There is some confusion in the Git log of this file. Specifically,
the commit message on 7b7f1702 incorrectly indicates that there was
"potential fear" about copyright infringement.
Upon review of this situation, there is, in my opinion, no concern of
copyright infringement here. This is not legal advice; it is my
opinion based of years of work on copyright policy for FOSS.
However, Elliott Mitchell's idea was obviously helpful as inspiration
in writing this script and deserves credit. Ideas alone, however,
are not to my knowledge copyrightable anywhere in the world.
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
With the switch to Linux 6.12 this driver was enabled by accident.
However, it doesn't support any of the router SoCs but is meant to be
used only by the smartphone, tablet and chromebook SoCs.
Disable the driver again to silence a kernel error logline during boot.
Fixes: 0a0f5f94ec ("mediatek: mt7623: update config-6.12")
Fixes: 029b7ed9c4 ("mediatek: mt7622: update config-6.12")
Reported-by: https://aparcar.org/openwrt-tests/119/
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add new mtdsplit parser "mstc-boot" for the devices manufactured by MSTC
(Mitra Star Technology Corp.). This is necessary to handle dual-boot on
those devices.
This parser splits kernel+rootfs or only rootfs(or UBI) based on the
image in the firmware partition or pre-defined partitions in dts, and
"bootnum" value in the "persist" (or "working") partition.
Note: "bootnum" is used for switching active firmware partitions on the
devices manufactured by MSTC and '1' or '2' are used on most
devices. But some devices use '0' or '1'. (example: I-O DATA
WN-DEAX1800GR)
Sequence:
1. obtain "bootnum" value
2. child nodes exsist (regardless of bootnum)
-> fixed partitions
(active parts : without bootnum (ex.: "kernel", "rootfs")
inactive parts: with bootnum (ex.: "kernel2", "rootfs2"))
3. current partition is active (dt bootnum == mtd bootnum)
-> image-based partitions
Device Tree:
- common
- mstc,bootnum : "bootnum" value for the mtd partition (0/1/2)
- mstc,persist : phandle of "persist" partition containing "bootnum"
value
- fixed partitions
- #address-cells: indicate cell count of address of child nodes (1)
- #size-cells : indicate cell count of size of child nodes (1)
- (child nodes) : define the child partitions
- reg : define the offset and size
- label-base : define the base name of the partition
- (example) : base:"kernel"->"kernel"(active)/"kernel2"(inactive)
example:
partition@3c0000 {
compatible = "mstc,boot";
reg = <0x3c0000 0x3240000>;
label = "firmware1";
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x800000>;
label-base = "kernel";
};
partition@800000 {
reg = <0x800000 0x2a40000>;
label-base = "ubi";
};
};
- image-based partitions
(no additional properties)
example:
partition@5a0000 {
compatible = "mstc,boot";
label = "firmware1";
reg = <0x5a0000 0x3200000>;
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
};
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18976
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The 6.12 testing kernel for ipq40xx target is ready now.
Tested on SKSpruce WIA3300-20.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
On the ipq40xx platform, the bus range is 1 - 255. Therefore, bus
number 0 is clearly incorrect. Change the bus number to 1, just
like other ipq40xx devices. This patch fixes the following dtc
warnings on 6.12 kernel:
qcom-ipq4019.dtsi:476.5-29: Warning (pci_device_bus_num): /soc/pcie@40000000/pcie@0/wifi@0,0:bus-range: PCI bus number 0 out of range, expected (1 - 255)
qcom-ipq4019.dtsi:476.5-29: Warning (pci_device_bus_num): /soc/pcie@40000000/pcie@0/wifi@0,0:bus-range: PCI bus number 0 out of range, expected (1 - 255)
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- Remove duplicate PCIe bridge. A default bridge node has been
added upstream.
- Do not refer to the qca807x node. This node label has been
removed. We can disable the qca807x phy in mdio node.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a bridge node label so that we can insert PCIe peripheral nodes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Copy arch directory from 6.12 kernel to restore the default
6.6 device tree files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Copy patches and kernel configs from 6.12 kernel to restore the
default 6.6 kernel support files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a preparation for 6.12 kernel support. It can help us
track the device tree files history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a preparation for 6.12 kernel support. It can help us
track the patches and Kconfig history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a preparation for introducing the 6.12 kernel support.
All configs are automatically refreshed. In theory, they will
generate the same .config files in the kernel build directory
as before.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The prototype of `devm_platform_ioremap_resource_byname()` was defined
in `linux/platform_device.h`.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This function is only used by the current source file gcc-ipq4019.c.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The node name should include the reg property value. Fix warning:
qcom-ipq4019-lbr20.dts:415.17-449.4: Warning (i2c_bus_reg): /soc/i2c@78b7000/led-controller: I2C bus unit address format error, expected "27"
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18725
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The DRM modules for simple (ie. raw, non-eDP) panels can be used also
by platforms others than Freescale i.MX.
Create an individual package for it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Not all targets support power management, some older or more simple
targets don't have CONFIG_PM set. Allow kernel module packages to
depend on USES_PM to only be available on targets which got
CONFIG_PM=y in their kernel config.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Partially revert commit 332645a610 ("uboot-mediatek: sync with
mtk-openwrt/u-boot 20250711") by dropping unused PHY drivers which come
with large embedded firmware (and are hence inacceptable for upstream)
and restoring our previous version of the Airoha EN8811H driver which is
known to work and load firmware from the eMMC boot1 hardware partition
instead of embedding it in the driver.
In future we may switch to the upstream Airoha EN8811H driver which
allows loading the firmware either from a filesystem or overloading the
en8811h_read_fw() for board which may eg. store that firmware directly
inside a eMMC hardware partition or UBI volume, like the BPi-R3 mini
does.
See also:
https://patchwork.ozlabs.org/project/uboot/patch/20250615131243.30770-1-lucienzx159@gmail.com/
Fixes: 332645a610 ("uboot-mediatek: sync with mtk-openwrt/u-boot 20250711")
Reported-by: Adrian Bente
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The files-6.6 and files-6.12 folder contain the same content, merge them
into the files folder for both kernel versions.
Link: https://github.com/openwrt/openwrt/pull/19423
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ix4-200d is a 4 bay NAS supported since OpenWrt 23.05. Drive trays
controller. Due to a kernel-related issue with the SATA controller,
trays #1 and #2 were not recognized. This issue has been fixed in
kernel 6.10, so with the adoption of kernel 6.12 in the Kirkwood
target trays #1 and #2 can now be made accessible. This requires the
kmod-ata-ahci package, which this commit adds as default to the
makefile.
Signed-off-by: Sander van Deijck <sander@vandeijck.com>
Link: https://github.com/openwrt/openwrt/pull/19435
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This ensures mbedtls_config.h is correctly updated and the package rebuilt
accordingly when configuration options are changed after the source is first
prepared.
Signed-off-by: Karsten Sperling <ksperling@apple.com>
Link: https://github.com/openwrt/openwrt/pull/19358
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Not all targets have CONFIG_PINCTRL=y set in their kernel config.
Let's introduce a feature for that so kernel module packages which
select or depend on CONFIG_PINCTRL=y may depend on that, so we can
try to prevent leaking CONFIG_PINCTRL=y also into targets which do
not require it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
