Disable udev hwdb support instead of depending on eudev. This restores
the old behavior of pciutils. It never depended on udev.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* update midnight commander to latest stable release
* refresh subshell patch to support minimal openwrt environment
* switch to sha256 based package fingerprint
* compile & functional tested with ar71xx and x86
Signed-off-by: Dirk Brenken <openwrt@brenken.org>
One of the most common uses of the rtl-sdr suite on OpenWrt is to stream
data to a remote analyzer. This commit creates a /etc/init.d/ and
/etc/config entry for rtl-tcp, so that it can automatically launch on
startup.
Signed-off-by: Mike Miller <github@mikeage.net>
The network plugin has the option of encrypting traffic; add a
config option to allow enabling encrypting network plugin traffic.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Conflicts:
utils/collectd/Makefile
Standard LXC autostart is currently not working in OpenWrt,
therefore add our own autostart mechanism for now.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
$(CP) was defined as `cp -fpR' since the very begining of OpenWrt build
system (2006-06-22). The -R option should be enough and base packages
use only $(CP) for the same purposes just fine and BSD manual of cp also
discourages the use of `-r' option. So let's just tidy up the usage now.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
- Adds bcm43xx-3wire variant.
- Resets UART speed after firmware download.
- Prints chip name when firmware isn't found for bcm43xx.
- Increases timeout for bcm43xx.
- Moves bcm43xx firmware to lib.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
While an empty led_sysfs definition works as intended (no LED state is
touched), an error message is generated, since the appropriate sysfs
interface does not exist:
Sat Feb 27 16:42:55 2016 user.err wifitoggle: led: not found
This patch makes sure that no such error message will be generated.
Signed-off-by: Karol Babioch <karol@babioch.de>
dump1090 doesn't detect cross-compilation; instead, they check uname.
For OpenWrt, the target will always be Linux, so just forcibly set it.
Signed-off-by: Mike Miller <github@mikeage.net>
gitorious archive became available, so I could import the project
history from there into the new repo on github. Rebasing the changes
made since 2014 on top of the original git tree obviously caused
the commit hashes to differ.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
libcurl is added as dependency for gnupg-util to avoid a dependency
error.
The following invalid configuration options are removed:
--disable-ftp
--enable-fake-curl
Fixes: 0a61d56eb3 ("utils/gnupg: add new package gnupg-utils")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
eudev is a fork of systemd-udev which doesn't require all the
rest of systemd. It's suitable for running along with OpenWrt's procd,
eplacing the very outdated version of pre-systemd udev.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
eudev is a fork of systemd-udev which doesn't require all the
rest of systemd. It's suitable for running along with OpenWrt's procd,
eplacing the very outdated version of pre-systemd udev.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Update collectd, the backbone of Luci statistics, to 5.5.1
Refresh patches. Main changes:
- Remove 500-upstream-parallel-build-fix.patch (implemented upstream)
- Add 600-fix-libmodbus-detection.patch to revert an upstream change
that broke libmodbus detection in collectd's configure script
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
--with-perl-bindings= is insufficient, --without-perl-bindings is required
to actually prevent perl bindings when perl has been built for the target.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Picked up the old Makefile at 4.2.
Upgraded at 4.3 (repo move to github now: https://github.com/plougher/squashfs-tools/)
Added musl compatibility.
Enabled LZ4 compression support by default
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The current package gnupg does not allow to receive keys due to
disable-exec, disable-hkp configuration.
The patch removes these switches. To avoid unduely increasing the package
size the helper executables are put into a new package gnupg-utils.
The version is bumped to 1.4.20 to avoid an error when receiving keys.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Current configuration creates empty evtable_*.h header which makes all
the input event appear as "Unknown (null) event".
The maintainer of the project submitted a patch to fix this issue:
https://github.com/wertarbyte/triggerhappy/commit/7e5abc6
Thanks to this version bump, the old OpenWRT patch can be removed.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Building unrar together with libunrar creates conflicts that can be fixed by
doing separate builds.
Closes https://github.com/openwrt/packages/pull/2060.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* backport a slightly modified subshell patch to stable 4.8.15
(see ticket: https://www.midnight-commander.org/ticket/2742)
* enable subshell support by default
Signed-off-by: Dirk Brenken <dirk@brenken.org>
This is a small fix to allow the package to compile with gcc5
Addition of the -std=gnu89 CFLAGS.
Small correction of the copyright date of file bandwidthd.init
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
bump version to 4.8.15
fix charset / utf-8 support
fix different warnings during startup
merge all configuration files in /etc/mc
enable internal editor & charset support by default
Signed-off-by: Dirk Brenken <dirk@brenken.org>
Addition of the bandwidthd-pgsql package variant that can save also
in a postgres database.
Modification of bandwidthd.config to have the default IP address
of an OpenWrt router (192.168.1.1)
Addition of a small OpenWrt logo in the logo.gif
Compile tested on CC and trunk (ar71xx and mvebu in both cases)
run tested on CC (ar71xx) and trunk (r47397 on mvebu)
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
/etc/collectd/conf.d is referenced in the default config so should be installed to prevent the following in syslog every boot:
Fri Oct 9 02:09:38 2015 user.emerg : configfile: stat (/etc/collectd/conf.d) failed: No such file or directory
Signed-off-by: Oliver Middleton <olliemail27@gmail.com>
sane-xxx backend packages are hidden packages with custom
config and CONFIG_ALL does not select them alone. Now
sane-backends depends on +ALL:sane-backends-all.
No existing ipk is affected as the changed package/sane-backends
does not exist as an ipk.
030-musl.patch was updated to be submitted upstream. However,
the added preprocessor #if are always true for OpenWRT and will
not change the resulting code.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
This package is currently in oldpackages. Add here to keep support for gpsd.
From oldpackages, this was bumped from 3.10 -> 3.15 and includes an upstream
patch to allow building with musl.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
to make the bridge work we need to run an askfirst instance on the ttyS.
additionally add the lua scripts needed to make REST work. this is really ugly
code but it works. i already cleaned up to the original code, but there are still
issues such as a new luci session being created for each request.
Signed-off-by: John Crispin <blogic@openwrt.org>
