreutils.a(strtold.o):(.data+0x0):
multiple definition of `minus_zero'; lib/libcoreutils.a(strtod.o):(.data+0x0):
first defined here
collect2: error: ld returned 1 exit status
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Since the brcm2708 target has been renamed to bcm27xx in openwrt
repo, update the dependency to the target in this package.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Removed CMAKE_INSTALL as there's no need for InstallDev.
Added PKG_BUILD_PARALLEL for faster compilation.
Small cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Move more environment variables into GoPackage/Environment
* Split GoPackage/Environment into target and build sections
* Do not set GOROOT_FINAL for Go packages (setting it should only affect
the Go compiler and not Go packages)
* Set CGO_LDFLAGS to $(TARGET_LDFLAGS)
* Move GO_TARGET_* variables from golang-values.mk, and GO_VERSION_*
variables from golang-version.mk, into golang/Makefile
This also updates runc, containerd, and docker-ce to reflect the changes
in GoPackage/Environment.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Today CVE-2020-7221 was publicly discussed on oss-sec [1]. MariaDB
upstream had not mentioned this CVE in their last release notes. The CVE
is related to auth-pam and the possibility of a local mariadb to root
user exploit in the mysql_install_db script.
Upstream has made amendments to the script, but according to the oss-sec
posts the folder permissions were not updated as they should have been.
In OpenWrt the script mysql_install_db is actually patched to never run
the commands in question. This has been this way since MariaDB 10.4 was
made available.
Still, the directory permissions set by the postinstall script are too
lax. To quote the discoverer of the issue, Matthias Gerstner from Suse,
they exhibit "the dangerous situation of a setuid-root binary residing
in a directory owned by an unprivileged user".
This commit fixes this by changing the permissions to the following:
root:mariadb 0750 /usr/lib/mariadb/plugin/auth_pam_tool_dir
This way the setuid-root binary is only available to root and the
mariadb user, while at the same time the mariadb user has no ownership
of the directory.
[1] https://seclists.org/oss-sec/2020/q1/55
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This exporter exposes information of the connected stations acquired
from hostapd. These contain additional information compared to the
existing station exporter, however they require a full build of hostapd
/ wpad.
Signed-off-by: David Bauer <mail@david-bauer.net>
- Migrate libusb dependency back to libsane
(virtually all useful backends for OpenWrt would need it anyway)
- Disabled new usb-record-replay feature (avoid libxml2 dep)
- Disabled new escl backend (network-only backend are not too useful
for OpenWrt and it requires libcurl, libnetsnmp, libavahi and libxml2)
- Workaround sane-daemon/postinst installation on Imagebuild
- Enabled backends kvs40xx and mustek_usb2 (fixed upstream)
- Fix bigendian compilation
(https://gitlab.com/sane-project/backends/-/merge_requests/329)
- Fix missing std::round() for uclibc
(https://gitlab.com/sane-project/backends/issues/237)
- Fixes FS#2685: coldplug was running before usblp was loaded. Now
it grants access do usblp when a device using it is plugged.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Fixed license information.
Removed patch requiring autoreconf and replaced with a configure variable.
Removed faulty patch that broke systems without a disabled crypt size hack.
Replaced with using a SED command as well as bcrypt, which works in musl.
Removed su patch and converted it to a SED command in the Makefile.
Added new shadow utilities.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rename "zip" to "infozip" to avoid name collision, as the same
zip package has been introduces to the build tools as zip.
Buildbot does not like that.
Reference to #10985 and #11089 as well as
ad8c2d6099
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This happens during compilation:
Enabling network
./etc/init.d/prometheus-node-exporter-lua: line 7: /lib/functions/network.sh: No such file or directory
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This is conflicting with tools/zip where the HostBuild is specified.
This should allow the zip package to show up.
Several cleanups were also performed for consistency between packages.
Added PKG_BUILD_PARALLEL:=1 for faster compilation.
Remove PKG_CHECK_FORMAT_SECURITY. Patched the issue instead.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Latest fft-eval has some extra features such as ath11k support, double precision in json signal calculation, and cleanups (batctl references, minor bugfixes, etc )
This commit is a version and makefile update. Now the native project Makefile do the job (compilation and linking).
Signed-off-by: Kirill Lukonin <klukonin@gmail.com>
New patches (both for SConstruct):
* Do not import from distutils. Since Python support/modules are not
built, there is no need to import from distutils. (Importing from
distutils may prevent the package from being built on systems without
a full distutils module, e.g. Debian with python3-minimal.)
I have added back the import in places where it may be helpful to
have, if scons is run manually.
Fixes#10993.
* Do not check the size of time_t. The way this is done is to compile
and run a test program; this fails when cross-compiling[1].
This doesn't appear to affect any functionality (other than missing a
compile-time warning that things will fail in 2038 if time_t is too
small).
[1]: https://gitlab.com/gpsd/gpsd/issues/48
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
DEPENDS attribute makes canutils fail on installation procedure
Removing it makes a successful build
Signed-off-by: Paulo Machado <pffmachado@yahoo.com>
The regular Makefile is totally broken and does not pass CFLAGS. This
breaks compilation with PKG_ASLR_PIE and also does not pass -Os.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The last OpenOCD release was 3 years ago, plenty of new functionality
was added since then. Two security-related patches went in too.
While at it, add a menuconfig option to allow building without any USB
dependencies, useful for devices counting on sysfsgpio to access
targets.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Fix the dependency declaration by removing the unnecessary/illegal
commas:
> WARNING: Makefile 'package/feeds/packages/smartmontools/Makefile' has a dependency on 'smartd,', which does not exist
> WARNING: Makefile 'package/feeds/packages/smartmontools/Makefile' has a dependency on 'nail,', which does not exist
> tmp/.config-package.in:153368:warning: ignoring unsupported character ','
> tmp/.config-package.in:153373:warning: ignoring unsupported character ','
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Updated URL list. Changed to HTTPS also.
Added PKG_BUILD_PARALLEL for faster compilation.
Added PKG_INSTALL as is standard with most packages.
Small optimization to shell script.
Added two patches to fix compilation. Refreshed the other one.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Fix PKG_LICENSE
Switch to standard PKG_INSTALL to simplify the Makefile.
Add PKG_BUILD_PARALLEL for faster compilation.
Add URL.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
A separate package which depdens on msmtp and nail is introduced.
Once more packages provide `sendmail` and `mail` interfaces, this
dependency can be made more flexible.
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
saned requires write access scanner USB bus for its process and
to usblp/bind in order to rebind multifunctional printers back
to usblp (for printing with p910nd).
A hotplug script monitor new USB devices for scanners. Scanners
are detected by searching /usr/share/sane/<vendor>-<backend>.usbid
for the device product_id.
The package saned creates user saned:scanners. Access is granted to
group scanners.
The default xinetd conf was updated to run as saned:scanner.
sane-daemon pkg now has a postinst trigger that runs udevtrigger for
granting perms where there are connected scanners during installation.
Existing hotplug scripts from hplip were removed. They were mostly
useless.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
cxxabi.h is a useless header that libcxx does not include.
Remove indent on postint script. It should be on the same as the above
section.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Busybox in default uses SHA512 as well.
On big ditribution this default is sourced from PAM. That means that
shadow reads pam settings and uses that. OpenWrt in most cases does not
have PAM installed and in such case shadow fallbacks to its own default
which is DES. This just changes that default to SHA512 which is
consistent with rest of the system.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
The postrm script was missing shebang. Postrm scripts are packaged and
executed directly and not sourced by default script (as in case of prerm
and postinst).
Also move some indents around to not confuse reader. The section in
postinst was indented to same level as grep "condition" but is on same
level as initial grep (not part of that "condition").
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
usbmuxd must be ran for many of the idevice tools. Added an init
script to make this easier.
Added myself as maintainer.
Fix PKG_CVE_ID.
Added config directory.
Placed in a submenu for easier readability.
Add extra tool
Signed-off-by: Rosen Penev <rosenp@gmail.com>
018f57e713fa cmake: bump version to 1.0.1
b90c65be87c5 ubus: add state method
034e3a77680d scene: add dumping of state to blobmsg
d21b0946e6f6 scene: add all LEDs during scene creation
f31a6f2b8c3b led: add dumping of state to blobmsg
cead0f7f54f6 add support for scenes with priorities
8637a86307d7 led: remove string format from led_state_str
0eaa67a5a687 led: add led_from_path
8243708905aa tests: add basic blob-led unit test
99bcdaa306f7 refactor blob LED parsing into separate unit
210c5e3c5128 led: change sysfs LED path for unit tests
310a676e50d7 add cram based unit tests
eb7acbb08e36 led: led_add: add debug output
ca9c762fb29a led: make timer tick interval variable
44d072039680 led: allow running and stopping
df0c7772c9c6 timer: add missing includes
2aab48d1143c cmake: add sources into static library
83d4189606ca fix multiple timer drifts by using singular timer for all LEDs
3abe097ebecf log: output function name in debug log messages
5c768b337df8 led: set current brightness only after success
cf93720951bc allow overriding of default ubus socket path
b642b650a612 led: fix initial LED fading out
ba00ca0e886c fix deprecated SPDX license identifier
766448f68e69 convert content of README into Markdown format
079e773e3250 rename README into README.md
76eb126d9eb5 add LICENSE file
7a006926c442 add initial GitLab CI support
cc94cd4c59b0 replace stderr based logging with ulog
7aa9c35a9581 add basic application versioning
ecd26be4c5dd add basic logging
cc42a9c79ad9 factor out ubus stuff into separate unit
13a589678c29 factor out led stuff into separate unit
7763972de980 fix sign issue spotted by compiler
aef09580c960 cmake: enable extra compiler warnings
97663b4e1d15 cmake: fix include dirs and libs lookup
875a9e15b10a fixes a small bug that failed to reset the state to LED_SET when reconfiguring a LED
Signed-off-by: Petr Štetiar <ynezz@true.cz>
"This program is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License version 2.1"
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Since we have to restart dnsmasq to reload the config anyway, this
package doesn't need to run before anything. We do however need to
wait for the network so I've changed this service to be a hotplug
script and utility script.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
The intended behavior is to has the buildbot select all the applets
as well as packages only selecting what they need. This should do it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
As some ipq40xx CPUs support frequency scaling, enable building
collectd-mod-cpufreq for ipq40xx (for private builds) and
its package architecture brcm2708_bcm2709 (for buildbot)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
MariaDB 10.4 includes some changes in sql/sql_statistics.cc that require
std::fmin and std::fmax. But these functions aren't available when
libstdc++ is compiled against uClibc, because uClibc doesn't pass the
test when libstdc++ checks for C99 math that supports "TR1" facilities
(macro: GLIBCXX_CHECK_C99_TR1).
Hence compilation fails:
[ 90%] Building CXX object sql/CMakeFiles/sql.dir/sql_table.cc.o
/builder/shared-workdir/build/sdk/build_dir/target-arc_archs_uClibc/mariadb-10.4.10/sql/sql_statistics.cc: In member function 'void Column_statistics_collected::finish(ha_rows, double)':
/builder/shared-workdir/build/sdk/build_dir/target-arc_archs_uClibc/mariadb-10.4.10/sql/sql_statistics.cc:2533:20: error: 'fmax' is not a member of 'std'
val = std::fmax(estimate_total_distincts * (rows - nulls) / rows, 1.0);
This commit updates package dependencies to prevent a build against
uClibc. There is no reason to waste CPU cycles on the build bots.
The dependencies are also tidied up. In the past it made sense to define
MARIADB_COMMON_DEPENDS and MARIADB_COMMON_DEPENDS_EXE, because the
server had different dependencies compared to the library. But since the
library is now in its own package we can remove the differentiation.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
CMake is faster and allows to simplify the Makefile slightly. It also
creates a slightly smaller package for some reason.
Fixed license information.
Ran postinst through shellcheck. It was using bashisms.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Drop the config knob 'listen_address' and introduce 'listen_interface'
and 'listen_ipv6' instead.
'listen_interface' takes an openwrt interface name ('loopback', 'lan',
'wan' etc, or "*" for all), from which the primary IP is used to listen
on. If 'listen_ipv6' is set to '1', the IPv6 adress will be used, IPv4
elsewise.
procd interface triggers are now combined with this, so if the listen
interface is not yet configured when the init script is executed, the
process start is defered, and the trigger takes care of that once
the interface is ready.
Fixes#7670
Signed-off-by: Andre Heider <a.heider@gmail.com>
This adds a few lines to the BuildPlugin routine to install some missing
files for auth_pam as well as ha_spider.
It also adds a postinstall script that updates the ownership of a
directory used by auth_pam.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This way when only wanting the library nobody needs to download and
compile the server package, saving space and time. Also this way we can
avoid sudden SONAME bumps during a server upgrade.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This moves mariadb-common into its own (tiny) package in preparation for
moving out libmariadb as well. Otherwise the library would have a
dependency on the big mariadb package.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Highlights:
- Bump from 10.2.26 to 10.4.10
- auth_pam got replaced with never version, old one still available as
auth_pam_v1
- semisync plugins were merged into the core
- Upstream now installs symlinks for binaries with mariadb prefix. To
accommodate that this commit updates Package/mariadb/install/bin
accordingly.
- Patches are updated with new ones from Debian and Arch (thanks!)
- libedit patch dropped because it's upstream now.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Update collectd to 5.10.0
* leave new plugins as disabled for now (procevent, sysevent)
* refresh patches. Remove unenecessary version fix
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Add the OpenWrt TARGET_LDFLAGS to the compile command to activate PIE support
for the io tool when it is activated globally in OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
On 64 bit Linux systems long is 8 bytes long, on 32 bit Linux systems it
is 4 bytes long. Here we want to print 4 bytes and not 8 bytes, use int
instead of long.
This fixes printing 4 bytes on 64 bit systems.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is need by eg. gpsd to build with proper PPS support.
It was already submitted once in #2892 which ended in a stalemate.
Signed-off-by: Wolfgang Breyha <wbreyha@gmx.net>
Switched to codeload for simplicity.
Switched to PKG_INSTALL for consistency.
Added PKG_BUILD_PARALLEL for faster compilation.
Added extra utilities added by the newer version.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Adjust the reaction to a polling interval timestamp that references
to a past time.
Past timestamps can happen when ntpd adjusts router's time after network
connectivity is obtained after boot. Collectd shows warnings for each plugin
as it tries to enter new values with the same timestamp as the previous one.
This patch adjusts the next polling time to be now+2 seconds for the main
loop and for the plugin-specific read loops. That avoids the warnings, but
does not overreact in case there are shorter polling intervals or the time
gets adjusted for other reasons.
Additionally some debug statements are aded, but they are visible only
when --enable-debug configure option is used in Makefile.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Indeterminably vim/host fails on the build bots:
objects/fileio.o: In function `readfile':
fileio.c:(.text+0x5b3f): undefined reference to `libiconv_close'
fileio.c:(.text+0x61ad): undefined reference to `libiconv_close'
fileio.c:(.text+0x62f6): undefined reference to `libiconv'
fileio.c:(.text+0x6794): undefined reference to `libiconv_close'
objects/fileio.o: In function `buf_write_bytes':
fileio.c:(.text+0xa1fe): undefined reference to `libiconv'
fileio.c:(.text+0xa54a): undefined reference to `libiconv'
objects/fileio.o: In function `buf_write':
fileio.c:(.text+0xaf48): undefined reference to `libiconv_close'
objects/mbyte.o: In function `my_iconv_open.part.18':
mbyte.c:(.text+0x2ced): undefined reference to `libiconv_open'
mbyte.c:(.text+0x2d3a): undefined reference to `libiconv'
mbyte.c:(.text+0x2d5f): undefined reference to `libiconv_close'
objects/mbyte.o: In function `convert_setup_ext':
mbyte.c:(.text+0x33bf): undefined reference to `libiconv_close'
objects/mbyte.o: In function `string_convert_ext':
mbyte.c:(.text+0x363c): undefined reference to `libiconv'
collect2: error: ld returned 1 exit status
link.sh: Linking failed
Makefile:1949: recipe for target 'vim' failed
This is addressed by pulling in libiconv/host. Also configure switches
are added that keep external dependencies to a minimum, for instance
avoiding to link to X11 or gettext.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Just Need runtime tests
* libsane dependency on libusb moved to those drivers that requires it
* clean up some ./configure args
* added saned-ricoh2 for new backend
* enabled saned-gphoto2 (after c8fbe26c53)
* disabled kvs40xx and mustek_usb2 that requires pthread while the issue is
not solved (https://gitlab.com/sane-project/backends/issues/153)
* patches refreshed:
- 002-remove-uneeded.patch
* patches dropped:
- 031-fix_uclibc.patch
- 050-remove_linked_libs_for_unused_preload.patch (with --disable-preload)
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Update to the latest findutils. This eliminates the need for
the sysmacro patch. While we're at it switch to smaller xz
tarball (saves bandwidth)
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
This is not a C++ project.
Added PKG_BUILD_PARALLEL for faster compilation.
Cleaned up Makefile to modern standards.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The original project is dead. feckert fork is active.
Cleaned up Makefile to be more similar to others.
Fixed PKG_MAINTAINER having wrong place.
Added PKG_BUILD_PARALLEL for faster compilation.
Added LICENSE information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
A solution was applied to uClibc++, where the bug actually is.
Fixed license information.
Small cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added patches sent upstream to fix usage with uClibc++.
Cleaned up license information.
Added several size optimizations.
Several other Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This removes lines that set PKG_BUILD_DIR when the set value is no
different from the default value.
Specifically, the line is removed if the assigned value is:
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
The default PKG_BUILD_DIR was updated[1] to incorporate BUILD_VARIANT
if it is set, so now this is identical to the default value.
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_SOURCE_SUBDIR)
if PKG_SOURCE_SUBDIR is set to $(PKG_NAME)-$(PKG_VERSION), making it
the same as the previous case
* $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
This is the same as the default PKG_BUILD_DIR when there is no
BUILD_VARIANT.
* $(BUILD_DIR)/[name]-$(PKG_VERSION)
where [name] is a string that is identical to PKG_NAME
[1]: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e545fac8d968864a965edb9e50c6f90940b0a6c9
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Converted to CMake for simplicity.
Added upstream patch to use sleep_for instead of deprecated usleep.
Added patch to fix compilation with musl.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
