The issue existed since the first revision of the rewrite and was
exposed by commit 4024d4f (luci-base: switch to ubus uci operations)
A quick scan of the current repo indicates that these are the only sites
of wrong call pattern
Fixesopenwrt/packages#6113
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Currently this translation refer to an old string, sync to the new one.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
(cherry picked from commit c29ffe4dfc)
Expose options related to routing/NAT flow offloading
feature in firewall3. Offloading is available in kernel 4.14+
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 177224c14a)
Updated Japanese translations.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
(cherry picked from commit d3c1951cbb
adapted for small difference betwenn master and 18.06)
Remove outdated package for luci proto section.
See commit:
441f8a3ed1
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 9e3fb2c585)
A simple scan of the code indicates that currently no code in the repo
is accessing the sysauth= cookie
Closesopenwrt/luci#1555
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Change default leasefile hint from /var/log/upnp.leases to
/var/run/miniupnpd.leases
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
If the physical device is not set in the diag_command then the ping will
always use the route with the lowest metric from the default routing
table.
To fix this add the physical device of the logical interface to the ping
command.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If a logical interface setup and adds in the protocol handler a dynamic
interface then the gateway is configured in the dynamic interface and the
setting up logical interface does not have a gateway specified.
To fix this check first if a dynamic interface is present and use this
gateway ip if found and if no dynamich interface is set then check for a
gateway in the logical interface.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* Remove SimpleForm stuff from Interface Wizard
* adapt Travelmate to support new cbi apply workflow
* fix station re-odering
* tested successfully with old & new workflow
Signed-off-by: Dirk Brenken <dev@brenken.org>
Some of the options in the tabs were not placed in
optimal groups. Add tabs for DHCP and start triggers.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
This fixes an inconsistency because on the interface configuration if
you press Save&Apply it will go back to overview page. It is also the
case with "Firewall - Traffic Rules" details. On firewall zone it only
goes back to firewall zone-detail. Same behaviour on all pages is a good
user experience.
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
The check "supports_reset" only covers /proc/mtd partitions. If we have
this the commands checks for names like ubi or rootfs_data. If this is
found the system is possible for a factory reset. But on x86 the
situation is different. We have no /proc/mtd partitions because this
system do not use a bare metall flash.
To solve this issue check if we have an overlay and if so we could do a
factory reset. This could be applied for system which uses bare metal
flash and system which uses FTL or harddisks.
Jffs2reset is the current command used for factory reset. It will try
to find volume "rootfs_data" and if it's mounted will delete all files
under directory /overlay
luci-mod-admin-mini also has check for reset available, but we leave it
alone for now as it uses "mtd -r erase rootfs_data"
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
