fix snapshot build err.
Add configure option "--enable-resolutionkms=no"
Can not build if libdrm and libudev exist.
Since resolutionkms is not used, it is avoided by disabling it.
Signed-off-by: Yuhei OKAWA <tochiro.srchack@gmail.com>
In collaboration with @dangowrt the server makes use of `ucert`. Active
workers sign created firmware and clients check if the signature is
valid. Certs of *hacked* or inactive workers can be revoked. Private CA
key is **not** stored on the upgrade server.
Only for devices already supporting ucert via firmware metadata.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Drop pre-ucert signature verification.
HTTPS is optional now as integrity can also be provided using ucert.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This version contains NVME fixes.
Edited the patches to modify the package Makefile directly so as to reduce
hacks in the OpenWrt Makefile.
Added LTO support to lower filesize by ~4KB.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Add new package,
open-vm-tools is Open Virtual Machine Tools for VMware guest OS
tested: OpenWrt master and 18.06.2 (x86_64) on ESXi 6.5, 6.7
Signed-off-by: Yuhei OKAWA <tochiro.srchack@gmail.com>
This program has been created to aid open source spectrum analyzer
development for Qualcomm/Atheros AR92xx and AR93xx based chipsets.
Find more information about the package here:
https://github.com/simonwunderlich/FFT_eval
This package is used in LibreMesh, however our CI doesn't support
multiple architecures as all LibreMesh code is lua. Adding this package
to the official repos allows us to offer it in our tool chain.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Remove LTO. It causes an increase in size.
Remove fsck.btrfs. It's just a script that says to run btrfs check.
Replace INSTALL_BIN with CP to avoid copying what should be a symlink.
Install libbtrfsutil. This is needed by a few of the tools.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
By default the database of the known drives is compiled into smartctl and smartd.
These tools also support loading external database from /usr/share/smartmontools/drivedb.h.
This changeset splits moves the database to a separate package
which allows to save some flash space and RAM for those for whom
generic S.M.A.R.T. attributes are enough.
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
Added -Wl,--gc-sections for smaller size.
Removed TARGET_CFLAGS as there is no difference in size.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
This also fixes some space-indented lines to use tabs.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
This also adds a service_triggers() function.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
The shared library does not depend on libatomic nor libstdcpp anymore.
This is very good news for the users of said lib.
This commit updates the depends accordingly.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
This also adds a service_triggers() function.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This replaces the use of uci_validate_section() with
uci_load_validate(), which removes the need to declare local variables
for every config option.
This also adds a service_triggers() function and removes some
unnecessary curly brackets.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
While researching CircleCI build failures, I came across a linking error
relating to liblzma, where ld instructs to recompile with fPIC.
Unfortunately, this increases filesize. Added some configure flags to try
to mitigate is somewhat.
Removed maintainer as he is no longer active.
Added PKG_CPE_ID for proper CVE tracking.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
OpenSSL is only used for hashing while being a huge dependency (689.4KB
for mips_24kc.
Cryptsetup also supports and recommends argon2 for hashing, which is not
provided by OpenSSL.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Add several configure arguments to speed up build time.
Switch from using libgcrypt to using the kernel directly.
This has a number of benefits including smaller size and faster speed. It
also allows selection of desired crypto primatives instead of having all
of them.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Otherwise one gets a failure if the libraries (e.g. Python
header file) exist in the build system. Worse in some cases
is host headers being found if one doesn't specifically
disable a library search in autotools. It is especially
important that Python is disabled by default.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
50-client.cnf is used by the client library, so it should be installed
with the library. This commit moves the configuration file to the
correct package and updates its depend (50-client.cnf is sourced by
my.cnf from mariadb-common).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The libelf1 source package has been renamed to libelf in OpenWrt base,
adjust the dependency in "at" accordingly.
There are no functional changes and no changes in the resulting binary.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The libelf1 source package has been renamed to libelf in OpenWrt base,
adjust the dependency in avrdude accordingly.
There are no functional changes and no changes in the resulting binary.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Based on debian patch. LDFLAGS were not being passed, which caused relro
to not be applies.
Also made stock CFLAGS optional. -fkeep-inline was keeping sizes high.
Removed PKG_NO_MIPS16 as the original problem seems to be gone.
Size from 54338 to 50761
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The code from 1996 is using pre-c99 inline semantics that cause compilation
failures on i386. Added std-gnu89 to fix this.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Use codeload URL suggested by neheb
Add ABI_VERSION:=5 to libsensors
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Bump PKG_RELEASE just in case.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Removed weird uclibc++ compatibility stuff as it seems to not be needed
anymore.
Switched to standard variables.
Added PKG_BUILD_PARALLEL for faster compilation.
Removed PKG_FIXUP as it seems the package has been fixed already.
A few changes to the CFLAGS and linker options resulted in ipk size going
from 244694 to 244283, possibly due to previous overlinking.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Disable dynamic libraries and enable LTO
Only use `--enable-libc-musl` when musl is selected
Shrinks ipk size by about 200KB
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
This allows to get rid of the heavy libstdcpp dependency.
Added -fno-rtti to save a little space (200 bytes).
Also did some Makefile rearrangements for consistency.
Added HTTPS to URLs.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Backport an upstream patch to remove the upper limit of
lm-sensors version check, so that using lm-sensors 3.5.0
will work.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Drop the config knobs '*_address' and introduce '*_interface'
and '*_ipv6' instead.
'*_interface' takes an openwrt interface name ('loopback', 'lan',
'wan' etc), from which the primary IP is used to listen on. If
the matching '*_ipv6' is set to '1', the IPv6 adress will be used,
IPv4 elsewise.
procd interface triggers are now combined with this, so if a listen
interface is not yet configured when the init script is executed, the
process start is defered, and the trigger takes care of that once
the interfaces are ready.
Signed-off-by: Andre Heider <a.heider@gmail.com>
* bump mc package release to 4.8.22,
news in this release see here:
http://midnight-commander.org/wiki/NEWS-4.8.22
* refresh subshell patch
Signed-off-by: Dirk Brenken <dev@brenken.org>
Use the new ALTERNATIVES mechanism to fix installation conflict
against busybox find and xargs. Also add myself back as maintainer
since folks seem to be asking me anyway.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Just bugfixes:
Fix missing proper initialization of pv_list struct when adding pv.
Fix (de)activation of RaidLVs with visible SubLVs.
Prohibit mirrored 'mirror' log via lvcreate and lvconvert.
Use sync io if async io_setup fails, or use_aio=0 is set in config.
Fix more issues reported by coverity scan.
Updated Makefile to standards.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Does away with /etc/default/mysqld, introduces uci configuration
instead. The init script receives some further brushing up, like a
function (copied from Debian) to get mysqld configuration parameters
easily and quickly.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- correct spelling in comments ("mariadb" to "MariaDB")
- remove mysqld_safe and mysqld_safe_helper (not used)
- add some extra cmake configuration defines
- remove cmake configuration defines that don't exist in the source
- don't disable address sanitizer (ASAN) support
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Add galera support by installing the configuration and including the
wsrep scripts in mariadb-server-extra.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
There is little sense in keeping these charsets in an extra package. The
included sets are of the single byte character set variety. They only
amount to a few kbytes.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
At present there are some flaws related to configuration, also related
to the packaging of mariadb. For starters there are complaints that the
configuration is too static.
To address this a new configuration layout is introduced. The primary
configuration file (my.cnf) is changed so that it now only includes
further configuration files in the directory /etc/mysql/conf.d. More
default configuration files are added for the server and the client.
This is the new default configuration.
With these changes it's possible for the user to select if they want to
change the default configuration (in conf.d/*.cnf) or if they want to
drop their own files into conf.d instead. If the user .cnf files are
read after the default .cnf files (files are included in alphabetical
order), they will overwrite the settings from the default configuration.
The other flaw is that the my.cnf file is included in mariadb-server.
But that doesn't really fit the requirements, as the client also uses
the configuration file(s). To accomodate this a new package
mariadb-common is added. It installs the shared my.cnf file.
The remaining changes add base packages, both for the server and the
client. These are meant as foundation for the packages containing the
respective binaries. In summary they will install the configuration,
small miscellaneous files (SQL scripts etc.) and the user "mariadb".
That means that everything is ready for the binaries, like mysql and
mysqld. If there is not enough space left on flash memory, the user can
just drop the binaries on a pendrive, link them to /usr/bin and get
started.
The ideas and configuration files were copied from Debian. Some
amendments were made.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This commit deals with changes related to plugins and how they're built
or disabled.
Currently a lot of plugins are packaged which are merely for tests or
plain examples. Other distros do not bundle these, hence this commit
does away with them.
A few new plugins are added related to PAM and Kerberos (auth_gssapi,
auth_gssapi_client and auth_pam).
The BuildPlugin template is refactored to also allow building of library
plugins (needed for auth_gssapi_client). The template is also cleaned up
- some extraneous dollar signs are removed and the install function is
now defined outside the template.
Unwanted plugins/engines are now turned off efficiently (without using
cmake variables) by blanking CMakeLists.txt files in the associated
folders. The idea was lifted from Gentoo.
ha_sequence is now built into the server. This is an upstream
preference. The plugin is about 30 kbytes in size, so there is no harm
adding it into the server, which weighs in at about 15 Mbytes anyway.
Last but not least the auth_socket plugin is now also built into the
server. This allows the local root user to login to the database
without a password being set. This makes maintenance easier without
being detrimental to security. The idea was lifted from Debian.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
libedit changed its interface a while back. mariadb currently does not
recognize this interface and instead uses a static old readline version.
It does not link in the system readline due to licence incompatibility.
This commit adds a patch that enables mariadb to detect and use the
system libedit. The patch was sent upstream already ([1]).
[1] https://github.com/MariaDB/server/pull/1001
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Align package variables to other packages which also use a git checkout
as tarball:
- PKG_VERSION should not be set to a date, just rely on package default
handling which apply automatically when using PKG_SOURCE_VERSION
- introduce a plain PKG_RELEASE instead to allow keeping track of modified packaging
- PKG_SOURCE_DIR is set by package defaults
- same for PKG_SOURCE
- this results in a different hash of the tarball created, so adjust
PKG_MIRROR_HASH
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
The ethstat plugin for collectd provides a convenient way to track a large list
of variables associated with network interfaces such as channel busy time and
many others.
A list of the available variables for a given interface may be acquired by
running ethtool -S <interface>
Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
The build breaks when Kerberos is available in staging dir. mariadb
build system exits with error:
CMake Error at libmariadb/cmake/plugins.cmake:43 (message):
Invalid plugin type NO. Allowed plugin types are DYNAMIC;STATIC;OFF
It doesn't like the definition "PLUGIN_AUTH_GSSAPI_CLIENT=NO" anymore.
We need to set it to "OFF" to make it happy.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Very minor bugfix.
Also adjusted standard to gnu89 to fix compilation issues (lot of missing
prototypes).
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* disable vfs support by default as long as the underlying
librpc issus has not been fixed - should fix buildbot compile
(#7180#7349)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Include fix from upstream for MDEV-17200. musl-1.1.20 segfaults when
pthread_detach() is called for already detached threads.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Work around automake demanding README with a symlink.
Add new dependency on libsysfs.
Avoid dependency on libxml, curl, openssl by disabling NIST beacon support.
We also continue to remove gcrypt, and jitterentropy is not packaged.
Remove patch that no longer cleanly applies.
If newlines in log messages are a problem, we should take it up with
upstream.
Signed-off-by: Nathaniel Wesley Filardo <nwfilardo@gmail.com>
Fixes: github #7303
Added missed 'g' in Bangkok for zoneinfo-simple package.
Also removed dedicated version for code, as we shouldn't mix different versions.
Signed-off-by: Vladimir Ulrich <admin@evl.su>
Previously, an old git revision was used. Moved to stable. Reorganized the Makefile as a result.
The stable version is based on a newer git revision. UScan can also properly track this now.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Use the shared version of libpcre2 instead of bundled.
Fixes the following error:
Package fish is missing dependencies for the following libraries:
libpcre2-32.so.0
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Since the switch to GCC7, this has not compiled as it assumes gnu89 behavior.
-fgnu89-inlining is not enough so use std=gnu89.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Probably a result of GCC7 that it fails now.
Added PKG_CPE_ID for proper CVE tracking.
Added PKG_BUILD_PARALLEL for faster compilation.
Reorganized Makefile slightly for consistency with other packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added patch to fix some glibc-isms.
Added PKG_BUILD_PARALLEL for faster compilation.
Rearranged slightly for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added an upstream pending patch to fix musl support.
Oddly enough, this never caused a runtime issue, only compile time
warnings.
Added myself as maintainer, as previously agreed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
