Add new globals config section with option local_source.
With this config option the self interface generation will be done now
automatically on hotplug event. You can specify which interface (ip)
sould be used for router traffic. To replace the self intereface in the
config set local_source to "lan".
The default option is none, so it will not change default behavior if a
"self" interface is configured in the network section.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
To know how old the ubus output is, add an age parameter which indicats
how old the check informations on the interface are.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Add new interface config option "inital_state".
If interface comeing up the first time(mwan3 start, boot),
there are now two option for interface behaviour:
- online (default as is now)
Set up interface regardless wether tracking ip are reachable or not.
- offline
Set up interface first to ping tracking ip and if they are reachable set up
the interface completely.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Even though error was fixed the interface checks still fails, if last_resort
was set to blackhole or unreachable.
To fix this issue do not remove failure interface from iptables change on
down event.
Reported-by: Colby Whitney <colby.whitney@luxul.com>
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If two interface have the same prefix "wan" for example "wan" and "wan1"
pgrep returns the PID for wan1 also "pgrep -f mwan3track wan".
Before this fix "wan1" was also killed! This is not what we want.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* print only 'missing plugins support warning' if user really configured
'blacklist' or 'block_ipv6' parameter.
Signed-off-by: Dirk Brenken <dev@brenken.org>
When the strongswan service is running, `ipsec status` returns 0. Check
the return value instead of checking its output.
While at it, remove the [[ ]] bashism, use rereadall instead of
(reread)secrets, and move it inside the if statement.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
In commit 36e073d820, some checks were
added to see if the UCI config file exists and if there are any peers
configured in it. Due to these checks, if /etc/config/ipsec exists, but
contains no enabled peers, strongswan will not be started. This is not
ideal, as a user might want to experiment with the UCI config while
keeping existing connections in /etc/ipsec.conf operational.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Since the strongswan-utils package now only contains the aging ipsec
utility, rename it to strongswan-ipsec.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We currently include the SCEP client in strongswan-utils, which is a
dependency of the strongswan-default meta-package. As it's generally not
recommended to generate keys on embedded devices due to lack of entropy,
move the SCEP client to a separate package, and only depend on it in the
strongswan-full meta-package.
While at it, add scepclient.conf to the package.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We currently include the PKI tool in strongswan-utils, which is a
dependency of the strongswan-default meta-package. As it's generally not
recommended to generate keys on embedded devices due to lack of entropy,
move the PKI tool to a separate package, and only depend on it in the
strongswan-full meta-package.
While at it, add pki.conf to the package.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* Update nmap-suite to 7.60
* Use PKG_HASH as PKG_MD5SUM is deprecated
* Switch download URL to HTTPS
* Add zlib as dependency and link libpcre dynamically
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* Start dnscrypt-proxy from procd interface trigger rather than
immediately in init, to fix a possible race condition during boot and
get rid of rc.local restarts. You can restrict trigger interface(s) by
'procd_trigger' in new global config section.
* tab/whitespace cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add preliminary kresd dns backend support for turris devices,
see readme (experimental / untested!)
* use tld compression for overall list, too
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Adds support for interface tracking using either ping, arping or
httping. This allows to track interface status on networks with filtered
ICMP traffic or simply to monitor data link layer etc.
To facilitate binding to a specified interface its IP address is passed
as a new mwan3track parameter. It's currently required by httping
and possibly by other tools that may be added in the future.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
0.9.1
backend:
* load procd reload trigger only in 'manual' mode
* documentation update
frontend:
* further optimized Station Overview & Scan page,
especially for mobile devices
* add a "Rescan" button in manual mode on overview page
* XHTML fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
I do not use this software any more and due to lack of time, I give the
maintenance responsibility back to the community.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
This commit introduces nlbwmon, the lightweight NetLink BandWidth Montor.
The nlbwmon daemon gathers per-host traffic statistics by querying netlink
accounting data. Due to this approach, the executable is very small and does
not rely on libpcap and CPU intensive raw sockets to monitor traffic.
Besides raw per-host traffic counters, nlbwmon also support rudimentary
traffic classification by observing IP protocols and used port numbers.
Gathered accounting data is stored into a series of database files which
are regularily committed to persistent storage.
Refresh, commit and accounting intervals are freely configurable as well
as the layer7 protocol mapping rules and observed source subnets.
This package also bundles a cli client which can be used to dump the
gathered traffic data as JSON, CSV or plaintext data. A pull request to
add a graphical LuCI frontend for nlbwmon is pending.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The softethervpn does not actually supported CCFLAGS, or other standard
variables, so we need to override CC to include all of those to fix
build errors with external toolchains.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- It's a common practice that assert should be ignored in release build
- Whether to enable ssp should be decided by the config of build system
This was taken from Makefile in shadowsocks/openwrt-shadowsocks.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Package version upgraded to 2.5 with patches:
- Fixed compiler warnings
- Fixed miscalculated response time
- Reduced binary size by stripping unused code
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Notable changes since 3.0.6
f308dde ss-server: fix a use-after-free bug
0b2dce5 ss-redir: fix a mem leak
b7bdb16 ss-local: SOCKS5 UDP associate terminates the connection prematurely
3f0d39a ss-local: use getsockname udp_fd where it applies (fixes local_port==0)
eb30a3d fix possible data loss with salsa20 cipher
0559d8c fix partial nonce data being overwritten
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
The change is mainly for keeping compatibility with old validate_data
before ubox commit ac481cdd999ee84d3f115c33a56397237e95ec64 in Sat Jul
16 14:52:36 2016 +0200. The behaviour change comes with that commit can
be seen with the following command line session
root@LEDE:/usr/bin# validate_data network interface wan 'disabled:bool:false'
network.wan.disabled is unset and defaults to bool false
disabled=0; root@LEDE:/usr/bin#
root@OpenWrt:/# validate_data network interface lan 'disabled:bool:false'
disabled='false'; root@OpenWrt:/#
This will cause shadowsocks-libev in current master branch fail on OpenWrt
15.01 though they actually should only use packages from the 15.01 branch...
Fixesopenwrt/packages#4614
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
backend:
* handle errors due to misconfigured uplinks
* various bugfixes
luci frontend:
* add a powerful wireless station manager to edit and delete existing
interfaces or scan for new uplinks
Signed-off-by: Dirk Brenken <dev@brenken.org>
New upstream release includes fixes for the following security issues:
* CVE-2017-3140: With certain RPZ configurations, a response with TTL 0 could
cause named to go into an infinite query loop
* CVE-2017-3142: An error in TSIG handling could permit unauthorized zone
transfers or zone updates.
* CVE-2017-3143: An error in TSIG handling could permit unauthorized zone
transfers or zone updates.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
afraid.org has a new update API with better IPV6 support. It needs to be
specifically enabled for each domain, so the original v1 api has been
Signed-off-by: Thomas Guyot-Sionnest <dermoth@aei.ca>
For now building from git using latest SHA (commits are relatively
infrequent). Set priority to come up immediately after network
interfaces are brought up. Patches have been submitted upstream
(but not yet accepted) to fix:
* a somewhat cross-compile unfriendly makefile;
* a header inclusion issue which causes MUSL compilation warnings;
* using the somewhat arcane posix_fallocate() in favor of the
more ubiquitous ftruncate() system call instead.
Hopefully the next release will include our submitted fixes and
we can transition to a numbered release.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
If lighttpd's scripts are rotated from under it while they're still open,
this will cause some weird things to happen. Give it a heads up that
the logs have moved.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Add enabled config option in the global uci section; it allows to put into
place the snmpd config but not yet start the netsnmp daemon.
If config option is unset; netsnmp daemon will be started as before.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Primarily a bugfix release for a CVE that doesn't affect lede/openwrt,
but also includes some websockets perfomance fixes.
Release notes at https://mosquitto.org/2017/07/version-1-4-13-released/
Signed-off-by: Karl Palsson <karlp@etactica.com>
This brings the route_allowed_ips option into parity with the addresses
option, which makes these same assumption. The parsing selection is made
to be identical between these two settings.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* wait for hostapd comes up during boot
* remove needless ubus call during script startup
* remove needless iwinfo check (covered by package dependency)
Signed-off-by: Dirk Brenken <dev@brenken.org>
- Selecting only a single or subset of all components of shadowsocks-libev is
now possible (this is the main motivation behind the rewrite)
- Configuring multiple instances of the same component is now also possible
- Same option names as with the json config
- Unified configuration generation method for each component
- Add support for ss-local, ss-tunnel, ss-server
- Most data validation is now done with validate_data
- USE_PROCD=1
- Update ss-rules with the one from shadowsocks/luci-app-shadowsocks
- Add README.md
- Set myself as the maintainer
Addresses #4435
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* made DNS restart conditional (compare list hash values),
to prevent needless restarts of the DNS backend
Signed-off-by: Dirk Brenken <dev@brenken.org>
Apparently, even if you don't select the `openvswitch-python` package,
Python still gets built (for the target build).
But, if the python dependencies are conditional on the
`PACKAGE_openvswitch-python` symbol then they aren't build.
This should improve build times, if you only want to build the
`openvswitch` package.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Seems it was not failing for me because it was probably
using my host Python, which may have the `six` package
available.
This patch enforces the use of the packaged Python.
That way, it's more consistent that the python-six
package is available.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The most important change is local redirects being disabled by default.
There is an option called cgi.local-redir that allows enabling this
optimization manually back if needed.
Local redirects were initially introduced in 1.4.40 but caused many
problems for *some* web services.
One of problems is breaking Post/Redirect/Get design pattern. With
redirects handled on server side there is no browser redirection making
it "lose" the POST data.
Another possible issue are HTML forms with action="". With CGI local
redirects browser may be sending form data to the wrong URL (the one
that was supposed to redirect the browser).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
From upstream's changelog:
* main: annotate init/exit functions to save memory
* selftest: remove antique siphash self test
* haskell: re-add updated haskell example
* socket: use ip_rt_put instead of dst_release
* device: avoid double icmp send on routing loop
* compat: clean up cruft
* global: cleanup IP header checking
* compat: do not export symbols unnecessarily
Various cleanups and updates.
* device: netdevice destruction logic change for 4.12
When Linux 4.12 is released next week, we're good to go.
* device: only use one sleep notifier
Rather than have a separate sleep notification for every interface, we now
have a single notifier for every interface. This improves performance,
especially when creating many interfaces at once.
* device: remove icmp conntrack hacks
We're moving hacks upstream the proper way, and then backporting them to
compat.
* receive: extend rate limiting to 1 second after under load detection
After we determine that we're under load, we now wait 1 second before not
being under load again, a timer which is global across all interfaces on a
given system.
* curve25519: satisfy sparse and use short types
* curve25519: keep certain sandy2x functions in C
Certain functions have been made into C, which should improve stack frames and
reliability.
* ratelimiter: rewrite from scratch
This is a big change. We no longer rely on x_tables or xt_hashlimit, instead
using a super minimal and sleek token bucket ratelimiter. This works much
better than the old cruft and should allow us to run more places. It also has
the benefit of being global, so that it's possible to have thousands of
interfaces without killing the system with separate GCs and vmallocs, which is
what happened prior.
* socket: verify saddr belongs to interface
We now more quickly react to changes of the v4 routing table, by ensuring that
the sticky source address is actually still valid.
* wg-quick: properly match IPv6 endpoint
wg-quick now works better with IPv6.
* wg-quick: use printf -v instead of namerefs for bash 4.2
This adds support for old bash, which means wg-quick should be generically
"bash 4 and up". I'm not happy about this but EL7 uses old bash, so we're
stuck with it.
* compat: support EL7.3
Support for RHEL, CentOS, ScientificLinux, and so forth.
* compat: support Ubuntu 14.04
An old crufty Ubuntu is now supported, since it's LTS.
* add bind support (see readme)
* export all blocked domains in one central file (adb_list.overall)
* prerequisite for proper bind support
* much faster sort operation with less memory consumption
* backups are still handled per source separately,
to be more flexible in adding/removing block list sources
* add additional 'wan6' interface trigger in default configuration
* various small fixes & optimizations
Signed-off-by: Dirk Brenken <dev@brenken.org>
If more then one interface get up/down at once mwan3 could be in a
undefined state, because more then one mwan3 hotplug script are running
and editing the iptables.
Lock the critical section should solve this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
A lot of autoconf-based scripts expect --with-foo-dir=$(STAGING_DIR)/usr
and break if they can't find bin/foo-config as a child of that path.
Putting things in $(STAGING_DIR)/host/bin seems to be suboptimal; I
could change the install path but there's no saying what that would
break.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
With this patch the unbound init routines manage resolv.conf if and only if
when unbound will listen on 127.0.0.1#53 and dnsmasq is not.
Also logs some cases where config values are overriden with sane defaults.
Fixes (partially) LEDE FS#785
Fixesopenwrt/packages#4487
Signed-off-by: Paul Oranje <por@xs4all.nl>
luci2-io-helper: bugfix buckup script read timeout
Reading files from stdin will block for ever. The uhttpd is killing the
backup process after script_timeout.
Switching read to non blocking mode and add a waitpid for the slave
process does not end in a script_timeout anymore.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* use iwinfo instead iw for wlan scanning,
scanning now works on radio-level
* enhance multiple radio support:
* support STA-only radio configurations,
e.g first radio with local AP, second radio
with a bunch of STAs (without APs)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Add config support which allow snmpd to take a more active role by sending
traps.
Following config options are supported which map directly on snmpd directives:
-trapcommunity
-trapsink
-trap2sink
-informsink
-authtrapenable
-v1trapaddress
-trapsess
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
- use exec directly to eliminate a level in the process tree
- use "$@" instead of "$*" to pass arguments to openconnect
According to openconnect(8), openconnect will call vpnc-script to
cleanup before quit when it received SIGINT(2) and will quit immediately
when it received SIGTERM (the default signal by kill command)
Before and after the change, openconnect process will be killed first
with SIGINT sent from netifd. This was decided by the
'proto_kill_command "$config" 2' notify call in the proto script.
SIGKILL is the only other signal that can be sent from netifd when the
process did not quit on SIGINT on time. There should be no need to trap
on signal 1 3 6 9 (HUP QUIT ABRT KILL)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fixes build errors with external toolchains:
[ 33%] Building C object CMakeFiles/cgi-io.dir/main.c.o
/home/florian/dev/openwrt/trunk/build_dir/target-mipsel-unknown-linux-gnu_glibc/cgi-io/main.c:30:21:
fatal error: libubus.h: No such file or directory
#include <libubus.h>
^
compilation terminated.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
According to openconnect --help output:
-m, --mtu=MTU Request MTU from server
--base-mtu=MTU Indicate path MTU to/from server
Fixes#2099 by allowing setting tunnel mtu
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
It was introduced with 41f8d5465 ("openconnect: fix a couple of minor
things and add an interface option") and not needed since 4083de9d7
("openconnect: use proto_add_host_dependency")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
We would not be able to search for pcap.h because CFLAGS are not passed
from src/Makefile down to src/wps/Makefile:
make[4]: Entering directory
'/home/florian/dev/openwrt/trunk/build_dir/target-mipsel-unknown-linux-gnu_glibc/reaver-1.4/src/wps'
mipsel-linux-gnu-gcc -I../utils -I ../ wps_attr_build.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_attr_parse.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_attr_process.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_common.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_dev_attr.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_enrollee.c -c
mipsel-linux-gnu-gcc -I../utils -I ../ wps_registrar.c -c
In file included from ../misc.h:41:0,
from wps_registrar.c:27:
../defs.h:43:18: fatal error: pcap.h: No such file or directory
#include <pcap.h>
^
compilation terminated.
Makefile:28: recipe for target 'wps_registrar.o' failed
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
There are no other "echo" debug lines in this file, and it seems
clear that this one was accidentally left as a debugging line,
since it misspelled "dependency". So, we just remove this line.
We don't bump the package version, though, because this is
pretty inconsequential.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
From upstream's changelog:
* timers: queue up killing ephemerals only if not already
We fix up a small detail in the timer logic that changed during the last
snapshot.
* receive: trim incoming packets to IP header length
Packets are now trimmed to their actual length, not their length+padding,
before handing to the rest of the network subsystem, so that packets look
pretty in tcpdump. This doesn't actually affect what userspace sees, since the
kernel trims it at a later stage, but it does make pcaps a bit nicer to use.
* curve25519: use more standard label convention in asm
This ensures that perf(1) shows the function name instead of the label name.
* compat: remove padata hotplug code
Fixes building on kernels that have HOTPLUG enabled but no PADATA support.
* config: add new line for style
* device: do-while assignment style
* peer: explicitly initialize atomic
Style.
* noise: fix race when replacing handshake
Handle a situation in which three peers, all running on the same system, begin
a handshake with all three of each other, at exactly the same time, on a
multi-CPU system.
* random: wait for random bytes when generating nonces and ephemerals
We've been working with upstream to add a new API to the kernel for ensuring
that the RNG actually is seeded. Until they merge it for 4.13, we provide a
poly-fill to the compat code. This means that WireGuard will block during
handshakes until the RNG has enough entropy, so that it's never in a
circumstance in which ephemeral keys are generated from bad randomness.
* go test: properly pad message
* go test: correct tai64n and formatting
* external-tests: add keepalive packet
* go test: use x/crypto for blake2s now that we have 128-bit mac
* external-tests: trim the fat
Improvements for the external tests.
* wg-quick: make sure we have empty table for both v6 and v4
* wg-quick: match ipv6 default route more broadly
Tiny nits with wg-quick, one of which should now allow multiple v6-only
wg-quick instances running at the same time.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
backend:
* cosmetics
frontend:
* "Save & Reply" now distinguish between normal and manual/backup mode
and triggers an appropriate reload or a start action
Signed-off-by: Dirk Brenken <dev@brenken.org>
Script priority adjusted.
Custom memory management turned off to save some memory on low-end device.
Signed-off-by: Antonio Paunovic <antonio.paunovic@sartura.hr>
backend:
* add new 'manual mode' to re-use blocklist backups during startup,
get fresh lists only via manual reload or restart action
* additional free memory check during dns restart to prevent OOM errors
* removed palevo tracker from default config,
this tracker has been discontinued
* cosmetics
LuCI frontend (see luci repo):
* add new 'manual mode' under extra options
Signed-off-by: Dirk Brenken <dev@brenken.org>
The smartsnmpd SConstruct file only accepts setting CFLAGS and does not
use CPPFLAGS, so pass both down using CFLAGS.
This fixes build errors with external toolchains that don't
automatically search for headers in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Make sure we pass down TARGET_CPPFLAGS and TARGET_LDFLAGS to fix build
with external toolchains that don't automatically search for headers and
libraries in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This was removed in LEDE commit 0b7ed65cec8084bb98ae0e2758b7aca6c447cd4b
("kernel: remove out of tree direct-io disable hack")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
After checking in the ipkg-install dir of netatalk,
it seems that the permissions it sets to the conf-files
are 644.
# ls -la lede/build_dir/target-mips_24kc_musl/netatalk-3.1.11/ipkg-install/etc
-rw-r--r-- 1 sandu sandu 226 iun 5 20:53 afp.conf
-rw-r--r-- 1 sandu sandu 1948 iun 5 20:53 dbus-session.conf
-rw-r--r-- 1 sandu sandu 25037 iun 5 20:53 extmap.conf
While the Package/netatalk/install build rule overrides
them to 600.
According to
* https://github.com/openwrt/packages/issues/4318
* https://forum.lede-project.org/t/help-with-apple-filesharing-protocol-for-time-machine/3259/5
this is a problem in some setups.
So, this patch changes them to what the netatalk
package creators intended initially (i.e. 644).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The earlier commit ea119211b2 removed 'dsa' as one of the ssh_host_*_key
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The author (@pprindeville) of the original commit noted that the wrong
commit was picked, see
325b7d2cd2 (commitcomment-22387528)
"Err... looks like the wrong fix got committed. I was hoping that this
commit d902e5d would have gone in instead."
This reverts commit 325b7d2cd2.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes the following build error with an external toolchain:
./bld/sqlite3.o: In function `fts5Bm25Function':
sqlite3.c:(.text+0x27234): undefined reference to `log'
./bld/piechart.o: In function `piechart_render':
piechart_.c:(.text+0x430): undefined reference to `sincos'
piechart_.c:(.text+0x47c): undefined reference to `sincos'
piechart_.c:(.text+0x548): undefined reference to `sincos'
collect2: error: ld returned 1 exit status
src/main.mk:526: recipe for target 'fossil' failed
make[3]: *** [fossil] Error 1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This backports a patch that has been accepted upstream in linuxptp:
8b61aa2c3f3103db1d4ca1d1e49bb4f8831c1abf ("udp: Avoid including
netdb.h") to fix build errors with external glibc toolchains that
provide rpc/types.h.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Conserver is an application that allows multiple users to use
serial consoles at the same time, with logging. It has a client-
server design which makes it easy to manage a distributed set
of serial consoles. Logging makes post-crash analyses easier.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Standard assignment is immediate expansion without any extraneous spacing, RFC822 compliant email addresses and consistent section assignments
Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Peter Wagner <tripolar@gmx.at>
From upstreams changelog:
This rather large snapshot touches quite a few sensitive areas, so I'm
releasing it now rather than later to receive feedback on any possible issues.
It also contains fixes, so everybody should upgrade.
* man: fix psk mention in wg-quick man page
* man: update wg-quick(8) to show Debian resolvconf braindamage
Documentation cleanups.
* wg-quick: use src routing for default routes in v6
ip-rule(8) doesn't do the right thing with source addresses, unless we
explicitly set it inside the route. This fixes wg-quick on IPv6 systems.
* curve25519: actually, do some things on heap sometimes
* curve25519: align the basepoint to 32 bytes
* curve25519: add NEON versions for ARM
* data: enable BH during parallel crypto on ARM/NEON
* chacha20poly1305: move constants to rodata
* chacha20poly1305: add NEON versions for ARM and ARM64
We now have faster primitives on ARM and ARM64 processors, which should
improve performance.
* handshake: process in parallel
Handshakes are now processed in parallel using all cores, which should improve
throughput during a storm.
* noise: no need to store ephemeral public key
* noise: precompute static-static ECDH operation
We can precompute the ECDH(s, s) calculation, which improves handshake
initiation message performance by double.
* style: spaces after for loops
* peer: use iterator macro instead of callback
The most unreadable C ever produced. It might be wise to find a sexier-looking
alternative at some point.
* compat: remove warning for < 4.1
* compat: ship padata if kernel doesn't have it
The usual array of annoying compat things.
* rust test: convert screech test to snow
* rust test: add icmp ping
We now use Jake's snow library for Noise in the test, which we've expanded to
complete a ping.
* config: do not error out when getting if no peers
* tools: allow creating device with no peers
Fixing some small things in the tool/config interaction.
* device: keep going when share_check fails
* routingtable: remove unnecessary check in node_placement()
* config: it's faster to memcpy than strncpy
* timers: fix typo in comment
Nits.
* debug: print interface name in dmesg
For those who compile with `make debug`, you'll be happy to see a bit better
information in dmesg.
* timers: rework handshake reply control flow
* timers: the completion of a handshake also is on key confirmation
* timers: reset retry-attempt counter when not retrying
Tightening up our timer implementation, which is quite important.
Signed-off-by: Dan Luedtke <mail@danrl.com>
Since we're using the kernel's module, this is
un-necessary.
Should speed up the build a bit.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Admittedly I never used those Python libs.
And the setup I was trying it on, did not have
the Python interpreter packaged, so these build failures
went un-noticed.
That's my fault for not trying it out properly on
a full LEDE repo, with all packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Add UCI section general which holds the uci parameter network defining on
which interface(s) the snmp agent is reachable for inbound snmp requests
in case the firewall zone does not allow INPUT traffic by default.
For the different zones to which the different interfaces belong firewall
procd input rules are created making the snmp agent reachable on udp port
161.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Base LEDE/OpenWrt UCI for dnsmasq provides for DNS override in
/etc/config/dhcp. It is desired to be able to use dnsmasq and
Unbound as transparently as possible. Option 'add_extra_dns'
will pull 'domain', 'mxhost', 'srvhost, and 'cname' from base.
netifd/procd have an interaction with DHCPv6/RA on WAN (FS#713).
Minor IP6 parameter updates can cause Unbound reload events every
few minutes. List option 'trigger' selects which interfaces may
cause reload. For example 'lan', 'wan' but not 'wan6'.
Squash other cosmetics.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Below are changes in the packaging method
- Use tarball provided by the upstream project maintainer instead of
cloning the whole git-repo
- Drop openssl variant as it was deprecated then removed by the
upstream project
- Add dependency on libev, libsodium, libudns as they are not bundled
with the source code anymore
Addresses issue #4191
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Convert init-script to procd and allow to configure
isc-dhcp-server via UCI. Allow most by-network and by-host options
supported by dnsmasq.
User-defined dhcp-options are not supported yet, neither are tags.
Existing configurations with use-edited /etc/dhcpd.conf are still
respected, hence to enjoy the new features you have to migrate
your configuration to UCI and delete /etc/dhcpd.conf.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* made wget default parms compatible with older program versions
* shift dns detection routine to simplify dns override,
just set 'adb_dnslist' to force a particular backend priority
(default: 'dnsmasq unbound')
* reduce ubus polling during dns detection
Signed-off-by: Dirk Brenken <dev@brenken.org>
* always update the connection status, even in case of an error
* merge multiple ubus network calls in central check routine
Signed-off-by: Dirk Brenken <dev@brenken.org>
* Update to 1.9.5
* Use PKG_HASH instead of PKG_MD5SUM
* Add dnscrypt-proxy github link in PKG_SOURCE_URL
Signed-off-by: Damiano Renfer <damiano.renfer@gmail.com>
If mwan3track will not stop immediately after sending the kill signal,
the clean_up handler will delete the pid file later while the new mwan3track is
already running.
This could result in a situation that mwan3track is running
more then once because the old mwan3track service could not be killed,
because the pid file is missing.
Using pgrep to kill all mwan3track for the tracked interface and not using
pid file should fix this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This change includes fixes for several security issues:
* CVE-2017-3138: rndc "" could trigger an assertion failure in named.
* CVE-2017-3137: Some chaining (i.e., type CNAME or DNAME) responses to
upstream queries could trigger assertion failures.
* CVE-2017-3136: dns64 with break-dnssec yes; can result in an assertion
failure.
* CVE-2017-3135: If a server is configured with a response policy zone
(RPZ) that rewrites an answer with local data, and is also configured
for DNS64 address mapping, a NULL pointer can be read triggering a
server crash.
* CVE-2016-9444: named could mishandle authority sections with missing
RRSIGs, triggering an assertion failure.
* CVE-2016-9131: named mishandled some responses where covering RRSIG
records were returned without the requested data, resulting in an
assertion failure.
* CVE-2016-9131: named incorrectly tried to cache TKEY records which could
trigger an assertion failure when there was a class mismatch.
* CVE-2016-8864: It was possible to trigger assertions when processing
responses containing answers of type DNAME.
* CVE-2016-6170: Added the ability to specify the maximum number of
records permitted in a zone (max-records #;). This provides a mechanism
to block overly large zone transfers, which is a potential risk with
slave zones from other parties.
* CVE-2016-2776: It was possible to trigger an assertion when rendering a
message using a specially crafted request.
* CVE-2016-2775: Calling getrrsetbyname() with a non absolute name could
trigger an infinite recursion bug in lwresd or named with lwres
configured if, when combined with a search list entry from resolv.conf,
the resulting name is too long.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
fixes webroot to be defined as
_currentRoot='/www'
instead of being interpreted as
_currentRoot='"/www"'
Signed-off-by: Aleksei Nosachev <nos1609@hotmail.com>
* create /etc/vsftpd directory for extra config files
like userlist, certificate and key
* modify config file to use that directory
* include that directory in conffiles for backup
* use PKG_HASH
* update URL
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
backend:
* various small fixes & optimizations
LuCI frontend (see luci repo):
* Limit Blacklist/Whitelist Online editing to max. 512 KB, approx.
20.000 domains per list
* Automatically refresh the overview page after button onclick event,
e.g. 'Suspend/Resume' or 'Save & Apply'
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Notes:
- drop un-needed patches
- bump kernel support up to 4.9
- switch from git repo to release tarball
- use OVS intree kernel module ; seems that using the kernel module
from the package has certain issues due to the glue/backport code
that tries to adapt to many kernel versions and has a potential
to mess up ; not to mention, the glue code makes the kmod
a few times larger than it should be
- tested on x86_64 VM
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Full changelog available at:
https://mosquitto.org/2017/02/version-1-4-11-released/
Mostly ipv6 and websockets fixes, but requires a patch (submitted
upstream) to work around an accidental glibc dependency upstream.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Adds the "notifications" option which is important when connecting
mosquitto to rabbitmq for instance.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Earlier, PROVIDES handling was clarified for the broker and the library.
Use the same style to properly provide the -client-ssl and -client-nossl
packages.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Added a new config entry udp_port to split UDP port from TCP. This is
useful when particular port is blocked by the ISP.
udp_port falls back to port if not set to be compatible with current
config file.
Also fixed an ifname typo from the last commit.
Signed-off-by: Qian Sheng <billsq@billsq.me>
If netifd set an interface up/down which is not tracked by mwan3 the
connected network of that interface should regardless be added/removed to the
mwan3_connected ipset.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
For configurations where another web server is running on port 80, running
acme.sh in standalone mode fails. Try to detect this and refuse to run; and
allow the user to configure a webroot directory to use the running webserver for
certificate verification.
This also updates acme.sh to the latest version.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
- Moves /etc/freeradius3/sites-{enabled,available}/inner-tunnel to be part of
the freeradius3-mod-eap package. This prevents conflicts between
freeradius3-mod-eap-peap and freeradius3-mod-eap-ttls which both included the
file before. This fixes LEDE bug FS#678.
- Change the demo cert validity to be 1 year instead of 60 days. Should keep the
cert valid for the duration of the LEDE release cycle (with some slack). This
fixes#4239.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
* add "adb_forcedns" to redirect all dns requests
to local resolver (disabled by default)
* add "adb_forcesrt" to enable overall sort / duplicate removal
on low memory devices with less than 64 MB RAM (disabled by default)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer misuse ubus/procd service object for travelmate runtime
information, now save all required information directly
in a JSON file/format
* new 'status' init command to print runtime information
* add a configurable interface trigger timeout for
nested & slow modem/router setups, set 'trm_triggerdelay' accordingly
* change start priority & refine reload timings
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* change start priority to get all interface trigger events, even on
fast hardware
* made default trigger delay more conservative to fix possible start up
issues
Signed-off-by: Dirk Brenken <dev@brenken.org>
As reported by @thornley-touchstar, there are some issues in the
showshortport and showport commands on the monitoring channel.
After short dicussion with upstream, the following patches were merged
upstream to fix the issue(s).
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
darkstat's configure script searches for libbsd for different routines,
so if it manages to pick it up, make sure the dependency is reflected.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Use newest acme.sh release (2.6.8).
Remove dependency on ca-certificates and add dependency on ca-bundle.
Update environment variable.
Signed-off-by: Daniel Halmschlager <da@halms.at>
* no longer misuse ubus/procd service object for adblock runtime
information, now save all required information directly
in a JSON file/format (/tmp/adb_runtime.json)
* new 'status' init command to print runtime information
* add a configurable interface trigger timeout for
nested or slow modem/router setups,
set 'adb_triggerdelay' accordingly (default 1 second)
* add support for pure http download utilities like wget-nossl
or uclient-fetch without libustream-ssl (http donwloads only!)
* fix stop action
* fix enabled/disabled action
* fix country code in regional list for china
* LuCI update to reflect all changes
Signed-off-by: Dirk Brenken <dev@brenken.org>
If interface is getting down by netifd (unplug ethernet cable)
mwan3track will not recognize this change. It will also generate an
additional down event when he notice does his tracking interface is offline.
Mwan3track will now be informed by a signal (trap) USR1 during down event
that the interface is already down. An additional down event will not be
generated.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Changelog:
* Fixed a regression of 1.6.4 which caused a crash in modperl/modpython
(not packaged)
* Fixed the behavior of verbose command in the sasl module.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
This commit fixes bugs, cleans and enhances init.d script:
1. The first disk and interface was passed to mini_snmpd with extra
leading space.
This bug caused the first monitored disk and interface to be
inaccessible by SNMP daemon.
2. Automatically reload deamon if one of monitored interfaces goes
up/down.
Since mini_snmpd reads interface list only at startup, it won't
detect any interface which appeared after the daemon was started.
Fortunately we can use procd interface triggers to automatically
restart the daemon.
3. Replace hand-written direct ubus calls and json data filtering with
standard network functions.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* re-order all regional lists in adblocklist/easylist format
* add polish blocklist
* add chinese blocklist
* lists called now 'reg_<ch|pl|ro|ru>'
* changed interface trigger default in config to 'wan' only
* update / sync LuCI frontend (see luci repo for details)
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
[RELEASE] Released version 1.7.5 due to bug in compression
Released version 1.7.5 with the following main changes :
- BUG/MEDIUM: peers: fix buffer overflow control in intdecode.
- BUG/MEDIUM: buffers: Fix how input/output data are injected into buffers
- BUG/MEDIUM: http: Fix blocked HTTP/1.0 responses when compression is enabled
- BUG/MINOR: filters: Don't force the stream's wakeup when we wait in flt_end_analyze
- DOC: fix parenthesis and add missing "Example" tags
- DOC: update the contributing file
- DOC: log-format/tcplog/httplog update
- MINOR: config parsing: add warning when log-format/tcplog/httplog is overriden in "defaults" sections
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
haproxy's Makefile already happens include/ after specifying PCRE_DIR
which would result in the following build errors on an external
toolchain that does not automatically search for headers in
$(STAGING_DIR):
mipsel-linux-gnu-gcc -Iinclude -Iebtree -Wall -O2 -g
-fno-strict-aliasing -Wdeclaration-after-statement -DBUFSIZE=16384
-DMAXREWRITE=1030 -DSYSTEM_MAXCONN=165530 -DCONFIG_HAP_LINUX_SPLICE
-DTPROXY -DCONFIG_HAP_LINUX_TPROXY -DCONFIG_HAP_CRYPT -DUSE_ZLIB
-DENABLE_POLL -DENABLE_EPOLL -DUSE_CPU_AFFINITY -DASSUME_SPLICE_WORKS
-DUSE_ACCEPT4 -DNETFILTER -DUSE_GETSOCKNAME -DCONFIG_REGPARM=3
-DUSE_OPENSSL -DUSE_SYSCALL_FUTEX -DUSE_LUA
-I/home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/lua-5.3.3/include
-DUSE_PCRE
-I/home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/include/include
-DUSE_PCRE_JIT -DCONFIG_HAPROXY_VERSION=\"1.7.4-patch02\"
-DCONFIG_HAPROXY_DATE=\"2017/04/01\" \
-DBUILD_TARGET='"linux2628"' \
-DBUILD_ARCH='""' \
-DBUILD_CPU='"generic"' \
-DBUILD_CC='"mipsel-linux-gnu-gcc"' \
-DBUILD_CFLAGS='"-O2 -g -fno-strict-aliasing
-Wdeclaration-after-statement -DBUFSIZE=16384 -DMAXREWRITE=1030
-DSYSTEM_MAXCONN=165530"' \
-DBUILD_OPTIONS='"USE_LINUX_SPLICE=1 USE_LINUX_TPROXY=1
USE_ZLIB=yes USE_REGPARM=1 USE_OPENSSL=1 USE_LUA=1 USE_PCRE=1
USE_PCRE_JIT=1"' \
-c -o src/haproxy.o src/haproxy.c
In file included from include/types/proxy.h:33:0,
from include/proto/log.h:32,
from include/common/cfgparse.h:29,
from src/haproxy.c:65:
include/common/regex.h:31:18: fatal error: pcre.h: No such file or
directory
#include <pcre.h>
Fix this by stripping the additional include/ being added.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Some external toolchaind don't automatically search for headers in
$(STAGING_DIR), make sure we do pass TARGET_CPPFLAGS as appropriate.
This fixes build errors such as:
mipsel-linux-gnu-gcc -O2 -Wall -Wextra -DLUA_COMPAT_5_2 -DLUA_USE_LINUX
-c -o lua.o lua.c
lua.c:80:31: fatal error: readline/readline.h: No such file or directory
#include <readline/readline.h>
^
compilation terminated.
<builtin>: recipe for target 'lua.o' failed
make[6]: *** [lua.o] Error 1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes build errors with toolchains that don't automatically search for
headers in STAGING_DIR (such as external toolchains) resulting in the
following build failures:
mipsel-linux-gnu-gcc -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc
-fno-caller-saves -Wno-unused-result -D_FORTIFY_SOURCE=1 -Wl,-z,now
-Wl,-z,relro -DUSE_SSL_CRYPTO -c options.c
In file included from options.c:62:0:
auth_algo.h:53:26: fatal error: openssl/hmac.h: No such file or
directory
#include <openssl/hmac.h>
^
compilation terminated.
Makefile:95: recipe for target 'options.o' failed
make[4]: *** [options.o] Error 1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* rework automatic mode (active scan/re-connection handling):
* much more procd & resource friendly
* now enabled by default
* save runtime information in ubus service (data section)
* final backend preparation for new LuCI-GUI (still WIP!)
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
Use CFLAGS_DEBUG which is already used for TARGET_CFLAGS to also pass
TARGET_CPPFLAGS.
This fixes build issues with toolchains that don't automatically search
for header files (e.g: sys/capability.h), such as stbgcc-4.8-1.5
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This allows users to use an external config file if required (for
example matching packets based on SNI hostname or REGEX patterns).
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Mircea Horea IONICĂ <mionica@gmail.com>
[RELEASE] Released version 1.7.4
Released version 1.7.4 with the following main changes :
- MINOR: config: warn when some HTTP rules are used in a TCP proxy
- BUG/MINOR: spoe: Fix soft stop handler using a specific id for spoe filters
- BUG/MINOR: spoe: Fix parsing of arguments in spoe-message section
- BUG/MEDIUM: ssl: Clear OpenSSL error stack after trying to parse OCSP file
- BUG/MEDIUM: cli: Prevent double free in CLI ACL lookup
- BUG/MINOR: Fix "get map <map> <value>" CLI command
- BUG/MAJOR: connection: update CO_FL_CONNECTED before calling the data layer
- BUG/MEDIUM: ssl: switchctx should not return SSL_TLSEXT_ERR_ALERT_WARNING
- BUG/MINOR: checks: attempt clean shutw for SSL check
- CONTRIB: tcploop: add limits.h to fix build issue with some compilers
- CONTRIB: tcploop: make it build on FreeBSD
- CONTRIB: tcploop: fix time format to silence build warnings
- CONTRIB: tcploop: report action 'K' (kill) in usage message
- CONTRIB: tcploop: fix connect's address length
- CONTRIB: tcploop: use the trash instead of NULL for recv()
- BUG/MEDIUM: listener: do not try to rebind another process' socket
- BUG/MEDIUM: filters: Fix channels synchronization in flt_end_analyze
- BUG/MAJOR: stream-int: do not depend on connection flags to detect connection
- BUG/MEDIUM: connection: ensure to always report the end of handshakes
- BUG: payload: fix payload not retrieving arbitrary lengths
- BUG/MAJOR: http: fix typo in http_apply_redirect_rule
- MINOR: doc: 2.4. Examples should be 2.5. Examples
- BUG/MEDIUM: stream: fix client-fin/server-fin handling
- MINOR: fd: add a new flag HAP_POLL_F_RDHUP to struct poller
- BUG/MINOR: raw_sock: always perfom the last recv if RDHUP is not available
- DOC/MINOR: Fix typos in proxy protocol doc
- DOC: Protocol doc: add checksum, TLV type ranges
- DOC: Protocol doc: add SSL TLVs, rename CHECKSUM
- DOC: Protocol doc: add noop TLV
- MEDIUM: global: add a 'hard-stop-after' option to cap the soft-stop time
- BUG/MINOR: cfgparse: loop in tracked servers lists not detected by check_config_validity().
- MINOR: server: irrelevant error message with 'default-server' config file keyword.
- MINOR: doc: fix use-server example (imap vs mail)
- BUG/MEDIUM: tcp: don't require privileges to bind to device
- BUILD: make the release script use shortlog for the final changelog
- BUILD: scripts: fix typo in announce-release error message
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
Update vnStat to 1.17 which fixes database issue.
Remove unecessary patch
Based on:
commit 79b6e9dc61 by
Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
If mwan3track detects a failure the interval check will change to
"failure_interval" value until this interface is declared "offline".
After interface gets "offline" normal "interval" value is used again.
If interface ping is successful again "recovery_interval" value is used until
interface is declared "online" again.
Using the different intervals will accelerate the wan line detections on
failure and recovery.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
procd interface triggers may be busy. Unbound hard restarts will
flush the cache. This might happen frequently depending on how
interface triggers occur.
Change the procd trigger to reduce occurences. Load this trigger
prior to netifd (START=20), but only truly start Unbound from
the trigger rather than immediately in init. Clean up log entries
in scripts after Unbound, NTP, and DNSSEC are established.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
* revamp LuCI GUI (see luci repo for details)
* integrated runtime statistics in normal adblock ubus service instance
(see readme)
* simplified boot/init
* no longer use raw interface trigger
* use only network interface trigger, pre-configured for
'wan/wwan/lan' interfaces (see readme)
* fixed a reload issue
* removed switch to disable tld compression (seems to be pretty stable)
* muted awk parser if source list contains incorrect records
* raise dns backend timeout to 20 seconds
* documentation update
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
The init script already supports four plugins: dns cache, dns/ip blocking,
ipv6 blocking and dns logging. If enabled this option installs these four
plugins and also adds libldns as a dependency. If enabled the total size
increase is around 125 kB.
Signed-off-by: Terry Stockert <stockert@inkblotadmirer.me>
On interfaces with interface proto "qmi|ncm" and option dhcp
enabled the interface will be changed to $iface_4 | $iface_6. The
interface mapping in mwan3 will not recognize this interface. To fix
this issue an ubus call will check if an upper interface exists.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
User scripts conversion from luci-app-wan3 will be simplified if the variables
are passed by env instead of arguments.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This commit modifies the dnscrypt-proxy plugin's `dnscrypt-proxy.init`
script to allow specifying a custom dnscrypt resolver. Prior to this
commit users of the dnscrypt-proxy plugin are only able to choose from
a dnscrypt resolver that is present in the packaged `ResolversList` CSV
file.
To specify a custom resolver three new configuration parameters are
required[0]: `ProviderName`, `ProviderKey` and `ResolverAddress`.
The `dnscrypt-proxy.init` script now maps `providername`, `providerkey`,
and `resolveraddress` values (if present) from a `dnscrypt-proxy.config`
file into the generated DNSCrypt configuration file.
`PKG_RELEASE` is increased from 1 to 2 to reflect the new functionality.
[0]: 9eee474770/dnscrypt-proxy.conf (L28):L32
Signed-off-by: Daniel McCarney <daniel@binaryparadox.net>
Unbound is configured to restart on hotplug/iface but this can result
in numerous restarts at boot. Unbound also has a restart for NTP.
This was observed to generate trouble and even with procd robustness
too many crashes might occur (rare). Unbound would not be running.
Give more care to /var/lib/unbound/root.key during restarts. Use procd
for iface restarts. Check pidof() to wait one more second for Unbound.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
The checks in the incdefs.sh script do not fully work when cross
compiling. It probably checks the hosts libc. Just provide the settings
manually, as our musl at least supports all these features.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
On dynamic interface proto (dhcp/pppoe) the hotplug will not execude (exit 9)
because the gateway is already released. The check will now only be made
on a ifup ACTION event.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Fortified headers don't seem to like _GNU_SOURCE in this case,
but we can remove that define since it's not needed. Add a patch
for LEDE until a new horst version is released.
Signed-off-by: Bruno Randolf <br1@einfach.org>
simple-adblock: version 1.5 introduces background processing of downloaded list while the next list is being downloaded
Signed-off-by: Stan Grishin <stangri@melmac.net>
remove answer checking for dnsexit as their API allows for too many return codes to handle them all.
Signed-off-by: Xavier Douville <zorxd@users.noreply.github.com>
options 'add_local_fqdn' and 'add_wan_fqdn' can be affected
by race conditions when they are at level 4. Interface name
may not be returned by network tools. The conf file has bad
record formats and Unbound just will not load. Detect this
and fall back to only the host FQDN (level 3).
squash: improve documentation wording and format codes.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Read UNBOUND_TXT_DOMAIN from main unbound configuration.
This prevents records to be added into Unbound in the default 'lan' zone.
Signed-off-by: Audric Schiltknecht <storm+github@chemicalstorm.org>
