With this change it is now possible to combine interface action events.
If an interface action is generated by netifd or mwan3 for example ifup,
ifdown, connectd or disconnected and this action is configured in the inteface
uci section, then the conntrack table is flushed by mwan3.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This fixes a crash that happens when dhcpd is configured with a failover
peer, and the failover peer goes down. The crash is due to a dereference
of a freed object. When tracing is enabled (which is the default) the
object in question is referenced by the tracing code and so doesn't get
freed prematurely. I have observed this crash on two different target
platforms (mips and x86_64), and it is reproducible on non-OpenWRT
distros by building isc-dhcpd using --disable-tracing.
This has been reported to ISC, but their response was that it's a low
priority as the simple work-around is to leave tracing enabled.
Re-enabling the tracing code only increases the size of the executable
by about 24KB.
Signed-off-by: Heath Kehoe <yaheath@gmail.com>
Current version in OpenWrt (3.16.2) fails against the Arch Linux
in System Rescue CD's NBD as rootfs (to allow sharing ISO across
network). Based on resolved issues and web searching it seems
nbd had endianness issues (which affected my ath79 device).
This updates to 3.19 which allows System Rescue CD PXE boot with
NBD rootfs to work.
Removed patches no longer required due to upstream changes, and
added new configure option (--without-libnl) required to avoid
linking against full libnl and libnl-genl (if present in build).
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* change iptables whitelist target from 'ACCEPT' to 'RETURN'
to stop traversing the banIP chain and resume at the next chain
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Add patch that detects when -latomic is needed.
Fix compilation without deprecated OpenSSL APIs.
Hard-code lua to avoid luajit dependency.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Commit 32aaaaa led to failures when openwrt ARCH did not match kernel
ARCH, and this may not be its only side-effect.
This restores the previous Build/Compile and Build/Install, using the
default ones only when using external toolchain; in this case, ARCH is
set to LINUX_KARCH.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Two seperate package names were chosen instead of menu selected options
because dependents need a ready (large) package in release directory.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Expressions '-o', '-a', and '\( \)' within test or '[ ]' are obsolete.
POSIX allows few arguments to test, so long expressions are not
portable. '[ p -a q ]' can be replaced with '[ p ] && [ q ]' instead.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
This removes radicale-py2, the Py2 variant, and renames radicale-py3 to
radicale.
This also makes a number of changes:
* Actually use the Python package build system (from python3-package.mk)
* Download source from PyPI instead of GitHub git repo
* Remove unnecessary PKG_DEFAULT_DEPENDS definition
* Depend on python3-urllib instead of python3-email (now that urllib is
separate from python3-light and has python3-email as a direct
dependency)
* Move package description from menuconfig help to the actual
description field
* Remove unnecessary preinst script (default prerm will stop the
service now that the package name matches the init.d script name)
* Remove unnecessary lib/upgrade/keep.d entry (changed conffiles are
preserved by sysupgrade by default)
* Remove unnecessary postinst script (Python build system will set the
correct shebang)
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
libevhtp 1.2.18 made API changes, and unbundled oniguruma.
To adapt seafile-server, some patches from Alexandre Rossi's debian
packaging at http://sousmonlit.zincube.net/~niol/repositories.git/
were applied.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Instead, use @jow-'s suggestion of just checking for the presence of the
executables to find the installed web servers.
Fixes#8529.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Libevhtp is building a static library, used by seafile-server.
Every time the libevhtp binary changes, seafile-server needs a release
bump.
Leave a note in the libevhtp Makefile, as a reminder.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
The Makefile currently redefine the Compile and Install functions.
This is not working when using an external toolchain because some
flags are not interpreted, like CROSS_COMPILE. It is possible to
override the MAKE_FLAGS and MAKE_INSTALL_FLAGS instead.
Signed-off-by: Sébastien Blin <sebastien.blin@savoirfairelinux.com>
Update to latest stable release 5.54
Add new options ticketKeySecret and ticketMacSecret to uci validation.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Maintainer: me
Compile tested: armv7l, OpenWRT SDK
Run tested: armv7l Linksys WRT1900ACS, OpenWrt SNAPSHOT, r9987-655fff1571 -
confirmed dnsdist links correctly against dependencies and doesn't experience
errors at run-time when enabling features.
Description:
dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life is
to route traffic to the best server, delivering top performance to legitimate
users while shunting or blocking abusive traffic.
dnsdist is dynamic, its configuration language is Lua and it can be changed at
runtime, and its statistics can be queried from a console-like interface or an
HTTP API.
https://dnsdist.org/Closes: PowerDNS/pdns#3294
Signed-off-by: James Taylor <james@jtaylor.id.au>
Simplified the Makefile and fixes compilation with uClibc-ng. Also added
IPv6 support.
Took the time to clean up the Makefile with other useful options.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
BIND now requires POSIX thread and IPv6 support to build
Add filter-AAAA plugin
Remove unrecognized options
Remove patch that no longer needed
- 002-autoconf-ar-fix.patch
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* remove needless sort step to reduce system load
* change maxqueue default in backend and LuCI frontend
to '4' to reduce (default) system load
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Major new release of mosquitto.
This release rolls up the initial 1.6.0 release, plus the subsequent
build/bug fixes of 1.6.1 and 1.6.2.
Original upstream changelogs:
https://mosquitto.org/blog/2019/04/version-1-6-released/https://mosquitto.org/blog/2019/04/version-1-6-1-released/https://mosquitto.org/blog/2019/04/version-1-6-2-released/
Major features of interest:
* MQTTv5 support
* performance improvements
* ALPN support
* OCSP staping support
* OpenSSL Engine support
* TLSv1.0 support dropped
Currently adds two patches to continue supporting OpenSSL engine support
being disabled, and a missing header include. These are both tracked
upstream and are expected to be dropped in a subsequent release.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Commit b32f8d4ff0 broke compilation
of Subversion on systems where unixodbc package is present.
This partial revert fixes issue #8975.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
gnunet-reclaim-sqlite is no more in 0.11.4.
Also remove duplicate files also contained in gnunet-utils package.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Plugin options are properties of shadowsocks deployment as a whole,
including both server and each client components. Multiple client
instances accessing the same server will need to share the same plugin
settings
With this change, plugin options will need to specified to "server" and
"ss-server" section, not to each component section.
Fixes: c19e949 ("shadowsocks-libev: add plugin options support")
Reference: https://github.com/openwrt/packages/issues/8903#issuecomment-489674137
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Add a package for the Semtech lora-gateway-hal.
This package includes three sub packages which
are libloragw, lora-gateway-tests and lora-gateway-utils.
Signed-off-by: Xue Liu <liuxuenetmail@gmail.com>
- update to 1.0.77
- apply patches from Rosen Penev for compatibility with uClibc-ng
- add an option for rotation_rate selection
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
It seems ever since the switch to uClibc-ng, this builds perfectly fine.
Moved PKG_MAINTAINER variable for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Since no Python packages are produced by this package, including
python-package.mk is unnecessary.
This removes the reference to python-package.mk. (PKG_RELEASE is
unchanged as this should have no effect on the build.)
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
For some reason, several C++ headers are not included. Include them.
Also added const fixes to get it to build with uClibc++.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This change changes the maintainer to
`Alexandru Ardelean <ardeleanalex@gmail.com`
for all Python packages owned by
`Gergely Kiss <mail.gery@gmail.com>`
No functional changes.
Bumping PKG_RELEASE on each package that is updated.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The code was all there but the call do the function containing it was missing,
so call the function so that forced (UPS) shutdown occurs on a battery critical
or manually requested FSD situation.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
NUT's upsmon is rather peculiar in that it has a child process that runs as
a regular user and a parent process that runs as root (in order to facilitate
shutting down the device if needed). procd doesn't deal well with this and
doing 'normal' procd stop / restart / etc results in the child process still
hanging around but with not parent, which causes undesired behaviour. Therefore,
add the use of 'upsmon -c stop' during process shutdown / restart in order to
ensure that upsmon is actually fully stopped.
Also fixes nut-monitor going into crashloop on network changes (due to
trigger that restarted upsmon but failed due to orphan child from before
restart).
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Reorganized and cleaned up Makefile for consistency between packages.
Disabled relro and pie. The build system already handles those.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
busybox ps and procps-ng ps have different outputs. Force busybox ps usage
to fix this.
Also cleaned up the script using shellcheck.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
By default the buildbot does not build the bindings and thus misses this.
The BUILD_DEPENDS is totally broken. Removing the + sign should fix it.
The SWIG directories are wrong. Fix them.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This change removes a series of Python packages that are added to
seafile-seahub and are not needed.
After some investigation into seafile, there are no references for it.
These are some of the low-hanging fruits.
They're not used [not sure when they were], and these packages were born
out of some weird sprints somewhere and forgotten on web and left
un-maintained.
So, remove them.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Some of these hacks were needed when uClibc++ was used. Now that it is not
we can remove them.
Remove libpthread dependency. Not only is it unneeded, package-defaults
already specifies it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Old API compatibility was kept with a compatiblity shim.
Detect wget --timestamping support to make it compatible with
uclient-fetch implementation of wget.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
remove building kernel module, it is not used and is not working with 4.19
rework the ready to use l2tp-ipsec example
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Avoid Hetzner hosted servers due to availability (.ru users)
and try to keep availability as good as possible without
sacrificing performance for the majority of users.
Update upstream project download URL
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Switched to CMake. This allows getting rid of several patches and hacks.
Added PKG_LICENSE information
Rearranged some stuff for consistency between packages.
Added some linked flags for smaller size. Saves around 500 bytes on MIPS.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Refreshed patch.
Added PKG_LICENSE_FILES.
Added --as-needed linker flag for slightly smaller size.
Removed -O2 hack to get it to compile. As part of this, removed a bunch of
CFLAGS that are normally passed which potentially affect compilation with
Os.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Bruno Pena <brunompena@gmail.com>
tac_plus: Updated to the latest commit from upstream. Updated URL to reference Facebook's GitHub repository. Tweaked Makefile to include the date on the source package filename.
Signed-off-by: Bruno Pena <brunompena@gmail.com>
1.) Fix the handling of XTinyproxy option to avoid syntax error when starting tinyproxy:
example:
Syntax error on line 15
Unable to parse config file. Not starting.
Signed-off-by: Mathieu Coupe <eagle.pounains@gmail.com>
The protobuf 3.7 update broke ola due to API changes. Backported a few
patches from upstream to deal with this.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Correct option is "password_file" not "passwd_file"
Originally reported as: https://github.com/openwrt/packages/pull/8642
Added the package bump.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Buildbots are failing on kea because kea/host is failing:
checking for OpenSSL library... configure: error: OpenSSL auto detection
failed
I'm guessing the buildbots do not have OpenSSL installed and the
configure script does not find the proper location for OpenSSL.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* add a 'Net Error Check' which treats a missing
internet availability as an error (disabled by default)
* add a 'List Auto Expiry' which automatically resets
the 'Faulty Stations' list after n minutes,
default is '0' which means no expiry (old behaviour).
* rework major parts of the check subroutine
* add both features to LuCI frontend (separate PR/commit)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Libreswan is a free software implementation of the most widely
supported and standardized VPN protocol based on ("IPsec") and
the Internet Key Exchange ("IKE"). These standards are produced
and maintained by the Internet Engineering Task Force ("IETF").
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
This is causing linking errors on i3486 and maybe other platforms. Linking
with LD does not seem to be very portable.
Also cleaned up the Makefile by getting rid of whitespace, HTTPS,
duplicated entries, etc...
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Remove libopenssl dep from NGINX_HTTP_CACHE and NGINX_HTTP_AUTH_BASIC config flag
The documentation doesn't mention that openssl is required for this 2 modules. This also permit to use nginx no-ssl variant without libopenssl as this 2 module are selected by default. Also make OPENSSL_ENGINE flag a dep to recompile nginx on change of openssl compilation flag.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
This patch updates the aircrack-ng package to their git revision
42f2b48d. This commit is the latest for the upcoming 1.6 release.
Signed-off-by: Joseph Benden <joe@benden.us>
There's a build race condition with other packages which sometimes results in:
Package libnetsnmp is missing dependencies for the following libraries:
libpci.so.3
Add ability to configure a static remote ip in pptp config file
This change has backward compatibility with old config files
Also remove the MAINTAINER as intructed
Signed-off-by: Thiago Pereira Ricciardi <thiago.ricciardi@gmail.com>
Kea is an open source DHCPv4/DHCPv6 server being developed by
Internet Systems Consortium. Kea is a high-performance, extensible
DHCP server engine that is designed to be easily modified and extended
with hooks libraries.
Kea is free open source, and we welcome community engagement, via the
Kea-users mailing list, this wiki, and our Github
repository. There is a small core team of dedicated software engineers
developing it and we need your contributions and support
contracts to support them.
DHCP Standardization efforts: The lead developer on KEA is
co-chair of the Dynamic Host Configuration working group in the
IETF. We are committed to providing a standards-compliant
implementation and are closely tracking developments in this working
group and evaluating them for inclusion in KEA.
wiki : http://kea.isc.org/wiki
official : https://www.isc.org/kea/
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
ENGINE_cleanup is unavailable when deprecated APIs and ENGINE support are
disabled. The cleanup functions are unnecessary with OpenSSL 1.1.
The getm functions use a faulty if directive. Work around it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Openssl 1.1.1 package in openwrt enabled more than just the devcrypto
engine, so the engine support in openssh should be enabled when general
engine support is enabled in openssl.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Added a dependency to OPENSSL_WITH_EC to prevent any build failures.
Switched URLs to HTTPS.
Added PKG_CPE_ID for proper CVE tracking.
Some Makefile reorganization for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Packages such as Perl, Lua, shell scripts don't generate binary files.
Add PKGARCH:=all to them.
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Django 1.11 is supported, but seafile-admin was still looking for v. 1.8.
Replaced current patch with the patch from haiwen/seafile-server#147.
Cleaned up unsupported configure options, including riak backend.
Check that the seafile-server version is the same as seafile-seanet's at
build time, removing the static EXTRA_DEPENDS check done at install
time.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Fixes compilation when both libbsd and ptunnel-ng are selected.
libbsd is used for arc4random with a fallback to /dev/random. musl does
not support arc4random.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
This also lets procd trigger the validation function directly, and
removes some unnecessary curly brackets.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Note: this should prevent wget to writing to /root/.wget-hsts
which can lead to flash memory degradation.
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
The variables can be empty if not set in the UCI config.
Reported-by: Petr Novák <petrn@me.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
This bug was introduced since dd206b7d0b
mwan3_remon_ipv4 and mwan3_remon_ipv6 is command to run not a variable
I add some comments on them hopefully people will notice it
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
The Go compiler can now manage the build dependencies by itself, as
obfs4proxy has been ported to a Go module.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* fix a json related ressource leak
* add a reload trigger when the wireless config gets changed
* set an interface default 'trm_wwan' (like the LuCI frontend)
* reordered nested loops to optimize the connection handling
Signed-off-by: Dirk Brenken <dev@brenken.org>
Yggdrasil builds end-to-end encrypted networks with IPv6. Beyond the
similarities with cjdns is a different routing algorithm. This
globally-agreed spanning tree uses greedy routing in a metric space.
Back-pressure routing techniques allow advanced link aggregation bonding
on per-stream basis. In turn, a single stream will span across multiple
network interfaces simultaneously with much greater throughput.
Authored by: William Fleurant <meshnet@protonmail.com>
Signed-off-by: Paul Spooren <mail@aparcar.org>
This one contains only a few CVEs + bugfixes.
* CVE-2019-8381 memory access in do_checksum() (#538)
* CVE-2019-8376 NULL pointer dereference get_layer4_v6() (#537)
* CVE-2019-8377 NULL pointer dereference get_ipv6_l4proto() (#536)
* Rename Ethereal to Wireshark (#545)
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
trafficshaper create QoS rules to limit (or reserve) traffic used
by classes of clients.
Uplink and downlink can be controled (or not controlled) independently.
Client classes are defined by its network addresses (IPv4 or IPv6). Each
client class can define absolute or relative (to wan) bandwith, and also
the use (or not) of spare wan bandwidth when avaiable.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Using shorewall-lite {en|dis}able instead of completely restarting
Shorewall is much more efficient.
But it also makes sense to move the starting of Shorewall from init
to an interface hotplug event. The "lan" interface should be a good
indicator that networking it ready. Besides, Shorewall won't start
until br-lan is available.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
When the server hostname resolved to both IPv4 and IPv6 addresses,
connecting would fail with nothing in syslog. This corrects that oversight.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* fix for #8357
* fix unexpectedy calling option_cb() during wireless config_load
* react immediately when the current active uplink connection
gets deleted
Signed-off-by: Dirk Brenken <dev@brenken.org>
The following patches are in upstream now
0100-netdev-linux-Use-unsigned-int-for-ifi_flags.patch
0103-ovs-ctl-fix-setting-hostname.patch
0106-ovs-save-compatible-with-busybox-ip-command.patch
0107-datapath-use-KARCH-when-building-linux-datapath-modu.patch
As for 0001-musl-compatibility.patch, the net/if_packet.h part does not
apply anymore. And musl is not relevant as we use libatomic from gcc
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* switch to git, until we can consume manual created source releases again
* Fix compilation without OpenSSL ENGINE
* remove unnecessary stop_service() triggers
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* add patch for tmsize overflow (https://bugzilla.samba.org/show_bug.cgi?id=13622)
* re-enable netbios by default
(Some users still need netbios and its just a minor size increase 50kb)
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Switch to v0.11 release sources (plus patches to still get it to build)
gnunet-social was out-sourced into a separate repository and hence
new OpenWrt package gnunet-secushare.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Before this change two disconnected events were generated. This is wrong!
The disconnected event is impliciet generated by the hotplug script on ifdown
event. The mwan3track script is notified by a USR1 signal which
generates the disconnectd event. The additional "disconnectd" event on
ifdown is not required.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
This also moves the generated config file to /var/etc and adds a
service_triggers() function.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This applies a patch from upstream that avoids a call to ENGINE_cleanup
when the openssl library was built without engine support.
A workaround for a missing header check was used to silence a warning
about the implicit definition of RAND_load_file. A proper fix has been
merged upstream as well.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
The speedtest-netperf.sh script measures the network throughput while
monitoring latency under load and capturing key CPU usage and frequency
statistics. The script can emulate a web-based speed test by downloading
and then uploading from an internet server, or perform simultaneous
download and upload to mimic the stress of the FLENT test program.
It simplifies tasks such as validating ISP provisioned speeds or setting
up and fine-tuning SQM, directly on the router. The CPU usage details
can also help determine if the demands of SQM, routing and other tasks
such as the test itself are exhausting the device's CPUs.
This script leverages earlier scripts from the CeroWrt project used for
bufferbloat mitigation, betterspeedtest.sh and netperfrunner.sh. They are
used with the permission of the author, Rich Brown.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* add captive portal domains automatically to the related
domain whitelist (dhcp option 'rebind_domain'),
if rebind protection/RFC1918 is enabled
Signed-off-by: Dirk Brenken <dev@brenken.org>
This updates the package to use the default PyBuild/Compile, instead of
defining a custom Build/Compile.
This also updates the source url and adds a src package.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This renames the Python 2 twisted package to python-twisted, and updates
dependents (i.e. obfsproxy) to reference the updated name.
This also fixes conflicts between the Python 2 and 3 packages. Twisted
installs some scripts to /usr/bin, and previously scripts for both
packages used the same names. This adds a "3" suffix to scripts
installed by python3-twisted.
This also adds python[3]-setuptools as a dependency, as the scripts
installed to /usr/bin depend on pkg_resources (part of setuptools).
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
When OpenSSL is built without deprecated APIs, pkg-config first tries
OpenSSL in the staging directory but fails as it cannot find the
deprecated SSL_library_init function and ends up finding the system one.
Added PKG_BUILD_PARALLEL for faster compilation.
Added -Wl,--gc-sections to LDFLAGS to save ~10KB from the resulting ipk.
Reworked configure section as some of those options were renamed or
removed.
Removed EXTRA_* hacks that are no longer necessary.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Using an external toolchain, it was discovered that net-snmp would
link with the Perl library (-lperl) from the host rather than from the
target.
Since we do not provide Perl as a dependency to net-snmp, the solution
is to disable support for it.
Fixes issue #8217.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
This is a minor bugfix release. Full changelog available at:
https://mosquitto.org/blog/2019/02/version-1-5-7-released/
Most relevant to OpenWrt are probably:
* fixing persistent store bloat
* fix sorting of included config files
* fix errors related to per_listener_settings
Signed-off-by: Karl Palsson <karlp@etactica.com>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
This also replaces space indentation with tabs, and removes trailing
whitespace and unnecessary curly brackets.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
