mediatek: add support for ELECOM WRC-X3000GS3
ELECOM WRC-X3000GS3 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
MT7981B.
Specification:
- SoC : MediaTek MT7981B
- RAM : DDR3 512 MiB (Winbond W634GU6QB-09)
- Flash : SPI-NOR 128 MiB (Winbond W25N01GVZEIG)
- WLAN : 2.4/5 GHz 2T2R (MediaTek MT7981B (SoC))
- Ethernet : 5x 10/100/1000 Mbps
- wan (phy) : MediaTek MT7981B (SoC)
- lan (switch) : MediaTek MT7531A
- LEDs/Keys (GPIO): 8x/4x
- UART : through-hole on PCB (J500)
- assignment : 3.3V, TX, RX, NC, GND from tri-angle marking
- settings : 115200n8
- Power : 12 VDC, 1 A (Max. 12.8 W)
Flash instruction using factory.bin image:
1. Boot WRC-X3000GS3 in router mode normally
2. Access to the WebUI ("http://192.168.2.1/") on the device and open
the firmware update page ("ファームウェア更新")
3. Select the OpenWrt factory.bin image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing
Switching to the stock firmware:
1. Load the elecom.sh script
. /lib/upgrade/elecom.sh
2. Check the current index of firmware partition
mstc_rw_bootnum
3. Set the bootnum to opposite value between 1 and 2
mstc_rw_bootnum <value>
example:
- step2 returned "1": mstc_rw_bootnum 2
- step2 returned "2": mstc_rw_bootnum 1
4. Reboot
Notes:
- ELECOM sells (or sold) multiple models as AX3000 class with different
hardwares:
- WRC-X3000GS(N) : Lantiq(Intel) GRX350/GRX550
- WRC-X3000GS(T)2: Qualcomm IPQ5018
- WRC-X3000GS3 : MediaTek MT7981B
MAC Addresses:
LAN : 38:97:A4:xx:xx:40 (Factory, 0x2A(hex)/Ubootenv,"ethaddr"(text))
WAN : 38:97:A4:xx:xx:43 (Factory, 0x24(hex))
2.4GHz: 38:97:A4:xx:xx:41 (Factory, 0x4 (hex))
5GHz : 38:97:A4:xx:xx:42 (Factory, 0xA (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18976
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
INAGAKI Hiroshi
Hauke Mehrtens
parent
76143aec09
commit
ccaa4933b1
5 changed files with 462 additions and 0 deletions
382
target/linux/mediatek/dts/mt7981b-elecom-wrc-x3000gs3.dts
Normal file
382
target/linux/mediatek/dts/mt7981b-elecom-wrc-x3000gs3.dts
Normal file
|
|
@ -0,0 +1,382 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ELECOM WRC-X3000GS3";
|
||||
compatible = "elecom,wrc-x3000gs3", "mediatek,mt7981b";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac1;
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-wps {
|
||||
label = "wps";
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
switch-ap {
|
||||
label = "ap";
|
||||
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
};
|
||||
|
||||
switch-router {
|
||||
label = "router";
|
||||
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: led-1 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: led-2 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led-5 {
|
||||
function = LED_FUNCTION_WPS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-6 {
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
led-7 {
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-connection-type = "2500base-x";
|
||||
|
||||
nvmem-cells = <&macaddr_factory_2a>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
label = "wan";
|
||||
phy-connection-type = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_24>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-connection-type = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
spi_nand: spi_nand@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
mediatek,bmt-remap-range =
|
||||
<0x0000000 0x5a0000>, /* BL2 - Fwheader (5.625 MiB) */
|
||||
<0x37a0000 0x3a0000>, /* Config - Fwheader2 (3.625 MiB) */
|
||||
<0x6d40000 0x840000>; /* Config2 - Backup (8.25 MiB) */
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
macaddr_factory_4: mac-address@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_a: mac-address@a {
|
||||
reg = <0xa 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_24: mac-address@24 {
|
||||
reg = <0x24 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_2a: mac-address@2a {
|
||||
reg = <0x2a 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "Fwheader";
|
||||
reg = <0x580000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* stock: "ubi" */
|
||||
partition@5a0000 {
|
||||
compatible = "mstc,boot";
|
||||
label = "firmware1";
|
||||
reg = <0x5a0000 0x3200000>;
|
||||
mstc,bootnum = <1>;
|
||||
mstc,persist = <&mtd_persist>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label-base = "ubi";
|
||||
reg = <0x0 0x3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@37a0000 {
|
||||
label = "Config";
|
||||
reg = <0x37a0000 0x380000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3b20000 {
|
||||
label = "Fwheader_2";
|
||||
reg = <0x3b20000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* stock: "ubi_2" */
|
||||
partition@3b40000 {
|
||||
compatible = "mstc,boot";
|
||||
label = "firmware2";
|
||||
reg = <0x3b40000 0x3200000>;
|
||||
mstc,bootnum = <2>;
|
||||
mstc,persist = <&mtd_persist>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label-base = "ubi";
|
||||
reg = <0x0 0x3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@6d40000 {
|
||||
label = "Config_2";
|
||||
reg = <0x6d40000 0x380000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
mtd_persist: partition@70c0000 {
|
||||
label = "persist";
|
||||
reg = <0x70c0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@71c0000 {
|
||||
label = "Mrd";
|
||||
reg = <0x71c0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7200000 {
|
||||
label = "Backup";
|
||||
reg = <0x7200000 0x380000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
status = "okay";
|
||||
|
||||
band@0 {
|
||||
reg = <0>;
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
band@1 {
|
||||
reg = <1>;
|
||||
nvmem-cells = <&macaddr_factory_a>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
|
@ -64,6 +64,9 @@ cudy,wr3000h-v1)
|
|||
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan" "link tx rx"
|
||||
ucidef_set_led_netdev "internet" "internet" "white:wan-online" "wan" "link"
|
||||
;;
|
||||
elecom,wrc-x3000gs3)
|
||||
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
|
||||
;;
|
||||
glinet,gl-x3000|\
|
||||
glinet,gl-xe3000)
|
||||
ucidef_set_led_default "power" "POWER" "green:power" "1"
|
||||
|
|
|
|||
33
target/linux/mediatek/filogic/base-files/lib/upgrade/elecom.sh
Executable file
33
target/linux/mediatek/filogic/base-files/lib/upgrade/elecom.sh
Executable file
|
|
@ -0,0 +1,33 @@
|
|||
. /lib/functions.sh
|
||||
|
||||
# Read or update the "bootnum" in the "persist" partition
|
||||
#
|
||||
# parameters:
|
||||
# $1: index of active partition to set (1/2)
|
||||
#
|
||||
# operations:
|
||||
# read : mstc_rw_bootnum
|
||||
# write: mstc_rw_bootnum <index>
|
||||
mstc_rw_bootnum() {
|
||||
local mtd
|
||||
local curval setval="$1"
|
||||
|
||||
case "$setval" in
|
||||
1|2|"") ;;
|
||||
*) echo "invalid bootnum specified \"$setval\""; return 1 ;;
|
||||
esac
|
||||
|
||||
mtd=$(find_mtd_part "persist")
|
||||
if [ -z "$mtd" ]; then
|
||||
echo "cannot find "persist" mtd partition"
|
||||
return 1
|
||||
fi
|
||||
|
||||
curval=$(hexdump -s 4 -n 1 -e '"%d"' $mtd)
|
||||
[ -z "$setval" ] &&
|
||||
echo "$curval" && return 0
|
||||
|
||||
[ "$curval" != "$setval" ] &&
|
||||
printf "\x$setval" | \
|
||||
dd of=$mtd bs=1 seek=4 conv=notrunc
|
||||
}
|
||||
|
|
@ -146,6 +146,21 @@ platform_do_upgrade() {
|
|||
fw_setenv sw_tryactive 0
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
elecom,wrc-x3000gs3)
|
||||
local bootnum="$(mstc_rw_bootnum)"
|
||||
case "$bootnum" in
|
||||
1|2)
|
||||
CI_UBIPART="ubi$bootnum"
|
||||
[ -z "$(find_mtd_index $CI_UBIPART)" ] &&
|
||||
CI_UBIPART="ubi"
|
||||
;;
|
||||
*)
|
||||
v "invalid bootnum found ($bootnum), rebooting..."
|
||||
nand_do_upgrade_failed
|
||||
;;
|
||||
esac
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
mercusys,mr80x-v3|\
|
||||
mercusys,mr90x-v1|\
|
||||
tplink,archer-ax80-v1|\
|
||||
|
|
|
|||
|
|
@ -82,6 +82,22 @@ define Build/append-openwrt-one-eeprom
|
|||
dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@
|
||||
endef
|
||||
|
||||
define Build/mstc-header
|
||||
$(eval version=$(word 1,$(1)))
|
||||
$(eval magic=$(word 2,$(1)))
|
||||
gzip -c $@ | tail -c8 > $@.crclen
|
||||
( \
|
||||
printf "$(magic)"; \
|
||||
tail -c+5 $@.crclen; head -c4 $@.crclen; \
|
||||
dd if=/dev/zero bs=4 count=2; \
|
||||
printf "$(version)" | dd bs=56 count=1 conv=sync 2>/dev/null; \
|
||||
dd if=/dev/zero bs=$$((0x20000 - 0x84)) count=1 conv=sync 2>/dev/null | \
|
||||
tr "\0" "\377"; \
|
||||
cat $@; \
|
||||
) > $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/zyxel-nwa-fit-filogic
|
||||
$(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
|
||||
$@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
|
||||
|
|
@ -952,6 +968,19 @@ define Device/edgecore_eap111
|
|||
endef
|
||||
TARGET_DEVICES += edgecore_eap111
|
||||
|
||||
define Device/elecom_wrc-x3000gs3
|
||||
DEVICE_VENDOR := ELECOM
|
||||
DEVICE_MODEL := WRC-X3000GS3
|
||||
DEVICE_DTS := mt7981b-elecom-wrc-x3000gs3
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.bin := sysupgrade-tar | mstc-header 5.04(XZQ.0)b90 COMD | \
|
||||
elecom-product-header WRC-X3000GS3
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += elecom_wrc-x3000gs3
|
||||
|
||||
define Device/gatonetworks_gdsp
|
||||
DEVICE_VENDOR := GatoNetworks
|
||||
DEVICE_MODEL := gdsp
|
||||
|
|
|
|||
Loading…
Reference in a new issue