Talked it over with Ben (@scrpi).
He said he'd be fine with taking over maintainership of this.
@scrpi: please confirm this on PR.
Signed-off-by: Ben Kelly <ben@benjii.net>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Copy mime.conf to temporary directory so squid process can properly read the file. Without it squid cannot access mime.conf and throws a warning during startup.
Signed-off by: Adam Gensler <openwrt@a.gnslr.us>
HTTP header content-disposition isn't honored resulting in source tarball name only containing version number.
Switch to GIT repo as workaround to avoid clashing filenames.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Version bumped to 4.3.5. Separated out compile/install steps since
compiling with $DESTDIR yields bogus results. Removed rfc-3527 patch
as something similar (better) is now upstream (well, more complete
error checking anyway). Change relay scripts from '-l ifname' to
'-U ifname' to correspond to upstream changes.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Instead of causing nondeterministing conditional compilation depending on
whether libnl-core happens to be present or not, fixup the net-snmp package
to link against libnl-tiny which is present by default on the majority of
systems.
In order to successfully build against libnl-tiny, a number of things had
to be fixed in both the upstream configure and the outer Makefile:
- Add a patch which fixes the upstream configure macros to properly handle
cases where the cache variables for nl_connect() and netlink.h tests are
predefined. Without this patch, all subsequent link tests in configure
will fail, causing the build system to assume functions like opendir() or
readdir() to be missing, leading to build failures later on due to
conflicting redefinitions of structures and function prototypes
- In the same patch, stop probing the host systems /usr/include/libnl-3 if
ac_cv_header_netlink_netlink_h is given. This brings the proprietary
configure bits in line with the behaviour expected from autoconfig in a
cross compile setting
- Explicitely request nl support by passing the --with-nl flag to configure
- Pass the required cache variables to skip the broken tests for
nl_connect() and netlink.h
- Amend TARGET_CPPFLAGS to let net-snmp's build system discover nl-tiny's
netlink/netlink.h and netlink/socket.h
- Enable the autoreconf fixup to regenerate the broken shipped configure
from patched macros
- Adjust the depends to unconditionally require libnl-tiny
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Add support to configure strongswan via uci.
uci support is based on the following sections
-ipsec : Global config items belonging in the strongswan.conf file
-remote : Defines the remote peer(s)
-tunnel : Defines the IPSec connections in tunnel mode
-transport : Defines the IPSec connections in transport mode
-crypto_proposal : Defines the different crypto proposals
Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
Signed-off-by: Gino Peeters <peeters.gino@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Commit e73964fa8f incorrectly dropped the
patch 101-update-struct-msghdr.patch. Add it again, and while add it
also add the follow-up patch that was added upstream.
Fixes#3757.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When libnl-core is enabled, but libnl isn't, build fails because of a
missing dependency on libnl-3.so.200. Depending on libnl-core seems to
work for both cases.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Update to 5.7.3 by refreshing patches; remove 800-format-security
as upstream integrated.
Add libnl dependency in the package Makefile as net-snmp will check
if libnl is enabled in config_os_libs2.
Remove unneeded PKG_FIXUP build variable.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
this installs the default MIBS-files under /usr/share/snmp/mibs .
Also aligns the defines to the same sorting-scheme.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
change download link from git:// to https:// .
Git links are less safe (not encrypted) and, more importantly, they are blocked by company firewalls.
Https links do not have either issue.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Move git hash to PKG_VERSION instead of PKG_RELEASE
Use xz git tarball instead of gz
Add dependency to ustream-mbedtls as mbed TLS 1.3 is deprecated.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Dropped patches, unrequired.
There is a newer version released, but I cannot vouch for it yet.
We've been using this one for about a year now.
Since, I only recently became maintainer of `keepalived`, I will
push this as the current stable one, and start using a newer
version internally, before releasing it to the public.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* switch to procd interface trigger
* no additional active monitor/polling in the background
* simplified code
* new option "trm_maxwait", how long (in seconds)
should travelmate wait for wlan interface reload action
(default: '20')
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
keepalived seems to be rather particular about which config parameters
come before others.
When defining a virtual IP address, keepalived will check to see if the
vrrp instance is associated with a valid interface. Previously, the
interface parameter was declared after the virtual IP address which
caused an error when keepalived tried to run this check. Keepalived
tries to fall back to checking if 'eth0' exists.
The fix is to re-order the config stanzas so that the interface
parameter comes before the virtual IP address definitions.
Signed-off-by: Ben Kelly <ben@benjii.net>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Also fix ordering of config stanzas
We were parsing the track_script and track_interface definitions to
include the weight param when configuring a vrrp_instance. This is not
correct, as the weight param inside a vrrp instance is used to augment
the one defined in the script.
We were also not taking into account vrrp_script stanzas
This commit skips the parsing and simply lists the name of the
track/vrrp object
Signed-off-by: Ben Kelly <ben@benjii.net>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Adding @scrpi (Ben Kelly).
Initial UCI config support was written by me (@commodo)
Updates & fixes added by Ben.
Signed-off-by: Ben Kelly <ben@benjii.net>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
keepalived seems to work fine without it.
There is fall-back code that kicks in when it's not present.
So, we will build against (or pull) the libnl package only
if there is another package that pulls it.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Dynapoint is a dynamic access point manager
Signed-off-by: Tobias Ilte <tobias.ilte@campus.tu-berlin.de>
Acked-by: Thomas Huehn <thomas.huehn@evernet-eg.de>
- minor whitespace fixes/cleanups
- squashed multiple commits into a single one before merge
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
- no longer build public_suffix_list.dat.gz during build #3678
- replace "\s" with "[[:space:]]" inside Makefile because "\s" ignored by some sed versions
- tools/public_suffix_list.sh still available to rebuild public_suffix_list.dat.gz outside OpenWRT/LEDE build system
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Get public_suffix_list.dat without using secure connection. #3678
File generated during build, because it's the only option to have an
actual version packaged.
Long term Cloudflare_v1 package will be changed to no longer need
public_suffix_list.dat
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Maintainer: @arfett
Compile tested: ramips, xiaomi mini, r49946
Run tested: ramips, xiaomi mini, r49946
Description: Bump to 1.4-5. Added new page for wifi configuration edit, similar how the current network configuration page works.
Also enabled collecting of wifi configuration in troubleshooting page.
Signed-of-by: Tomislav Požega pozega.tomislav@gmail.com
Update to a new wireguard version. Simple version bump.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Endpoint dependency implemented. The actual endpoint is used exclusively. Using
this approach we are dual-stack safe (not errors on missing protocol) and create
only the dependency that are really necessary.
Signed-off-by: Dan Luedtke <mail@danrl.com>
* fixed dnsmasq check if multiple instances are present
* bring back query function on highly demand
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fixed a dnsmasq restart issue (udhcpc error)
* fixed a long standing corner case bug in "disabled" state (does not
remove active block lists!)
* simplified overall sort, removed needless 'for loop'
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Fix return codes, if ip data at Godaddy.com and Cloudflare.com are
already up to date, handle it as succesful update.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* changed complete dnsmasq handling
- no longer redirect ad requests to internal web server via firewall
rules etc., in fact send back a simple NXDOMAIN for all
ad related (sub-)domains
- smaller memory footprint for block lists
- removed needless uhttpd instances
- removed needless firewall rules/redirects
* init/hotplug system migrated to procd
- removed hotplug.d script, now using procd interface trigger
* reduced code size/complexity
- removed needless internal pre-checks & function blocks,
no longer rely on a separate helper library
- removed flash writes to adblock config
* support different download tools like wget (default), aria2c,
uclient-fetch, curl (see online doc)
* adblock status/statistics via ubus call (see online doc)
* various bug fixes
* documentation update
* changed makefile copyright notice
Signed-off-by: Dirk Brenken <dev@brenken.org>
- UCI to take advantage of "qname-minimisation-strict:"
- UCI to block chaos reponses bind, server, and version
- UCI to limit or prefer recrusion over IP4 or IP6
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
- UCI option dnsmasq_gate_name typo in few locations
- NTP hotplug to check /etc/init.d/unbound not ..dnsmasq
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
- update_cloudflare_com_v4.sh: enclose urls in single quotes
- dynamic_dns_functions.sh: force to return only one ip, if using nslookup to get registered ip
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Update to new snapshot version. We also make IPV6 optional, and
conditionally selecting the udptunnel6 module, using the same trick that
the strongswan package also uses for this kind of dependency expression.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When only kmod-openvswitch is enabled, which commonly happens during LEDE
release builds, there is no need to build the entire userland of openvswitch
as this is done at a later stage on systems dedicated to build only userspace
packages.
This change conditionalizes the dependency on python, which means that python
prerequisites are only compiled if the openvswitch-python package is enabled,
which allows us to eliminate the entire python dependency chain.
Furthermore, this change sets MAKE_PATH to the kernel module sub directory
if only kmod-openvswitch is enabled which causes the openvswitch build system
to only process sources related to the .ko files.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This patch prepares for another future package (ecdsautils),
which builds multiple binaries all linked to libuecc.
The changes are a direct copy of [1]. The original commit
message was:
> commit cb2ecbfdf0c478568a28aacb99d30fd6ee5c0dd1
> From: Matthias Schiffer <mschiffer@universe-factory.net>
> Date: Tue, 3 May 2016 21:33:34 +0200
> Subject: libuecc: use shared instead of static library
>
> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
[1]: cb2ecbfdf0/patches/packages/openwrt/0007-libuecc-use-shared-instead-of-static-library.patch
Signed-off-by: Dominik Menke <dom@digineo.de>
modified Makefile to:
- stop service before install when updating reported at http://forum.lede-project.org/t/ddns-scripts-upgrade-issue/456/1
- run uci-defaults for all packages
- modify services files only on new installation
still some commands already covered by default_postinst() etc. but they are in there for backward compatibilty.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
This version of ocserv needs us to explicitly specify the prefix
for libev. Add a --with-libev-prefix parameter to make the
configure stage to get the right library.
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
- History: prior to package 1.5.10-3 /var/lib/unbound was not used
- History: prior to package 1.5.10-4 no UCI scripts were provided
- Problem: UCI 'option manual_conf 1' only copied unbound.conf and root.key
- Problem: power users that had complex file nests cannot use this
- Fix: README.md includes instructions for /var/lib/unbound jail
- Fix: unbound.sh copies ALL of /etc/unbound for 'option manual_conf 1'
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
- tld_names.dat.gz
- rename to public_suffix_list.dat.gz
- (re)created during build
- new location /usr/share
- move services files to /etc/ddns
- new services
- CloudFlare.com-v4 using API-Version 4 without using public_suffix_list.dat
- GoDaddy.com
- both depending on cURL package
- both with modified syntax for option domain ( NEW: [host[.subdom]@]domain.tld )
- new service
- Now-DNS.com formerly Now-IP.com
- service afraid.org now supports key-auth and basic-auth
- new command line options for dynamic_dns_updater.sh and dynamic_dns_updater.sh
- adapted ddns.init and ddns.hotplug to new command line options
- renaming config options inside section global
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Now that we don't ship any modules by default, znc might be started
without any modules. Unfortunately znc refuses to start without any
modules, so patch out the appropriate check.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-unbound.sh implements the majority of requirements in README.md
-rootzone.sh reloads a small subset for alternate trigger maintenance
-unbound.init sets procd triggers on Unbound and dnsmasq (dhcp) UCI
-two part commit squashed with Makefile included
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
-dnsmasq really provides nice local DHCP-DNS records
-Unbound host records would be clumsy to update
-Unbound can be configured to forward to dnsmasq
-iptools provided to facilitate PTR records
-flexible ipv6 colon notation is a bit complex
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
-DNSSEC needs time, time needs ntp, or power off RTC
-Many consumer routers are cost thrifted without RTC
-Conf "val-override-date: -1" disables time inside DNSSEC
-Need restart as option is not dynamically switchable
-hotplug/ntp is used to set file /var/lib/unbound/unbound.time
-UCI will add or remove option depending on flag-like-file
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
If libjson-c is detected during bind-libs configure phase, bind-libs
will be built with libjson support. This results in a missing dependency
error during install phase. Solve this by disabling libjson support.
This updates to the latest git version of acme.sh and drops the patch to
disable timestamps from the output (since that is now supported
upstream).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
This version handles transitioning from a previous certificate that was
issues using the staging server, adds more debug logging, and handles
state directories better if issuing fails.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
quassel-irssi is an irssi plugin that allows irssi to connect to
Quassel cores. Quassel is a distributed IRC client in which the
core can run independently and be connected to by quassel clients
over the network.
Signed-off-by: Ben Rosser <rosser.bjr@gmail.com>
Create & run znc as a specific user rather than nobody. Converted to
use procd, removing dependencies on znc's 'droproot' module & 'su'
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
- haproxy 1.6 needs OPENSSL_WITH_DEPRECATED, OPENSSL_WITH_EC NPM ...
- fix buildflags for lua, so its not build with the host compiler
- fix duplication of defines
Signed-off-by: heil <heil@terminal-consulting.de>
The advanced playback module makes it possible for IRC clients to avoid
undesired repetitive buffer playback. IRC clients may request the module
to send a partial buffer playback starting from and ending to a certain
point of time.
Particularly useful with (supporting) mobile clients such as Mutter,
Colloquy & others.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
---
Unfortunately playback.cpp is not included as part of the standard ZNC
modules and so has been added as a patch.
- based on the work done by el1n with his authorization (https://github.com/el1n/OpenWRT-package-softether)
- updated softethervpn to latest version
- introduced necessary patches for lede compatibility (nossl3)
Signed-Off-by: Federico Di Marco <fededim@gmail.com>
Patch 101-musl-fixes defines __kernel_nlink_t as void; but using
a pre-3.6.11 kernel on an arm cortex defines __kernel_nlink_t as
unsigned short using uclibc
Fix the compile issue by not redefining __kernel_nlink_t
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Fixes issue openwrt#3403 "radiusd requires a temporary directory to be existent for certain operations, like verification of certificates."
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
This version will use the standalone (netcat) mode of acme.sh during
verification instead of exposing uhttpd to the internet for the duration
of the verification. It will also add an ip6tables rule to also support
verification over IPv6.
Also contains an updated version of acme.sh.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
musl.h was included before _GNU_SOURCE in 101-musl-fixes patch
leading to compilation issue on gcc (RTLD_DEFAULT not being
defined in dlfcn.h due to __USE_GNU not being set).
As described in the feature test macro man page feature macro
can be defined in the source code but need to be defined before
including any headers.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
'cifsmount' alone is not able to mount a SMB share, after
having installed kmod-fs-cifs this was possible.
So I guess adding kmod-fs-cifs as a dependency to cifsmount is ok.
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Package doesn't build with uClibc without them, but no change for other libc
variants so no need to bump revision.
Signed-off-by: Michal Hrušecký Michal.Hrusecky@nic.cz
-Patch for /etc/unbound/unbound.conf
--All work done in /var/lib/unbound/
--chroot or jail to /var/lib/unbound/
-Init script points to /usr/lib/unbound.sh
-Makefile to install new scripts in the package
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
-Unbound RFC 5011 is busy and writes frequently
-RFC 5011 creates working files in same directory
-DNSSEC root.key managed in /var/lib/unbound
-Protect against flash ROM wear out in /etc/unbound
-Scripts will copy back every 7 days instead
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
-Rebind to new interfaces cleanly
-Detach from old interfaces cleanly
-Some conf options do not reload dynamically
-Unbound grows some and this will shrink it
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
* change option 'trm_iw' to boolean,
1 => use iw (default)
0 => use iwinfo
* option 'trm_maxretry' now accepts '0' to disable this check at all
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
The configure script (for libdnet) seems to find <net/bpf.h>
and detect some BSD stuff.
The lidnet's Makefile wants to include eth-bsd.c, arp-bsd.c
and other BSD friends.
This seems to put a cork on it, and no BSD stuff appears anymore.
[at least on my system].
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Adds gitolite package which is a handy administrative tool for
managing shared git repositories.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
- privoxy.init fix handling of config section "system"
- change start/stop to start=95 and stop=10
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Lcdringer is a tool which runs on a Raspberry Pi with an LCD
display. Lcdringer connects to an XMPP server, listens for messages
sent to a particular Jabber ID, and displays these incoming messages
while playing an audible alarm. Lcdringer also responds to the messages
it receives with an indication of whether or not the audible alarm was
acknowledged with a button press.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
-Remove interlaced configuration changes
--Less sensitive to upstream example.conf changes
--Easier to read patch-of-patch work for maintenance
-Use MEMORY CONTROL EXAMPLE from http://unbound.net/
--Review and rework with respect to previous pacakge
--Effectively the same configuration as previous package
-Disable DNSSEC by default due to real-time chicken-n-egg
--Many OpenWrt target devices have no power-off clock (reboot)
--User choice of work around should be conscious
--Initial install should not fail reboot with DNSSEC default
-Add some defaults explicitly to prevent surprises
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
received. Otherwise an unauthenticated peer can repeat the KEXINIT and cause
allocation of up to 128MB -- until the connection is closed. Reported by
shilei-c at 360.cn
ec165c392c
Signed-off-by: Peter Wagner <tripolar@gmx.at>
Wrap around dhtcache vs. datacache confusion which prevented
the datacache service from starting.
While at it, sanetize default package selection.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Explicitely disable liblz4 and external libtalloc support in order to avoid
implicit dependencies leading to the following error on build environments
that happen to provide liblz4 and libtalloc:
Package ocserv is missing dependencies for the following libraries:
liblz4.so.1
libtalloc.so.2
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* add new 'envchk'function to check adblock environment only,
i.e. check volatile firewall rules or uhttpd instances
without list updates
* add new optional parm 'adb_loglevel',
set it to "0" to mute output (print only errors)
* set hotplug priority to '90' as well (missed in the last commit)
* documentation update
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
I think re-ordering the assignments is important here,
_and_ using := for PKG_SOURCE_SUBDIR instead of simple =.
I also grouped the assignments to make it more readable,
IMHO at least :-)
While at, we should also specify the license file
and remove the unneeded Compile definition - the default
just works fine.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
- moved from net to mail category
- removed no-ssl package and added ssl support as configuration option (default enabled)
- added configuration option to support extended logging (default disabled)
- disabled build of test tools
- added LEDE compatibility (support for openssl without SSL3)
Signed-off-by: Federico Di Marco <fededim@gmail.com>
This should massively improve performance for (at least) MIPS targets:
* poly1305: optimize unaligned access
This is a very appreciated fix from René van Dorst, adjusting the
arithmetic in Poly1305 to work fast on platforms with slow unaligned
access, such as MIPS. According to his calculation, this gives a 50%
improvement on small MIPS boxes.
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
remove postinst (of main package) from Makefile because all is done inside uci-defaults scripts
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
commands to apply changes introduced during release changes, moved from Makefile postinst to /etc/uci-defaults
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Local variable declarations outside of functions are illegal since the Busybox
update to v1.25.0, therfore remove them from the appropriate places.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* now a single config file in /etc/afp.conf
* convert services to procd while at it
* take over maintainership as the original maintainer is
unresponsive (see #1550)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
because otherwise the build of this package in LEDE trunk fails, complaining about lack of libz.so.1
signed off by Alberto Bursi <alberto.bursi@outlook.it>
- if local ip cannot be detected or is invalid then do not exit ddns-scripts #2950,
using multiple url's to detect local ip not jet implemented
- change spdns.de update url and add sydyn.de inside services file #2991
- move transfer- and lookup-program detection to dynamic_dns_functions.sh
so run once at startup in stead of at every transfer/lookup
- add khost, drill and hostip to verify_host_port() function
- updated tld_names.dat
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
The package creates a "mosquitto" user, but the support added for
persistence creates the data directory as root running the init script.
Properly chown the newly created directory to ensure it's writable.
Signed-off-by: Karl Palsson <karlp@etactica.com>
* enhance the new query function:
change the regex to find only the relevant blocklist entries
add a recursive tld search to quickly identify domains for
whitelisting (see documentation)
better result preparation
* add securemecca as new blocklist source
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add a query function to search the active blocklists for a specific
domain (/etc/init.d/adblock query <DOMAIN>)
* fix bug in ap mode/uhttpd port detection
* check general firewall and dnsmasq package dependencies and remove
redundant checks in ap mode
Signed-off-by: Dirk Brenken <dev@brenken.org>
* added a 'window.close()' to adblock landing page to automatically
close any pop-ups that might get loaded with a blocked ad
* simplified dnsmasq check in ap mode
Signed-off-by: Dirk Brenken <dev@brenken.org>
* change the default hphosts list source to ad and tracking servers
only, the overall list includes to many false positives
* new optional config parm 'adb_hotplugif' to restrict hotplug support
to a certain wan interface or to disable it at all
* documentation update
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Update Csocket to a newer version with compile fixes for OpenSSL with
disabled compression support. Since we don't get zlib as an transitive
dependency anymore, also add zlib as an explicit dependency.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Set teardown_on_l3_link_down notifying netifd xl2tpd wants to be
teared down when layer3 link loss is detected
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
while at it, also fix post-install script and no longer ship
gnunet-download-manager.scm, we ain't got guile anyway and it wasn't
touched for 12 years.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This fixes two issues with the freeradius package init scripts:
- The package installs libraries in /usr/lib/freeradius{2,3}, but the
musl dynamic linker won't find them there unless LD_LIBRARY_PATH is
set to include this directory. This adds an appropriate env statement
to the procd init setup.
- procd expects services to stay in the foreground, or it will be unable
to properly shut them down again. This adds the -f flag to radiusd to
achieve that.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
This adds a package wrapping the acme.sh script from
https://github.com/Neilpang/acme.sh in Uci config and hooks to interact
correctly with uhttpd.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Before starting chilli instance, it first removes generated
files (/var/run/chilli*) for the instance. While deleting
generated files, it doesn't match full instance name.
Thus if coova-chilli config file (/etc/config/chilli) has
instances wlan11 and wlan1 in order,
when creating coova-chilli instance for wlan1, it is removing
files generated for wlan11 instances also (as it uses wlan1*
in remove command).
Fix issue by matching full instance name while removing old files.
Signed-off-by: Rajan Vaja <rajan.vaja@gmail.com>
Signed-off-by: Bhargav Patel <br13patel@gmail.com>
From the Tor project page:
obfsproxy is a tool that attempts to circumvent censorship, by
transforming the Tor traffic between the client and the bridge. This
way, censors, who usually monitor traffic between the client and the
bridge, will see innocent-looking transformed traffic instead of the
actual Tor traffic.
This depends on:
- pyptlib (#2053)
- twisted (#2052)
Also, txsocksx (#2058) is necessary to use an outgoing SOCKS proxy,
and having either gmpy2 (#2067) or gmpy (#2051) installed will help
speed up calculations.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Tcpreplay is a suite of free Open Source utilities for editing and
replaying previously captured network traffic. Originally designed
to replay malicious traffic patterns to Intrusion Detection/Prevention
Systems, it has seen many evolutions including
capabilities to replay to web servers.
Pretty useful for testing stuff too.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
for working out the interface name
Working:
ubus -S call network.interface dump|jsonfilter -e "@.interface[@.interface=\"wan\"].l3_device"
Broken:
ubus -S call network.interface dump|jsonfilter -e "@.interface[@.interface=\"wan\"].device"
Fix run tested:
root@wifi:/overlay/upper# ps |grep mini_snmpd
1404 root 980 S /usr/bin/mini_snmpd -n -c public -L Undisclosed -C VGB <admin@victimsofgaybullying.com> -t 1 -a -d /overlay,/tmp -i br-lan,pppoe-w
Before it wasn't using the pppoe interface it was using the parent
interface eth0 twice. Small 1 line fix. Merge at your convenience.
Signed-off-by: Luke McKee <hojuruku@gmail.com>
Also fix a new compilation error, due to upstream changes in the build
system. SUBDIRS= is deprecated when building external kernel modules, use
M= instead to fix compilation.
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Maintainer: Ondrej Caletka / @Oskar456
Compile tested: TurrisOS 3.1 (fork of OpenWRT Chaos Calmer), Trunk (both uClibC and musl)
Run tested: mpc85xx - Turris 1.0 - TurrisOS - no problems observed
Upstream: https://github.com/fln/addrwatch / @fln
Description:
This is a tool similar to arpwatch. It's main purpose is to monitor network
and log discovered ethernet/ip pairings.
The package has been UCIfied, care has been taken to reload the deamon
every time an interface goes up or down.
Signed-off-by: Ondřej Caletka <ondrej@caletka.cz>
freeradius-server version 2.x has been marked End-Of-Life.
This commit adds freeradius-server version 3.0.11 in a new package.
This commit also introduces the option "freeradius3-default"
which activate all modules needed to run radiusd with its default
configuration.
- rlm_digest (HTTP Digest Authentication) has been added
- rlm_unix (System Authentication) has been added
- rlm_attr_rewrite has been deleted
Note that SQL and LDAP support has been disabled.
Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
The default /etc/config/racoon shipped by ipsec-tools lacks an option keyword
on the p2_proposal line, leading to a syntax error when processing the file.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Makes use of all available runtime options that can be passed to
mini_snmpd such as -I listen_on interface
Run-tested on trunk on ar71xx. Please review the init script regarding procd
monitoring interfaces, though everything else due to the conversion to
procd should be and done properly, if not overkill compared to most
other script bundled with openwrt.
The main benefit of all this is now larger routers can run multiple
instances of mini_snmpd on different ports, to get around the MIB hard
coded 4 interface/mountpoint limits.
Due to somewhat lacking dev / package maintainer docs except for
http://wiki.prplfoundation.org/wiki/Procd_reference writing this script
took longer than it should. You can see it's evolution here:
https://github.com/hojuruku/openwrt-packages/blob/mini_snmpd/net/mini_snmpd/files/mini_snmpd.init
If everything in it is found to be sane, please include it to the
openwrt wiki on procd as an example.
Due to procd / uci /sbin/validate_data cbi element datatype (uciname) being used
to check uci config, the configuration file now only takes openwrt uci network names not
physical network names as it did before.
http://git.openwrt.org/?p=packages.git;a=commit;h=783e5578ad104d1ca3c31582add08fc8eb4ad083
Like busybox the package Makefile has depends for all runtime
dependencies needed by the init script. mini_snmpd only depends on libc
squashed commits:
mini_snmpd: fix typo to fix procd triggers calling daemon binary directly instead of init script - misuse of $PROG var
mini_snmpd: enable SSP & mini_snmpd to start by default and listen on lan
mini_snmpd: disable RELRO blocker in Makefile after consulation
mini_snmpd: add smarts to init script to detect if ubusd hasn't started yet
mini_snmpd: fix init script - ubus -S doesn't print meaningful errors to give the user
mini_snmpd: Makefile roll back Makefile PKG_RELEASE to 1 for feng shui
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
From the oldpackages.
Updated to version 3.0.719, new config file to add more options
Rewritten init file to take in account the new config file and
removing a bug when stopping the daemon.
Corrected license information in Makefile
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
UCI commands report errors in parsing coova-chilli
sample configuration file. Fix this issue by using
proper format in configuration.
Signed-off-by: Rajan Vaja <rajan.vaja@gmail.com>
In file included from print.h:25:0,
from linreg.c:24:
util.h:364:32: error: unknown type name 'time_t'
int rate_limited(int interval, time_t *last);
^
Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
Standard assignment is immediate expansion without any extraneous spacing, RFC822 compliant email addresses without any quotation marks and long git hashes
Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
The default busybox config used by OpenWrt does not enable floating
point number support for the sleep applet. This can cause an error when
stopping or restarting strongswan:
sleep: invalid number '0.1'
Replace the float with an integer to fix this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
postrm/postinst symlink mangling is frowned upon
by trunk devs, in addition to packages modifying
the files as other packages during
installation/removal (without a agreed upon mechanism
for coordinating such changes) is prohibited in
most distros.
Further in this case results in wget-ssl failing to conflict
with wget-nossl. As mentioned in the github issue
regarding this (https://github.com/openwrt/packages/issues/2728)
it is also unnessary in current openwrt/lede.
This patch there makes the symlink from the specific
flavour of wget (e.g. wget-ssl) from /usr/bin/wget part
of /install so that they conflict with each other the
way they should, and do not modify the same files
without a delibarate --force-overwrite.
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
add PKG_BUILD_DEPENDS and PKG_CONFIG_DEPENDS and also make the sub
packages select the main package.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
This brings IoTivoity to version 1.1.0
The old @lantiq.com address does not work any more, update to the
@intel.com address.
The removed patches were merged upstream, but there are still some new ones needed.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
davfs2 had hardcoded value for stack protector. If stack protector is disabled
in toolchain, it would break the build. Disabling the hardcoded value, counting
on settings in cross-build system.
Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz>
[bump PKG_RELEASE]
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
lispmob accesses the gnu members of struct udphdr like source and dest
and does not use the posix member names. Instead of using the correct
names just define this as _GNU_SOURCE.
[bump PKG_RELEASE]
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
* fw rule changes:
force_dns now supports multiple lan devices
disable needless force_dns- & forward/output-rules in 'ap mode'
check return codes during adblock chain creation
* simplified the test for a running firewall
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
- fix handling of parameter "is_glue" and "dns_server" to work with luci-app-ddns
- update TLD_names.dat
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* restructured sources
* fix logical glitches in config handling
* many corner case fixes & cosmetics
* show runtime errors in LuCI (in lastrun section)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Until now unbound was always running as root by default. A DNS resolver can
easily run under a non-privileged user.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
The commands aliased by $(INSTALL_BIN) and $(INSTALL_DATA) set good
permissions, unlike a raw file copy.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
The custom list of DNS root servers provided with the package is not necessary.
Unbound ships with a built-in list.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
* rework download/backup/restore handling
* rework firewall handling
* refine whitelist parsing
* changed default null-ip to 198.18.0.1 to prevent conflicts with bcp38
* spread traffic from ad servers (port 80/443) on two uhttpd instances,
this fixes timeouts on sites with many ssl ad server connections, i.e.
youtube.com
* provide statistics & last runtime for LuCI interface
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
Enabling BCP38 causes an iptables rule to be inserted before this rule:
ACCEPT all -- anywhere anywhere ID:66773300 ctstate RELATED,ESTABLISHED
This makes all forwarded packets go through the BCP38 ipset match, which slows
down download speed from 440 Mbit/s to 340 Mbit/s.
Only apply BCP38 match rules if state is NEW.
Bump package version.
Signed-off-by: Török Edwin <edwin@skylable.com>
Bring back Subversion from oldpackages and update to the latest version.
Create prerm script to stop subversion server and remove init script
on uninstall.
Signed-off-by: Donald Rumata <donald.rumata@gmail.com>
Install more development files as those might be used by other software
depending on knot libraries. They are used for example by knot-resolver.
Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
Introduce package for additional experimental scripts for sqm-scripts.
The target is to provide an opportunity to test QoS scripts and qdiscs
still under development. E.g. cake related scripts can be placed here
for testing.
sqm-scripts and luci-app-sqm will pick up the new scripts automatically.
Initially the package contains five cake-related scripts.
The package depends on the main sqm-scripts package.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* new config option 'adb_restricted' to disable updates of the adblock
config during runtime (no flash writes, disabled by default)
* new update function, to apply latest configuration changes if needed
(/etc/init.d/adblock cfgup)
* fix dns redirect rule
* various optimizations
Signed-off-by: Dirk Brenken <dev@brenken.org>
If libuv is present within the build environment, aria2 will fail to build
with the following error:
LibuvEventPoll.cc: In member function 'virtual void aria2::LibuvEventPoll::poll(const timeval&)':
LibuvEventPoll.cc:144:59: error: invalid conversion from 'void (*)(uv_timer_t*, int) {aka void (*)(uv_timer_s*, int)}' to 'uv_timer_cb {aka void (*)(uv_timer_s*)}' [-fpermissive]
uv_timer_start(timer, timer_callback, timeout, timeout);
^
In file included from LibuvEventPoll.h:43:0,
from LibuvEventPoll.cc:44:
.../staging_dir/target-arm_xscale_musl-1.1.14_eabi/usr/include/uv.h:770:44: note: initializing argument 2 of 'int uv_timer_start(uv_timer_t*, uv_timer_cb, uint64_t, uint64_t)'
UV_EXTERN int uv_timer_start(uv_timer_t* handle,
^
Makefile:2271: recipe for target 'LibuvEventPoll.lo' failed
make[6]: *** [LibuvEventPoll.lo] Error 1
Explicitely disable the libuv support in `configure` to avoid picking up this
unwanted dependency.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Patch modified to resolve conflict caused by #2804
This closes#2776
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Assuming the following dns zone configuration for kresin.me:
. 1800 IN NS ns.inwx.de.
home.kresin.me. 1800 IN NS gw.home.kresin.me.
gw.home.kresin.me. 60 IN A 198.51.100.1
Using the example, gw.home.kresin.me is a glue record and used as DDNS
record as well. gw.home.kresin.me points to the OpenWrt installation
where the ddns-scripts are running.
Since ns.inwx.de isn't the authoritative server for home.kresin.me,
a query for the the A record of gw.home.kresin.me will be "forwarded"
to and replied by the authoritative server 198.51.100.1. If the
authoritative server can't be reached, the query times out without any
address returned.
The only way to get the A record of the glue record is to use bind
host in verbose output mode, query ns.inwx.de for gw.home.kresin.me and
evaluate the additional section of the response.
To my knowledge, only bind host in verbose output mode shows the
additional section of the response. Therefore, this features depends on
bind host.
It is not possible to use the bind host verbose mode for all queries.
In verbose mode the "has address" line isn't returned. Grepping for the
hostname might fail if the hostname is CNAME. Grepping for the first
occurrence of an ip-address is way to error prone, since it could
return the ip address of a different record type.
Signed-off-by: Mathias Kresin <dev@kresin.me>
ktutil_funcs.c: In function 'ktutil_delete':
ktutil_funcs.c:75:28: error: 'prev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Signed-off-by: John Crispin <john@phrozen.org>
Add back from oldpackages with fixes for build errors and UCIfication
(for LuCI app submitted in a related PR (against LuCI repo)).
NOTE: Untested packages have been marked with @BROKEN. This can
be undone of others report success with the sniffer
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
If the liblz4 library exists within the build environment, the openconnect
configure will pick it up and start depending on it, leading to the following
build error:
Package openconnect is missing dependencies for the following libraries:
liblz4.so.1
Disable LZ4 support in configure in order to avoid this implicit,
nondeterministic dependency.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Mark the usbip package nonshared so that is built along with the target
specific binaries and not within the SDK environment.
This is needed since the usbip package draws its source files directly
from the kernel tree which is unavailable within the SDK.
Fixes the following build error encountered by the LEDE buildbots:
http://downloads.lede-project.org/snapshots/faillogs/mipsel_1004kc_dsp/packages/usbip/compile.txt
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The most recent developer of netdiscover had self-hosted downloads
but also put the project on SourceForge. The self-hosted site went
down but SourceForge is much more reliable so I have moved the
download URI to SourceForge (md5sum is the same).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
- add DNS lookup support for "drill" and "khost" (Knot DNS) #2637
- new service nsupdate.info (IPv4 and IPv6) #2433
- new services dyndnss.net, dyns.net (IPv4 only)
- new services dnshome.de, goip.de, myonlineportal.net (IPv4 and IPv6)
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* push gnurl, gnutls and libmicrohttpd dependencies down to modules
* use standard UID/GID for gnunet (958/958)
* use GID adjecent (452) to dnsmasq (453) for gnunetdns to allow
using the owner match with a range of GIDs (452-452)
* package new gnunet-social pub/sub CLI tool
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes the following CVEs:
Bug 3020 / CVE-2016-1551: Refclock impersonation vulnerability, AKA: refclock-peering
Reported by Matt Street and others of Cisco ASIG
Bug 3012 / CVE-2016-1549: Sybil vulnerability: ephemeral association attack, AKA: ntp-sybil - MITIGATION ONLY
Reported by Matthew Van Gundy of Cisco ASIG
Bug 3011 / CVE-2016-2516: Duplicate IPs on unconfig directives will cause an assertion botch
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3010 / CVE-2016-2517: Remote configuration trustedkey/requestkey values are not properly validated
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3009 / CVE-2016-2518: Crafted addpeer with hmode > 7 causes array wraparound with MATCH_ASSOC
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3008 / CVE-2016-2519: ctl_getitem() return value not always checked
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3007 / CVE-2016-1547: Validate crypto-NAKs, AKA: nak-dos
Reported by Stephen Gray and Matthew Van Gundy of Cisco ASIG
Bug 2978 / CVE-2016-1548: Interleave-pivot - MITIGATION ONLY
Reported by Miroslav Lichvar of RedHat and separately by Jonathan Gardner of Cisco ASIG
Bug 2952 / CVE-2015-7704: KoD fix: peer associations were broken by the fix for NtpBug2901, AKA: Symmetric active/passive mode is broken
Reported by Michael Tatarinov, NTP Project Developer Volunteer
Bug 2945 / Bug 2901 / CVE-2015-8138: Zero Origin Timestamp Bypass, AKA: Additional KoD Checks
Reported by Jonathan Gardner of Cisco ASIG
Bug 2879 / CVE-2016-1550: Improve NTP security against buffer comparison timing attacks, authdecrypt-timing, AKA: authdecrypt-timing
Reported independently by Loganaden Velvindron, and Matthew Van Gundy and Stephen Gray of Cisco ASIG.
Signed-off-by: Peter Wagner <tripolar@gmx.at>
OpenWrt offers a special 'prelocal' routing table at priority 0.
Use it, so local-to-local DNS traffic also gets redirected properly.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
fwknop Makefile had two conffiles sections. Combine them.
Remove also the whitespace from conffiles section (see #2652)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The conffiles definition in Makefile should not contain leading whitespace.
Remove whitespace from Makefile of motion, dnscrypt-proxy and sstp-client.
Reference to discussion at #2652
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* support more router modes, as long as the firewall and the DNS server
are enabled
* new source sites can be added & changed via awk ruleset in uci config
* source domain count, last update time & overall count will be stored
in uci config
* added 3 new source sites:
ransomware tracker
rolist/easylist
winspy
* switch to minimal inline base64 encoded 1×1 GIF for pixel server
(separate png image no longer needed)
* simplified uci parser
* source download & domain sort optimization
* add whitelist parser with wildcard support
* reduced code size & various cleanups
* updated documentation
Signed-off-by: Dirk Brenken <openwrt@brenken.org>
Create directory which was accidentally left-out during the previous
commit adding the proto handler.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
