This patch removes some autoconf goo which is causing bind to use the host's ar
instead the ar from the toolchain. If they're both elf platforms this is fine,
but it's no good if host is darwin.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
The initial conversion to restart sqm on interfaces it is configured
for in case of (transient) dis- and reappearance was half finished.
These changes clean up the handling of exlicitly passed interfaces
in run.sh: no second argument defaults to all configured interfaces
the alternative is an individual interface name passed as 2nd
argument to run.sh. The first argument either is start or stop.
No argument at all will behave as if start was passed.
Survives light testing...
Signed-off-by: Sebastian Moeller <moeller0@gmx.de>
Alan Jenkins noted a bug in the smq luci GUI that effectively
erased several configuration paramters if two checkboxes were deselected.
This behaviour seems consistent in luci but certainly has the potential
to confuse users. While confusion can not really be avoided generally
it seems wise to change the default interpretation for empty or non-existent
itarget and etarget variables from the qdisc's default (5ms in the case of
one of the codels) to automatic determination of tghis variable dependent on
the configured bandwidth, as codels target variable should be large enough
to contain at least one full packet. With this change sqm-scripts will
do the right thing by default, but will yet allow the user to specify
over-ridding values (as long as the user does not un-check the
entry-field exposing check boxes). Survives light testing...
This change set also changes the sqm-scripts luci gui to note the user
of the change. For compatibility with existing setups sqm-scripts
will still honor "auto" as an alternative explicit way of requesting
automatic target selection. This might turn into a warning in the future
and might be phased out...
Signed-off-by: Sebastian Moeller <moeller0@gmx.de>
Package ethtool is missing dependencies for the following libraries:
libssp.so.0
Makefile:45: recipe for target '/home/zero/development/openwrt/bin/ar71xx/packages/packages/ethtool_3.18-1_ar71xx.ipk' failed
Signed-off-by: Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
From: Michael Haas <haas@computerlinguist.org>
* init script no longer creates certificates (consider client mode as use
case)
* patches/010_fix_getnameinfo.patch: Fix getnameinfo signature
* patches/011_disable_ssp_linking.patch: Disable -fstack-protector as it
is not always available in OpenWRT
* old patches (in oldpackages) no longer necessary
* remove libwrap dependency
* remove libpthread dependency
* respect CONFIG_IPV6
* init script uses procd
* sample stunnel.conf runs in client mode - prevents start failure,
does not require cert
Possible enhancement: automatically generate certificate as done in
uhttpd. However, as client mode is a possible use case, I'd rather not.
Additionally, stunnel may use several certs with user-defined locations
and we can't easily set a cert location via command-line args.
The package is based on
https://sites.google.com/site/twisteroidambassador/openwrt/stunnel
Signed-off-by: Michael Haas <haas@computerlinguist.org>
This patch add a new package, git-http, that contains all
http related commands (and ftp as extra). All http/ftp
depends on libcurl. Even without SSL suport in libcurl,
git compiles and it returns an informative error only
at runtime.
The use of symlinks now are trigged using NO_INSTALL_HARDLINKS env
and not based only on Makefile patch.
imap-send was kept builtin and idependent of curl (just as it was
before)
Template files, which are not necessary, where removed.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Previously, ./configure was running checking local system and not
OpenWRT target. This would avoid any configure test about OpenWRT
libraries.
With a patch in configure, non cross-compiling-friend test are
ignored and Makefile can use default configure.
As side effect, git commands are now at /usr/lib/git-core and not
/usr/libexec/git-core.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
- use https URL for fetching sources from GitHub, otherwise cloning
sources could stall buildbots by asking to accept a/the SSH host key
- do not _depend_ on DEPENDS but _select_ them, so the package(s) always
appear in menuconfig, not only when all dependencies are already
selected --> dependencies are automatically pulled in when package
is selected by user
- use PKG_INSTALL
- factor out the libeibclient library as own package
- use CONFIGURE_ARGS instead of dedicated Build/Configure
- same for TARGET_CFLAGS and Build/Compile
- do not include /etc/functions, already included by /etc/rc.common
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
During system start up pppoe devices seem to receice ifup events before
the interface actually exists. This commit makes sqm's run.sh script
test whether the sys files for an interface exist before actually trying
to start an SQM instance on an interface. This seems to nicely avoid
starting on an not fully established pppoe interface and avoids a number
of error messages during startup.
In addition, debug logging is disabled.
Signed-off-by: Sebastian Moeller <moeller0@gmx.de>
fix build errors on Arch Linux/Fedora 20
config.log trying to link with /usr/lib/libcrypt.so
/usr/lib/libcrypt.so: undefined reference to `memset@GLIBC_2.2.5'
linkage is AC_LIB_HAVE_LINKFLAGS macro behaviour
see http://marc.info/?l=gnulib-bug&m=129660262901148
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
config.log reports
WARNING: uuid support disabled as libblkid is too old
because the test macro AC_BLKID_VERS is not cross compile friendly
resulting in libblkid_cv_is_recent=unknown
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Some interfaces like wan-pppoe go away, when the ppp connection is lost
and get recreated once the link is established again. SQM now
has its own hotplug script to re-enable itself on the interfae just hotplugged.
SQM will not touch other instances of itself running on other interfaces
if called by hotplug.d. The implementation now allows this functionality by
calling run.sh like:
/usr/lib/sqm/run.sh interface YOUR_INTERFACE_NAME_HERE
e.g.: /usr/lib/sqm/run.sh interface ge00-pppoe
If called with a specific interface SQM will only try to disable itself
on that interface to clean up all left over state and the re-enable
itself on just that interface. Hopefully that allows for better service
with instable interfaces like pppoe. The current code passes a simple manual
stop start test of the ge00-pppoe interface from the GUI and does seem
to do the right thing, at least on cerowrt 3.10.50-1...
The cross-compiling patch is no longer necessary. Also added librt as a
dependency, since it is required. This also fixes an issue where
support for linux/errqueue.h was not being detected correctly and
causing a build failure with 3.18.
Signed-off-by: John Szakmeister <john@szakmeister.net>
* new service "bind-nsupdate" using nsupdate to directly updates a PowerDNS or Bind server via nsupdate.
suggested by Jan Riechers (Pull #957) many thanks!
* updated tld-names.dat
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Patch suggested from upstream. Bumping release and including the patch
directly until a point release is available.
Signed-off-by: Karl Palsson <karlp@remake.is>
Redsocks is a daemon running on the local system, that will transparently
tunnel any TCP connection via a remote SOCKS4, SOCKS5 or HTTP proxy server. It
uses the system firewall's redirection facility to intercept TCP connections,
thus the redirection is system-wide, with fine-grained control, and does
not depend on LD_PRELOAD libraries.
Signed-off-by: Johannes Morgenroth <jm@m-network.de>
Support more options that came with mosquitto 1.4
Use more built in functions to make script simpler to read and easier to
extend.
Signed-off-by: Karl Palsson <karlp@remake.is>
Of particular note, this adds optional support for websockets. This
defaults to enabled, as it's the biggest new feature in this release.
A config item is provided to disable it for manual use.
Full release notes: http://mosquitto.org/2015/02/version-1-4-released/
This also remove some build workarounds that are no longer required for
newer versions of mosquitto.
Signed-off-by: Karl Palsson <karlp@remake.is>
When an ifindex for an interface changes, some monitoring tools can no
longer find the interface and send alerts. Monitor all network
interfaces via the procd netdev parameter, so that
/etc/init.d/snmpd reload will restart snmpd if any ifindex changed.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
- Refactor RUN_C into CONFIGFILE, as used in dnsmasq and igmpproxy init
scripts.
- Add a newline after each function definition.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* remove upgrade handling for version 3.0.21 or older packages. Also fix#726
* added user.action, user.filter and user.trust files to conffiles (might be modified by user on running system)
* move permission setting from Makefile (install) to initscript because permissions are overwritten during/inside buildroot
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
- BUG/MEDIUM: backend: correctly detect the domain when use_domain_only is used
- MINOR: ssl: load certificates in alphabetical order
- BUG/MINOR: checks: prevent http keep-alive with http-check expect
- BUG/MEDIUM: Do not set agent health to zero if server is disabled in config
- MEDIUM/BUG: Only explicitly report "DOWN (agent)" if the agent health is zero
- BUG/MINOR: stats:Fix incorrect printf type.
- DOC: add missing entry for log-format and clarify the text
- BUG/MEDIUM: http: fix header removal when previous header ends with pure LF
- BUG/MEDIUM: channel: fix possible integer overflow on reserved size computation
- BUG/MINOR: channel: compare to_forward with buf->i, not buf->size
- MINOR: channel: add channel_in_transit()
- MEDIUM: channel: make buffer_reserved() use channel_in_transit()
- MEDIUM: channel: make bi_avail() use channel_in_transit()
- BUG/MEDIUM: channel: don't schedule data in transit for leaving until connected
- BUG/MAJOR: log: don't try to emit a log if no logger is set
- BUG/MINOR: args: add missing entry for ARGT_MAP in arg_type_names
- BUG/MEDIUM: http: make http-request set-header compute the string before removal
- BUG/MINOR: http: fix incorrect header value offset in replace-hdr/replace-value
- BUG/MINOR: http: abort request processing on filter failure
- BUG/MINOR: pattern: error message missing
- BUG/MEDIUM: pattern: some entries are not deleted with case insensitive match
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
new option "use_curl" to force the use of curl if GNU Wget and curl are installed
fix initscript reload(): reload and not restart if killall -1 fails
BusyBox nc not support -v in every compiled version
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Use the generic autoreconf facility to pickup proper variants of
autoconf, automake and libtool.
Remove the unneeded Build/Configure override.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
The Makefile already uses the proper autoreconf fixup but leaves a manual
autoconf invocation in place.
The bad autoconf call leads to the following build error in the SDK:
( cd .../rtorrent-0.9.4-git; ./autogen.sh );
aclocal...
autoheader...
libtoolize... libtoolize nor glibtoolize not found
make[2]: *** [.../rtorrent-0.9.4-git/.configured_] Error 1
Remove the entire Build/Configure override to let rtorrent build correctly.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
modified source directory structure
- files for production files
- samples for sample files (not installed in final build)
modified Makefile
- separate options for additional provider scripts
- remove comments and empty lines from final build
add IPv4 100.64/10 (RFC 6598) and 169.254/16 (RFC 5735) to the range of default blocked IP's.
new option "bind_network" to force GNU Wget or cURL to use specific network/interface for communication
new "domains.google.com" as IPv4 DDNS provider #822
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
The SSH transport can trigger interactive prompts during the build,
this is failing all build bots atm.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
The Open Lighting Architecture is a framework for lighting control information.
It supports a range of protocols and over a dozen USB devices. It can run as a
standalone service, which is useful for converting signals between protocols,
or alternatively using the OLA API, it can be used as the backend for lighting
control software. OLA runs on many different platforms including ARM, which
makes it a perfect fit for low cost Ethernet to DMX gateways.
Signed-off-by: Christian Beier <dontmind@freeshell.org>
restructure startup of dnymaic_dns_updater.sh
- first run load_all_config_options (it returns 1 if SECTION_ID not found) #779
- set all defaults if necessary
- verify if username and/or password is needed inside update_url #779
- remove wait - will be done by retry_interval and retry_count if communication fails
provider specific update scripts
- verify if username/password are needed
services_ipv6
- added freedns.afraid.org
- IPv6 should work due to their documentation
minor fixes
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Fixed issue in mwan3 status output with mwan3 interfaces not yet configuerd in network config
Removed nexthop argument as it is no longer used
Signed-off-by: Jeroen Louwes <jeroen.louwes@gmail.com>
* Makefile
- modified to support new LuCI build structure when building i18n support
- increase "patch" version
* privoxy.lua detail.lua apperror.lua
- modified version detection
- removed function ipgk_version()
* new file build/i18n-po2lua.pl
- copied from luci build system to create lmo language files
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* remove CHANGELOG from distribution
* fix syslog output printing "\n" or other formating chars
* ddns configuration
- new UCI-config value ddns.global.allow_local_ip "0" or "1"
(default "0") - (OpenWrt Ticket 18642)
* dynamic_dns_functions.sh
- new function split_FQDN() splits a given FQDN into host,
(registerable) domainname, and TLD using
https://publicsuffix.org/list/effective_tld_names.dat
- verify_host_port() use BIND host, if installed
- verify_host_port() not detecting ip, if already given
- fixed regexp for IP detection from nslookup's answer - (OpenWrt
Ticket 16363)
- support ddns.global.allow_local_ip to allow sending non public IP's
to DDNS provider like 127.x, 192.168.x.x or fxxx - (OpenWrt Ticket
18642)
* new file tld_names.dat
- used by dynamic_dns_functions.sh inside split_FQDN() function to
find valid TLD's
* update_cloudflare.sh
- modified subdomain/domain splitting using split_FQDN()
- modified support for AA12.09 (json_get_keys())
- minor fixes and cleanup
- many thanks to Aaron Tanner for testing
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
- update to latest version (v2.10.0)
- add a patch to fix compilation failures due to missing TIOCSRS485 macro
- add license info
- add myself as maintainer
Signed-off-by: Nicolas Thill <nico@openwrt.org>
