This also requires updating our patch for fortify-ing.
We now also pass the version as define during compilation.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
In the OpenWrt routing feed, package bmx6 and luci-app-bmx6 were removed because the LuCI app was vulnerable to several CVEs, as found by dependabot. It has been reporting it for a few months and has even created an issue. These two packages are not maintained in OpenWrt as well in upstream.
Users should switch to the bmx7 package.
Fixes: 9fb9d9343ea27d6dbb5008ece10c0c843dd2c781 ("bmx6: drop package") in the routing feed
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
changelog 1.9.2:
- cgroup: reset the inherited cpu affinity after moving to cgroup. Old kernels do that automatically, but new kernels remember the affinity that was set before the cgroup move, so we need to reset it in order to honor the cpuset configuration.
changelog 1.9.1:
- utils: ignore ENOTSUP when chmod a symlink. It fixes a problem on Linux 6.6 that always refuses chmod on a symlink.
- build: fix build on CentOS 7
- linux: add new fallback when mount fails with EBUSY, so that there is not an additional tmpfs mount if not needed.
- utils: improve error message when a directory cannot be created as a component of the path is already existing as a non directory.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
v1.2.2 changes:
- Enabled reproducible builds
v1.2.1 changes:
- sandbox: Add support for escaping resolv.conf symlinks. This fixes usage in WSL environments which symlinks /etc/resolv.conf under a shared location under /mnt.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
We currently have more package architectures supporting
CPU frequency scaling than earlier, and the package architecture
vs. CPU target SDK matching does not fully reflect that.
(E.g. aarch64_cortex-a53 is currently using bcm27xx/bcm2710)
Simplify things by removing the target dependency and let the plugin
be built for all architectures.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
build hosts with busybox fail with long options on rm
command. Short versions are supported by all, so this
makes it script compatible with busybox hosts as well.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
podman still seems to use catatonit with
rootless containers. It seems that it is
possible to use alternatives, such as tini,
but maybe go the same way they went on mainstream.
This PR just adds catatonit to depends.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
patch refreshed.
Changelog:
- Fixed a performance issue when calculating diff sizes in overlay. The podman system df command should see a significant performance improvement.
- Fixed a bug where containers in a pod would use the pod restart policy over the set container restart policy.
- Fixed a bug in the Compat Build endpoint where the pull query parameter did not parse 0/1 as a boolean.
- Updated the containers/storage library to v1.48.1
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Changes:
- support arbitrary idmapped mounts. Now it is possible to specify a mapping for any type of mount, not only bind mounts.
- add support for "ridmap" mount option to support recursive idmapped mounts.
- fix check for oom_score_adj. Write the oom_score_adj file even when the new value is 0.
- features: Support mountExtensions.
- correctly handle unknown signal string when it doesn't start with a digit.
- do not attempt to join again already joined namespace.
- wasmer: use latest wasix API.
- refresh libocispec
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Since it seems that this nobody wants to be the maintainer of dbus,
I can take the responsibility.
I am no dbus expert, but can runtime test it and see if change seems
sane.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Current stable branch for dbus is 1.14 and that is recommended to be used.
1.13 was a development branch and not meant for production use.
1.14.10 is the latest stable, so lets move to it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
CMake is not being used to build dbus as it does not respect endinaness
under CMake and 1.14 branch.
So, lets drop the patches as they will not apply to future 1.14 update.
Signed-off-by: Robert Marko <robimarko@gmail.com>
This fix dnsmasq failing to startup once configured since the
cache-domains config files are not included in the jail that dnsmasq
runs inside.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
Since February 2023, I decided to no longer work with Turris, I mean CZ.NIC company
due to some reasons how the development goes and since that day my work address is not
available and not sure if there is some redirect to someone else, but if anyone wants to
reach me, use my email address, where they can find me.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Both of us were working for Turris and using these devices on daily basis.
A few of these packages are still required and used by Turris. It would be great if
Turris people will take maintainership of these packages, but if they decide not to,
I can step in and take them.
Since Karel switched from using OpenWrt to NixOS and hopefully, I didn't reveal some
secret here, let's take maintainership of his packages.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
It seems that the Makefile has both CC and CFLAGS hardcoded and does not
allow overriding them by ones being passed by the buildsystem.
This works fine until CONFIG_PKG_ASLR_PIE_ALL is selected, then building
will fail with:
arm-openwrt-linux-muslgnueabi/bin/ld.bfd: mhz.o: relocation R_ARM_MOVW_ABS_NC against `a local symbol' can not be used when making a shared object; recompile with -fPIC
arm-openwrt-linux-muslgnueabi/bin/ld.bfd: mhz.o(.text+0x75c): unresolvable R_ARM_CALL relocation against symbol `__aeabi_l2d@@GCC_3.5
So, lets add a patch pending upstream that allows both CC and CFLAGS to be
overriden so that ones passed by the buildsystem are actually respected.
Fixes: 89123b308f ("mhz: add new package")
Signed-off-by: Robert Marko <robimarko@gmail.com>
The rpcd wireguard plugin provides essential functions similar to the `wg`
tool.
It uses the embeddable-wg-library [0], which describes itself as:
"This is a mini single-file library, meant to be embedded directly into the
source code of your program. Copy wireguard.c and wireguard.h into your
project. They should build with any C89 compiler. There are no dependencies
except libc"
The plugin does exactly that and therefor inherits the LGPL license.
At this point it provides the following functions:
'wireguard'
"status":{}
"genkey":{}
"genpsk":{}
"pubkey":{"private":"String"}
Examples:
$ ubus call wireguard status
{
"wg0": {
"ifindex": 12,
"public_key": "<base64 encoded public key>",
"listen_port": 1234,
"peers": {
"<base64 encoded public peer key>": {
"allowed_ips": [
"192.168.1.123/32"
],
"last_handshake": 0,
"rx_bytes": 0,
"tx_bytes": 0
},
"<another base64 encoded public peer key>": {
"endpoint": "<ip:port>",
"allowed_ips": [
"192.168.1.124/32"
],
"last_handshake": 1676287619,
"rx_bytes": 8731604,
"tx_bytes": 88333652
}
}
}
}
$ ubus call wireguard genpsk
{
"preshared": "EKQJ3XI/6xLoifAoGb5bNA39De1tiwZ3x7h8OS2zKkE="
}
$ ubus call wireguard genkey
{
"private": "IFyGkfXlO+WO8DMO3cqhaDZ8rBfioP5pVnAoQlEpXnI=",
"public": "uF2O6/ZXZjKnUnxBnldElBYIXfpyvvtUnZfKP+BSBSI="
}
$ ubus call wireguard pubkey '{"private":"IFyGkfXlO+WO8DMO3cqhaDZ8rBfioP5pVnAoQlEpXnI="}'
{
"public": "uF2O6/ZXZjKnUnxBnldElBYIXfpyvvtUnZfKP+BSBSI="
}
Size comparison:
52436 /usr/bin/wg
18544 /usr/lib/rpcd/wireguard.so
[0] https://git.zx2c4.com/wireguard-tools/tree/contrib/embeddable-wg-library
Signed-off-by: Andre Heider <a.heider@gmail.com>
As of OpenWrt main branch commit e505873e65f72 ("armsr: armv8:
enable KVM host") [merged 2023-08-15], armsr/armv8 has
KVM host support. We can now enable QEMU host for this
target.
For example, you can run OpenWrt armsr/armv8 as a guest
like so:
qemu-system-aarch64 -nographic -M virt -cpu host --enable-kvm \
-bios u-boot.bin -smp 1 -m 1024 \
-drive file=openwrt-armsr-armv8-generic-ext4-combined.img,format=raw,index=0,media=disk
A compatible u-boot.bin can be obtained from u-boot-qemu_armv8/u-boot.bin
that is built with the armsr target and available from
downloads.openwrt.org.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
* 0.10.0 (Jun 04, 2023)
- Add arm7 and aarch64 support for FreeBSD
* 0.9.0 (Jun 12, 2022)
- Add RISCV64 support on Linux
- Fix tty-stealing on PowerPC
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Fix missing dependencies for 'collectd-mod-disk' to 'libudev' if
collectd-mod-smart is not enabled.
Package collectd-mod-disk is missing dependencies for the following
libraries:
libudev.so.1
The package 'collect-mod-disk' is now build always with 'libudev' support,
independent of the enable/disable build state of 'collectd-mod-smart'.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The package is terribly outdated and bundling it with the web UI is a
task I don't find myself willing to take. Dropping it.
FIX: #16008
Signed-off-by: Paul Spooren <paul.spooren@rhebo.com>
Fixed by defining TARGET=linux, as suggested in the README.
By default TARGET is derived from the host using uname -s,
which produces build errors on a non-linux hosts:
TARGET is not set; trying to determine target based on host OS....
Detected OS is Darwin
Build target is macos
...
x86_64-openwrt-linux-musl-g++: error: unrecognized command-line option '-arch'
Helped-by: Tianling Shen <cnsztl@immortalwrt.org>
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Notably, the meson args for programmers changed from a series of
individual 'config_$foo>, config_$bar' to a list of
'programmer=$foo,$bar'
The patches were all either already merged upstream (or similar ones, at
least), or aren't useful (bitbang_spi is no longer a separated
programmer; it's included in the defaults).
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cryptsetup 2.6.1 Release Notes
==============================
Stable bug-fix release with minor extensions.
All users of cryptsetup 2.6.0 should upgrade to this version.
Changes since version 2.6.0
~~~~~~~~~~~~~~~~~~~~~~~~~~~
* bitlk: Fixes for BitLocker-compatible on-disk metadata parser
(found by new cryptsetup OSS-Fuzz fuzzers).
- Fix a possible memory leak if the metadata contains more than
one description field.
- Harden parsing of metadata entries for key and description entries.
- Fix broken metadata parsing that can cause a crash or out of memory.
* Fix possible iteration overflow in OpenSSL2 PBKDF2 crypto backend.
OpenSSL2 uses a signed integer for PBKDF2 iteration count.
As cryptsetup uses an unsigned value, this can lead to overflow and
a decrease in the actual iteration count.
This situation can happen only if the user specifies
--pbkdf-force-iterations option.
OpenSSL3 (and other supported crypto backends) are not affected.
* Fix compilation for new ISO C standards (gcc with -std=c11 and higher).
* fvault2: Fix compilation with very old uuid.h.
* verity: Fix possible hash offset setting overflow.
* bitlk: Fix use of startup BEK key on big-endian platforms.
* Fix compilation with latest musl library.
Recent musl no longer implements lseek64() in some configurations.
Use lseek() as 64-bit offset is mandatory for cryptsetup.
* Do not initiate encryption (reencryption command) when the header and
data devices are the same.
If data device reduction is not requsted, this leads to data corruption
since LUKS metadata was written over the data device.
* Fix possible memory leak if crypt_load() fails.
* Always use passphrases with a minimal 8 chars length for benchmarking.
Some enterprise distributions decided to set an unconditional check
for PBKDF2 password length when running in FIPS mode.
This questionable change led to unexpected failures during LUKS format
and keyslot operations, where short passwords were used for
benchmarking PBKDF2 speed.
PBKDF2 benchmark calculations should not be affected by this change.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Remove downstream patch 004-missing-includes.patch which was merged
upstream in version 2.03.19
LVM2 changelog since version 2.03.17
version 2.03.22 - 02nd August 2023
==================================
Fix pv_major/pv_minor report field types so they are integers, not strings.
Add lvmdevices --delnotfound to delete entries for missing devices.
Always use cachepool name for metadata backup LV for lvconvert --repair.
Make metadata backup LVs read-only after pool's lvconvert --repair.
Improve VDO and Thin support with lvmlockd.
Handle 'lvextend --usepolicies' for pools for all activation variants.
Fix memleak in vgchange autoactivation setup.
Update py-compile building script.
Support conversion from thick to fully provisioned thin LV.
Cache/Thin-pool can use error and zero volumes for testing.
Individual thin volume can be cached, but cannot take snapshot.
Better internal support for handling error and zero target (for testing).
Resize COW above trimmed maximal size is does not return error.
Support parsing of vdo geometry format version 4.
Add lvm.conf thin_restore and cache_restore settings.
Handle multiple mounts while resizing volume with a FS.
Handle leading/trailing spaces in sys_wwid and sys_serial used by deivce_id.
Enhance lvm_import_vdo and use snapshot when converting VDO volume.
Fix parsing of VDO metadata.
Fix failing -S|--select for non-reporting cmds if using LV info/status fields.
Allow snapshots of raid+integrity LV.
Fix multisegment RAID1 allocator to prevent using single disk for more legs.
version 2.03.21 - 21st April 2023
=================================
Fix activation of vdo-pool for with 0 length headers (converted pools).
Avoid printing internal init messages when creation integration devices.
Allow (write)cache over raid+integrity LV.
version 2.03.20 - 21st March 2023
=================================
Fix segfault if using -S|--select with log/report_command_log=1 setting.
Configure now fails when requested lvmlockd dependencies are missing.
Add some configure Gentoo enhancements for static builds.
version 2.03.19 - 21st February 2023
====================================
Configure supports --with-systemd-run executed from udev rules.
Enhancement for build with MuslC systemd and non-bash system shells (dash).
Do not reset SYSTEMD_READY variable in udev for PVs on MD and loop devices.
Ensure udev is processing origin LV before its thick snapshots LVs.
Fix and improve runtime memory size detection for VDO volumes.
version 2.03.18 - 22nd December 2022
====================================
Fix issues reported by coverity scan.
Fix warning for thin pool overprovisioning on lvextend (2.03.17).
Add support for writecache metadata_only and pause_writeback settings.
Fix missing error messages in lvmdbusd.
DM changelog since version 1.02.187:
Version 1.02.196 - 02nd August 2023
===================================
Version 1.02.195 - 21st April 2023
==================================
Version 1.02.193 - 21st March 2023
==================================
Version 1.02.191 - 21st February 2023
=====================================
Improve parallel creation of /dev/mapper/control device node.
Import previous ID_FS_* udev records in 13-dm-disk.rules for suspended DM dev.
Remove NAME="mapper/control" rule from 10-dm.rules to avoid udev warnings.
Version 1.02.189 - 22nd December 2022
=====================================
Improve 'dmsetup create' without given table line with new kernels.
(Version 1.02.188 is missing)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
If 'collectd-mod-smart' is not enabled, the use of lubudev does not need
to be explicitly disabled. This library could be a dependency for other
modules in the future. If this is explicitly disabled, then the other
module cannot be built.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
mqtt plugin is already built and shipped in
collectd-mod-mqtt, however it is not possible to configure it via
uci currently, instead having to rely on populating the config file manually.
Add support by adding 2 functions, process_mqtt() and
process_mqtt_block(). First one just enables/disables the plugin.
The second one, in the spirit of the curl plugin, adds support for
populating multiple <Publish> and <Subscribe> blocks under <Plugin mqtt>
with support for some parameters. Those are:
* blocktype. Publish or Subscribe. Mandatory
* name. The name of the block. Mandatory
* Host. Mandatory
* Port. Optional
* User. Optional
* Password. Optional
* ClientId. Optional
* QoS. Optional
* Prefix. Optional
* Retain. Optional
* StoreRates. Optional
* CleanSession. Optional
* Topic. Optional
Bump PKG_RELEASE per comments in PR
Signed-off-by: Alexandros Kosiaris <akosiaris@gmail.com>
Commit 0c10c224be only handles the case where AUTORELEASE is used in
PKG_RELEASE thus this package was left behind. Let's fix this up.
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
Commit 4bb18b04 added _GNU_SOURCE to jq's Makefile to fix a segfault.
This has since been fixed upstream, so this commit backports the upstream
patch instead. This keeps things closer to upstream, and it will prevent
the Makefile from containing a redundant fix once upstream releases the
next version.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Merged patches into a single one.
Disabling libmpfr (which got added recently).
To avoid potentially new build failures.
And disabling test-compiler check.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
* Add separate packages for each tool (semodule-*)
* Update the semodule-utils package as a meta-package that installs all
tools, keeping it functionally the same as the current semodule-utils
package
* Remove host build (not used by any other package)
* Update package titles, descriptions, and license files
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* Added packages:
* python3-seobject
Contains the seobject.py library file which was previously included
in selinux-semanage
* selinux-sepolicy
Contains the sepolicy and sepolgen tools which were previously
included in python3-sepolicy
* selinux-sepolgen-ifgen
Contains the sepolgen-ifgen tool which was previously included in
selinux-audit2allow
* selinux-python
A meta-package to install all tools
* Change the python3-sepolgen data_dir from /usr/share/sepolgen to
/etc/sepolgen (updated 0001-sepolgen-adjust-data_dir.patch), and add
the directory to conffiles
By default, the sepolgen-ifgen tool writes to a file named
"interface_info" in the data directory, to be read by the audit2allow
tool. The header comment in the perm_map file also suggests that the
file is customizable.
The best place for these files would be in /var/lib, but /etc is more
appropriate than /usr.
* Remove gui files from python3-sepolicy (0003-sepolicy-no-gui.patch)
* Fix ModuleNotFoundError raised by sepolicy
(0004-sepolicy-fix-get_os_version-except.patch)
Patch has been submitted upstream:
https://lore.kernel.org/selinux/20230619063217.3165462-1-jeffery.to@gmail.com/
* Update package titles, descriptions, and dependencies
* Use Py3Package to build Python bytecode and source packages
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* Rename:
* Source package from python3-libsemanage to python-semanage
* Target package from python3-libsemanage to python3-semanage
* Update dependents with new target package name
* Update package title, license files, and dependencies
* Remove Build/InstallDev (files not used by any other package)
* Use Py3Package to build Python bytecode and source packages
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* Rename:
* Source package from python3-libselinux to python-selinux
* Target package from python3-libselinux to python3-selinux
* Update dependents with new target package name
* Remove patches:
* 010-setup-py-custom-cc.patch: LDSHARED is already set as part of
$(PYTHON3_VARS)
* 020-Make-use-of-variables-when-defining-libdir-and-inclu.patch: This
package doesn't install the libselinux.pc file
* Update package title and dependencies
* Remove Build/InstallDev (files not used by any other package)
* Use Py3Package to build Python bytecode and source packages
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* Add separate packages for each tool (setools-*) and a package for the
Python bindings (python3-setools)
* Update the setools package as a meta-package that installs all tools,
keeping it functionally the same as the current setools package
* Remove gui tool (apol) and Python binding (setoolsgui)
* Simplify 030-remove-host-paths.patch (libraries installed by
Build/InstallDev are placed in $(STAGING_DIR)/usr/lib only)
* Update package titles, descriptions, license, and dependencies
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
arp-whisper listens to ARP requests on a network interface and responds
to them based on a list of IP-MAC address mappings defined in a
configuration file
Signed-off-by: Facundo Acevedo <facevedo@disroot.org>
The 'ipq807x' target was renamed to be 'qualcommax' (and ipq807x was
set as subtarget). Adjust plugin target dependencies to this renaming.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
mhz is a tool for mathematically calculating the current CPU frequency, it
has proven to be a really good help while developing CPU frequency scaling
solutions as it allows to independently prove that scaling actually works.
Now that the author has added a license we can package it for the all to
use.
Signed-off-by: Robert Marko <robimarko@gmail.com>
armvirt target has been renamed to armsr (Arm SystemReady) [1],
so the dependency need to be changed as well.
40b02a2301
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
armvirt target has been renamed to armsr (Arm SystemReady) [1],
so the dependency need to be changed as well.
1. 40b02a2301
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Automatically compute and substitute current values for all
$(COMMITCOUNT) instances as this feature is deprecated and shouldn't be
used.
Based on commit 0c10c224be:
Change COMMITCOUNT in rules.mk to:
```
COMMITCOUNT = $(if $(DUMP),0,$(shell sed -i "s/\$$(COMMITCOUNT)/$(call commitcount)/" $(CURDIR)/Makefile))
```
then update all affected packages by:
```
for i in $(git -C feeds/packages grep -l COMMITCOUNT | sed 's^.*/\([^/]*\)/Makefile^\1^';);
do
make package/$i/clean
done
```
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
Release Information:
https://gitlab.com/gpsd/gpsd/-/blob/release-3.25/NEWS?ref_type=tags
Remove the backport that is now contained in the release:
- 003_sconscript-cross-platform-build-support.patch
Latest olsrd version needs this bump.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Lot's of changes, but no online release notes
available, check ChangeLog file once extracted
if necessary
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Moved to from git to release version,
but release version does not have submodule
libocispec included, so additional download added.
Release notes: https://github.com/containers/crun/releases
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Disable mpfr detection to fix a build error due to (unncessary)
missing dependency:
```
Package gawk is missing dependencies for the following libraries:
libgmp.so.10
libmpfr.so.6
```
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
when built with gcc 13, fixes following error:
capability.h:46:6: error: variable or field '__debug_capabilities' declared void
46 | void __debug_capabilities(uint64_t capset, const char *name);
| ^~~~~~~~~~~~~~~~~~~~
capability.h:46:27: error: 'uint64_t' was not declared in this scope
patch is back ported from upstream patch at
64a64be7ff.patch
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
lang/python is meant for Python libraries and other packages closely
related to the Python language. It makes more sense for borgbackup to be
in utils instead.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* Added new dependencies introduced in this version
* Disabled mips16 due to build issues
* Fixed the usage of the `CONFIG_USE_MUSL` variable (missing $)
* Refreshed patches
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
also fixes linking issue that appeared after gcc 13
removed obsolete (merged) patch, ttyd now depends on
libcap, added that as a dependency.
remaining patch refreshed.
release notes: https://github.com/tsl0922/ttyd/releases
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Just selecting this package resulted in a build error:
/home/mhei/openwrt.git/staging_dir/hostpkg/bin/python3: No module named asciidoc
make[4]: *** [Makefile:856: evtest.xml] Error 1
Since we usually do not need the man page, just prevent to
build it by pre-setting two environments variables. Then
the makefile warns about, but don't try to build.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.
Manually pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.
Manually pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Fixes errors in the form of:
inotifytools.c: In function 'inotifytools_watch_recursively_with_exclude':
inotifytools.c:1335:30: error: storage size of 'my_stat' isn't known
1335 | static struct stat64 my_stat;
| ^~~~~~~
inotifytools.c:1342:36: error: implicit declaration of function 'lstat64'; did you mean 'lstat'? [-Werror=implicit-function-declaration]
1342 | if ( -1 == lstat64( next_file, &my_stat ) ) {
| ^~~~~~~
| lstat
inotifytools.c:1335:30: error: unused variable 'my_stat' [-Werror=unused-variable]
1335 | static struct stat64 my_stat;
| ^~~~~~~
inotifytools.c: In function 'isdir':
inotifytools.c:1621:30: error: storage size of 'my_stat' isn't known
1621 | static struct stat64 my_stat;
| ^~~~~~~
inotifytools.c:1621:30: error: unused variable 'my_stat' [-Werror=unused-variable]
inotifytools.c:1630:1: error: control reaches end of non-void function [-Werror=return-type]
1630 | }
| ^
cc1: all warnings being treated as errors
Signed-off-by: Nick Hainke <vincent@systemli.org>
This package seems to be missing an InstallDev section. Had a compile
failure for an application that needs to compile against liboath
Signed-off-by: Thlv Alivs <zgmzzzz18@gmail.com>
Similar to mdadm also cryptsetup now requires _LARGEFILE64_SOURCE.
Add -D_LARGEFILE64_SOURCE to TARGET_CFLAGS to fix compilation.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.
Manually pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.
Backport an upstream fix to replace these old functions.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Module called the exit module function "exit", This conflicts with the
stdlib header that use exit() to exit userspace program.
Correctly assign a namespace to these functions. (init and exit)
Fix compilation warning:
warning: the compiler differs from the one used to build the kernel
The kernel was built by: aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.2.0 r21757+608-895f38ca1e) 12.2.0
You are using: aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.2.0 r21757+1091-895f38ca1e) 12.2.0
CC [M] /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/gl-mifi-mcu-1/module.o
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/gl-mifi-mcu-1/module.c:196:20: error: conflicting types for built-in function 'exit'; expected 'void(int)' [-Werror=builtin-declaration-mismatch]
196 | static void __exit exit(void)
| ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/gl-mifi-mcu-1/module.c:9:1: note: 'exit' is declared in header '<stdlib.h>'
8 | #include <linux/version.h>
+++ |+#include <stdlib.h>
9 |
cc1: all warnings being treated as errors
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
- added btrfs-tools as a build depency
- switch from cni networking to recommended new standard, netavark.
- drop iptables config option (netavark handles that now)
- patch refreshed
List of changes: https://github.com/containers/podman/releases
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
The default runtime directory used by LXC is /run which doesn't exist
in OpenWrt. It causes errors like:
Failed to create lock for foo
lxc-create: foo: tools/lxc_create.c: main: 260 Failed to create lxc container
There has been workaround for that in the lxc-auto.init but it requires
installing "lxc-auto" package. Replacing that "ln -s" workaround with
Makefile specifying RUNTIME_PATH define allows using pure "lxc" in
OpenWrt (without the "lxc-auto").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
