Fixed an issue where the network name is displayed as "%q" on wlan
connection destination network settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
When converting interface names to UCI network names
webadmin fails if there is no UCI network name because
webadmin failed to ensure uciname has a value before
attempting to take a substring.
Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
Do not assume that the "raw" table is present on any system, instead check
/proc/net/ip{,6}_tables_names to determine which iptables tables are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Adds Korean language supported for Luci of OpenWRT. Most of msgs which
shown at UI are translated but still not completed for non-popular
features.
Signed-off-by: Weongyo Jeong <weongyo@gmail.com>
Commit 39ff053890 accidentally removed the conffiles definitions
from luci-base, statistics, splash and diag-devinfo apps.
That has caused existing config files to get overwritten if the
package has been reinstalled via opkg. Additionally, the splash
text files have not been saved in sysupgrade or backup as they
are located outside /etc/config
This commit adds back the conffiles definitions to the respective
packages.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Changes:
Saratov, Russia switches from +03 to +04 on 2016-12-04 at 02:00.
This hives off a new zone Europe/Saratov from Europe/Volgograd.
The new zone Asia/Atyrau for Atyraū Region, Kazakhstan, is like
Asia/Aqtau except it switched from +04/+05 to +05/+06 in spring
1999, not fall 1994.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
When a lease objects expires property is set to "false", its expiry time is
unlimited, so adjust the templates to properly display that state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The expiry time in an odhcpd lease file line may be -1 to denote an infinite
lease time, so adjust the code to properly support that.
The expiry attribute of the lease object will be set to "false" in case of an
infinite lease.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
We're currently just setting system time, but we don't set battery
backed RTC. Time in the RTC is only set on the graceful shutdown, which
is quite hard to achieve on embedded devices.
In other words, on systems with battery backed RTC we currently don't
handle following use case properly:
1. Set system time from web UI (sets only system time, but not RTC)
2. Unplug the device from power
Then after the reboot, we've wrong system time again, because time set
in [1] is not saved to battery backed RTC.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Note that several of the time zones now use a numeric name
that is quoted with < > (e.g. "<+03>-3")
musl 1.1.15 and earlier have a bug with < > quoted time zone names.
Fix for the bug
* has already been patched in musl upstream with
http://git.musl-libc.org/cgit/musl/commit/?id=8ca27ac4bfe73bff785d0c26c1de0da92b55e5c6
* has been committed in LEDE with
671cb35880
* has been submitted to Openwrt as pull request
https://github.com/openwrt/openwrt/pull/163
Key changes in 2016d-2016i:
---------------------------
2016d:
America/Caracas switches from -0430 to -04 on 2016-05-01.
Asia/Magadan switches from +10 to +11 on 2016-04-24.
New zone Asia/Tomsk, split off from Asia/Novosibirsk.
2016f:
Asia/Novosibirsk switches from +06 to +07 on 2016-07-24.
Asia/Novokuznetsk and Asia/Novosibirsk now use numeric time zone
abbreviations instead of invented ones.
2016g:
Turkey switched from EET/EEST (+02/+03) to permanent +03,
effective 2016-09-07. Use "+03" rather than an invented
abbreviation for the new time.
Several zones in Antarctica and the former Soviet Union, along
with zones intended for ships at sea that cannot use POSIX TZ
strings, now use numeric time zone abbreviations instead of
invented or obsolete alphanumeric abbreviations.
2016h:
Asia/Gaza and Asia/Hebron end DST on 2016-10-29, not
2016-10-21. Predict that future fall transitions will
be on the last Saturday of October.
Asia/Colombo now uses numeric time zone abbreviations like "+0530"
instead of alphabetic ones like "IST" and "LKT".
2016i:
Pacific/Tongatapu begins DST on 2016-11-06, ending on
2017-01-15. Assume future observances in Tonga will be
from the first Sunday in November through the third Sunday in
January, like Fiji. Switch to numeric time zone abbreviations
for this zone.
Northern Cyprus is now +03 year round, causing a split in Cyprus
time zones starting 2016-10-30 at 04:00. This creates a zone
Asia/Famagusta.
Antarctica/Casey switched from +08 to +11 on 2016-10-22.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit d4c3372020.
PATH inconsistencies and Host/Install arguments have been fixed in both
LEDE and OpenWrt, so we can revert the revert.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Specify reasonable sizes for metric and MTU fields to
prevent the table from being too wide.
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Now that luci-mod-admin-full figures out the proper diagnostics host
during postinstall we can remove the UCI section from the default
configuration file.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Attempt to infer the default diagnostics host for nslookup / ping / traceroute
from the various URLs in /etc/os-release. Fall back to "openwrt.org" if no
host is found to preserve backwards compatibility.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
OpenWrt doesn't provide an argument to Host/Install like LEDE does; use
HOST_BUILD_PREFIX instead, which is available on both.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Also, don't make any assumptions about the staging dir lua and LuaSrcDiet
were installed to.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Instead of defaulting to replace, even on hardware that supports multi
SSID, make the default to add. This reduces the chance of locking
oneself out when adding a second network. If you intended to replace,
ending up with two networks then deleting one is easier than recovering
when the old network configuration is gone.
Signed-off-by: Karl Palsson <karlp@etactica.com>
After clicking the "join" button on the scan list, the SSID is no longer
visible, though it's kept in the form to pass to the server.
Show the chosen SSID on the top of the page, to help people confirm that
they're joining the right network.
Signed-off-by: Karl Palsson <karlp@etactica.com>
