This change:
* Removes building of Lua bindings. These bindings were already removed
upstream[1].
* Fixes building of Python bindings:
* Fix SWIG_DIR path (note that SWIG_VERSION will need to be updated
whenever the swig package is upgraded)
* Fix Python module paths and filenames
* Packages the Python bindings in a new package (python3-sysrepo) and
builds it by default, instead of depending on a config option.
[1]: https://github.com/sysrepo/sysrepo/pull/1429
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
When the user requests 'any' as 'iptype', we may get either IPv4 or
IPv6 settings.
Simplify the logic by not requiring any explicit iptype before loading
the method reported by the bearer object for IPv4 and IPv6; just load
the methods right away and setup settings based on those.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Till now we could only ping http targets on port 80. With this change by
adding the config boolean config option httping_ssl we could also ping
https ping targets on port 443.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Sometimes the return value of `ubus -S call network.interface.wan status`
cause `json_load` to return `Failed to parse message data` error.
To avoid this, the JSON data always should be quoted with double quotes.
Signed-off-by: Evren Yurtesen <eyurtese@abo.fi>
Removed quoatation marks from commit heading
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
There is an issue with the included build scripts which improperly check for a
requirement on libboost-thread where another implementation is available.
Fixes#10273.
Signed-off-by: James Taylor <james@jtaylor.id.au>
seafile-server uses libevhtp pthreads support. libevhtp needs
libevent2-pthreads for that. However, since there is no installable
package for libevhtp--the library is build static-only--then
seafile-server, its consumer, needs to add the dependecy.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Current version of ubus module have some problem with list method. Update the module to fix this problem.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* limit firewall hotplug trigger to certain wan 'INTERFACE' as well,
to prevent possible race conditions during boot
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fix a logical glitch in the hotplug event handler
* properly handle fatal iptables errors - even in subshells
Signed-off-by: Dirk Brenken <dev@brenken.org>
- Migrated init-script to procd.
- Removed the old hotplug script as it is unnecessary and
caused long boot-times for r7800 and possibly others.
Signed-off-by: Christian Lachner <gladiac@gmail.com>
The procd based init setup uses a custom `pidfile` parameter, but the
used MODEMMANAGER_PID_FILE was not being defined anywhere.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Since ModemManager 1.10.2, per-device carrier mapping configuration
files may be installed, providing support for automatic carrier config
selection.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
The bearer status wasn't being loaded in key/value mode, and therefore
would always fail to load the IPv4 config method.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
* print to stdout if 'logger' is not available
* add support to set the service nice level (default is 0)
* small fixes / polish up for forthcoming 19.07 release
Signed-off-by: Dirk Brenken <dev@brenken.org>
* more startup tweaks
* re-use f_log function in helper scripts
* small fixes / polish up for forthcoming 19.07 release
Signed-off-by: Dirk Brenken <dev@brenken.org>
* more startup tweaks
* re-use f_log function in helper scripts
* small fixes / polish up for forthcoming 19.07 release
Signed-off-by: Dirk Brenken <dev@brenken.org>
A set of scripts that parse RSS feeds and downloads files for you.
Recipes are available to send download links to transmission and aria2.
Signed-off-by: Leong Hui Wong <wong.leonghui@gmail.com>
Makefile cleanups for consistency between packages.
Placed libsysrepo in Libraries instead of Utilities.
Removed InstallDev as it is implied by CMAKE_INSTALL.
Added .patch at the end of patch files.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This fixes a runtime startup error on system which does not have a
toplevel runtime directory for the pid file. On openwrt the pid is
located at /var/run and not on /run. To fix that add a configure option to
move the pid location to /var/run.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This fixes a runtime startup error for system, which does not have enabled the
kernel config option CONFIG_PROC_EVENTS.
This workaround was published on github under the following URL.
https://github.com/acassen/keepalived/issues/1119
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* fix race condition in download utility detection during boot
* fix multiple possible bugs in ipset creation
* prevent parallel service starts
* refine service trigger handling
* add ssh daemon auto detection
* print to stdout if 'logger' is not available
Signed-off-by: Dirk Brenken <dev@brenken.org>
MBIM and QMI support (necessary for modern and
high-performance LTE modems) should be default
y otherwise the only way to use modemmanager
with these protocols is to recompile the package.
This is very inconvenient for most end users.
Also fix typo in PKG_HASH definition.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Fixed license information.
Use xz archives.
Use PKG_SOURCE_DATE instead of PKG_VERSION, which evaluates to the same.
Use HTTPS, which goes through firewalls more easily.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- Adds ubus module to nginx
- Select module by default
- Adds script to detect ubus module and append config for luci
- Switch all external module to xz
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Switched to standard PKG_INSTALL.
Added PKG_BUILD_PARALLEL for faster compilation.
Added some size optimizations.
Added license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
OpenSSL is already built as part of tools (LibreSSL actually) and can be
used instead for the host build.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This updates all Python packages that download their source from PyPi to
use pypi.mk.
This will allow future improvements/changes to pypi.mk to affect all
relevant packages.
This also makes it easier for future Python packages to start using
pypi.mk, when it's clear how it is used in existing packages.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
the patches 010-Fix-compilation-when-OpenSSL-has-no-ENGINE-support
and 020-Fix-compilation-without-deprecated-OpenSSL-APIs are now
merged upstream, so they must be dropped from the OpenWrt pkg
Signed-off-by: Saverio Proto <zioproto@gmail.com>
MM has a problem with cross-compiling. It needs to run some
tools during compilation (glib-mkenums & gdbus-codegen) but uses
pkg-config to detect them. But like this it finds the wrong tools, the
ones in $(STAGING_DIR). The correct tools are in
$(STAGING_DIR_HOSTPKG)/bin.
As a workaround this commit patches configure.ac so the correct tools
are used, the ones from glib2/host. The latter is also added to
PKG_BUILD_DEPENDS to reflect this.
libxslt/host is also added to PKG_BUILD_DEPENDS and the related
RequireCommand call is removed. This is OK to do since we have
libxslt/host available since a few days ago.
Resolves#10249
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- rename the section instance to yggdrasil (feat. request)
- allow zone to cover both ip4 and ip6 fam
Signed-off-by: William Fleurant <meshnet@protonmail.com>
After many failed attempts at upgrading Django to 2.2.6, the solution seems
to be to split a `python-django1` package that works with Python2 and
upgrade `python3-django` to the latest 2.2[.6] LTS release.
This also means that all Python2 Django packages will be stuck & based on
Django 1.11[.24] LTS release. But, it's currently the sanest approach I
could find to be able to perform an upgrade of Django to 2.2, and not break
Seafile.
Upgrading Seafile is also pretty difficult, as their Python3 support is not
yet finished & released. And in the meantime, we want to allow people to
use newer Django versions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Upstream release message:
"Letsencrypt CA recent changed the CDN provider, which resulted in hanging issues.
Any downstream package should update.
This is important."
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Add required libevent2-pthreads dependency for all ntpd
subpackages.
Remove keygen-specific libevent2-core support as it is
automatically selected by the libevent2-pthreads dependency.
nptd: Bump PKG_RELEASE
Fixes: openwrt/packages#10307
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
argp-standalone is only needed for non GLIBC targets.
Added PKG_BUILD_PARALLEL for faster compilation.
Removed unnecessary C/LDFLAGS.
Remove libstdcpp depends. It's included with libfmt.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This removes lines that set PKG_BUILD_DIR when the set value is no
different from the default value.
Specifically, the line is removed if the assigned value is:
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
The default PKG_BUILD_DIR was updated[1] to incorporate BUILD_VARIANT
if it is set, so now this is identical to the default value.
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_SOURCE_SUBDIR)
if PKG_SOURCE_SUBDIR is set to $(PKG_NAME)-$(PKG_VERSION), making it
the same as the previous case
* $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
This is the same as the default PKG_BUILD_DIR when there is no
BUILD_VARIANT.
* $(BUILD_DIR)/[name]-$(PKG_VERSION)
where [name] is a string that is identical to PKG_NAME
[1]: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e545fac8d968864a965edb9e50c6f90940b0a6c9
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Fixes following errors:
main.c:458:37: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
main.c:463:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’ [-Werror=sign-compare]
main.c:518:35: error: comparison of integer expressions of different signedness: ‘ssize_t’ {aka ‘long int’} and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
main.c:157:3: error: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Werror=unused-result]
main.c:763:3: error: ignoring return value of ‘chdir’, declared with attribute warn_unused_result [-Werror=unused-result]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
- add uwsgi patch to add option to don't follow simbolic link but call it directly (waiting to be approved)
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Currently cgi-io try to read data after the data ended.
- Adds "-" to whitelist char
- In main_upload is tried to consume the buffer while it's already readed by the while loop before
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
lightweight client for the RFC8555 ACMEv2 protocol, written in plain C code
with minimal dependencies (libcurl and one of GnuTLS, OpenSSL or mbedTLS).
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* the WAN auto detection now supports multiple interfaces, too
* no longer filter out possible LAN devices
* add a new DoH (DNS over HTTPS) blocklist source with public
DoH DNS server addresses, to effectively block client side DoH
communication, e.g. via Firefox or Chrome
Signed-off-by: Dirk Brenken <dev@brenken.org>
* new 'ca-bundle' dependency as all https connections
are now validated by default
* automatically select the download utility: 'aria2', 'curl',
'uclient-fetch' with libustream-* or wget are supported
* track & ban failed LuCI login attempts as well
* add a small log/banIP background monitor to block
SSH/LuCI brute force attacks in realtime (disabled by default)
* add a config version check (please update your default config!)
* made the automatic wan detection more stable
* fix the IPv6 logfile parser
* fix the service status message
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
Fix kea-admin dependency where if procps-ng-ps wasn't available busybox
would output an error casuse it does't support showing a processe's PID
Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
Fix an issue where the Makefile wouldn't allow kea to show up in the
menuconfig Also added some description to the packages
Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
Condition testing for Linux version 4.14 is spelled LINUX_4_14, not
LINUX_4.14, so the checks were ineffective up to this change.
This Fixes the following error which appeared after update to 2.12.0,
when built against kernel 4.14:
Package kmod-openvswitch-intree is missing dependencies for the
following libraries:
tunnel6.ko
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
debug is boolean option/flag so setting it to 9 doesn't work, while at
it I've synchronized boolean options from source code and sorted it
alphabeticaly with following command:
grep flag src/cmdline.ggo | cut -d \" -f2 | sort | tr '\n' '|'
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Code in option_cb was referencing $chilli_inst variable which was
declared as local, thus the instance startup logic in start_chilli was
referencing variable which would always get value of 1, effectively
making `disabled` config option useless.
So I've fixed it with simpler config_get_bool and while at it, I've simplified the
surrounding code little bit as well.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
apcupsd's configure script looks up paths to sh, wall and mail on the
host system, but intends to use them on the target system. OpenWrt
replaces apcupsd's scripts by its own versions, so those paths don't
really matter, however, if the host system doesn't have wall installed,
the build fails. This is the case on Gentoo when util-linux is built
with USE=-tty-helpers (default). Prevent such failures by providing
explicit stub paths to sh, wall and mail to configure script.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Before the CMake update, either protobuf was being installed to HOST
instead of HOSTPKG by mistake or some other problem.
This adds a linker flag to look in the proper location.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Some firewalls mandate a minimum size of 4k for SYN packets, which
transmission does not do by default. Upstream issue here:
https://github.com/transmission/transmission/issues/964
Cleanup:
Fixed license info.
Removed two unnecessary patches.
Ran shell script through shellcheck.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Switched to CMAKE_INSTALL to get rid of InstallDev.
Added PKG_BUILD_PARALLEL for faster compilation.
Fixed license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Several other cleanups.
Added PKG_BUILD_PARALLEL for faster compilation.
Removed PKG_INSTALL as cmake.mk already defines it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This can be helpful for example in hotels where you need to
enter a new user/password combination every week.
Signed-off-by: Johannes Rothe <mail@johannes-rothe.de>
Compile Tested: yes, selects lua as implementation and doesn't pick up luajit
Run Tested: no, minor change
Maintainer: me
Description:
On some architectures PowerDNS was preferring Luajit over Lua, which wasn't added
as a dependency. On previous versions this was controlled by passing `--with-lua`
and `--without-luajit` however this isn't functional anymore.
On the 4.2 series, it is instead possible to define the lua implementation to be
used by passing `--with-lua=[implementation]` ie `--with-lua=lua`
Signed-off-by: James Taylor <james@jtaylor.id.au>
nut uses gdlib-config to find libgd, which happens to be deprecated. This
switches it to use pkgconfig and allows a fallback to gdlib-config, same
as the libusb check.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Bump PowerDNS Authoritative DNS Server to 4.2.0. Release changelong can be found at
https://doc.powerdns.com/authoritative/changelog/4.2.html#change-4.2.0
Compile Tested: OpenWRT Snapshot - armv7
Run Tested: Linksys WRT1900ACS - package runs correctly, not all functionality has been tested.
Signed-off-by: James Taylor <james@jtaylor.id.au>
Instead of always replying with a generic 500 internal server error code,
use more appropriate codes such as 403 to indicate denied permissions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Add a new `cgi-download` applet which allows to retrieve the contents
of regular files or block devices.
In order to initiate a transfer, a POST request in x-www-form-urlencoded
format must be sent to the applet, with one field "sessionid" holding
the login session and another field "path" containing the file path to
download.
Further optional fields are "filename" which - if present - will cause
the download applet to set a Content-Dispostition header and "mimetype"
which allows to let the applet respond with a specific type instead of
the default "application/octet-stream".
Below is an example for the required acl rules to grant download access
to files or block devices:
ubus call session grant '{
"ubus_rpc_session": "...",
"scope": "cgi-io",
"objects": [
[ "download", "read" ]
]
}'
ubus call session grant '{
"ubus_rpc_session": "...",
"scope": "file",
"objects": [
[ "/etc/config/*", "read" ],
[ "/dev/mtdblock*", "read" ]
]
}'
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use the `cgi-io` scope to check for permission to execute the requested
command (`upload`, `backup`) and the `file` scope to check path
permissions.
The reasoning of this change is that `cgi-io` is usually used in
conjunction with `rpcd-mod-file` to transfer large file data out
of band and `rpcd-mod-file` already uses the `file` scope to manage
file path access permissions. After this change, both `rpc-mod-file`
and `cgi-io` can share the same path acl rules.
Write access to a path can be granted by using an ubus call in the
following form:
ubus call session grant '{
"ubus_rpc_session": "...",
"scope": "file",
"objects": [
[ "/var/lib/uploads/*", "write" ]
]
}'
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The `python-mysql` package was updated with PR https://github.com/openwrt/packages/pull/9705
For seahub this was omitted, since the Python dependencies are prefixed
with `python-`, so it was missed during the grep search.
And grepping just for `mysql` yields many results.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
commit 0c090fde68b2 ("scons: move host build tool to a proper place")
has moved scons into the packages feeds, so switch to that package
include and adjust build dependency to a new scons home.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
The CONTRIBUTING.md requests an (or multiple) SPDX identifier for GPL
licenses. But a lot of packages did use a different, non-SPDX style with a
"+" at the end instead of "-or-later".
Signed-off-by: Sven Eckelmann <sven@narfation.org>
* remove 'http-only' mode, all sources are now fetched from https sites
* the backup mode is now mandatory ('/tmp' is the default backup
directory), always create and re-use backups if available.
To force a re-download take the 'reload' action.
* support 'sshd' in addition to 'dropbear' for logfile parsing
to detect break-in events
* always update the black-/whitelist with logfile parsing results
in 'refresh' mode (no new downloads)
* rework the return code handling
* tweak procd trigger
* various small fixes
* (s)hellsheck cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
So that packages like acme requiring features from it can depend on it
explicitly, not the more basic "wget" which is also provided by
"uclient-fetch"
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* use raw procd interface trigger as last resort, if the
adblock config is not available during startup
* fix selective subdomain whitelisting for dnsmasq
* fix a kresd restart issue with 'DNS File Reset'
* fix a suspend/resume cornercase
* disable the tld compression, if the number of blocked domains
is greater than 'adb_maxtld' (default: 100000)
* made the fw portlist configurable (default '53 853 5353')
* preliminary support for inotify-like autoload features
of dns backends like kresd in future Turris OS. If 'adb_dnsinotify'
is set to 'true', all adblock related restarts and the
'DNS File Reset' will be disabled
Signed-off-by: Dirk Brenken <dev@brenken.org>
The double quote thells the shell that the list returned from `pidof` is a
single argument, therefore, `renice` will cry about a malformed input.
With this commit, `renice` will be applied correctly to all the returned PIDs
from `pidof`.
The output of `renice` for the quoted list is as follows:
`renice: invalid number '6592 6587 6586 6574'`
`renice` does not show and does apply the nice value if the list is unquoted.
Signed-off-by: Oever González <notengobattery@gmail.com>
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
The package on PyPi is named `mysqlclient`.
This should have been named `python-mysqlclient` from the start.
There is a `mysql` package on PyPi already but that's a different
code/package.
Doing this should avoid any future confusion.
There is no good time to do this rename; at least 19.07 has been branched
already and this can go into the next release [in a year or so].
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Maintainer: Jakub Tymejczyk <jakub@tymejczyk.pl>
Compile tested: ramips, Xiaomi Router 3G, fc54256
Run tested: ramips, Xiaomi Router 3G, 0f54d96
Description:
Mosh is "Remote terminal application that allows roaming, supports
intermittent connectivity, and provides intelligent local echo and line
editing of user keystrokes".
Project's site: https://mosh.org
Makefile and patch taken from: https://github.com/mchwalisz/mosh-openwrt
updated by me
Signed-off-by: Jakub Tymejczyk <jakub@tymejczyk.pl>
(Makefile cleanup and size optimizations)
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- Correct SPDX License Identifier
- Move MAINTAINER, SUBMENU to more appropriate place
- Use HTTPS in URL
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
As discussed on GitHub[0] the package should be removed.
[0]: https://github.com/openwrt/packages/issues/7832
> The package is effectively orphaned upstream and has been for some
time. Given the security-sensitive nature of the package, an active
maintainer community is essential for safe usage. Racoon's lack of
support for IKEv2, despite it being stable for a long time, and the
availability of next-generation tunneling systems such as wireguard,
also would seem to limit its future value. Setkey's functionality
has been subsumed by 'ip xfrm'.
> If you disagree that ipsec-tools should be removed from OpenWRT,
please say so now. If there are still use cases for it that are
not met by other IKE implmenentations that would be good to
know. But more importantly, I think you'll need to convince us
that ipsec-tools is actually safe to operate on today's Internet
given its current state of development.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Introduce further ACL checks to verify that the request-supplied
upload location may be written to. This prevents overwriting things
like /bin/busybox and allows to confine uploads to specific directories.
To setup the required ACLs, the following ubus command may be used
on the command line:
ubus call session grant '{
"ubus_rpc_session": "d41d8cd98f00b204e9800998ecf8427e",
"scope": "cgi-io",
"objects": [
[ "/etc/certificates/*", "write" ],
[ "/var/uploads/*", "write" ]
]
}'
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* automatically add open uplinks to your wireless config,
e.g. hotel captive portals (disabled by default)
* shift net status check in a separate function
* (s)hellcheck cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Fixes issue where CFLAGS were not being passed. This was breaking ASLR
builds.
Added PKG_BUILD_PARALLEL for faster compilation.
Added PKG_INSTALL. Changed install paths based on PKG_INSTALL paths.
Added --disable-debug to make sure debug code is disabled.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
On a Debian system without python3-distutils install, uwsgi-cgi was
failing to build because it couldn't import sysconfig from distutils.
OpenWrt packages should be using the OpenWrt python not the system
python. In addition we need to use python3 not python2, even when
both are available.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* fix a dns restart issue if 'flush dns cache' is set
* fix a suspend/resume issue, the status wasn't properly updated
* fix a long standing query issue
* rework return code handling, mostly for debugging
* various cleanups & cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Development moved to GitHub. Update URLs.
Cleaned up Makefile a bit for consistency between packages.
Added patch that removes deprecated bzero.
Ran init script through shellcheck. Fixed minor warnings.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Bidirectional Forwarding Detection (BFD) is a network protocol that is used to
detect faults between two forwarding engines connected by a link.
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* update to git (2019-08-19)
* use new "kill_server" sysfs option on stop
* ensure reload_service() works correctly
* add inherit owner, force create mode, force directory mode UCI options
* add patches for mips target (vfree, vmalloc)
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* background service: no longer miss "signal" events for the
dns backend (to trigger adblock)
* fix a dns backend reload issue during switch between
different blocking modes
* domain query: report found domains only once in
"null" blocking mode with IPv4 & IPv6 list entries
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fix a possible race condition during DNS file reset on slow hardware
* optimize DNS restart behaviour in 'null' blocking mode
* mute useless warnings
Signed-off-by: Dirk Brenken <dev@brenken.org>
This commit updates:
- bump version to v20190809
- fix PKG_LICENSE_FILES
- rename package names to kcptun-server, kcptun-client
- refactor Makefile
- merge config and service scripts
- add more config options to support all features
- add additional options: gogc, syslog, user
- add README.md
Reference:
- package shadowsocks-libev
Signed-off-by: Chao Liu <expiron18@gmail.com>
* add support for 'DNS File Reset', where the final DNS blockfile
will be purged after DNS backend loading (save storage space).
A small background service will be started to trace/handle
dns backend reloads/restarts
* add support for the 'null' blocking variant in dnsmasq
(via addn-hosts), which may provide better response times
in dnsmasq
* enhance the report & search engine to support
the new blocking variants. Search now includes
backups & black-/whitelist as well
* compressed source list backups are now mandatory (default to '/tmp')
* speed up TLD compression
* E-Mail notification setup is now integrated in UCI/LuCI
* update the LuCI frontend to reflect all changes (separate PR)
* drop preliminary dnscrypt-proxy-support (use dnsmasq instead)
* drop additional 'dnsjail' blocklist support (not used by anyone)
* procd cleanups in init
* various shellcheck cleanups
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
Fixes:
when using HTTP/2 a client might cause excessive memory
consumption and CPU usage (CVE-2019-9511, CVE-2019-9513,
CVE-2019-9516).
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
iotivity's scons build script is not compatible with python3, so use
python2.7 from python/host to run it.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Otherwise compilation fails when clang-tidy is found in the host:
-- clang-tidy found: /usr/lib/llvm/7/bin/clang-tidy
error: unknown argument: '-fhonour-copts' [clang-diagnostic-error]
error: unknown argument:'-iremap[...]:https_dns_proxy-2018-04-23'
[clang-diagnostic-error]
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
This avoids copying /usr/include, unversioned *.so files, pkgconfig,
/usr/lib/*.la, and the build-time libs/cflags configuration utility
clamav-config.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
f5420af phantap: do not capture vlans
5d1bd13 phantap-learn: improve the BPF filter, exclude vlans
be6f7d9 Readme.md: we now support talking to the victim.
8789da5 README.md: fix typo
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Full changelog here: https://mosquitto.org/blog/2019/08/version-1-6-4-released/
Fixes a regression in persistent session handling, and various other
regressions related to the mqtt5 support.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Changelog prepared by upstream project
* osport.h: replace SUSv3-specific functions by POSIX variants [Fabrice Fontaine]
* avp: Error Code field in Result Code AVP is optional [Pau Espin Pedrol]
* network_thread: Early continue in loop to remove huge indented block [Pau Espin Pedrol]
* network_thread: Simplify while loop using for loop [Pau Espin Pedrol]
* network: connect_pppol2tp: early return to avoid huge indentation block [Pau Espin Pedrol]
* xl2tpd: start_pppd: Fix truncation of last character [Pau Espin Pedrol]
* handle_packet: Remove unneded else clause when handling payload [Pau Espin Pedrol]
* control: Split control message handling into its own function [Pau Espin Pedrol]
* handle_packet: Rearrange code flow to simplify it [Pau Espin Pedrol]
* avp: Early failure if no handler to remove indent block [Pau Espin Pedrol]
* xl2tpd: Mark internal symbols as static [Pau Espin Pedrol]
* Fix indentation and whitespace in code block [Pau Espin Pedrol]
* xl2tpd: Remove unused variable [Pau Espin Pedrol]
* network: Add missing close(kernel_fd) on init network failure [Pau Espin Pedrol]
* network: Add missing close(server_fd) on init network failure [Pau Espin Pedrol]
* Add 'cap backoff' option, limiting exponential backoff retries will
be delayed by exponentially longer time, unless that time is capped
by configuration. [Bart Trojanowski]
* Add program to show status icon in system tray. [Github user: username34]
* Add info on building and installing xl2tpd [Samir Hussain]
* Update formatting of README.md [Samir Hussain]
* Rename README.xl2tpd to README.md [Samir Hussain]
* Update Debian changelog [Samir Hussain]
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Firewall needs to be reloaded in the following cases:
- on service start when snmpd.general.enabled=1
- when snmpd daemon is stopped
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
This should fixopenwrt/packages#9346 ("shadowsocks-libev: undefined
behavior from unaligned access")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Makefile always checks the existence of host's NAT-PMP header,
which results in internal NAT-PMP code being used if it's missing.
Add a patch to make it check targets' header instead.
Use aligned_alloc() instead of valloc() in case of uclibc.
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
kcptun is a stable & secure tunnel based on kcp with N:M multiplexing.
https://github.com/xtaci/kcptun
Signed-off-by: Dengfeng Liu <liudf0716@gmail.com>
* add extra options to control auto-addons to
blacklist & whitelist ('ban_autoblacklist' & 'ban_autowhitelist',
both enabled by default). If disabled auto-addons are only stored
temporary in the black/whitelist ipset but not in the list itself,
fixes#9631
* remove old, no longer needed procd workaround
* remove 'zeus' source from default config (discontinued)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add missing dnsmasq dependency
* add a captive portal auto-login hook (configurable via uci/LuCI),
you could reference an external auto-login script - see readme
* provide an auto-login script for german ICE hotspots
(/etc/travelmate/wifionice.login), requires 'curl'
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
This includes a major bug fix (2ed9c76) and some minor fixes/improvements
f104742 phantap-learn: do not use proto for ip neigh
9849b0f phantap-learn: cleanup
159653d Readme.md: update install instructions
ff3acc2 phantap: add support for talking to victim.
2ed9c76 phantap: Fix MAC snat
f6f2d2d Phantap: fix dns configuration
40fa14b phantap: look at DNS response instead of request
0d62deb Improve Readme
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Maintainer: Florian Eckert @feckert
Compile tested: not needed
Run tested: x86_64
Description:
Only two of the four IPs defined for wan are found in wanb, adding it so it is the same.
Signed-off-by: Daniel A. Maierhofer <git@damadmai.at>
We add the necessary Makefile, hotplug, config, and init bits
so that p910nd daemon runs as user:group p910nd:lp by default.
This eliminates an unnecessary root daemon.
The hotplug script sets the permissions of the USB lp
device(s) to read-write owner and group and no access to
anyone else, and sets owner root, group lp.
This is allows sufficient privileges to p910nd
to do it's job.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Since this package has been abandoned, I don't mind taking it over.
If there are issues with it, I can also investigate, and be a point-man.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
PhanTap or Phantom tap is a small set of scripts that allow you to setup a network tap
that automatically impersonnate a victim device, allowing you to access internet using
the IP & MAC of the victim
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
It was requested in #9065 .
Cleaned up Makefile slightly.
Removed inactive maintainer.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
When compiled with musl >1.1.20, fastd will crash in case it can't
resolve a peers hostname. This is due to a changed implementation of
freeaddrinfo in musl 1.1.21 onwards.
This segfault is fixed by not calling freeaddrinfo in case the supplied
pointer is null.
Signed-off-by: David Bauer <mail@david-bauer.net>
Main warning fixed was about echo -e not being supported by POSIX sh.
Added PKG_BUILD_PARALLEL for slightly faster compilation.
Small whitespace cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Maintainer: me
This commit bumps the version of pdns-recursor to the latest 4.2.0. This release brings in mostly minor changes, with the full changelog available at https://doc.powerdns.com/recursor/changelog/4.2.html
Signed-off-by: James Taylor <james@jtaylor.id.au>
* revert to 4.9.x series (4.10 needs too many unofficial patches and has weird waf bugs)
* cleanup patches
* enable AD_DC build option again
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
usleep is a legacy function that was removed in POSIX-2008. uClibc-ng can
be configured to compile without it. if out the code as it's not used.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This changes the init script to allow to monitor up to 8 network
interfaces. The support for up to 8 network interfaces was added to
mini_snmpd release 1.3 in November 2015.
Signed-off-by: Marcel Telka <marcel@telka.sk>
The maintainer is inactive, in addition to this package being woefully out
of date. It probably does not work properly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* adds cifs/smb kernel server module (cifsd)
* adds userspace tools (cifsd, cifsadmin)
* has UCI support (compatible with samba configs)
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
softethervpn overrides nls.mk by defining its iconv functions. This only
works if the libc has iconv. In addition, it does not allow external
libiconv usage. TARGET_LDFLAGS is also the wrong place to add -liconv.
Removed SSL3 patch. It was needed for OpenSSL 1.0.2 but not anymore.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This change also updates the maintainer email to cotequeiroz@gmail.com, as
requested on a different change.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This change also updates the maintainer email to cotequeiroz@gmail.com, as
requested on a different change.
Also, changing here is the download URL to github's codeload, since that
one offers .tar.gz archives.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The pillow package has been updated to the Python[3] packaging format, and
now the package names are `python-pillow` & `python3-pillow`.
This change updates seafile-seahub to use it.
Not updating other packages as they will be converted to Python[3]
packaging format.
And not bumping PKG_RELEASE here as it will be done in the last commit that
updates deps for seafile-seahub.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Patch taken from upstream fixes an Invalid argument error while trying
to get the IP address of an interface.
Makefile was updated to current style.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Removed upstreamed patch.
Removed mirror. It seems it has a wrong HTTPS certificate.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* fix a corner case issue with auto expiry of the
'Faulty Station' list (the last run information was not updated)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Needed for the new protobuf update.
Cleaned up Makefile.
Got rid of HOST_BUILD_DEPENDS. This package does not have a host build.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This change adds support for mstpd (Multiple Spanning Tree Protocol
Daemon).
mstpd works reasonably well with RSTP.
MSTP protocol works ok, but is known to have some issues with some managed
switches.
In order to get this to work, each physical switch port needs to have it's
own software network interface (so, for example: port 0 <==> eth0). This
means that this is suited mostly for higher end devices that can process
STP packets in software.
An interface for `swconfig` or Linux's DSA or switchdev would haven been
interesting, but it never materialized.
Adding this in the OpenWrt packages feed may provide some interest or
feedback on whether `mstpd` should do more, to integrate with managed
switches and offer some basis for Linux (through OpenWrt) as an OS for
managed switches.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Parallel building is causing a failure because it executes some
commands, such as patch, more than once.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
The configure test for gettimeofday does not include the proper header.
Override the variable as all OpenWrt libc have two arguments for
gettimeofday.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* use '$ddns_rundir' in 'get_service_data' for pipe creation, fix#8971
* add missing local variables in 'get_service_data'
* change DNS server verification with drill in 'verify_host_port',
fix/supersed #8935
* remove needless cat calls in 'verify_host_port'
* set cloudfare TTL to min. 120 seconds, fix#7745
* bump/align package version number
Signed-off-by: Dirk Brenken <dev@brenken.org>
Maintainer: me
This commit addresses a build failure around guards on execinfo.h usage to
prevent uclibc from pulling it in, as it defines both __GLIBC__ and __UCLIBC__.
The original patch had invalid syntax which this corrects.
Signed-off-by: James Taylor <james@jtaylor.id.au>
Maintainer: me
Compile tested: armv7l, OpenWRT SDK
Run tested: armv7l Linksys WRT1900ACS, OpenWrt SNAPSHOT, r9987-655fff1571 -
confirmed PowerDNS recursor links correctly against libraries and runs on my
target environment.
Description:
PowerDNS Recursor is a high-performance resolving name server, utilizing
multiple processor and including Lua scripting capabilities.
This commit includes the recursive nameserver
https://www.powerdns.com/recursor.html
Signed-off-by: James Taylor <james@jtaylor.id.au>
- Now using codeload as suggested.
- Removed PKG_BUILD_PARALLEL, and PKG_USE_MIPS16:=0 as it was no longer needed to build the latest version successfully.
- Moved PKG_MAINTAINER to top.
- Use INSTALL_BIN instead of CP
- Added PKG_LICENSE and PKG_LICENSE_FILES
- Fixed a typo in TITLE
- DCO should be fixed now.
Signed-off-by: Andreas Nilsen <adde88@gmail.com>
If we're going to have a list of ntp servers, we should at least respect
them. Fallback to the original static list if no configured servers are
found.
Signed-off-by: Karl Palsson <karlp@etactica.com>
This is required for conntrack zone limit support. Linux upstream
commit is 11efd5cb ("openvswitch: Support conntrack zone limit")
Ref: https://github.com/openwrt/packages/issues/9274#issuecomment-507181166
Reported-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
STAGING_DIR_HOST is for packages under tools/ , not host packages.
Reorganized Makefile for consistency between packages.
Added PKG/HOST_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added -Wno-error to fix.
Also added patch to fix compilation without deprecated OpenSSL APIs.
Added PKG_BUILD_PARALLEL for faster compilation.
Switched libcyassl to libwolfssl.
Reorganized makefile for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
It seems there is a mistake in the version I sent upstream.
Cleaned up Makefile for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* optimize the main scan/iwinfo call (performance & system load):
- remove a needless f_trim function call
- remove a redundant awk call
- reduce the scan buffer size and
make it configurable (trm_scanbuffer, default 1024 bytes)
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
the latest update url format for deSEC is
http(s)://update.dedyn.io/update?username=[USERNAME]&password=[PWD]
Signed-off-by: James Qian <sotux82@gmail.com>
This applies to uClibc-ng and libiconv-full
Switched to building with uClibc++.
Fixed license information.
Fixed BUILD_DEPENDS.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
PowerDNS released two new versions which together add some features and address security issues.
Changelog: https://doc.powerdns.com/authoritative/changelog/4.1.html
This release and 4.1.9 together fix the following security advisories:
PowerDNS Security Advisory 2019-04 (CVE-2019-10162)
PowerDNS Security Advisory 2019-05 (CVE-2019-10163)
Signed-off-by: James Taylor <james@jtaylor.id.au>
Backported upstream patches that fix this.
Removed local patch that fixes libp11 with version 0.4.7, which is not
used anymore. Upstream has a different solution.
License fixes and Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The arc700 target (and probably others) uses uclibc as it's c-library. However,
uClibc's libcrypt seems to not support the crypt_data struct which broke
the build. This fix adds a new build-target to haproxy which does not use
libcrypt. Summing up, this commit does:
- Add support for uclibc to haproxy with libcrypt disabled
- Add detection of c-library to configure the correct build-target
- Silence additional warnings
- Update patches
Signed-off-by: Christian Lachner <gladiac@gmail.com>
This service monitors (each 3s) switchdev ports and brings down CPU
ports when all related non-CPU vlan ports are also down. Otherwise,
it brings the port up.
In order to hide CPU ports from netifd, when a device is brought down,
the device is renamed adding the suffix "_down".
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
- Update haproxy download URL and hash
- Add new patches
- Add several CFLAGS (derived from haproxy Makefile) to make the build work with v1.9+
- Update default configuration
- Add check-command (for config) to init-script
- Add prometheus-service from contribs by default
Signed-off-by: Christian Lachner <gladiac@gmail.com>
This change is inspired by commit openwrt/openwrt@38b22b1e ("nghttp2:
deduplicate files in libnghttp2")
The packages in this commit are identified with the following command
grep -rin -E 'INSTALL_(DATA|BIN)' | grep -F '.so' | grep -F '*'
Some of them do not have symlinks and are not affected, but the change
is still applied for consideration of best practices just in case
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fixes: https://github.com/openwrt/packages/issues/9255
This seems to fail the build for this package only.
So, this change patches the build, to add `-lssp` to the LDFLAGS of this
package, in case the build uses GCC's libssp.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The nsh.ko requirement was introduced in kernel 4.15. Currently there
are 3 kernel versions in base system, 4.9, 4.14, 4.19
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
This is a workaround to prevent the whole build from failing because of
the intree kmods are not supported yet by upstream project.
Root cause is that kernel version should not play a part when making
DEPENDS as the generated kconfig was for all targets that may have
different kernel versions.
One less than ideal effect of this change is that for an unsupported
kernel version, people can still select the intree kmod but it won't be
built. This may contradict expectation if the warning was not noticed
by them
Resolvesopenwrt/packages#9274
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Change log for v3.11.1716:
[IMP] Replaced libhttpd with libevent, therefore commented thread
related parameters in wifidogx conf file
[IMP] Added REQUEST_TYPE_COUNTERS_V2 to wifidog protocol
[IMP] Sent online and offline client's counter info to auth server
[FIX] Fixed missing setting online_time parameter bug
Signed-off-by: Dengfeng Liu <liudf0716@gmail.com>
- treat RFC6762 'local.' as nxdomain because avahi and other services
will disable if SOA or NS records appear in central DNS.
- allow two threads to be enabled with the 'heavy traffic' variant of
Unbound packages.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
* refine 'refresh' mode, add normal processing/download as fallback
* remove needless reload trigger
* fix various ipset warnings
* fix timer in 'refresh' mode
* adapt ssbl regex to new source list format
Signed-off-by: Dirk Brenken <dev@brenken.org>
seafile-seahub's build is a mess.
It hijacks some OpenWrt mk files into the build.
This can be avoided by provided some of the required parameters via
env-vars and patching the env-vars into the build.
Which is what this patch does.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The change is mostly organizational.
More packages will be moved to have python- or python3- prefixes.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
remove unused patches
Add patch to:
Automatically detect whether Curve25519 is available in NSS for USE_DH31
Signed-off-by: Antony Antony <antony@phenome.org>
enable libunbound, along with dependency
add kmod-crypto-aead kmod-crypto-gcm dependency to support AES GCM
disable libseccomp
/git/openwrt/build_dir/target-mips_24kc_musl/libreswan-3.27/include/lswseccomp.h:24:10: fatal error: seccomp.h: No such file or directory
#include <seccomp.h>
^~~~~~~~~~~
add missing dependency nspr
add nss-utils dependency to able to import x509 Certificates to fix the error
ipsec import west.p12
/usr/sbin/ipsec: line 239: pk12util: not found
/usr/sbin/ipsec: line 84: certutil: not found
remove libnss dependency, nss-utils util will pull it.
remove unused build option KERNELSRC not necesscay since b4b98e2922.
Signed-off-by: Antony Antony <antony@phenome.org>
Maintainer: me
Compile tested: armv7l, OpenWRT SDK
Run tested: armv7l Linksys WRT1900ACS, OpenWrt SNAPSHOT, r9987-655fff1571 -
confirmed PowerDNS server links correctly against libraries. I'm unable to test
all the backend modules as I don't have suitable backing stores set up for each.
Description:
PowerDNS is a versatile nameserver which supports a large number of different
backends ranging from simple zonefiles to relational databases and load
balancing/failover algorithms. PowerDNS tries to emphasize speed and security.
This commit includes the authoritative nameserver, backends and additional tools
https://www.powerdns.com/auth.html
Signed-off-by: James Taylor <james@jtaylor.id.au>
Change log for v2.88:
[IMP] Added support for search and replace privacy expressions.
[IMP] Added support for masking external addresses with private address ranges.
[IMP] When enabled, trigger a sink update on start-up.
[IMP] Added flow hash cache.
[IMP] Added HTTPS as a super-protocol of SSL.
[IMP] Add ability to save DNS hint cache to non-volatile (persistent) memory.
[IMP] Save sink responses when "json_save" is enabled.
[IMP] Added dynamic sink URL cloud configuration.
[IMP] Implemented per-detection-thread packet capture queue.
[IMP] Added support for a loadable serial UUID.
[IMP] Added configuration option to override sink connection timeout.
[IMP] Idle flow TTLs tunable via configuration directives.
[IMP] Added idle TCP flow multiplier to keep TCP flows in memory longer.
[IMP] Added new flow metadata "first_update_at" timestamp.
[IMP] Added complete reference sample configuration file.
[IMP] Various optimizations and fixes for FreeBSD.
[IMP] Employ advisory locking when writing output files.
[FIX] Ensure all configuration files are preserved on upgrades.
[FIX] Fixed automatic interface role detection for nethserver/shorewall.
[FIX] Memory usage fixes using profiling tools.
[UPD] Updated to nDPI v2.9.0-dev-709a87c.
[OPT] Flush and compress upload queue as soon as possible.
[OPT] Significantly reduced detection thread locking times.
[DEV] Added example plugin submodule to repository.
Signed-off-by: Darryl Sokoloski <darryl@sokoloski.ca>
Use link-time optimization and --gc-sections --as-needed ldflags
Reduces ipk size by 20%
Remove unnecessary dependencies
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Fix license info to use SPDX name.
Switched to wget instead of curl to avoid having a dependency on 2 SSL
libraries.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Busybox brctl applet conflicts with the version from bridge-utils.
Fix this by using ALTERNATIVE support for brctl in bridge-utils.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
[PKG_RELEASE bump]
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
OpenWrt toolchains already use correct CFLAGS for every ARM target
There is no reason to use conservative CFLAGS now
It also causes compile error with GCC 9.1.0
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Moving the DNSDIST package into the IP Addresses and Names subcategory under Network. This will make it easier to find since it will be with other DNS tools.
Signed-off-by: James Taylor <james@jtaylor.id.au>
With this change it is now possible to combine interface action events.
If an interface action is generated by netifd or mwan3 for example ifup,
ifdown, connectd or disconnected and this action is configured in the inteface
uci section, then the conntrack table is flushed by mwan3.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This fixes a crash that happens when dhcpd is configured with a failover
peer, and the failover peer goes down. The crash is due to a dereference
of a freed object. When tracing is enabled (which is the default) the
object in question is referenced by the tracing code and so doesn't get
freed prematurely. I have observed this crash on two different target
platforms (mips and x86_64), and it is reproducible on non-OpenWRT
distros by building isc-dhcpd using --disable-tracing.
This has been reported to ISC, but their response was that it's a low
priority as the simple work-around is to leave tracing enabled.
Re-enabling the tracing code only increases the size of the executable
by about 24KB.
Signed-off-by: Heath Kehoe <yaheath@gmail.com>
Current version in OpenWrt (3.16.2) fails against the Arch Linux
in System Rescue CD's NBD as rootfs (to allow sharing ISO across
network). Based on resolved issues and web searching it seems
nbd had endianness issues (which affected my ath79 device).
This updates to 3.19 which allows System Rescue CD PXE boot with
NBD rootfs to work.
Removed patches no longer required due to upstream changes, and
added new configure option (--without-libnl) required to avoid
linking against full libnl and libnl-genl (if present in build).
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* change iptables whitelist target from 'ACCEPT' to 'RETURN'
to stop traversing the banIP chain and resume at the next chain
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Add patch that detects when -latomic is needed.
Fix compilation without deprecated OpenSSL APIs.
Hard-code lua to avoid luajit dependency.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Commit 32aaaaa led to failures when openwrt ARCH did not match kernel
ARCH, and this may not be its only side-effect.
This restores the previous Build/Compile and Build/Install, using the
default ones only when using external toolchain; in this case, ARCH is
set to LINUX_KARCH.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Two seperate package names were chosen instead of menu selected options
because dependents need a ready (large) package in release directory.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Expressions '-o', '-a', and '\( \)' within test or '[ ]' are obsolete.
POSIX allows few arguments to test, so long expressions are not
portable. '[ p -a q ]' can be replaced with '[ p ] && [ q ]' instead.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
This removes radicale-py2, the Py2 variant, and renames radicale-py3 to
radicale.
This also makes a number of changes:
* Actually use the Python package build system (from python3-package.mk)
* Download source from PyPI instead of GitHub git repo
* Remove unnecessary PKG_DEFAULT_DEPENDS definition
* Depend on python3-urllib instead of python3-email (now that urllib is
separate from python3-light and has python3-email as a direct
dependency)
* Move package description from menuconfig help to the actual
description field
* Remove unnecessary preinst script (default prerm will stop the
service now that the package name matches the init.d script name)
* Remove unnecessary lib/upgrade/keep.d entry (changed conffiles are
preserved by sysupgrade by default)
* Remove unnecessary postinst script (Python build system will set the
correct shebang)
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
libevhtp 1.2.18 made API changes, and unbundled oniguruma.
To adapt seafile-server, some patches from Alexandre Rossi's debian
packaging at http://sousmonlit.zincube.net/~niol/repositories.git/
were applied.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Instead, use @jow-'s suggestion of just checking for the presence of the
executables to find the installed web servers.
Fixes#8529.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Libevhtp is building a static library, used by seafile-server.
Every time the libevhtp binary changes, seafile-server needs a release
bump.
Leave a note in the libevhtp Makefile, as a reminder.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
The Makefile currently redefine the Compile and Install functions.
This is not working when using an external toolchain because some
flags are not interpreted, like CROSS_COMPILE. It is possible to
override the MAKE_FLAGS and MAKE_INSTALL_FLAGS instead.
Signed-off-by: Sébastien Blin <sebastien.blin@savoirfairelinux.com>
Update to latest stable release 5.54
Add new options ticketKeySecret and ticketMacSecret to uci validation.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Maintainer: me
Compile tested: armv7l, OpenWRT SDK
Run tested: armv7l Linksys WRT1900ACS, OpenWrt SNAPSHOT, r9987-655fff1571 -
confirmed dnsdist links correctly against dependencies and doesn't experience
errors at run-time when enabling features.
Description:
dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life is
to route traffic to the best server, delivering top performance to legitimate
users while shunting or blocking abusive traffic.
dnsdist is dynamic, its configuration language is Lua and it can be changed at
runtime, and its statistics can be queried from a console-like interface or an
HTTP API.
https://dnsdist.org/Closes: PowerDNS/pdns#3294
Signed-off-by: James Taylor <james@jtaylor.id.au>
Simplified the Makefile and fixes compilation with uClibc-ng. Also added
IPv6 support.
Took the time to clean up the Makefile with other useful options.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
BIND now requires POSIX thread and IPv6 support to build
Add filter-AAAA plugin
Remove unrecognized options
Remove patch that no longer needed
- 002-autoconf-ar-fix.patch
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* remove needless sort step to reduce system load
* change maxqueue default in backend and LuCI frontend
to '4' to reduce (default) system load
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Major new release of mosquitto.
This release rolls up the initial 1.6.0 release, plus the subsequent
build/bug fixes of 1.6.1 and 1.6.2.
Original upstream changelogs:
https://mosquitto.org/blog/2019/04/version-1-6-released/https://mosquitto.org/blog/2019/04/version-1-6-1-released/https://mosquitto.org/blog/2019/04/version-1-6-2-released/
Major features of interest:
* MQTTv5 support
* performance improvements
* ALPN support
* OCSP staping support
* OpenSSL Engine support
* TLSv1.0 support dropped
Currently adds two patches to continue supporting OpenSSL engine support
being disabled, and a missing header include. These are both tracked
upstream and are expected to be dropped in a subsequent release.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Commit b32f8d4ff0 broke compilation
of Subversion on systems where unixodbc package is present.
This partial revert fixes issue #8975.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
gnunet-reclaim-sqlite is no more in 0.11.4.
Also remove duplicate files also contained in gnunet-utils package.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Plugin options are properties of shadowsocks deployment as a whole,
including both server and each client components. Multiple client
instances accessing the same server will need to share the same plugin
settings
With this change, plugin options will need to specified to "server" and
"ss-server" section, not to each component section.
Fixes: c19e949 ("shadowsocks-libev: add plugin options support")
Reference: https://github.com/openwrt/packages/issues/8903#issuecomment-489674137
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Add a package for the Semtech lora-gateway-hal.
This package includes three sub packages which
are libloragw, lora-gateway-tests and lora-gateway-utils.
Signed-off-by: Xue Liu <liuxuenetmail@gmail.com>
- update to 1.0.77
- apply patches from Rosen Penev for compatibility with uClibc-ng
- add an option for rotation_rate selection
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
It seems ever since the switch to uClibc-ng, this builds perfectly fine.
Moved PKG_MAINTAINER variable for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Since no Python packages are produced by this package, including
python-package.mk is unnecessary.
This removes the reference to python-package.mk. (PKG_RELEASE is
unchanged as this should have no effect on the build.)
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
