Community maintained packages for difos.
exposes PoE metrics obtained from realtek-poe # HELP realtek_poe_switch_info information about the poe controller # TYPE realtek_poe_switch_info gauge realtek_poe_switch_info{mcu="ST Micro ST32F100 Microcontroller",firmware="v22.4"} 1 # HELP realtek_poe_switch_budget_watts overall power budget # TYPE realtek_poe_switch_budget_watts gauge realtek_poe_switch_budget_watts 77 # HELP realtek_poe_switch_consumption_watts overall power consumption # TYPE realtek_poe_switch_consumption_watts gauge realtek_poe_switch_consumption_watts 5 # HELP realtek_poe_port_priority poe priority of port # TYPE realtek_poe_port_priority gauge realtek_poe_port_priority{device="lan1"} 1 realtek_poe_port_priority{device="lan2"} 1 [...] # HELP realtek_poe_port_consumption_watts per port power consumption # TYPE realtek_poe_port_consumption_watts gauge realtek_poe_port_consumption_watts{device="lan1"} 0 realtek_poe_port_consumption_watts{device="lan2"} 0 [...] # HELP realtek_poe_port_state per port poe state # TYPE realtek_poe_port_state gauge realtek_poe_port_state{device="lan1",state="Disabled"} 0 realtek_poe_port_state{device="lan1",state="Searching"} 1 [...] (states: Disabled, Searching, Delivering power, Fault, Other fault, Requesting power) # HELP realtek_poe_port_mode per port poe mode # TYPE realtek_poe_port_mode gauge realtek_poe_port_mode{device="lan1",mode="PoE"} 0 realtek_poe_port_mode{device="lan1",mode="PoE+"} 1 [...] (modes: PoE, Legacy, pre-PoE+, PoE+) Signed-off-by: Gregor Michels <hirnpfirsich@brainpeach.de> |
||
---|---|---|
.circleci | ||
.github | ||
.keys | ||
admin | ||
devel | ||
fonts/dejavu-fonts-ttf | ||
ipv6 | ||
kernel | ||
lang | ||
libs | ||
multimedia | ||
net | ||
sound | ||
utils | ||
CONTRIBUTING.md | ||
LICENSE | ||
README.md |
OpenWrt packages feed
Description
This is the OpenWrt "packages"-feed containing community-maintained build scripts, options and patches for applications, modules and libraries used within OpenWrt.
Installation of pre-built packages is handled directly by the opkg utility within your running OpenWrt system or by using the OpenWrt SDK on a build system.
Usage
This repository is intended to be layered on-top of an OpenWrt buildroot. If you do not have an OpenWrt buildroot installed, see the documentation at: OpenWrt Buildroot – Installation on the OpenWrt support site.
This feed is enabled by default. To install all its package definitions, run:
./scripts/feeds update packages
./scripts/feeds install -a -p packages
License
See LICENSE file.
Package Guidelines
See CONTRIBUTING.md file.