exposes PoE metrics obtained from realtek-poe
# HELP realtek_poe_switch_info information about the poe controller
# TYPE realtek_poe_switch_info gauge
realtek_poe_switch_info{mcu="ST Micro ST32F100 Microcontroller",firmware="v22.4"} 1
# HELP realtek_poe_switch_budget_watts overall power budget
# TYPE realtek_poe_switch_budget_watts gauge
realtek_poe_switch_budget_watts 77
# HELP realtek_poe_switch_consumption_watts overall power consumption
# TYPE realtek_poe_switch_consumption_watts gauge
realtek_poe_switch_consumption_watts 5
# HELP realtek_poe_port_priority poe priority of port
# TYPE realtek_poe_port_priority gauge
realtek_poe_port_priority{device="lan1"} 1
realtek_poe_port_priority{device="lan2"} 1
[...]
# HELP realtek_poe_port_consumption_watts per port power consumption
# TYPE realtek_poe_port_consumption_watts gauge
realtek_poe_port_consumption_watts{device="lan1"} 0
realtek_poe_port_consumption_watts{device="lan2"} 0
[...]
# HELP realtek_poe_port_state per port poe state
# TYPE realtek_poe_port_state gauge
realtek_poe_port_state{device="lan1",state="Disabled"} 0
realtek_poe_port_state{device="lan1",state="Searching"} 1
[...]
(states: Disabled, Searching, Delivering power, Fault, Other fault, Requesting power)
# HELP realtek_poe_port_mode per port poe mode
# TYPE realtek_poe_port_mode gauge
realtek_poe_port_mode{device="lan1",mode="PoE"} 0
realtek_poe_port_mode{device="lan1",mode="PoE+"} 1
[...]
(modes: PoE, Legacy, pre-PoE+, PoE+)
Signed-off-by: Gregor Michels <hirnpfirsich@brainpeach.de>
Allow connection via a proxy server (required on some sites where
direct outbound HTTP(S) access is not permitted).
Signed-off-by: Michael Brown <mbrown@fensystems.co.uk>
- libgnutls: Fixed double free during verification of pkcs7 signatures.
Reported by Jaak Ristioja (#1383). [GNUTLS-SA-2022-07-07, CVSS: medium]
[CVE-2022-2509]
- libgnutls: gnutls_hkdf_expand now only accepts LENGTH argument less than or
equal to 255 times hash digest size, to comply with RFC 5869 2.3.
- libgnutls: Length limit for TLS PSK usernames has been increased
from 128 to 65535 characters (#1323).
- libgnutls: AES-GCM encryption function now limits plaintext
length to 2^39-256 bits, according to SP800-38D 5.2.1.1.
- libgnutls: New block cipher functions have been added to transparently
handle padding. gnutls_cipher_encrypt3 and gnutls_cipher_decrypt3 can be
used in combination of GNUTLS_CIPHER_PADDING_PKCS7 flag to automatically
add/remove padding if the length of the original plaintext is not a multiple
of the block size.
- libgnutls: New function for manual FIPS self-testing.
API and ABI modifications:
- gnutls_fips140_run_self_tests: New function
- gnutls_cipher_encrypt3: New function
- gnutls_cipher_decrypt3: New function
- gnutls_cipher_padding_flags_t: New enum
Signed-off-by: Nick Hainke <vincent@systemli.org>
makes LuaJit builds for mpc85xx targets with SPE ISA extension
enabled possible
Quoting inner commit message:
This allows building LuaJit for systems with Power ISA SPE
extension[^1] support by using soft float on LuaJit side.
While e500 CPU cores support SPE instruction set extension
allowing them to perform floating point arithmetic natively,
this isn't required. They can function with software floating
point to integer arithmetic translation as well,
just like FPU-less PowerPC CPUs without SPE support.
Therefore I see no need to prevent them from running LuaJit
explicitly.
[^1]: https://www.nxp.com/docs/en/reference-manual/SPEPEM.pdf
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
The realtek-poe package is used to configure the Power-over-Ethernet
controller found on Realtex 838x based switches. On many such
switches, the PoE doesn't work without this package.
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
- add package apinger-rrd for RRD graphs
- add RPC to get an overview and update graphs
- fix interface hotplug to restart apinger instance
- add patch to split alarms list in the status
Signed-off-by: Jaymin Patel <jem.patel@gmail.com>
The domoticz init script didn't properly read the "disabled"
configuration parameter and instead the service was always started.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
hfsprogs uses libbsd for strlcpy(), but the strlcpy() calls are inside
`#ifdef` and don't show up on the OpenWRT package.
Signed-off-by: Guilherme Janczak <guilherme.janczak@yandex.com>
