Building against recent kernel versions (noticed with 6.12) and -Werror
can fail because a macro MAX(a,b) is already defined in minmax.h or
kernel.h before 5.10.
In file included from ../mwlwifi-2025.02.06~db97edf2/hif/fwcmd.h:23,
from ../mwlwifi-2025.02.06~db97edf2/core.c:25:
../mwlwifi-2025.02.06~db97edf2/hif/hostcmd.h:1124:9: error: "MAX" redefined [-Werror]
1124 | #define MAX(a, b) (((a) > (b)) ? (a) : (b))
| ^~~
In file included from usr/include/mac80211-backport/linux/minmax.h:4,
from ./include/linux/kernel.h:28,
from usr/include/mac80211-backport/linux/kernel.h:3,
from ./include/linux/skbuff.h:13,
from usr/include/mac80211-backport/linux/skbuff.h:3,
from ./include/linux/if_ether.h:19,
from usr/include/mac80211-backport/linux/if_ether.h:3,
from ./include/linux/etherdevice.h:20,
from usr/include/mac80211-backport/linux/etherdevice.h:3,
from ../mwlwifi-2025.02.06~db97edf2/core.c:18:
./include/linux/minmax.h:330:9: note: this is the location of the previous definition
330 | #define MAX(a,b) __cmp(max,a,b)
| ^~~
Add a pending upstream patch which replaces the MAX(a,b) macro to avoid
conflicts and allow compilation with 6.12
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/18980
Signed-off-by: Robert Marko <robimarko@gmail.com>
Request Softwire46 (S46) [RFC 7598] options when the map and/or ds-lite
packages are installed. This is required as the behaviour of odhcp6c has
changed to not include these OROs by default.
See openwrt/odhcp6c#89
Signed-off-by: Richard Patterson <richard@helix.net.nz>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
446db12b1fd3 MP: fix uniphy reset in phy to phy link scenario
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
3423fdacac63 ssdk_clk: Remove MP_PHY clocks resets and init logic
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
Every time "sysupgrade -b -" runs it would generate a new
(synthetic) "/etc/uci-defaults/10_disable_services" file with
the current time as the modified time. This unfortunately
creates a non-deterministic tarball, so if you run a cron job
to save your state, you don't have a trivial way of seeing if
it changed or not without unpacking the archive, deleting this
file, and comparing the entire directory tree to the previous
backup.
Fixes: #16145
Fixes: 0ad062a21b ("base-files: sysupgrade: include uci-defaults script disabling services #2")
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
When running ACS on multi-radio devices, ACS on one band can block another.
Increase the number of retries and prevent bouncing interfaces between AP
and STA mode during attempts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Generate network configuration replacing netmask with CIDR.
Depends on:
https://github.com/openwrt/openwrt/pull/13765
Using CIDR provides the following advantages:
* Consolidate notation for IPv4 and IPv6 addresses.
* Consolidate notation for IP addresses and routing targets.
* Simplify network configuration and troubleshooting.
* Follow the transition from net-tools to iproute2.
Resulting configuration example:
```
config interface 'loopback'
option device 'lo'
option proto 'static'
list ipaddr '127.0.0.1/8'
config interface 'lan'
option device 'br-lan'
option proto 'static'
list ipaddr '192.168.1.1/24'
```
Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/13780
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some modems and SIM cards take a bit longer to initialize after UIM has been
powered off. Waiting too little time can cause the qmi protocol to end up
in a loop repeatedly power-cycling the SIM card.
Avoid that by
a) increasing the time we unconditionally sleep after --uim-power-on
b) increasing the time we allow uqmi to wait for response for --uim-get-sim-state
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18772
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The call to 'ipcalc' is used in 'dnsmasq' init script to create the
configuration. If the 'ipaddr' is in the configured range then 'ipcalc' exited
with an error whereby the START/STOP variables are unavailable.
This behaviour has changed during 'ipcalc' refactoring and now leads to a
problem when starting 'dnsmasq' if the 'ipaddr' is inside this range. To
restore the old behaviour, only a warning is issued as before and the
required variables for the 'dnsmasq' are still set.
Fixes: 854739b32c (base-files: ipcalc.sh: Rewrite in pure shell)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/18641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the uci 'dhcp' configuration for the dhcp leases is incorrect then
the call to 'ipclac' fails. However, the problem is that the dnsmasq
configuration option 'dhcp-range' is still written for this uci section
even though the information generated by ipcalc is incorrect or not set.
Due to the incorrectly generated configuration for dnsmasq, the service
cannot start.
To prevent an incorrect configuration from being written to the configuration,
a check is now made beforehand to ensure that the required variables are
present and valid. If the configuration is incorrect, a message is emitted
to the log that this configuration section is incorrect and this uci
configuration section is omitted.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/18641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ucode-based wifi interface validation is based on `hostapd.conf`
specific options, which means it's missing the OpenWrt-specific
'network' property.
This causes schema validation warnings like:
```
daemon.notice netifd: radio1 (1340): wifi-scripts: network is not present in the schema
```
The description is taken from the OpenWrt wiki:
https://openwrt.org/docs/guide-user/network/wifi/basic#common_options1
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18946
Signed-off-by: Robert Marko <robimarko@gmail.com>
Support new libpcap dependency and drop an old kernel version dependency.
Also improve formatting and avoid using unneeded deferred make variables.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The initial 6.12 merge leaves package/zram menuconfig behaviour confusing.
Selecting "kmod-zram" opens a submenu of the available algorithms to build
and the actual algo to use. However, when "lzo-rle" is shown as the default
used, it still remains missing from the available list. Only enabling a
_different_ compression algo to build will also reveal "lzo-rle" as
available.
Update the Kconfig to show "lzo-rle" as available if used/referenced.
Fixes: 4708057e27 ("package/zram: update for kernel 6.12")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
263a0cb87b50 udebug: use proper libudebug API
ca9b8765aea3 dns: rework packet API
ea40cfdf7eb0 cache: send multiple queries in a single packet
d62813727e53 cache: add explicit lookup for host addresses
0ce73d80dc0c dns: add cache/queue for outgoing queries
083be33749b1 cache: improve service refresh behavior
55d0c1bc1ac5 interface: ask for unicast responses by default
ce508467a533 service: add support for setting service specific hostname
632953a1582d interface: when interface properties change, reinitialise
695ac3708aa0 ubus: fix ubus announcements txt fields
cecbe1c0caae Make mdns responder case-insensitive.
2b28094d31ca dns: add support for reverse address mapping queries
Signed-off-by: Felix Fietkau <nbd@nbd.name>
By OpenWrt's design, hostapd runs in a single global instance for all radios supported by the device, rather than one instance per radio like hostapd usually does.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
Manually refreshed:
301-mesh-noscan.patch
601-ucode_support.patch
770-radius_server.patch
Automatically rebased all other patches.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
The driver tries to access ioports (0x2f9!!) which UML doesn't have.
This causes lots of warnings to appear on boot:
| WARNING: CPU: 0 PID: 1 at lib/logic_iomem.c:188 serial8250_config_port+0x20a/0x1260
| Invalid writeqb of 0xff at address 2f9
| Modules linked in:
| CPU: 0 UID: 0 PID: 1 Comm: swapper Tainted: G W 6.12.25 #0
| Tainted: [W]=WARN
| Stack:
| Call Trace:
| [<60001000>] ? set_reset_devices+0x0/0x16
| [<60452cba>] ? serial8250_config_port+0x20a/0x1260
| [<6071e91f>] ? dump_stack_lvl+0x55/0x71
| [<606e127c>] ? _printk+0x0/0x4f
| [<60044bbb>] ? __warn+0x11b/0x120
| [<6003b5d0>] ? um_set_signals+0x0/0x40
| [<606de721>] ? warn_slowpath_fmt+0x81/0x8c
| [<606de6a0>] ? warn_slowpath_fmt+0x0/0x8c
| [<60452cba>] ? serial8250_config_port+0x20a/0x1260
(they are even recursive!)
Now, the situation gets more confusing. Because from what I can tell,
this was seemingly done intenionally. Upstream patches in related areas:
|commit ddd268c42871b78c75e12a5c28207fb481138f41
|Author: Niklas Schnelle <schnelle@linux.ibm.com>
|Date: Wed Apr 3 14:43:00 2024 +0200
|
| um: Select HAS_IOREMAP for UML_IOMEM_EMULATION
|
| In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
| compile time. UML supports these via its UML_IOMEM_EMULATION so let that
| select HAS_IOPORT and also reflect this in NO_IOPORT_MAP.
hint that there's ongoing work in this area. But unfortunately, this future
hasn't arrived yet. Once this future arrives, please nuke this patch.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Add an additional bootmenu option and commands to overwrite the GPT
table with the custom one for upstream U-Boot.
This is needed as the pre-installed GPT table differ and updating the
GPT table is a requirement to install the upstream U-Boot (or the old
U-Boot will be loaded)
To make the migration to new U-Boot bootloader an user can now load the
system with mtk_uartboot and select "Load GPT Table ..." in conjunction
with other update command.
Link: https://github.com/openwrt/openwrt/pull/18874
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ALFA Network AP120C-AX is a dual-band ceiling AP, based on Qualcomm
IPQ6000 + QCN5021 + QCN5052 + QCA8072 chipsets bundle.
Specifications:
- SOC: Qualcomm IPQ6000 (quad-core Cortex-A53 1.2 GHz)
- DRAM: DDR3 512 MB (Micron MT41K256M16TW-107)
- Flash: 16 MB SPI NOR (Macronix MX25U12832F, boot device)
128 MB NAND (Macronix MX30UF1G18AC, dual-firmware)
- Ethernet: 2x 10/100/1000 Mbps Ethernet (QCA8072)
802.3at/af PoE input in WAN port
- Wi-Fi: 2x2 2.4 GHz Wi-Fi 6 (QCN5021 + RFFM8227 FEM)
2x2 5 GHz Wi-Fi 6 (QCN5152 + QPF4568 FEM)
- Antenna: for indoor version: dual-band, internal
2x (or 4x) U.FL antenna connectors on the PCB
- LED: for indoor/outdoor versions: 5x on external module (status,
2x Wi-Fi, 2x Ethernet), PoE LED on-board
8-pin on-board header for LED module (1.27 mm pitch, J14)
- Button: 1x button (reset)
- USB: 1x 4-pin on-board header for USB 2.0 (2.54 mm pitch, J22)
- UART: 1x micro USB Type-B for system console (Holtek HT42B534)
1x 4-pin on-board header (2.54 mm pitch, J11)
- Power: 802.3at/af PoE or 12 V DC/2 A (DC jack)
- Other: 8-pin and 4-pin on-board headers for external Bluetooth
module (1.27 mm pitch, J15, J16, unavailable, thus untested)
MAC addresses:
- WAN: 00:c0:ca:xx:xx:6c (art 0x0, device's label -2)
- LAN: 00:c0:ca:xx:xx:6d (art 0x6, device's label -1)
- 2.4 GHz (IPQ6000): 00:c0:ca:xx:xx:6e (art 0xc, device's label)
- 5 GHz (IPQ6000): 00:c0:ca:xx:xx:6f (device's label + 1)
Flash instructions:
Due to the lack of direct GUI based update capability and dual-firmware
partition configuration, it is recommended to use TFTP + serial console
based approach (console is available in micro USB connector):
1. Set a static IP 192.168.1.1/24 on PC and start TFTP server with the
'...-factory.ubi' image renamed to 'firmware.bin'.
2. Make sure you can access board's serial console over micro USB.
3. Power up the device, hit any key to enter U-Boot CLI and issue below
commands.
3.1 Restore U-Boot's environment to default values (double check first
the '0:APPSBLENV' partition offset using 'smem' command):
sf probe
sf erase 0x510000 0x10000
saveenv
3.2 Download and install OpenWrt in both partitions and reset the board:
tftpb 0x44000000 firmware.bin
flash rootfs
flash rootfs_1
reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Replace bootmenu shortmenu mediatek patch with a better version proposed
upstream that implement a more clean implementation.
Also the mediatek patch seems to be bugged and with lots of bootmenu
elements it's gets very bugged and unusable.
Refresh any affected patch.
Upstream-Status: Submitted [https://lore.kernel.org/u-boot/20250525134407.3760-1-ansuelsmth@gmail.com/]
Link: https://github.com/openwrt/openwrt/pull/18919
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This allows us to use the full size of nand, which increases ubi size
from 64M to 122.25M.
If you are at factory firmware, please refer commit 63b8d98dd0 ("mediatek: add support for Cudy TR3000 v1")
to boot into OpenWrt initramfs (stock layout).
Flash instructions:
1. Login into the device and backup everything, especially 'Factory' part.
1. Unlock mtd partitions:
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
3. Write new BL2 and FIP
mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-preloader.bin BL2
mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Tested-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Some MBIM devices can exist on an MHI bus (over PCIe) instead of being presented as USB devices.
In such cases the interface name lookup needs to be done from /sys/class/wwan/ instead of /sys/class/usbmisc/
Add another readlink call in case the first lookup fails.
This allows the MBIM protocol to find the interface name and then work with both type of devices provided that /etc/config/network has the right device for MBIM interface (such as /dev/wwan0mbim0 in case of MHI)
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
The device manufacturer name for Qualcomm Atheros is listed
as "Qualcomm, Atheros" for PCI devices but "Qualcomm Atheros" under
"compatible". This gives inconsistent results in `iwinfo` and
```
Hardware: 0x168c:0x0046 0x168c:0xcafe [Qualcomm, Atheros QCA9984]
Hardware: embedded [Qualcomm Atheros IPQ8074]
```
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
The 'unknown' string was misspelled as 'unknonw'.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add 'dBm' units to 'Signal' and 'Noise' to match what non-ucode iwinfo shows.
Before:
Signal: -49 Noise: -103
After:
Signal: -49 dBm Noise: -103 dBm
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
When bitrate is unknown, the units shouldn't be displayed. This is
consistent with other "unknown" fields and non-ucode iwinfo.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
There is no practical value in keeping GCC11 around, as even OpenWrt 23.05
uses GCC12 as the default one, so drop it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, MaxLinear/Exar USB serial devices are supported via out-of-tree
usb-serial-xr_usb_serial_common driver which is broken on 6.12.
So since upstream has support for these devices since 6.5 lets package
the in-tree driver to be able to drop the out-of-tree one.
Link: https://github.com/openwrt/openwrt/pull/18926
Signed-off-by: Robert Marko <robimarko@gmail.com>
SOC: MediaTek MT7981b
RAM: 256MB DDR3
FLASH: 128MB SPI-NAND (Winbond W25N01GV)
WIFI: Mediatek MT7981b DBDC 802.11ax 2.4/5 GHz
ETH: MediaTek MT7531 Switch
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
Interface MAC Algorithm
LAN 8C:AE:DB:2C:xx:xx label
WAN 8C:AE:DB:2C:xx:xx label +1
WLAN 2.4G 8C:AE:DB:2C:xx:xx label +2
WLAN 5G 8C:AE:DB:2C:xx:xx label +3
Installation
-------------------Install openwrt image-------------------------------:
Set a static ip on the ethernet interface of your PC. (ip address:
192.168.1.254, subnet mask:255.255.255.0) .
Download the OpenWrt uboot image
(openwrt-mediatek-filogic-snr_cpe-ax2-bl31-uboot.fip).
SSH/SCP opened by default on the stock firmware (3.0.1).
Username: Admin, default password: Admin. Check it on the bottom of
the router.
Copy uboot image using SCP (WinSCP) to /tmp dir on SNR-CPE-AX2.
Download recovery file.
openwrt-mediatek-filogic-snr_snr-cpe-ax2-initramfs-recovery.itb.
Copy the recovery image to a TFTP server reachable at 192.168.1.254/24.
Open ssh shell to the SNR-CPE-AX2.
Run commands:
mtd write \
/tmp/openwrt-mediatek-filogic-snr_snr-cpe-ax2-bl31-uboot.fip FIP
reboot
Wait until recovery boot.
Open web 192.168.1.1 and do sysupgrade by
openwrt-mediatek-filogic-snr_cpe-ax2-squashfs-sysupgrade.itb
Signed-off-by: Nikolay March <palladin82@yandex.ru>
Link: https://github.com/openwrt/openwrt/pull/18700
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream seems to be using led-sources instead of custom properties.
Code mostly taken from mt76.
Changed all(few) users of qca,led_pin to use the new format.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18805
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently adb uses libopenssl for certain authentication tasks between
the host and the target device such as certificate generation, hashing,
base64 encoding and pki signatures.
Add a patch to use functionalities available in mbedtls instead.
Also switch package makefile and dependency to libmbedtls and drop
patches and references to lib{crypto,openssl} as they are no longer
required.
This conserves considerable amount of space on the device as openwrt
ships with libmbedtls by default.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18819
Signed-off-by: Robert Marko <robimarko@gmail.com>
Debian Changelogs from 20250512:
* New upstream microcode datafile 20250512
- Mitigations for INTEL-SA-01153 (ITS: Indirect Target Selection):
CVE-2024-28956: Processor may incompletely mitigate Branch Target
Injection due to indirect branch predictions that are not fully
constrained by eIBRS nor by the IBPB barrier. Part of the "Training
Solo" set of vulnerabilities.
- Mitigations for INTEL-SA-01244:
CVE-2025-20103: Insufficient resource pool in the core management
mechanism for some Intel Processors may allow an authenticated user
to potentially enable denial of service via local access.
CVE-2025-20054: Uncaught exception in the core management mechanism
for some Intel Processors may allow an authenticated user to
potentially enable denial of service via local access.
- Mitigations for INTEL-SA-01247:
CVE-2024-43420, CVE-2025-20623: Exposure of sensitive information
caused by shared microarchitectural predictor state that influences
transient execution for some Intel Atom and some Intel Core
processors (10th Generation) may allow an authenticated user to
potentially enable information disclosure via local access.
CVE-2024-45332 (Branch Privilege Injection): Exposure of sensitive
information caused by shared microarchitectural predictor state that
influences transient execution in the indirect branch predictors for
some Intel Processors may allow an authenticated user to potentially
enable information disclosure via local access.
- Mitigations for INTEL-SA-01322:
CVE-2025-24495 (Training Solo): Incorrect initialization of resource
in the branch prediction unit for some Intel Core Ultra Processors
may allow an authenticated user to potentially enable information
disclosure via local access (IBPB bypass)
CVE-2025-20012 (Training Solo): Incorrect behavior order for some
Intel Core Ultra Processors may allow an unauthenticated user to
potentially enable information disclosure via physical access.
- Improved fix for the Vmin Shift Instability for the Intel Core 13th
and 14th gen processors under low-activity scenarios (sig 0xb0671).
This microcode update is supposed to be delivered as a system
firmware update, but according to Intel it should be effective when
loaded by the operating system if the system firmware has revision
0x12e.
- Fixes for unspecified functional issues on several processor models
* New microcodes or new extended signatures:
sig 0x000a06d1, pf_mask 0x95, 2025-02-07, rev 0x10003a2, size 1664000
sig 0x000a06d1, pf_mask 0x20, 2025-02-07, rev 0xa0000d1, size 1635328
sig 0x000b0650, pf_mask 0x80, 2025-03-18, rev 0x000a, size 136192
sig 0x000b06d1, pf_mask 0x80, 2025-03-18, rev 0x011f, size 79872
sig 0x000c0662, pf_mask 0x82, 2025-03-20, rev 0x0118, size 90112
sig 0x000c06a2, pf_mask 0x82, 2025-03-20, rev 0x0118
sig 0x000c0652, pf_mask 0x82, 2025-03-20, rev 0x0118
sig 0x000c0664, pf_mask 0x82, 2025-03-20, rev 0x0118
* Updated microcodes:
sig 0x00050657, pf_mask 0xbf, 2024-12-12, rev 0x5003901, size 39936
sig 0x0005065b, pf_mask 0xbf, 2024-12-12, rev 0x7002b01, size 30720
sig 0x000606a6, pf_mask 0x87, 2025-01-07, rev 0xd000404, size 309248
sig 0x000606c1, pf_mask 0x10, 2025-01-07, rev 0x10002d0, size 300032
sig 0x000706a8, pf_mask 0x01, 2024-12-05, rev 0x0026, size 76800
sig 0x000706e5, pf_mask 0x80, 2025-01-07, rev 0x00ca, size 115712
sig 0x000806c1, pf_mask 0x80, 2024-12-01, rev 0x00bc, size 112640
sig 0x000806c2, pf_mask 0xc2, 2024-12-01, rev 0x003c, size 99328
sig 0x000806d1, pf_mask 0xc2, 2024-12-11, rev 0x0056, size 105472
sig 0x000806ec, pf_mask 0x94, 2024-11-17, rev 0x0100, size 106496
sig 0x000806f8, pf_mask 0x87, 2025-01-28, rev 0x2b000639, size 591872
sig 0x000806f7, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f6, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f5, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f4, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f8, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7, size 624640
sig 0x000806f6, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7
sig 0x000806f5, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7
sig 0x000806f4, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7
sig 0x00090672, pf_mask 0x07, 2024-12-12, rev 0x003a, size 226304
sig 0x00090675, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f2, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f5, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f6, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f7, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000906a3, pf_mask 0x80, 2024-12-12, rev 0x0437, size 224256
sig 0x000906a4, pf_mask 0x80, 2024-12-12, rev 0x0437
sig 0x000906a4, pf_mask 0x40, 2024-12-06, rev 0x000a, size 119808
sig 0x000906ed, pf_mask 0x22, 2024-11-14, rev 0x0104, size 106496
sig 0x000a0652, pf_mask 0x20, 2024-11-14, rev 0x0100, size 97280
sig 0x000a0653, pf_mask 0x22, 2024-11-14, rev 0x0100, size 98304
sig 0x000a0655, pf_mask 0x22, 2024-11-14, rev 0x0100, size 97280
sig 0x000a0660, pf_mask 0x80, 2024-11-14, rev 0x0102, size 98304
sig 0x000a0661, pf_mask 0x80, 2024-11-14, rev 0x0100, size 97280
sig 0x000a0671, pf_mask 0x02, 2024-12-01, rev 0x0064, size 108544
sig 0x000a06a4, pf_mask 0xe6, 2025-02-13, rev 0x0024, size 140288
sig 0x000a06f3, pf_mask 0x01, 2025-02-10, rev 0x3000341, size 1542144
sig 0x000b0671, pf_mask 0x32, 2025-03-17, rev 0x012f, size 219136
sig 0x000b0674, pf_mask 0x32, 2025-03-17, rev 0x012f
sig 0x000b06a2, pf_mask 0xe0, 2025-01-15, rev 0x4128, size 224256
sig 0x000b06a3, pf_mask 0xe0, 2025-01-15, rev 0x4128
sig 0x000b06a8, pf_mask 0xe0, 2025-01-15, rev 0x4128
sig 0x000b06e0, pf_mask 0x19, 2024-12-06, rev 0x001d, size 139264
sig 0x000c06f2, pf_mask 0x87, 2025-03-14, rev 0x210002a9, size 563200
sig 0x000c06f1, pf_mask 0x87, 2025-03-14, rev 0x210002a9
* Removed microcodes (ES/QS steppings):
sig 0x00050656, pf_mask 0xbf, 2023-07-28, rev 0x4003605, size 38912
sig 0x000c06f1, pf_mask 0x87, 2025-03-14, rev 0x210002a9 [EXCLUDED]
Build system: x86/64
Build-tested: x86/64
Run-tested: x86/64
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/18869
Signed-off-by: Robert Marko <robimarko@gmail.com>
A lot of warnings were treated as errors after the default compiler
switched to GCC14. It's hard to fix them one by one, and this u-boot
is not maintained by upstream, so let's just silence these warnings.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18833
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This U-Boot version is used to generate a 'reference'
U-Boot binary for QEMU's 'virt' machine on both
armv7 and armv8.
It has not been updated since EFI support was merged
into the then-armvirt target, so we should bring it up
to the latest version.
The 'mkeficapsule' tool is disabled due to a host-side
dependency on GnuTLS.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Link: https://github.com/openwrt/openwrt/pull/18862
Signed-off-by: Robert Marko <robimarko@gmail.com>
After removing kernel 6.6 support for x86 targets,
kernel 6.12 conditions no longer need to be checked.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18848
Signed-off-by: Robert Marko <robimarko@gmail.com>
Define define fb-io-fops module - Fbdev helpers for framebuffers in I/O memory
By creating a hidden module it is possible to load fb_io_fops.ko
according to the kernel version.
Fixes: 5048c9d ("kernel: modules: adjust the object files of kmod-fb ")
Package kmod-drm-radeon is missing dependencies for the following libraries:
fb_io_fops.ko
make[2]: *** [modules/video.mk:620: /__w/openwrt/openwrt/openwrt/bin/targets/x86/geode/packages/kmod-drm-radeon-6.12.28-r1.apk] Error 1
time: package/kernel/linux/compile#45.35#40.01#75.34
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18771
Signed-off-by: Robert Marko <robimarko@gmail.com>
rtw_ndev_notifier_call should ignore network devices created by other drivers, and it does so,
but when CONFIG_WIRELESS_EXT=n, it does not behave as expected.
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18801
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update to current SSDK head for 6.12 compatibility.
We must disable warnings for missing declarations and prototypes since
whole SSDK is litered with them and actually fixing them is like doing
whack a mole.
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
Version 6.14 - April 7, 2025
* Feature: list PHYs (--show-phys)
* Feature: target a specific PHY with some commands (--phy)
* Feature: more attributes for C33 PSE (--show-pse, --set-pse)
* Feature: source information for cable tests (--cable-test[-tdr])
* Feature: JSON output for module info (-m)
* Feature: misc RSS hash info improvements (-x)
* Feature: tsinfo hwtstamp provider (--{get,set}-hwtimestamp-cfg)
* Fix: fix wrong auto-negotiation state (no option)
* Fix: more explicit RSS context action (-n)
* Fix: print PHY address as decimal (no option)
* Fix: fix return value on flow hashing error (-N)
* Fix: fix JSON output for IRQ coalescing
* Fix: fix MDI-X info output (no option)
* Misc: code cleanup in module parsers
* Misc: provide module_info JSON schema
* Misc: add '-j' alias for --json
* Misc: provide AppStream metainfo XML
* Misc: update message descriptions for debugging output
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://github.com/openwrt/openwrt/pull/18803
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add package for linux intel_vpu driver for Intel NPU/VPU
Signed-off-by: Joe Zheng <joe.zheng@intel.com>
Link: https://github.com/openwrt/openwrt/pull/17904
Signed-off-by: Robert Marko <robimarko@gmail.com>
Intel NPU device is an AI inference accelerator integrated with Intel
client CPUs, starting from Intel Core Ultra generation of CPUs
(formerly known as Meteor Lake). It enables energy-efficient execution
of artificial neural network tasks.
The full device name is Neural Processing Unit, but the Linux kernel
driver uses the older name - Versatile Processing Unit (VPU).
This package is for NPU/VPU firmware.
Details in https://github.com/intel/linux-npu-driver
Intel VPU firmware is now part of linux-firmware.
The current FW file names in linux-firmware do not match intel vpu
driver, create links to fix it
details in
https://github.com/torvalds/linux/blob/master/drivers/accel/ivpu/ivpu_fw.c
Signed-off-by: Joe Zheng <joe.zheng@intel.com>
Link: https://github.com/openwrt/openwrt/pull/17904
Signed-off-by: Robert Marko <robimarko@gmail.com>
TP-Link EAP625-Outdoor HD is a 802.11ax AP claiming AX1800 support.
It is wall or pole mountable, and rated for outdoor use. It can only
be powered via PoE.
Hardware-wise, it is very similar to the older EAP610-Outdoor model.
Software-wise, I couldn't find a difference other than the board
data files, and device name. For this reason, the majority of the
devicetree from the EAP610-Outdoor is reused.
This device currently comes in a "v1", and "v1.6" version. The
"support-list" of the vendor firmware does not have a distinction
between these versions. This commit was tested on a 'V1.6" device.
Specifications:
---------------
* CPU: Qualcomm IPQ6018 Quad core Cortex-A53
* RAM: 512 MB
* Storage: 128MB NAND
* Ethernet:
* Gigabit RJ45 port with PoE input
* WLAN:
* 2.4GHz/5GHz
* LEDs:
* Multi-color System LED (Green/Amber)
* Buttons:
* 1x Reset
* UART: 4-pin unpopulated header
* 1.8 V level, Pinout 1 - TX, 2 - RX, 3 - GND, 4 - 1.8V
Installation:
=============
Web UI method
-------------
Set up the device using the vendor's web UI. After that go to
Management->SSH and enable the "SSH Login" checkbox. Select "Save".
The connect to the machine via SSH:
ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device>
Disable signature verification:
cliclientd stopcs
Rename the "-web-ui-factory" image to something less than 63
characters, maintaining the ".bin" suffix.
* Go to System -> Firmware Update.
* Under "New Firmware File", click "Browse" and select the image
* Select "Update" and confirm by clicking "OK".
If the update fails, the web UI should show an error message.
Otherwise, the device should reboot into OpenWRT.
NOTE: If ssh continues to complain that "no matching host key type
found. Their offer: ssh-rsa,ssh-dss" it likely means that yor distro
has completely disabled deprecated siphers in ssh. In that case, run
the ssh command from a docker container of an older distro.
TFTP method
-----------
To flash via tftp, first place the initramfs image on the TFTP server.
setenv serverip <ip of tftp server>
setenv ipaddr <ip in same subnet as tftp server>
tftpboot tplink_eap625-outdoor-hd-v1-initramfs-uImage.itb
bootm
This should boot OpenWRT. Once booted, flash the sysupgrade.bin image
using either luci or the commandline.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18584
Signed-off-by: Robert Marko <robimarko@gmail.com>
It's the proper function to handle this stuff in.
The original patch abused the fact that the ath9k driver in init called
ath9k_init_platform to populate all the needed configuration. This is
the wrong place to do so and it also goes away in 6.13.
Move 553-ath9k_of_gpio_mask.patch contents to ath9k_of_init where they
belong.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18764
Signed-off-by: Robert Marko <robimarko@gmail.com>
Adjust the 'inline' declaration order to fix the build warning:
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/ltq-adsl-mei-danube/ltq-adsl-mei/drv_mei_cpe.c:188:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
188 | static void inline MEI_MASK_AND_ACK_IRQ(int x)
| ^~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
fix inline declaration warning
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are a lot of missing-prototypes warnings, It's not worth to
fix them one by one. Let us just ignore them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix incomplete type error by including the correct header.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
* Mark some functions as static.
* Add missing prototypes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
These functions return the register memory addresses. Usually
they are fixed values, hence I think it's safe to remove the
qualifier "volatile".
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Convert .remove to .remove_new so that it can be compatible with
both 6.6 and 6.12 kernels.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Adjust the 'inline' declaration order to fix the build warning.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Include missing header "drv_vmmc_api.h" to fix the compilation errors.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add LANTIQ prefix to workaround the build warnings.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are a lot of missing-prototypes warnings, It's not worth to
fix them one by one.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
NULL and fixed addresses are constant, const qualifier are useless.
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:47:1: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
47 | const void (*ifx_bsp_basic_mps_decrypt)(unsigned int addr, int n) = NULL;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:246:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
246 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf0017c4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:249:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
249 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001ea4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:252:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
252 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001f38;
| ^~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix incomplete type error by including the correct header.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add missing header to fix the build errors on 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Mark cgu_get_pp32_clock() as static.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch fixes the following build warnings by adding
missing prototypes:
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_deu_danube.c💯5: error: no previous prototype for 'input_swap' [-Werror=missing-prototypes]
100 | u32 input_swap(u32 input)
| ^~~~~~~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/ltq-deu-ar9/ltq-deu/ifxmips_deu_ar9.c:91:5: error: no previous prototype for 'input_swap' [-Werror=missing-prototypes]
91 | u32 input_swap(u32 input)
| ^~~~~~~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/ltq-deu-ar9/ltq-deu/ifxmips_deu_ar9.c:131:6: error: no previous prototype for 'chip_version' [-Werror=missing-prototypes]
131 | void chip_version(void)
| ^~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch fixes various missing-prototypes build warnings by:
* Mark some functions as static.
* Add missing prototypes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch fixes various missing-prototypes build warnings on
6.12 kernel.
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_ase/ltq-atm-ase/ltq-atm/ifxmips_atm_amazon_se.c:257:13: error: no previous prototype for 'ase_fw_ver' [-Werror=missing-prototypes]
257 | extern void ase_fw_ver(unsigned int *major, unsigned int *minor)
| ^~~~~~~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_ase/ltq-atm-ase/ltq-atm/ifxmips_atm_amazon_se.c:266:5: error: no previous prototype for 'ase_init' [-Werror=missing-prototypes]
266 | int ase_init(struct platform_device *pdev)
| ^~~~~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_ase/ltq-atm-ase/ltq-atm/ifxmips_atm_amazon_se.c:283:6: error: no previous prototype for 'ase_shutdown' [-Werror=missing-prototypes]
283 | void ase_shutdown(void)
| ^~~~~~~~~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_ase/ltq-atm-ase/ltq-atm/ifxmips_atm_amazon_se.c:297:5: error: no previous prototype for 'ase_start' [-Werror=missing-prototypes]
297 | int ase_start(int pp32)
| ^~~~~~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_ase/ltq-atm-ase/ltq-atm/ifxmips_atm_amazon_se.c:323:6: error: no previous prototype for 'ase_stop' [-Werror=missing-prototypes]
323 | void ase_stop(int pp32)
| ^~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Mark some functions as static to fix various missing-prototypes
build warnings on 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
fix undefined type error:
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/ltq-atm-vr9/ltq-atm/ltq_atm.c:1776:43: error: invalid use of undefined type 'const struct of_device_id'
1776 | ops = (struct ltq_atm_ops *) match->data;
| ^~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
This package is maintained by the OpenWrt local repository. There
is no need to modify it with the patch file. Just apply all patches
to the source files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Mark some functions as static.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
These functions return the register memory addresses. Usually
they are fixed values, hence I think it's safe to remove the
qualifier "volatile".
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Convert .remove to .remove_new so that it can be compatible with
both 6.6 and 6.12 kernels.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add prototype definition for exported function ifx_mei_atm_led_blink().
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add prototype definition for exported function IFX_Var_Fifo_getRoom().
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add LANTIQ prefix to avoid name conflicts.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
PCI_IRQ_LEGACY was renamed to PCI_IRQ_INTX for kernel 6.10. Fix
compilation error:
/home/db/owrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/vrx518_ep-2.1.0/ep.c:469:69: error: 'PCI_IRQ_LEGACY' undeclared (first use in this function); did you mean 'NR_IRQS_LEGACY'?
469 | err = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_MSI | PCI_IRQ_LEGACY);
| ^~~~~~~~~~~~~~
| NR_IRQS_LEGACY
Signed-off-by: Andre Heider <a.heider@gmail.com>
Co-authored-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changelog:
0379096 libtracefs: version 1.8.2
e2e0b4d sqlhist: Add bash completion for the sqlhist utility
78dd6d5 libtracefs: Add trace_sql.bash for tracefs_sql() bash completions
4f66bca libtracefs: Fix trace_sql() to handle buckets cast
6680dae libtracefs: Have tracefs_sql() cast handle stacktrace
4668195 libtracefs: Handle synthetic events with dynamic strings as fields
48a7752 libtracefs: Fix COMM for use as a field for tracefs_sqlhist()
a8d57d2 libtracefs: Fix mistaken update to TRACEFS_STACKTRACE macro
6e913f7 libtracefs: utest: Do not fail if uprobes are not supported by kernel
5db5cf5 libtracefs: Rerun bison and flex via make sqlhist_remake
1514530 libtracefs: Add make sqlhist_remake to run bison and flex
d49b6fa libtrace: Fix memory leak in tracefs_cpu
07cff64 libtracefs: Fix the read file failure code checking
457f02f trace-cmd: Unit test for tracefs_instance_file_append() API
a2bfb49 libtracefs: utest: Rename private functions to fix static building
65f629e libtracefs utest: Do not test more events than what the ring buffer can hold
05a5dc4 libtracefs utest: Fix min percent test
0a46992 libtracefs utest: Add test to check handling multiple dynamic events
bd47435 libtracefs: Destroy synthetic and eprobes before other events
78d8d2e libtracefs: Have tracefs_dynevent_get_all() find kprobes and uprobes properly
ef70c00 libtracefs .gitignore: Ignore utest/trace-utest in git
ff20336 libtracefs utest: Do not test kprobe interface if there's no kprobes
93d9049 libtracefs: Have tracefs_instance_tracers() return instance tracers
4cbebed libtracefs: Documentation: Add missing documentation to meson.build
Link: https://github.com/openwrt/openwrt/pull/18783
Signed-off-by: Nick Hainke <vincent@systemli.org>
567207a9bf16 fs: implement fileno() on directory handles
eb1d93235509 fs: support passing directory handle or fd in chdir()
38a2254337f1 build: detect whether toolchain employs default source fortification
6eddfc9dff17 resolv: fix fd leak in send_queries
3d36856b2dc5 uci: fix memory leak on cursor() error
aafde95f1ecf uci: add cursor() flags argument
d8cebc5a6bfd Revert "WIP: lib: support map() over objects"
2599cf80736b zlib: incorporate latest PR changes
830f316a7e49 socker: let sock.peercred() clear error on success
4cbac141406e types: rename u64_to_constant flag to ext_flag
d802fe5da5cd types: add support for resources with embedded data/values
71b4fdc6f60b types: add support for setting resource persistent flag
141f799eba08 uloop: use container_of instead of direct pointer casts
1396f8f2988d uloop: use uc_fn_thisval
9a121fc7440c uloop: drop object_registry
11b804d97086 socket: do not clear last_error in socket.error()
d5b3a9dc1091 socket: add strerror() method
Fixes: https://github.com/jow-/ucode/issues/285
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Backport patches to support scans of WiFi 7 APs.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/18741
Signed-off-by: Robert Marko <robimarko@gmail.com>
Enable Device Provisioning Protocol (DPPv2) in hostapd
for the "full" build-variants.
DPPv2 currently does not compile with WolfSSL due to
missing PKCS7 and certificate support.
Link: https://github.com/openwrt/openwrt/pull/18485
Signed-off-by: Gustavo Bertoli <gubertoli@gmail.com>
This new version introduces many compilation error fixes for
the upcoming 6.12 kernel. Changelogs:
04923c5 "Fix build failures observed so far" - take three.
b4263cc "Fix build failures observed so far" - take two.
de595b4 Fix build failures observed so far
1c0066a Zero checksum handling for UDP4->UDP6
b42c37d Fix crash when viewing nat46 kernel module config
3a9f630 nat46-module: fix modpost warning
88b91ca gha: use checkout@v4 action instead of checkout@v2
84ba13a gha: enable github action on push/PR
f367088 fix the compilation error
03c14bf gha: clean-up the yaml definition
d964921 Create c-compile.yml
cb69317 "Add network namespace awareness to nat46" - take two.
8302f42 Revert "Add network namespace awareness to nat46"
91b8e68 Add network namespace awareness to nat46
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Instead of having to deal with patch files, lets use the newly made
OpenWrt GIT repo as the SSDK upstream[1].
All existing patches have been applied to the same source commit, so
there should be no intended changes.
[1] https://github.com/openwrt/qca-nss-dp.git
Signed-off-by: Robert Marko <robimarko@gmail.com>
Instead of having to deal with patch files, lets use the newly made
OpenWrt GIT repo as the SSDK upstream[1].
All existing patches have been applied to the same source commit, so
there should be no intended changes.
[1] https://github.com/openwrt/qca-ssdk.git
Signed-off-by: Robert Marko <robimarko@gmail.com>
Commit 7db0748b7b ("kernel: modules: split package fs-fscache") modified
the KCONFIG section of KernelPackage/fs-netfs but missed to add a
backslash to escape a linebreak. Add it now.
Fixes: 7db0748b7b ("kernel: modules: split package fs-fscache")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The legacy FW tarball hash is wrong, fix it.
Fixes: ea83f7de2b ("ath11k-firmware: add wifi firmware for IPQ5018")
Signed-off-by: Robert Marko <robimarko@gmail.com>
In this new version channel 177 is supported.
Dropped patches:
[1] 001-patch-version.patch
[2] 205-ath10k-ct-silence-warning-caused-by-unsupported-retr.patch
[1] [2] 8adb310f84
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18731
Signed-off-by: Robert Marko <robimarko@gmail.com>
On big endian platforms, scans show invalid info for WiFi 6 APs.
This commit backports patches to fix this issue.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/18717
Signed-off-by: Robert Marko <robimarko@gmail.com>
The RPi 5 Compute Module expects the same NVRAM as the one from RPi 4
on a different file.
Signed-off-by: Dave Marquard <dave-atx@users.noreply.github.com>
Link: https://github.com/openwrt/openwrt/pull/18722
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
With kernel 6.11 iio-core gained a dependency to DMA_SHARED_BUFFER,
so add the appropriate dependency.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
With kernel 6.11 several mtk usb functions were moved from btusb to
btmtk, adding a usb core depdendency to btmtk (if enabled).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
libiconv 1.17 fails to compile with GCC15 when doing the host build,
luckily version 1.18 already contains the fixes required so update to it.
New in 1.18:
* Many more transliterations, in particular also of Emoji characters.
* The iconv_open function is now POSIX:2024 compliant: it recognizes a
suffix //NON_IDENTICAL_DISCARD in the 'tocode' argument, with the effect
that characters that cannot be represented in the target character set
will be silently discarded. Whereas the suffix //IGNORE in the 'tocode'
argument has the effect of discarding not only characters that cannot be
represented in the target character set, but also invalid multibyte
sequences in the input.
Accordingly, the iconvctl function accepts requests
ICONV_GET_DISCARD_INVALID, ICONV_SET_DISCARD_INVALID,
ICONV_GET_DISCARD_NON_IDENTICAL, ICONV_SET_DISCARD_NON_IDENTICAL.
* The iconv_open function and the iconv program now support multiple suffixes,
such as //TRANSLIT//IGNORE, not only one.
* GB18030 is now an alias for GB18030:2005. A new converter for GB18030:2022
is added. Since this encoding merely cleans up a few private-use-area
mappings, you can continue to use the GB18030 converter, for backward
compatibility. Its Unicode to GB18030 conversion direction has been
enhanced, to help transitioning away from PUA code points.
* When converting from/to an EBCDIC encoding, a non-standard way of
converting newlines can be requested
- at the C level, by calling iconvctl with argument ICONV_SET_FROM_SURFACE
or ICONV_SET_TO_SURFACE, or
- from the iconv program, by setting the environment variable
ICONV_EBCDIC_ZOS_UNIX to a non-empty value.
* Special support for z/OS: The iconv program adds a charset metadata tag to
its output file. (Contributed by Mike Fulton.)
* For conversions from UCS-2, UCS-4, UTF-16, UTF-32, invoking
iconv(cd,NULL,NULL,...) now preserves the byte order state.
Link: https://github.com/openwrt/openwrt/pull/18698
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems that this was required many years ago (It was added in 2012),
probably due to relying on outdated or broken libtool versions, but 1.17
uses libtool 2.4.7.
After trying building both host and target libiconv versions on Fedora and
MacOS I cannot seem to find what patch-libtool is supposed to fixup.
So, I can only presume that it is completely uneeded these days and can
be dropped.
Link: https://github.com/openwrt/openwrt/pull/18698
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bump version to fix compiling with GCC14.
This fixes the following compile problem:
```
dns320l-daemon.c: In function 'main':
dns320l-daemon.c:740:18: error: implicit declaration of function 'isprint' [-Wimplicit-function-declaration]
740 | else if (isprint (optopt))
| ^~~~~~~
dns320l-daemon.c:50:1: note: include '<ctype.h>' or provide a declaration of 'isprint'
49 | #include "dns320l-daemon.h"
+++ |+#include <ctype.h>
50 |
dns320l-daemon.c:799:5: error: implicit declaration of function 'umask' [-Wimplicit-function-declaration]
799 | umask(0);
| ^~~~~
dns320l-daemon.c:864:5: error: 'return' with no value, in function returning non-void [-Wreturn-mismatch]
864 | return;
| ^~~~~~
dns320l-daemon.c:691:5: note: declared here
691 | int main(int argc, char *argv[])
| ^~~~
```
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
This fixes the following compile problem:
```
dns320l-daemon.c: In function 'main':
dns320l-daemon.c:740:18: error: implicit declaration of function 'isprint' [-Wimplicit-function-declaration]
740 | else if (isprint (optopt))
| ^~~~~~~
dns320l-daemon.c:50:1: note: include '<ctype.h>' or provide a declaration of 'isprint'
49 | #include "dns320l-daemon.h"
+++ |+#include <ctype.h>
50 |
dns320l-daemon.c:799:5: error: implicit declaration of function 'umask' [-Wimplicit-function-declaration]
799 | umask(0);
| ^~~~~
dns320l-daemon.c:864:5: error: 'return' with no value, in function returning non-void [-Wreturn-mismatch]
864 | return;
| ^~~~~~
dns320l-daemon.c:691:5: note: declared here
691 | int main(int argc, char *argv[])
| ^~~~
```
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes the following compile problem:
```
arv7506pw11.c: In function 'show_boot_progress':
arv7506pw11.c:59:24: error: 'return' with a value, in function returning void [-Wreturn-mismatch]
59 | return 0;
| ^
arv7506pw11.c:56:6: note: declared here
56 | void show_boot_progress(int arg)
| ^~~~~~~~~~~~~~~~~~
arv7506pw11.c:71:16: error: 'return' with a value, in function returning void [-Wreturn-mismatch]
71 | return 0;
| ^
arv7506pw11.c:56:6: note: declared here
56 | void show_boot_progress(int arg)
| ^~~~~~~~~~~~~~~~~~
```
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes the following compile problem:
```
checking for asm/types.h... dsl_cpe_linux.c: In function 'DSL_CPE_ThreadInit':
dsl_cpe_linux.c:779:25: error: assignment to 'DSL_CPE_Thread_t' {aka 'int'} from 'pthread_t' {aka 'struct __pthread *'} makes integer from pointer without a cast [-Wint-conversion]
779 | pThrCntrl->tid = tid;
| ^
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadDelete':
dsl_cpe_linux.c:862:44: error: passing argument 1 of 'pthread_cancel' makes pointer from integer without a cast [-Wint-conversion]
862 | switch(pthread_cancel(pThrCntrl->tid))
| ~~~~~~~~~^~~~~
| |
| DSL_CPE_Thread_t {aka int}
In file included from dsl_cpe_linux.h:35:
/builder/shared-workdir/build/staging_dir/toolchain-mips_mips32_gcc-14.2.0_musl/include/pthread.h:98:20: note: expected 'pthread_t' {aka 'struct __pthread *'} but argument is of type 'DSL_CPE_Thread_t' {aka 'int'}
98 | int pthread_cancel(pthread_t);
| ^~~~~~~~~
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadIdGet':
dsl_cpe_linux.c:1123:11: error: returning 'pthread_t' {aka 'struct __pthread *'} from a function with return type 'DSL_CPE_Thread_t' {aka 'int'} makes integer from pointer without a cast [-Wint-conversion]
1123 | return pthread_self();
| ^~~~~~~~~~~~~~
```
While at it, fix also some additional build warnings.
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix following warnings by including the corresponding headers:
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:50:6: error: no previous prototype for 'ath9k_hsr_init' [-Werror=missing-prototypes]
50 | void ath9k_hsr_init(struct ath_hw *ah)
| ^~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:165:5: error: no previous prototype for 'ath9k_hsr_disable' [-Werror=missing-prototypes]
165 | int ath9k_hsr_disable(struct ath_hw *ah)
| ^~~~~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:177:5: error: no previous prototype for 'ath9k_hsr_enable' [-Werror=missing-prototypes]
177 | int ath9k_hsr_enable(struct ath_hw *ah, int bw, int fq)
| ^~~~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:234:5: error: no previous prototype for 'ath9k_hsr_status' [-Werror=missing-prototypes]
234 | int ath9k_hsr_status(struct ath_hw *ah)
| ^~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update USB shutdown callback for the 6.12 kernel. A sprintf
overlaps issue is also fixed in this patch. Unfortunately,
there are dozens of missing-prototypes warnings so it's hard
to fix them one by one. Let's just silence them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch fixes a lot of missing-prototypes warnings for the
upcoming 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Convert platform driver .remove to .remove_new to fix the
incompatible pointer type error on 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix mt76 build error on 6.12 kernel:
In file included from /workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mt76-2025.04.11~be28ef77/mt76x0/eeprom.c:13:
/workspaces/openwrt/staging_dir/target-x86_64_musl/usr/include/mac80211-backport/asm/unaligned.h:3:15: fatal error: asm/unaligned.h: No such file or directory
3 | #include_next <asm/unaligned.h>
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move rt2x00lib_read_eeprom() function prototype from rt2800lib.h to
rt2x00.h and make rt6352_enable_pa_pin() static to fix the missing
prototypes warnings:
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c:213:5: error: no previous prototype for 'rt2x00lib_read_eeprom' [-Werror=missing-prototypes]
213 | int rt2x00lib_read_eeprom(struct rt2x00_dev *rt2x00dev)
| ^~~~~~~~~~~~~~~~~~~~~
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2800lib.c:308:6: error: no previous prototype for 'rt6352_enable_pa_pin' [-Werror=missing-prototypes]
308 | void rt6352_enable_pa_pin(struct rt2x00_dev *rt2x00dev, int enable)
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
A patch was added upstream to temporary enable RTC clock configuration only
for STM32MP15 boards. Use this patch instead of reverting commit 03a581e2.
Now for STM32MP135 boards RTC clock configuration is handled by optee-os.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18628
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This reverts commit 5687f448a4.
This unfortunately is currently breaking all targets during building
as in 6.6 kernel there is
no CONFIG_NET_DSA_TAG_VSC73XX_8021Q, it was added in 6.11 AFAIK.
So they will all fail due to $(LINUX_DIR)/net/dsa/tag_vsc73xx_8021q.ko missing.
So revert until kmod is fixed.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update policycoreutils to latest 3.8.1 release and add a fix for building
with GCC14 and musl.
Fix will be sent upstream.
Link: https://github.com/openwrt/openwrt/pull/18674
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update libsemanage to latest 3.8.1 release and add an upstream backport[1]
that fixes compilation with GCC14 due to basename.
[1] a339594da6
Link: https://github.com/openwrt/openwrt/pull/18674
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add missing depends kmod-fb.
Package kmod-backlight is missing dependencies for the following libraries:
fb.ko
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing depends kmod-i2c-core.
Package kmod-hwmon-core is missing dependencies for the following libraries:
i2c-core.ko
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Updated for compatibility with kernels 6.6 and 6.12.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Create a crypto-lib-aescfb package needed for new deps for kmod-tpm.
Package kmod-tpm is missing dependencies for the following libraries:
ecdh_generic.ko
kpp.ko
libaescfb.ko
Co-authored-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Trying to compile EAD with now default GCC14 will fail due to now erroring
out on implicit int type as well as implicit function declarations.
Due to this, the packaged configure script will fail on the simple compiler
test as the generated test uses main loop with an implicit int type.
So, instead of patching multiple test cases in the shipped configure script
for tinysrp lets run autoreconf on it so its regenerated.
We also need to pass -Wno-error=implicit-function-declaration as there are
multiple instances of tinysrp code relying on implicit function declarations.
Link: https://github.com/openwrt/openwrt/pull/18645
Signed-off-by: Robert Marko <robimarko@gmail.com>
with more new device, now able to flash oem
images from luci, fwtools erroneously marks
firmware as incompatible and does not warn
across keeping configs during update.
this patch aims to add both oem detection
and a warning msg advising firmware is compatible
(OpenWrt -> OEM) but configuration is not
tested on ipq5018: gl-b3000
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
package: basefiles: add oem image dectection to fwtool
some new devices are now able to flash oem
images from luci, fwtools erroneously marks
firmware as incompatible and does not warn
of keeping configs during update for this condition.
this patch aims to add both oem detection
and trigger the existing warning msg, advising firmware is compatible
(OpenWrt -> OEM) but configuration is not
tested on ipq5018: gl-b3000
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18554
Signed-off-by: Robert Marko <robimarko@gmail.com>
- only run a single poll in the uloop_fd cb to avoid use-after-free on close
- delete the uloop_fd on close
- when calling into ucode, fetch the vm pointer before the call in order
to avoid accessing the stale uline context
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Easy way to add compatibility for kernel 6.12.
Since the linux 3.8 patch undoes a bunch of stuff in platform, just
modiify everything in platform.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18616
Signed-off-by: Robert Marko <robimarko@gmail.com>
YAFFS support in U-Boot is basically abandoned and will even fail to
build with GCC14, so simply disable it.
Link: https://github.com/openwrt/openwrt/pull/18598
Signed-off-by: Robert Marko <robimarko@gmail.com>
uImage.FIT validation was restricted to certain sub-image types
which is problematic as it then won't validate eg. 'filesystem' type
subimages. Also prevent decompressing sub-images into a arbitrary
sized buffer just to then free that buffer -- there is not need to
do this and creating malicious compressed payloads which overflow the
buffer is too easy.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Since the irq gets copied to sc, it's a really bad idea to use devm,
especially when probe fails.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Fixes: 4e18d22 ("mac80211: ath9k: simplify probe with devm")
Link: https://github.com/openwrt/openwrt/pull/18570
Signed-off-by: Robert Marko <robimarko@gmail.com>
Instead of enabling RSS support, let's introduce a variant and let users
choose between both variants since it can cause network issues.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
We need both ENABLE_RSS_SUPPORT and ENABLE_MULTIPLE_TX_QUEUE in order to
support multiple RX and TX queues.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
We need both ENABLE_RSS_SUPPORT and ENABLE_MULTIPLE_TX_QUEUE in order to
support multiple RX and TX queues.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
We need both ENABLE_RSS_SUPPORT and ENABLE_MULTIPLE_TX_QUEUE in order to
support multiple RX and TX queues.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18509
[bump release, improve commit description and package changes]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Disable ASPM support for this NIC, fixing strange behavior problems, such as
increased latency, strange uneven throughput, etc.
With this option disabled the NIC achieves stable performance.
Upsteam r8169 driver disables ASPM by default for this NIC.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18509
[bump release, fix commit description, split 2nd tx queue part]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18509
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
ELECOM WRC-X3000GS2 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
IPQ5018.
Specification:
- SoC : Qualcomm IPQ5018
- RAM : DDR3 256 MiB (Zentel A3T2GF40CBF-HP)
- Flash : SPI-NAND 128 MiB (Macronix MX35UF1G24AD-Z4I)
- WLAN : 2.4/5 GHz 2T2R
- 2.4 GHz : Qualcomm IPQ5018 (SoC)
- 5 GHz : Qualcomm Atheros QCN6102
- Ethernet : 5x 10/100/1000 Mbps
- wan (phy) : Qualcomm IPQ5018 (SoC)
- lan (switch) : Qualcomm Atheros QCA8337
- LEDs/Keys (GPIO): 8x/3x
- UART : through-hole on PCB, 4pins near the barcode
- assignment : 3.3V, TX, RX, NC, GND from the barcode side
- settings : 115200n8
- Power : 12 VDC, 1 A (Max. 11.5W)
Flash instruction using initramfs-factory.bin image:
1. Boot WRC-X3000GS2 normally with router mode
2. Access to the WebUI ("http://192.168.2.1/") on the device and open
the firmware update page ("ファームウェア更新")
3. Select the OpenWrt factory.bin image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing
Switching to the stock firmware:
1. Load the elecom.sh script
. /lib/upgrade/elecom.sh
2. Check the current index of rootfs
bootconfig_rw_index 0:bootconfig rootfs
3. Set the index to inverted value
bootconfig_rw_index 0:bootconfig rootfs <value>
bootconfig_rw_index 0:bootconfig1 rootfs <value>
example:
- step2 returned "0":
bootconfig_rw_index 0:bootconfig rootfs 1
bootconfig_rw_index 0:bootconfig1 rootfs 1
- step2 returned "1":
bootconfig_rw_index 0:bootconfig rootfs 0
bootconfig_rw_index 0:bootconfig1 rootfs 0
4. Reboot
Partition Layout (Stock FW):
0x000000000000-0x000000080000 : "0:SBL1"
0x000000080000-0x000000100000 : "0:MIBIB"
0x000000100000-0x000000140000 : "0:BOOTCONFIG"
0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
0x000000180000-0x000000280000 : "0:QSEE"
0x000000280000-0x000000380000 : "0:QSEE_1"
0x000000380000-0x0000003c0000 : "0:DEVCFG"
0x0000003c0000-0x000000400000 : "0:DEVCFG_1"
0x000000400000-0x000000440000 : "0:CDT"
0x000000440000-0x000000480000 : "0:CDT_1"
0x000000480000-0x000000500000 : "0:APPSBLENV"
0x000000500000-0x000000640000 : "0:APPSBL"
0x000000640000-0x000000780000 : "0:APPSBL_1"
0x000000780000-0x000000880000 : "0:ART"
0x000000880000-0x000000900000 : "0:TRAINING"
0x000000900000-0x000003c40000 : "rootfs"
0x000003c40000-0x000003fc0000 : "Config"
0x000003fc0000-0x000007300000 : "rootfs_1"
0x000007300000-0x000007680000 : "Config_2"
0x000007680000-0x000007b80000 : "Reserved"
0x000007b80000-0x000007c00000 : "FWHEADER"
0x000007c00000-0x000007c80000 : "Factory"
Known Issues:
- All Wi-Fi related peripherals are disabled.
This device has only 256 MiB RAM and it's too few for ath11k. To
prevent OOM when using LuCI or other softwares, disable Wi-Fi related
peripherals in device tree at the moment.
- This device has a Macronix MX35UF1G24AD SPI-NAND chip registered as
oobsize=128 in Linux Kernel. But using BCH8 breaks I/O on the chip
with the following errors, so this support uses BCH4 instead.
root@OpenWrt:~# strings /dev/mtdblock10
[26427.133154] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
[26427.134125] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[26427.142240] I/O error, dev mtdblock10, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[26427.151427] I/O error, dev mtdblock10, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[26427.160440] I/O error, dev mtdblock10, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[26427.169619] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[26427.178083] Buffer I/O error on dev mtdblock10, logical block 0, async page read
Notes:
- This device has dual-boot feature and it's managed by the index in the
0:bootconfig and 0:bootconfig1 partitions.
MAC Addresses:
LAN : 38:97:A4:xx:xx:60 (0:APPSBLENV, "eth1addr"/"ethaddr" (text))
WAN : 38:97:A4:xx:xx:63 (0:APPSBLENV, "eth0addr" (text))
2.4 GHz: 38:97:A4:xx:xx:61 (0:APPSBLENV, "wifi0" (text))
5 GHz : 38:97:A4:xx:xx:62 (0:APPSBLENV, "wifi1" (text))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18543
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for ELECOM WRC-X3000GS2 to update "bootdelay" variable
configured as "0" by default when sysupgrade.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18543
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changes: https://github.com/u-boot/u-boot/compare/v2025.01...v2025.04
Drop patch 100-rockchip-add-FriendlyElec-NanoPi-R3S.patch. U-Boot
upstream now supports this board.
Tested on Radxa ROCK 5B+.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The TP-link Deco X80-5G is a AX WIFI router with a single 1G (LAN) and 1 2.5G (WAN) port with a built in Quectel 5G modem.
Specifications:
Architecture ARMv8-A (aarch64 Cortex A53, 4 cores)
Vendor Qualcomm
Bootloader U-Boot (2016)
System-On-Chip Qualcomm IPQ8074A (Networking Pro 1210 platform)
CPU/Speed 2.2GHZ
Flash-Chip ESMT F59D1G81MB-45TI 1G-bit NAND
Flash MB 128MB (1Gbit)
RAM-chip 2* ESMT M15T4G16256A-DEBG2G 2Gb DDR3L (32bit)
RAM MB 512MB (4Gbit)
WLan System-On-Chip (5g) Qualcomm QCN5054
WLan Front end modules (5g) 8* Qorvo QPF4588
WLAN (5G) A/N/AC/AX
WLAN Antenna (int) 8* (4 shared with 2.5G)
WLan System-On-Chip (2.4G) Qualcomm QCN5024
WLan Front end modules (2.4G) 4* Skyworks SKY85340-11
WLAN (2.4G) B/G/N/AX
WLAN Antenna (int) 4* (shared with 5g)
Eithernet-phy (1Gbit) Qualcomm (Atheros) AR8033-AL1A
Ethernet (1Gbit) 1*
Eithernet-phy (2.5Gbit) Qualcomm QCA8081
Ethernet (2.5Gbit) 1*
Switch Embedded in the SOC?
Serial 1.8v 8n1 (testpoints)
Modem System-On-Chip Qualcomm 5G RG50xQ (Snapdragon X55 platform)
5G modem capability 5000Mbps down 900Mbps up
5G modem bands N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78/N79
4G modem capability 4.5G LTE-Advanced Pro (Cat20 down 2Gbps) (Cat18 up 200Mbps)
4G modem FDD bands B1/B3/B5/B7/B8/B18/B19/B20/B26/B28
4G modem TDD bands B34/B38/B39/B40/B41/B42/B43
Modem antenna (int) 8* (5G/4G use)
Modem antenna (ext) 2* SMA connectors (5G/4G use)
SIM type 1* Nano SIM
Telephony 1* POTS RJ11
(see wiki for more info:)
https://openwrt.org/inbox/toh/tp-link/x80-5g_v1
Notes:
Installation Instructions:
Between antennas 7 and 8 on the PCB with the RGB harness there are three test pads labelled TP1 TP2 and TP3 connections are as follows:
|TP2|-- RX
|TP1|-- TX
|TP3|-- GND
RX requires an external pullup to operate somewhere around 5 K ohm but your luck may vary the Uart is 1.8v
Set a static IP and set up a tftpserver and terminal.
power the router and quickly type the magic string “tpl” and press enter to break into u-boot
in the shell set the environment variables to enable tftp booting
setenv ipaddr (routerIP)
setenv serverip (server IP)
load you initramfs:
tftpboot 0x44000000 (serverIP):openwrt-qualcommax-ipq807x-tplink_x80-5g-initramfs-uImage.itb
boot your initramfs
bootm
upload your factory image to /tmp
format and install the factory image:
ubiformat /dev/mtd12 -y -f /tmp/openwrt-qualcommax-ipq807x-tplink_x80-5g-squashfs-factory.ubi
Note as this device swaps root partitions upon update your boot partition may be set as mtd13
Update script to mount factory tplink partition's for MAC recovery and device data.
Capture Labelmac from Factory_data partition.
Patch LAN from Labelmac.
Patch ART from Labelmac.
Set GPIO to make modem operational from boot.
GPIO fan tables work like the stock device with three fan maps high active idle with a top fan speed of 6800 RPM.
High temp 70 deg speeds 6-8
Active temp 50 deg speeds 2-5
low temp 25 degree speed 0-1
Signed-off-by: jonathan brophy <professor_jonny@hotmail.com>
Link: https://github.com/openwrt/openwrt/pull/16329
Signed-off-by: Robert Marko <robimarko@gmail.com>
Prevent flashing truncated or otherwise corrupted uImage.FIT images
by verifying checksums and hashes of all sub-images before flashing
using the newly packaged fit_check_sign tool.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Introduce special handling for return code 74 (EBADMSG) of
platform_check_image which will mark the image as broken and hence
not allow the user to override the check using the --force option.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
APK is currently broken when built with GCC15 and LTO as it will then hang
indefinitevely on the package/install step.
Luckily, upstream was able to find the issue and fix it, so lets backport
the fix as GCC15 is the default compiler on Fedora 42(And soon more distros)
Link: https://github.com/openwrt/openwrt/pull/18549
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Xiaomi MiWiFi 3A wireless router has a similar system architecture as the Xiaomi Mi 4A router, which is already officially supported by OpenWrt.
Product website: https://www.mi.com/miwifi3a
Device specification
--------------------
SoC: MT7628AN MIPS_24KEc @ 580 MHz 2.4G-bgn 2x2
WiFi: MT7612EN 5G-an, ac 80 MHz 2T2R
Flash: 16 MB
DRAM: 64 MB
Switch: MT7628AN (integrated in SoC)
Ethernet: 1 x 10 /100 Mbps
USB: None
Antennas: 2 x 2,4 GHz and 2 x 5 GHz (all are external and non-detachable)
LEDs: blue/red/amber
Buttons: Reset
Serial: 115200,8n1
MAC addresses as verified by OEM firmware:
------------------------------------------
use address source
LAN *:DD factory 0x28
WAN *:DD factory 0x28
2g *:DE factory 0x4
5g *:DF factory 0x8004
OEM firmware uses VLAN's to create the network interface for WAN and LAN.
Bootloader info:
----------------
The stock bootloader uses a "Dual ROM Partition System".
OS1 is a deep copy of OS2.
The bootloader starts OS2 by default.
To force start OS1 it is needed to set "flag_try_sys2_failed=1".
How to install:
---------------
1- Use OpenWRTInvasion to gain Telnet, SSH and FTP access: https://github.com/acecilia/OpenWRTInvasion
[IP: 192.168.31.1 | Username: root | Password: root | FTP-Port: 21]
2- Connect to router using telnet or ssh.
3- Backup all partitions. Use command "dd if=/dev/mtd0 of=/tmp/mtd0". Copy /tmp/mtd0 to computer using ftp.
4- Copy openwrt-ramips-mt76x8-xiaomi_miwifi-3a-squashfs-sysupgrade.bin to /tmp in router using ftp.
5- Enable UART access and change start image to OS1.
nvram set uart_en=1
nvram set flag_last_success=1
nvram set boot_wait=on
nvram set flag_try_sys2_failed=1
nvram commit
6- Erase OS1 & OS2 and install OpenWrt
mtd erase OS1
mtd erase OS2
mtd -r write /tmp/openwrt-ramips-mt76x8-xiaomi_miwifi-3a-squashfs-sysupgrade.bin OS1
Credits:
--------
This PR is based on the work of Zehao Zhang (Github: @ZZH-Finalize) that he had published in the PR: #15698
Signed-off-by: Olgun Demir <olgun.demir@mail.com.tr>
Link: https://github.com/openwrt/openwrt/pull/18427
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If SYS_statmount/SYS_listmount is not provided by the libc,
util-linux will fall back to __NR_statmount/__NR_listmount from the
kernel UAPI headers.
However it is not guaranteed that these symbols are actually visible in
mount-api-utils.
Include linux/unistd.h which provides syscall numbers.
While this header is specific to Linux, the code is already using
linux/mount.h.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18539
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Some ISPs require the client ID to be set in the DHCP and DHCPv6
requests. OpenWrt sets the client id for IPv6 but not for IPv4 by
default.
Align this behavior between DHCPv4 and DHCPv6.
ISPs that require this measure are Deutsche Glasfaser as well as some
Entega connections.
Signed-off-by: David Bauer <mail@david-bauer.net>
Add support for GL.iNET (AX3000) B3000.
Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Winbond W634GU6NQB-11 (512 MiB DDR3-933)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
* Wi-Fi: QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to an external
QCA8337 switch (3 Ports 10/100/1000 GBASE-T)
* Flash: Winbond W25N01GWZEIG (128 MiB)
* LEDs: 1x single-color blue LED (GPIO 24 Active High)
1x single-color white LED (GPIO 23 Active High)
* Buttons: 1x Reset (GPIO 27 Active Low)
Flash Instructions:
*** The .img files are now universal ! ***
Openwrt --> openwrt-qualcommax-ipq50xx-glinet_gl-b3000-squashfs-factory.img
GL.iNet OEM --> openwrt-b3000-4.5.18-0731-1722397535.img
Either file can be flashed, in any of the available upgrade options, in both Firmwares.
Pick a file .. pick a method .. and SEND IT !!
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17903
Signed-off-by: Robert Marko <robimarko@gmail.com>
The nvram file is generic for all stm32 boards, add a symlink for
STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add entry for STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add entry for STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add entry for STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add backport patch that fixes ath12k regdomain parsing failure in
6GHz band triggered by the latest regdb/board-2.bin update.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18512
Signed-off-by: Robert Marko <robimarko@gmail.com>
Previous commits missed some refreshing
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18512
Signed-off-by: Robert Marko <robimarko@gmail.com>
During envtools conversion to the generic uboot-tools package, a syncconfig
call was added to the configure step which was previously not there.
We received multiple spourious reports that now envtools were failing to
build [1], but it was not reproducible.
However, it seems that this could easily be reproduced on MacOS 15 and
somehow that syncconfig call is breaking build by Makefile.autoconf not
being executed and thus no "include/config.h" is generated.
So, since this call was not previously there and U-Boot will actually do
syncconfig on its own when needed lets drop it.
[1] 293d5f1366 (commitcomment-154347516)
Link: https://github.com/openwrt/openwrt/pull/18515
Signed-off-by: Robert Marko <robimarko@gmail.com>
Look for OPENWRT_VERBOSE and pass it down to the U-Boot so we actually
get verbose build info when needed for debugging.
Link: https://github.com/openwrt/openwrt/pull/18515
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix an issue where NCM interface initialization fails because of wrong
modem manufacturer detection.
gcom call returns an output with Windows-style line breaks (containing \r)
what makes awk call return empty or malformed manufacturer name. Changing
awk RS variable to handle both \n and \r\n as line break fixes this issue.
Fixes#17448 and #17998 GitHub issues.
Signed-off-by: Jakub Łabuz <jakub@labuz.dev>
Link: https://github.com/openwrt/openwrt/pull/18460
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update uboot-ath79 package to v2025.04 for ath79 devices.
Additionally, new "CONFIG_NO_NET" option was introduced and replaced
disabled CONFIG_NET option ("# CONFIG_NET is not set"). So replace
that old options in the NEC Aterm devices as well.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18475
Signed-off-by: Robert Marko <robimarko@gmail.com>
The submenu of two diag modules is missing, fix it.
Fixes: 65de1e0 ("kernel: add missing symbols for lxc")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/18480
Signed-off-by: Robert Marko <robimarko@gmail.com>
updated 200-ubus_dns.patch
all remaining patches not required
Changelog for version 2.91 - https://thekelleys.org.uk/dnsmasq/CHANGELOG
version 2.91
Fix spurious "resource limit exceeded messages". Thanks to
Dominik Derigs for the bug report.
Fix out-of-bounds heap read in order_qsort().
We only need to order two server records on the ->serial field.
Literal address records are smaller and don't have
this field and don't need to be ordered on it.
To actually provoke this bug seems to need the same server-literal
to be repeated twice, e.g., --address=/a/1.1.1.1 --address-/a/1.1.1.1
which is clearly rare in the wild, but if it did exist it could
provoke a SIGSEGV. Thanks to Daniel Rhea for fuzzing this one.
Fix buffer overflow when configured lease-change script name
is too long.
Thanks to Daniel Rhea for finding this one.
Improve behaviour in the face of non-responsive upstream TCP DNS
servers. Without shorter timeouts, clients are blocked for too long
and fail with their own timeouts.
Set --fast-dns-retries by default when doing DNSSEC. A single
downstream query can trigger many upstream queries. On an
unreliable network, there may not be enough downstream retries
to ensure that all these queries complete.
Improve behaviour in the face of truncated answers to queries
for DNSSEC records. Getting these answers by TCP doesn't now
involve a faked truncated answer to the downstream client to
force it to move to TCP. This improves performance and robustness
in the face of broken clients which can't fall back to TCP.
No longer remove data from truncated upstream answers. If an
upstream replies with a truncated answer, but the answer has some
RRs included, return those RRs, rather than returning and
empty answer.
Fix handling of EDNS0 UDP packet sizes.
When talking upstream we always add a pseudo header, and set the
UDP packet size to --edns-packet-max. Answering queries from
downstream, we get the answer (either from upstream or local
data) If local data won't fit the advertised size (or 512 if
there's not an EDNS0 header) return truncated. If upstream
returns truncated, do likewise. If upstream is OK, but the
answer is too big for downstream, truncate the answer.
Modify the behaviour of --synth-domain for IPv6.
When deriving a domain name from an IPv6 address, an address
such as 1234:: would become 1234--.example.com, which is
not legal in IDNA2008. Stop using the :: compression method,
so 1234:: becomes
1234-0000-0000-0000-0000-0000-0000-0000.example.com
Fix broken dhcp-relay on *BSD. Thanks to Harold for finding
this problem.
Add --dhcp-option-pxe config. This acts almost exactly like
--dhcp-option except that the defined option is only sent when
replying to PXE clients. More importantly, these options are sent
in reply PXE clients when dnsmasq in acting in PXE proxy mode. In
PXE proxy mode, the set of options sent is defined by the PXE standard
and the normal set of options is not sent. This config allows arbitrary
options in PXE-proxy replies. A typical use-case is to send option
175 to iPXE. Thanks to Jason Berry for finding the requirement for
this.
Support PXE proxy-DHCP and DHCP-relay at the same time.
When using PXE proxy-DHCP, dnsmasq supplies PXE information to
the client, which also talks to another "normal" DHCP server
for address allocation and similar. The normal DHCP server may
be on the local network, but it may also be remote, and accessed via
a DHCP relay. This change allows dnsmasq to act as both a
PXE proxy-DHCP server AND a DHCP relay for the same network.
Fix erroneous "DNSSEC validated" state with non-DNSSEC
upstream servers. Thanks to Dominik Derigs for the bug report.
Handle queries with EDNS client subnet fields better. If dnsmasq
is configured to add an EDNS client subnet to a query, it is careful
to suppress use of the cache, since a cached answer may not be valid
for a query with a different client subnet. Extend this behaviour
to queries which arrive a dnsmasq already carrying an EDNS client
subnet.
Handle DS queries to auth zones. When dnsmasq is configured to
act as an authoritative server and has an authoritative zone
configured, and receives a query for that zone _as_forwarder_
it answers the query directly rather than forwarding it. This
doesn't affect the answer, but it saves dnsmasq forwarding the
query to the recursor upstream, which then bounces it back to dnsmasq
in auth mode. The exception should be when the query is for the root
of zone, for a DS RR. The answer to that has to come from the parent,
via the recursor, and will typically be a proof-of-non-existence
since dnsmasq doesn't support signed zones. This patch suppresses
local answers and forces forwarding to the upstream recursor for such
queries. It stops breakage when a DNSSEC validating client makes
queries to dnsmasq acting as forwarder for a zone for which it is
authoritative.
Implement "DNS-0x20 encoding", for extra protection against
reply-spoof attacks. Since DNS queries are case-insensitive,
it's possible to randomly flip the case of letters in a query
and still get the correct answer back.
This adds an extra dimension for a cache-poisoning attacker
to guess when sending replies in-the-blind since it's expected
that the legitimate answer will have the same pattern of upper
and lower case as the query, so any replies which don't can be
ignored as malicious. The amount of extra entropy clearly depends
on the number of a-z and A-Z characters in the query, and this
implementation puts a hard limit of 32 bits to make resource
allocation easy. This about doubles entropy over the standard
random ID and random port combination. This technique can interact
badly with rare broken DNS servers which don't preserve the case
of the query in their reply. The first time a reply is returned
which matches the query in all respects except case, a warning
will be logged. In this release, 0x020-encoding is default-off
and must be explicitly enabled with --do-0x20-encoding. In future
releases it may default on. You can avoid a future release
changing the behaviour of an installation with --no-x20-encode.
Fix a long-standing problem when two queries which are identical
in every repect _except_ case, get combined by dnsmasq. If
dnsmasq gets eg, two queries for example.com and Example.com
in quick succession it will get the answer for example.com from
upstream and send that answer to both requestors. This means that
the query for Example.com will get an answer for example.com, and
in the modern DNS, that answer may not be accepted.
Signed-off-by: Rudy Andram <rmandrad@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18357
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update ca-certificates to version 20241223
* Update Mozilla certificate authority bundle to version 2.70.
The following certificate authorities were added (+):
+ Telekom Security TLS ECC Root 2020
+ Telekom Security TLS RSA Root 2023
+ FIRMAPROFESIONAL CA ROOT-A WEB
+ TWCA CYBER Root CA
+ SecureSign Root CA12
+ SecureSign Root CA14
+ SecureSign Root CA15
The following certificate authorities were removed (-):
- Security Communication Root CA (closes: #1063093)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/18468
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, ls-rcw package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-rcw' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-rcw package in DEVICE_PACKAGES lets select it when
layerscape/armv7 target is selected.
Fixes: #18411
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, ls-ddr-phy package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-ddr-phy' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-ddr-phy package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, ls-dpl package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-dpl' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-dpl package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, ls-mc package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-mc' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-mc package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, fman-ucode package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~fman-ucode' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the fman-ucode package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, tfa-layerscape packages are being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~trusted-firmware-a-ls1012a-frdm' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the individual TFA packages in DEVICE_PACKAGES we can just
do what other targets do and set BUILD_DEVICES so that TFA packages are
automatically set.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, bcm63xx-cfe is being installed into kernel build dir, however
that does not work for Image Builder as only certain artifacts from kernel
build dir are included in Image Builder.
So, simply install bcm63xx-cfe into image staging dir so its artifacts can
be used in Image Builder as well.
Fixes: #18408Fixes: #18409
Link: https://github.com/openwrt/openwrt/pull/18463
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Radxa ROCK 4SE[1] is a single board computer using the Rockchip
RK3399-T.
Hardware
--------
- Dual-core Cortex-A72 and quad-core Cortex-A53 CPU
- Mali-T860MP4 GPU
- LPDDR4 4GB RAM
- M.2 M Key slot (PCIe 2.1 x4)
- eMMC connector
- microSD card slot
- Wi-Fi 5 (not supported)
- Gigabit Ethernet with PoE support (additional PoE HAT required)
- USB 3.0 Type-A OTG port
- USB 3.0 Type-A HOST port
- 2x USB 2.0 Type-A HOST ports
- USB Type-C power port (5V only)
- 40 Pin GPIO header
[1] https://radxa.com/products/rock4/4se
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to the micro SD card or
internal eMMC using dd.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/17554
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Radxa ROCK 4C+[1] is a single board computer with dual HDMI using
the Rockchip RK3399-T.
Hardware
--------
- Dual-core Cortex-A72 and quad-core Cortex-A53 CPU
- Mali-T860MP4 GPU
- LPDDR4 4GB RAM
- eMMC connector
- microSD card slot
- Wi-Fi 5 (not supported)
- Gigabit Ethernet with PoE support (additional PoE HAT required)
- USB 3.0 Type-A OTG port
- USB 3.0 Type-A HOST port
- 2x USB 2.0 Type-A HOST ports
- USB Type-C power port (5V only)
- 40 Pin GPIO header
[1] https://radxa.com/products/rock4/4cp
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to the micro SD card or
internal eMMC using dd.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/17554
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds support for Mercusys MR80X(EU) v3 router.
Device specification:
- SoC: Mediatek MT7981b, Cortex-A53, 64-bit
- RAM: 512MB
- Flash: SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB)
- Ethernet: 4x 100/1000 Mbps LAN1,LAN2,LAN3 & WAN
- Wireless: 2.4GHz (802.11 b/g/n/ax)
- Wireless: 5GHz (802.11 a/n/ac/ax)
- LEDs: 1 orange and 1 green status LEDs, 4 green gpio-controlled LEDs
on ethernet ports
- Buttons: 1 (Reset)
- Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI
slots contain "seconduboot" (also U-Boot 2022.01-rc4)
Installation (UART):
- Place OpenWrt initramfs-kernel image on tftp server with IP 192.168.1.2
- Attach UART, switch on the router and interrupt the boot process by
pressing 'Ctrl-C'.
- Set the uboot environment for startup.
setenv tp_boot_idx 0; setenv bootcmd bootm 0x46000000; saveenv
If the bootarg is set to boot from ubi1, also change it to ubi0.
- Load and run OpenWrt initramfs image.
setenv serverip 192.168.1.2; setenv ipaddr 192.168.1.1; tftpboot initramfs-kernel.bin; bootm
- Browse IP 192.168.1.1, upload the 'sysupgrade' image and do upgrade.
Recovery:
- Press Reset button and power on the router.
- Navigate to U-Boot recovery web server (http://192.168.1.1/) and
upload the OEM firmware.
Stock layout:
0x000000000000-0x000000200000 : "boot"
0x000000200000-0x000000300000 : "u-boot-env"
0x000000300000-0x000003500000 : "ubi0"
0x000003500000-0x000006700000 : "ubi1"
0x000006700000-0x000006f00000 : "userconfig"
0x000006f00000-0x000007300000 : "tp_data"
ubi0/ubi1 format:
U-Boot at boot checks that all volumes are in place:
+-------------------------------+
| Volume Name: uboot Vol ID: 0|
| Volume Name: kernel Vol ID: 1|
| Volume Name: rootfs Vol ID: 2|
+-------------------------------+
MAC addresses:
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| label | 94:0C:xx:xx:xx:12 | label |
| WAN | 94:0C:xx:xx:xx:13 | label+1 |
| LAN | 94:0C:xx:xx:xx:12 | label |
| WLAN 2g | 94:0C:xx:xx:xx:11 | label-1 |
| WLAN 5g | 94:0C:xx:xx:xx:10 | label-2 |
+---------+-------------------+-----------+
label MAC address was found in UBI partition "tp_data", file
"default-mac".
Signed-off-by: Schneider Azima <Schneider-Azima12@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18181
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Some ath12k radios can take long time to initialize and register a
phy. This can cause netifd to fail to detect them during initial scan.
To address this issue, a hotplug script has been added to retry
configuration once they have registered their phy.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18459
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add patches to enable QCN9274 radios that support both 5GHz and 6GHz
bands.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18459
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
In board-2.bin available at linux-firmare regdb is stored with
board-id=255. This change is needed to properly use it.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18459
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
lldpd can send several hardware inventory TLV fields. Extend the init
script to provide these when the existing flag 'lldpmed_no_inventory' is
disabled. Five new methods provide default values for some of them,
taken from /etc/os-release and /etc/board.json.
There is no homogeneous method to determine the hardware serial number,
so it can be provided manually, as can asset ID.
Note: properties >= 32 characters are truncated at send time (by lldpd),
and some (Cisco) equipment displays junk after strings >= 32 characters.
So truncate to 31.
Tested on: 24.10.0 (known compatible with 22 and 23 also)
===
Example
===
The following lldpd config lines:
configure inventory hardware-revision "v0"
configure inventory software-revision "r28427-6df0e3d02a"
configure inventory firmware-revision "OpenWrt 24.10.0"
configure inventory serial-number "ABCDEF-123456"
configure inventory manufacturer "glinet"
configure inventory model "GL.iNet GL-MT6000"
# 32 characters:
configure inventory asset "abcdefghijklmnopqrstuvwxyz 12345"
Produce the following TLV (decoded by Wireshark):
Telecommunications Industry Association TR-41 Committee - Inventory - Hardware Revision
1111 111. .... .... = TLV Type: Organization Specific (127)
.... ...0 0000 0110 = TLV Length: 6
Organization Unique Code: 00:12:bb (Telecommunications Industry Association TR-41 Committee)
Media Subtype: Inventory - Hardware Revision (0x05)
Hardware Revision: v0
Telecommunications Industry Association TR-41 Committee - Inventory - Firmware Revision
1111 111. .... .... = TLV Type: Organization Specific (127)
.... ...0 0001 0011 = TLV Length: 19
Organization Unique Code: 00:12:bb (Telecommunications Industry Association TR-41 Committee)
Media Subtype: Inventory - Firmware Revision (0x06)
Firmware Revision: OpenWrt 24.10.0
Telecommunications Industry Association TR-41 Committee - Inventory - Software Revision
1111 111. .... .... = TLV Type: Organization Specific (127)
.... ...0 0001 0101 = TLV Length: 21
Organization Unique Code: 00:12:bb (Telecommunications Industry Association TR-41 Committee)
Media Subtype: Inventory - Software Revision (0x07)
Software Revision: r28427-6df0e3d02a
Telecommunications Industry Association TR-41 Committee - Inventory - Serial Number
1111 111. .... .... = TLV Type: Organization Specific (127)
.... ...0 0001 0100 = TLV Length: 20
Organization Unique Code: 00:12:bb (Telecommunications Industry Association TR-41 Committee)
Media Subtype: Inventory - Serial Number (0x08)
Serial Number: ABCDEF-123456
Telecommunications Industry Association TR-41 Committee - Inventory - Manufacturer Name
1111 111. .... .... = TLV Type: Organization Specific (127)
.... ...0 0000 1010 = TLV Length: 10
Organization Unique Code: 00:12:bb (Telecommunications Industry Association TR-41 Committee)
Media Subtype: Inventory - Manufacturer Name (0x09)
Manufacturer Name: glinet
Telecommunications Industry Association TR-41 Committee - Inventory - Model Name
1111 111. .... .... = TLV Type: Organization Specific (127)
.... ...0 0001 0101 = TLV Length: 21
Organization Unique Code: 00:12:bb (Telecommunications Industry Association TR-41 Committee)
Media Subtype: Inventory - Model Name (0x0a)
Model Name: GL.iNet GL-MT6000
Telecommunications Industry Association TR-41 Committee - Inventory - Asset ID
1111 111. .... .... = TLV Type: Organization Specific (127)
.... ...0 0010 0011 = TLV Length: 35
Organization Unique Code: 00:12:bb (Telecommunications Industry Association TR-41 Committee)
Media Subtype: Inventory - Asset ID (0x0b)
Asset ID: abcdefghijklmnopqrstuvwxyz 1234
The Cisco DUT displays:
Hardware Revision: v0
Firmware Revision: OpenWrt 24.10.0
Software Revision: r28427-6df0e3d02a
Serial Number: ABCDEF-123456
Manufacturer Name: glinet
Model Name: GL.iNet GL-MT6000
Asset ID: abcdefghijklmnopqrstuvwxyz 1234
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18354
Signed-off-by: Robert Marko <robimarko@gmail.com>
Partially revert removal of 003 patch to fix compilation error with
kernel 6.6.
In 6.6 .remove still require int and .remove_new needs to be used.
Fixes: bfb106e8ae ("mac80211: backport API change for sta rate control update")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
