* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
* removed test.sh script from package
Signed-off-by: Dirk Brenken <dev@brenken.org>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
* removed logd dependency, see #13820 for reference
Signed-off-by: Dirk Brenken <dev@brenken.org>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
Signed-off-by: Dirk Brenken <dev@brenken.org>
libudev-zero as well as libudev-fbsd have PROVIDES:=libudev . These
packages have nothing specific that requires one or the other.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If procd relaunches the ModemManager daemon after e.g. a crash, we
also want it to notify all cached hotplug events, or otherwise we
would end up leaving the daemon running without the full initial
processing done.
This change modifies the init script to include all the required init
commands as part of the procd instance command, so that procd launches
all of them on every respawn.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Boost headers try to include experimental/string_view when std is less
than c++17. This does not work ith libcxx where this header is not
present.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- DNS Flag Day 2020
(default EDNS buffer size changed from 4096 to 1232 bytes)
-- Added patch, which should be part of the next release
It fixes an issue while cross-compilation (I linked it in the commit
message with issue link)
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
When the ModemManager daemon is started by the init script, we're
explicitly calling mm_report_events_from_cache() so that all the
hotplug events that happened before that moment are properly notified
to the newly launched daemon.
This initial reporting of events does a wait for the ModemManager
process to be available in DBus, and if the daemon isn't registered in
the bus in a given time, the process is considered failed:
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:03 2020 [2180]: <info> ModemManager (version 1.14.6) starting in system bus...
Sun Sep 6 16:20:03 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:04 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: error: couldn't report initial kernel events: ModemManager not running
Update the default wait time for this initial event notification from
10s to 60s, because there are cases where the daemon is slower to
boot, e.g. during the first boot after a sysupgrade.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Extend configuration of NTP sources in UCI:
- Add nts option to enable NTS
- Add disabled option to allow inactive sources
Add nts section to UCI with:
- rtccheck option to disable certificate time checks on systems that
don't have an RTC to avoid the chicken-and-egg problem (it is less
secure, but still should be better than no NTS at all)
- systemcerts option to disable system certificates
- trustedcerts option to specify path to trusted certificates
Save NTS keys and cookies by default to avoid unnecessary NTS-KE
sessions when restarted or switching back to an already used NTS source.
Also, save the drift to stabilize the clock after chronyd restart.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
- Use the chronyc onoffline command to update state of all sources
per current routing configuration
- Don't ignore the "ifupdate" action
- Add NTP servers from DHCP for the interface that went up instead of
the wan4+wan6 interfaces
- Save the servers to files loaded by the sourcedir directive to not
lose them when chronyd is restarted, and remove them when the
interface goes down
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
Instead of loading /etc/chrony/chrony.conf from the file generated from
the chrony UCI configuration, use the confdir directive in the main
config to load the generated file. This should make it obvious that
chrony is configured in UCI and it can also be easily disabled.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
If relay/bridge support isn't required, this variant is about 300 kiB smaller
than the full tor daemon.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Extracted from:
http://deb.debian.org/debian/pool/main/i/ifstat/ifstat_1.1-8.1.diff.gz
Note that I also created a new git repository with these fixes:
https://github.com/matttbe/ifstat/
The original author of these modification is:
Goswin von Brederlow <goswin-v-b@web.de>
ChangeLog:
* snmp.c: fix 2 pointer targets differ in signedness warnings
* Adding upport for 64bit /proc/net/dev counters.
* Clean up compiler warnings.
More modifications are available in the patch from the Debian project
but mostly related to the "debian" dir, man page and debug mode. Here I
only took the modifications related to the .c and .h files.
The most important fix is related to the support for 64bit counters in
/proc/net/dev instead of displaying 0 after a while.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
- support trailing route space from iproute2
- add routes even when iface is down
- fix source_routing argument check
- add quotes in logging to better detect issues with trailing spaces
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Contains following list of changes:
ab4c3471b261 tests: add cram based unit tests
7b4e3241e1bd tests: add cgi-io built with clang sanitizers
21831f45d16d Disable session ACLs during unit testing
2f525417b5df Add initial GitLab CI support
57f1c4f18cb6 Add .gitignore
09f9ac5066ee Fix off-by-one in postdecode_fields
ed8ce0d5d28b Add fuzzing of utility functions
a61581819800 Add fuzzing of multipart_parser
6b0615b728ed Refactor utility functions into static library
a0ed2c9a7a72 Fix clang compiler errors
232659da19a4 Fix possible NULL dereference
8e5719b37a67 Fix warnings reported by clang-10 static analyzer
b99aa8a64cca Remove Makefile
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Allows the Makefile to be cleaned up and to have fewer dependencies.
There's no need for multiple TLS libraries to be installed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
openconnect v8.10 supports 4 VPN protocols
--protocol=anyconnect Compatible with Cisco AnyConnect SSL VPN, as well as ocserv (default)
--protocol=nc Compatible with Juniper Network Connect
--protocol=gp Compatible with Palo Alto Networks (PAN) GlobalProtect SSL VPN
--protocol=pulse Compatible with Pulse Connect Secure SSL VPN
This patch allows user to specify protocol use the new "vpn_protocol"
option and deprecate the old option "juniper" which seems to be missing in
the current openconnect client.
Signed-off-by: Mengyang Li <mayli.he@gmail.com>
version 8.2.6 (October 19, 2020):
- try and address license concerns with LICENSE.md
- replace usleep with nanosleep (Rosen Penev <rosenp@gmail.com>)
- console: Add 'k' option to exit on console-down (Mylène Josserand <mylene.josserand@collabora.com>)
- Fix#48 - apply ipv4 CIDR access list when compiled with ipv6 support
Signed-off-by: Bjørn Mork <bjorn@mork.no>
The additional directory is created and can be used e.g. for configurations
which are created e.g. dynamically from an uci config.
Signed-off-by: Helge Mader <ma@dev.tdt.de>
For applications writing their own xinetd configuration to the /etc/xinetd.d
directory it would be necessary to save them (e.g. a user edits them manually)
Signed-off-by: Helge Mader <ma@dev.tdt.de>
When the interface section was changed, the changed configuration
options were not applied.
This commit adds the service reload handling again.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* switch all safesearch providers to dynamic ips (derived from cname)
* made the new safesearch approach compatible with bind-nslookup
* removed 3.x config compatibility code
Signed-off-by: Dirk Brenken <dev@brenken.org>
Django 3.1 supports relative paths for static_url.
Use it to make it more flexible.
Minor fixes for upgrade:
* ignore-fail-on-non-empty for rmdir /usr/share/etesync-server/etesync_server
* do not stop service (it is stopped already and init file is removed)
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
The underlying `acme.sh` allows custom ACME server URLs (using `--server`). Adding the necessary field to specify a custom ACME server URL from UCI.
Signed-off-by: Jannis Pinter <jannis+openwrt@pinterjann.is>
Use "mwan3 use" to wrap a command with interface bindings so that you can
avoid the mwan3 rules and test behavior on a specific interface.
eg "mwan3 use wan ping -c1 1.1.1.1"
Additional binding arguments to the command will have their system
calls intercepted and ignored.
eg "mwan3 use wan ping -c1 -I tun0 1.1.1.1" will use the
device associated with "wan", rather than "tun0".
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Rather than using a special mwan3 user to manage mwan3track's tracking
packets, this commit implements a small helper library to bind to
device and to set a fwmark so that the tracking packets can be routed
out of the correct interface.
This provides a consistent method for binding to a device rather than
relying on various packages potentially buggy implementations. For
example: #8139 and #12836
This helper issue also allows for more tracking methods to be added
even if they do not have a command line option to bind to device,
such as iperf3 (eg #13050).
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
start all mwan3mon and mwan3track instances on mwan3 start
if an interface is down when mwan3track starts, it waits
for a signal from the hotplug script to start
procd can then handle stopping all of the scripts when mwan3
is halted
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
correctly terminate interface status checks with new lines so that
interface status does not get confused when one interface is a prefix
of another interface.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
handle creation of routing tables in mwan3rtmon to avoid race
conditions and potentially missing routes
handle ipv6 routes that have expiry
update directly connected ipset when routes are added or deleted
add fall through rules so that the default routing table is not
used if no rule in the interface-specific routing table matches
add option to comply with mwan3 source based routing
get default route parameters from main routing table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Remove paxctl stuff. pax is not packaged in OpenWrt.
Add reload support.
Install lua cfg file as 644. It's needed to be readable as prosody user
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Change KEY/HMAC_KEY to __CHANGEME__, which is rejected by fwknopd
during start-up. The value CHANGEME is used only by LuCI package
luci-app-fwknopd - pull request for generating keys directly from
LuCI has been created already.
* Add sensible defaults for ENABLE_IPT_FORWARDING and ENABLE_NAT_DNS,
which both are/were set by luci-app-fwknopd. Move the defaults here.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
The substring "release_" does not reflect the version number.
In addition, package names will be shorter.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
mbedcrypto should be searched, not mbedtls. Also, there is no pkgconfig
file with mbedtls. Fixed that as well. Removed Makefile hacks.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
No functional changes, just moved the sources into out of tree
project[1] so it's going to be easier to do CI with unit testing,
fuzzing etc.
1. https://git.openwrt.org/?p=project/cgi-io.git;a=shortlog
Signed-off-by: Petr Štetiar <ynezz@true.cz>
AdGuardHome is a network-wide ads and trackers blocking DNS server.
After installing it with opkg, start it like every service:
/etc/init.d/adguardhome start
In order to complete the installation vist http://{YOUR_ROUTERS_IP}:3000.
Then you can setup dnsmasq to forward DNS traffic to AdGuardHome:
uci -q delete dhcp.@dnsmasq[0].server
uci add_list dhcp.@dnsmasq[0].server=127.0.0.1#{PORT_SET_DURING_INSTALL}
uci set dhcp.@dnsmasq[0].noresolv=1
uci commit dhcp
/etc/init.d/dnsmasq restart
Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
If lighttpd loads mod-auth, it also automatically tries to load
mod-authn_file, and fails if it's not available. That is a compatibility
feature of lighttpd after the funtionality was split into modules.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
* fix a vpn/iptables race condition
* remove needless dnsmasq dependency
* synchronize code-base of all auto-login scripts, due to
COVID-19 restrictions all of them are still untested/WIP
* various small cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
This meta-package contains only dependencies for modules needed in
FreeRADIUS default configuration.
This commit adds missing description and install sections.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
The provider could also be read from the custom directory. To get always
the latest version of the provider config json file, we read first the custom
directory and after that we also check the default directory, if we could not
find the provider file
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Since we can also install custom ddns services, the name for the default
services is not optimally chosen. To emphasize this the folder with the
standard services for the package feed will be renamed to default.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If we install ddns-scripts we also install the default
ddns-scripts-services package. So the behabviour for the user does not
change.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This package does not currently compile.
This is needed to do so that it compiles:
- fix emptying CXX variable in configure script
- fix automake not generating Makefile (remove doxygen definitions)
- force gnu++11 by patch, does not work with configure variable
Also because of changed API in libmicrohttpd:
- fix HttpServer
Moreover this package does not support --disable-slp configure option
anymore, remove it.
Signed-off-by: Marek Behún <kabel@blackhole.sk>
Note:
Fixes CVE-2020-1472 in case smb.conf
contains 'server schannel = no' or 'server schannel = auto'
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
Since we no longer need to edit the service and serive_ipv6 files during
installation, the preinst and postinst script can be removed. They are
not neede anymore.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
From my point of view there are several reasons why this uci default
script should be deleted.
- This script is no longer maintained and there was no significant
change since the old stable release openwrt-18.06.
- The script is installed with every additional package. Which is kind
of funny. It would be better to maintain a separate uci default upgrade
script for each package. So uci default tasks that are no longer needed
can simply be deleted without having to watch and test the whole scirpt.
- The script is also not so easy to maintain, because the code is not
easy to read.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Stan Grishin <stangri@melmac.net>
shellchecked
Signed-off-by: Stan Grishin <stangri@melmac.net>
shellchecked
Signed-off-by: Stan Grishin <stangri@melmac.net>
- new package dependency: curl (plus one of the wpad variants)
- optional package dependencies:
- 'msmtp' for email notification support
- 'wireguard' or 'openvpn' for vpn support
- removed WEP support, only WPA/WPA2/WPA3 are supported!
- new, more robust setup wizard (CLI and LuCI)
- more robust captive portal detection
- randomize mac addresses with every uplnk connect
- automatic vpn handling during uplink switch (only classic/simple
client-setups for wireguard or openvpn are supported)
- email notifications after successful uplink connections
- automatically disable uplinks after n minutes, e.g. for timed
connections
- automatically (re-)enable uplinks after n minutes, e.g. after failed
login attempts
- complete LuCI rewrite - migrated to client side JS (separate PR)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Don't build the sntp binary and libevent2-pthread dependency unless
ntp-utils is selected.
Re-add ntp-keygen dependency libevent2-core.
Fixes openwrt#10307
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
With openwrt/openwrt@51ec51871f one can
now use user/group names instead of numeric uid/gid in FILE_MODES.
Make use of that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Apart from adapting to upstream changes also switch to use FILE_MODES
instead of chown/chmod in init-script.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* update to 4.12.6
* fix optional modules not included on module build (vfs_btrfs, vfs_linux_xfs_sgid)
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Change URL to codeload. It redirects to it anyway. I was getting a 404
error with the original. I couldn't figure it out.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- remove patch that has been included upstream
- remove dependence on resolveip
- remove hotplug script that is handled by "proto_add_host_dependency"
- use openfortivpn default tunnel ip if none specified
- add status checking with uclient-fetch
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
If a daemon listens on multiple addresses at once, it'll show up multiple
times in get_listeners() which will clobber the config for uhttpd. Fix this
by skipping subsequent handlings of the same daemon binary.
Fixes#13325.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Update to 40.89.244.237 which is the new IP address that duckduckgo.com is using for safe-search.
Signed-off-by: Greg Dietsche <gregory.dietsche@cuw.edu>
The creation of the dummy package nginx creates some problem with dependency detection for the all-module variant. Reorganize the dependency and compile nginx before the the sub-variant.
Fixes#13275
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Canonical radtest start results in an error:
$ radtest bob hello localhost 0 testing123
/usr/bin/radtest: line 1: hostname: not found
(0) Error parsing "stdin": Failed to get value
hostname command is not present in OpenWrt.
Instead, hostname can be obtained from file /proc/sys/kernel/hostname.
added: 004-get-hostname-from-proc-in-radtest.patch
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
radtest utility is used in many manuals to check the operation of
radius server.
At the moment all parameters must be specified at startup, for example:
$ radtest bob hello localhost 0 testing123 0 localhost
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
Support for kernel 4.14 has been removed in main repo, so drop the
dependencies here as well (and those for even older 4.9).
Also drop a patch that is required only for 4.14 and lower.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Since support for kernel 4.14 has been removed, kmod-sched-cake-oot
is gone, and the kmod-sched-cake-virtual package is not needed
anymore.
This effectively reverts 9114244fbd ("sqm-scripts: Switch sch_cake
dependency to new virtual package")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This also removes PKG_BUILD_PARALLEL:=0 that was added for packages that
use HOST_PYTHON3_PACKAGE_BUILD_DEPENDS.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This commit allows for UCI configuration of the "left=" and the
"mark=" values in a StrongSwan IPSec connection. This improves
VTI support and allows certain stricter connection scenarios.
Signed-off-by: Michael C. Bazarewsky <github@bazstuff.com>
openconnect may emit following error logs every minute when negotiating
with deployments forbidding usage of dtls
Thu Aug 27 04:11:59 2020 daemon.notice openconnect[12024]: DTLS handshake failed: Error in the push function.
Thu Aug 27 04:11:59 2020 daemon.notice openconnect[12024]: (Is a firewall preventing you from sending UDP packets?)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Required by ovn-ctl for stopping ovn ovsdb instances
This utility was introduced since 20.03.0 after the project was
maintained in its own repo
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Package libcurl is missing dependencies for the following libraries:
libzstd.so.1
Previous patch by Hans Dedecker <dedeckeh@gmail.com> took the easy way
out :)
Suggested-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Tony Butler <spudz76@gmail.com>
[fixed title]
Signed-off-by: Paul Spooren <mail@aparcar.org>
Instead of using mbedtls by default use wolfssl. We now integrate
wolfssl in the default build so use it also as default ssl library for
curl.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport a commit from upstream curl to fix a problem in configure with
wolfssl.
checking size of time_t... configure: error: cannot determine a size for time_t
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move package over from openwrt.git based on the Hamburg 2019 decision
that non essential packages should be maintained in packages.git
Signed-off-by: Paul Spooren <mail@aparcar.org>
Several security issures are addressed:
- CVE-2020-8620 It was possible to trigger an assertion failure by sending
a specially crafted large TCP DNS message.
- CVE-2020-8621 named could crash after failing an assertion check in
certain query resolution scenarios where QNAME minimization and
forwarding were both enabled. To prevent such crashes, QNAME minimization is
now always disabled for a given query resolution process, if forwarders are
used at any point.
- CVE-2020-8622 It was possible to trigger an assertion failure when
verifying the response to a TSIG-signed request.
- CVE-2020-8623 When BIND 9 was compiled with native PKCS#11 support, it
was possible to trigger an assertion failure in code determining the
number of bits in the PKCS#11 RSA public key with a specially crafted
packet.
- CVE-2020-8624 update-policy rules of type subdomain were incorrectly
treated as zonesub rules, which allowed keys used in subdomain rules to
update names outside of the specified subdomains. The problem was fixed by
making sure subdomain rules are again processed as described in the ARM.
Full release notes are available at
https://ftp.isc.org/isc/bind9/9.16.6/doc/arm/html/notes.html#notes-for-bind-9-16-6
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Drops pid files, no longer needed with procd management.
Now properly reloads on reload_config after UCI changes.
Signed-off-by: Karl Palsson <karlp@etactica.com>
[ Fixed two shellcheck warnings and bump PKG_RELEASE ]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
The openfortivpn routes are a bit different than the standard ppp
routes so we need to handle them with a custom ppp-up script.
Gateway should not be set, and src should be set to the PPP local ip
address.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
fakepop is a fake pop3 daemon. It returns always the same messages to all users, it does not care about usernames and passwords. All user/pass combinations are accepted.
Signed-off-by: Marc Egerton <foxtrot@realloc.me>
Includes:
- dawn_uci: fix crashing when uci config is received
- tcpsocket: add option to add server ip
A new config option allows to add a server ip
option server_ip '10.0.0.2'
However, this server does not send anything back. Therefore it is not
possible to change the node configuration. This will probably be added
soon. The main goal of this commit is to allow monitoring of all nodes
in a network with DAWN, e.g. clients, channel utilization, ...
Also a network option (3) has been added which allows to use TCP but
not to announce your daemon in the broadcast domain. This allows you to
create a monitor-only node that holds only the local information and
forwards it to the central server.
A monitor-only node could be configured like
option server_ip '10.0.0.1'
option tcp_port '1026'
option network_option '3'
Another possible config is
option server_ip '10.0.0.1'
option tcp_port '1026'
option network_option '2'
Here, the node shares information with a central server, which can be
located outside the broadcast domain. Nevertheless, it also shares
information within its broadcast domain and can therefore perform
client steering.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Security release. From the changelog:
- In some circumstances, Mosquitto could leak memory when handling PUBLISH
messages. This is limited to incoming QoS 2 messages, and is related
to the combination of the broker having persistence enabled, a clean
session=false client, which was connected prior to the broker restarting,
then has reconnected and has now sent messages at a sufficiently high rate
that the incoming queue at the broker has filled up and hence messages are
being dropped. This is more likely to have an effect where
max_queued_messages is a small value. This has now been fixed. Closes
https://github.com/eclipse/mosquitto/issues/1793
Changelog: https://mosquitto.org/blog/2020/08/version-1-6-12-released/
Signed-off-by: Karl Palsson <karlp@etactica.com>
This patch makes it possible to configure and limit per-client internet
speed based on MAC address and it can work with SQM.
This feature is what OpenWRT currently lacks. This patch is largely based
on static.sh and the configuration file is similar to original nft-qos.
New configuration options and examples are listed below
config default 'default'
option limit_mac_enable '1'
config client
option drunit 'kbytes'
option urunit 'kbytes'
option hostname 'tv-box'
option macaddr 'AB:CD:EF:01:23:45'
option drate '1000'
option urate '50'
config client
option drunit 'kbytes'
option urunit 'kbytes'
option hostname 'my-pc'
option macaddr 'AB:CD:EF:01:23:46'
option drate '3000'
option urate '2000'
limit_mac_enable - enable rate limit based on MAC address
drunit - download rate unit
urunit - upload rate unit
macaddr - client MAC address
drate - download rate
urate - upload rate
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
improve startup and runtime performance by
1) moving common startup procedures out of hotplug script when called
from mwan3 start
2) reducing calls to iptables to check status of rules
3) consolidating iptables updates and updating with iptables-restore
4) do not wait for kill if nothing was killed
5) running interface hotplug scripts in parallel
6) eliminate operations in hotplug script that check status on every
single interface unnecessarily
7) consolidate how mwan3track makes hotplug calls
8) do not restart mwan3track on connected events
This is a significant refactor, but should not result in any breaking
changes or require users to update their configurations.
version bump to 2.9.0
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
In hash-checking mode[1], pip will verify downloaded package archives
(source tarballs in our case) against known SHA256 hashes before
installing the packages.
As a consequence, this requires the use of requirements files[2] and
pinning packages to known versions.
The syntax for package Makefiles has changed slightly;
HOST_PYTHON3_PACKAGE_BUILD_DEPENDS no longer accepts requirement
specifiers like "foo>=1.0", only requirements file names (which are the
same as package names in the most common case).
This also updates affected packages, in particular:
* python-zipp: "setuptools_scm[toml]" has been split into
"setuptools-scm toml" to reuse the requirements file for
setuptools-scm (the extra depends installed by "setuptools_scm[toml]"
is toml).
* python-pycparser: This previously used ply 3.10, whereas the
requirements file will now install 3.11.
[1]: https://pip.pypa.io/en/stable/reference/pip_install/#hash-checking-mode
[2]: https://pip.pypa.io/en/stable/user_guide/#requirements-files
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Setup user database if non-existent, configure uhttpd .php interpreter
and patch php scripts to work out-of-the-box.
Also ship Hotspot 2.0 SPP and OMA DM XML schema/DTD files needed at
run-time for both client and server.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
use only committed uci changes for updating routing table
use functions.sh functions rather than uci command line tool
to find interfaces for routing table.
consolidate rtmon_ipv4 and rtmon_ipv6 functions into a single function
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Add hs20-server and hs20-client packages correspoding to the
hs20/client and hs20/server folder in hostap.git.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* remove 'dshield' and 'sysctl' (discontinued)
* switch 'malwaredomains', 'shallalist' and 'winhelp' to https
* add a second regional list for poland (provided by matx1002)
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
Signed-off-by: Dirk Brenken <dev@brenken.org>
Added signal refresh rate option
modemmanager: update readme.md
Added description for added proto options.
Added compile option to compile --with-at-command-via-dbus for allowing
AT commands to modem without --debug flag
Changes to be committed:
modified: net/modemmanager/Config.in
modified: net/modemmanager/Makefile
modified: net/modemmanager/files/modemmanager.init
modified: net/modemmanager/files/modemmanager.proto
modified: README.md
Signed-off-by: Valtteri Holopainen <valtsu@gmail.com>
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.
Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.
Signed-off-by: Paul Spooren <mail@aparcar.org>
GCC10 defaults to -fno-common, which breaks compilation when there are
multiple definitions of implicit "extern" variables. Remove the extra
definitions.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
From CHANGES_2.4:
SECURITY: CVE-2020-11984 (cve.mitre.org)
mod_proxy_uwsgi: Malicious request may result in information disclosure
or RCE of existing file on the server running under a malicious process
environment. [Yann Ylavic]
SECURITY: CVE-2020-11993 (cve.mitre.org)
mod_http2: when throttling connection requests, log statements
where possibly made that result in concurrent, unsafe use of
a memory pool. [Stefan Eissing]
SECURITY:
mod_http2: a specially crafted value for the 'Cache-Digest' header
request would result in a crash when the server actually tries
to HTTP/2 PUSH a resource afterwards.
[Stefan Eissing, Eric Covener, Christophe Jaillet]
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
test_storage: fix compilation with musl 1.2.0
datastorage/test: improve scalability and performance
datastorage: fixed use of wrong client search
general: add memory auditing
memory auditing: bug fixes to memory auditing and hearing map
datastorage: fixes to linked list handling
tcpsocket: fix read callback function and arbitrary memory allocations
tcpsocket: leave loop if we read 0 byte
Furthermore, you can now dump the memory usage by sending a SIGHUP to
dawn process.
Signed-off-by: Nick Hainke <vincent@systemli.org>
This fixes misleading errors in the status file, and increases buffer
sizes to match the python implementation.
Signed-off-by: Karl Palsson <karlp@etactica.com>
At the moment ss-server seems to be the only component using these two
options. It also accepts "local_address" of either ip4 or ip6 address,
but the meaning is different from that of ss-local, ss-tunnel etc.
where it is for listen bind
With this commit, we start deprecation process of uci option
"bind_address". The name was replaced with "local_addr" in upstream
project commit 5fa98a66 ("Fix #1911") and available as json config
option "local_address". This upstream change was released in 3.2.0
Link: 4a42da641b
Link: https://github.com/openwrt/packages/issues/12931
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Config files
/etc/freeradius3/policy.d/accounting
/etc/freeradius3/policy.d/filter
/etc/freeradius3/proxy.conf
/etc/freeradius3/sites-available/default
and link
/etc/freeradius3/sites-enabled/default
are in the freeradius3 package and are mentioned in the main config file
/etc/freeradius3/radiusd.conf
Thus, they must be explicitly specified in the Makefile.
File
/etc/freeradius3/sites/default
is not included in the package, is not created during installation,
is not mentioned in the main config file and should therefore be excluded
from the Makefile.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
netifd is clever enough to handle the peerdns and default route
arguments, so we can just let them get passed along, and when
ppp-up invokes proto_send_update, netifd will only apply what
is needed
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Do not manually overwrite the paths of gdbus-codegen or glib-mkenums
in the ModemManager package build, as modifying the configure.ac ends
up requiring a full autoreconf.
Since MM 1.14, git builds or autoreconf-ed source package builds
require autoconf-archive installed in the build system, and so the
build would fail if this happens.
The update to overwrite the paths was to force using the gdbus-codegen
and glib-mkenums provided by the "host" glib2 package instead of the
"target" glib2 package (see fa8ad6e69c),
but these tools are really the same in both as they're python
programs, arch independent.
Tested in a local build where the setup detects and uses the correct
glib tool paths from the target:
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/gdbus-codegen
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/glib-mkenums
Fixes https://github.com/openwrt/packages/issues/12958
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
This is to make explicit the conditional select of libunwind is only
needed for libopenvswitch. If we spill it over other packages, the
generated kconfig will have recursive dependency issue. 2 new patches
were made for this goal
The other thing is that "+libunwind" will cause it to be built if any of the
packages defined in this Makefile is enabled (y or m). This is at the moment
by-design of the build system.
Libunwind does not support architectures like arc. Use conditional select To
avoid (libunwind) build failures like the following,
checking for ELF helper width... configure: error: Unknown ELF target: arc
make[3]: *** [Makefile:65: /data/openwrt/build_dir/target-arc_arc700_uClibc/
libunwind-1.3.1/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 1
Things like "+PACKAGE_openvswitch-libopenvswitch:libunwind" will also result in
recursive deps error for chains of 3 nodes. Kconfig construct like the
following will be made
config A
tristate
select B
depends on !(C) || (x)
config B
tristate
select C
config C
tristate
config x
bool
Other changes include
- Shared use of variable ovs__common_depends was removed
- Ovn doc build was patched out
Link: https://github.com/openwrt/packages/pull/12959#issuecomment-665021413
Reported-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Simplified Makefile as a result of meson transition.
Fixed license information.
Updated URL.
Added patch to fix linking issue.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If two openfortivpn scripts are started at the same time, a race
condition can occur where the conditional evaluates to true, but the
symlink exists by the time the other script tries to create it
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Block restart of the interface if the openfortivpn fails to authenticate.
Without this check, with a bad password, netifd will continually
hit the VPN endpoint with connection attempts
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Add a hotplug script to reload nlbwmon's config after interface
ifup actions.
That should improve the detection of the IPv6 LAN address
that can get enabled a bit later in the boot process.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit cde2a77ed3.
Applying this change has shown that it is even quicker to provoke the
race condtition on simultan mwan3 commands execution.
By reversing the change we have the same behaviour as before.
But the race condition on mwan3 execute at the same time still exists.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This adjustment of the locks fixes the race condition when a mwan3
hotplug script and a mwan3 command are running at the same time.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This new config section in package openvswitch
supports creating a named bridge, and setting
its' OpenFlow controller end-point.
An example config is included in /rom/etc/config/openvswitch
Signed-off-by: Simon Kinane <skinane@fb.com>
- New major version (LTS release)
- Update haproxy download URL and hash
- Remove obsolete dladdr1-dependency-patch as it has been upstreamed
- USE_REGPARM is obsolete and therefore removed from our Makefile
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Make the plain nginx version the same as nginx-ssl.
In a further change we will replace nginx by a dummy package,
depending on +nginx-ssl instead. This allows a smooth upgrade.
For nginx-util leave the ssl and the ssl-nopcre versions only.
For nginx-mod-luci remove the duplicate ssl version.
Replace the removed packages by dummies for a smooth upgrade.
The dummy packages will be removed after a transition period.
Additionally, enable the http2 module for nginx-ssl by default
and cleanup the nginx.init file.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
- Fixes CVEs:
CVE-2019-12519
CVE-2019-12520
CVE-2019-12521
CVE-2019-12523
CVE-2019-12524
CVE-2019-12525
CVE-2019-12526
CVE-2019-12527
CVE-2019-12528
CVE-2019-12529
CVE-2019-12824
CVE-2019-12854
CVE-2019-13345
CVE-2019-18676
CVE-2019-18677
CVE-2019-18678
CVE-2019-18679
CVE-2020-8449
CVE-2020-8450
CVE-2020-11945
CVE-2020-14058
CVE-2020-15049
- Remove patch for cross-compilation
The patch should not be included in the OpenWrt at all without any
commit message/description.
Is not needed and there should be used HOST variables instead of BUILD variables (e.g.
HOSTCXX)
However, the BUILDCXX is set in Makefile to HOSTCXX
- Renumber glibc patch and refresh it
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
If the uci option family is not set in the interface section, then there
is no default value set as in the `config_load / config_get` API.
The problem here is that if the family is not set, the default value ipv4
is normaly assumed. But the comparison fails here because the value is empty
and therefore the dedicated routing table for this interface is not compared
with the other routes from the main table and so not updated.
To fix this set the default value for this config option which is`false`
for enabled and `ipv4` for family.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This fixes routing handling. Introduced with the last version update.
The following message disappears on the shell
when mwan3 is called with 'mwna3 restart`.
`Error: Invalid gateway address.`
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
[aaronjg@stanford.edu: fully unset variable and handle ipv4 as well]
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
default rule only applied to ipv4 with dest_ip 0.0.0.0/0
and error was hidden when trying to apply it in ip6table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
allow use of curl rather than ping to test if a host
is up since a host may not respond to ping, but an
https request is part of the openfortivpn connection,
so this is a more reliable test
also clean up overly verbose logging
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Split musl patch into multiple small ones. Much easier to reason about.
Removed stack protector patch. This is not an issue anymore.
Removed NLS support. There seems to be a linking issue as
libiconv-stub does not have a shared library component.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Changed URL to new upstream.
Use PKG_INSTALL for consistency between packages.
Use PKG_BUILD_PARALLEL for faster compilation.
Remove outdated patch.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- prevent rapid overlap in DHCP script updates
- check and allow localhost forwards with specific applications
- add option for rate limiting inbound queries
- change UCI list to table format with Unbound conf references
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Includes:
- dawn_uci: no need uci_alloc_context on each uci_set_network call
- test_storage: extend test harness; datastorage: two bug fixes
- tcpsocket: free con after ustream write error and make list each safe
list_each is not safe against removal of list entry
Signed-off-by: Nick Hainke <vincent@systemli.org>
Simplifies the Makefile and allows faster compilation with Ninja.
Added patch to fix libmariadb dependency.
Added extra modules.
Speed Before:
time make package/lighttpd/compile -j 12
Executed in 47.91 secs fish external
usr time 41.83 secs 384.00 micros 41.83 secs
sys time 10.79 secs 37.00 micros 10.79 secs
Speed After:
time make package/lighttpd/compile -j 12
Executed in 19.67 secs fish external
usr time 42.79 secs 377.00 micros 42.79 secs
sys time 8.56 secs 37.00 micros 8.56 secs
Tested with fish shell.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Since we use now procd for xinetd, we have to start the service with the
option `-dontfork` to make procd happy.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
It seems even modern stuff doesn't support v2 correctly. The miniupnp
suite does but other stacks seem to lack support. Default to v1 to
avoid the headache.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added PKG_LICENSE_FILES.
Added PKG_BUILD_PARALLEL for faster compilation.
Simplified configure arguments.
Small cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Due to a missing config load function call, mwan3 start runs ifup for an empty
list of interfaces, thus not calling ifup at all.
This commit introduces the missing config_load call.
Signed-off-by: Michiel Blokzijl <code@m01.eu>
The init file of darkstat is creating the pid in /var/empty and
setting the owner of the directory to darkstat which is incompatible
with sshd as sshd requires /var/empty to be owned by root and not
group or world-writable. See issue #12420.
This corrects the problem by creating another directory: /var/darkstat
instead without setting the owner, which is not actually required.
Compile tested: not applicable as the changes do not involve
compilation.
Tested on my home router running darkstat.
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
Tidy up some minor patch fuzz with a refresh.
Also tweak the linux makefile to make it run on macosx and linux:
install only understand -m for filemode, not that the openwrt staging
dir understands file modes. Also glibc>2.17 so patch out the check that
otherwise barfs a number of errors from a missing 'ldd' command under
macos.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
When listening to a udp port an Illegal instruction occurs.
This did NOT happen when compiled with debug on.
Fixes issue openwrt#4747, FS#2937
Signed-off-by: Rick Frankland <rfrankla@yahoo.com>
This adds PKG_BUILD_PARALLEL:=0 to packages that depend on host Python
packages (HOST_PYTHON3_PACKAGE_BUILD_DEPENDS), because installing
packages with multiple concurrent pip processes can lead to errors or
unexpected results[1].
This also:
* Move HOST_PYTHON3_PACKAGE_BUILD_DEPENDS definitions to before
python3-package.mk is included
* Update Python folder readme to include PKG_BUILD_PARALLEL:=0
[1]: https://github.com/pypa/pip/issues/2361
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Jool v4.1.0 suffers from bad offload management as well as broken
stateful NAT64 translation. See upstream issues #331 as well as #332 for
more information.
Downgrade to v4.0.9 until these are ironed out.
Tested on: ipq40xx-generic
Fixes commit 0a6891feac ("jool: update to v4.1.0")
Signed-off-by: David Bauer <mail@david-bauer.net>
As miniupnpd is running as root, libcap(-ng) can be used to limit its
capabilities.
libcap-ng is very small, so this isn't a problem.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The two unique packages "Unbound light" and "Unbound heavy"
were not working well due to the fact that Unbound is mostly
its library. Tools and helpers would crash. Instead a reasonable
default Unbound is built. Also up select options like python
are added. libevent and libpthreads are options to down select.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Disable several options to enable compilation.
Simplified several configure options.
Remove pointless configure var.
Added ssh hinting patch. Some SSH incompatibility.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Use the newly introduced configure script.
Use PKG_INSTALL for consistency between packages.
Use PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
