Ensure that hapd->own_addr is set properly, since hostapd_setup_bss
only handles it for secondary BSS interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add new and remove obsolete symbols for Kernel 6.12
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/18975
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/18975
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The patch of kernel 6.12 missing cpufreq part for
mt7988d, causing the ccifreq driver probe to fail.
Add it to avoid mt7988d devices boot hang.
Fixes: a9822e8 ("kernel/mediatek: 6.12: drop patches which have been applied upstream")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
These kernel config symbols are selected by all sub-targets. We
can merge them together to simplify the config files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18632
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
All kernel config symbols are refreshed by `make kernel_oldconfig`.
Some symbols are moved to the generic/config-6.12 because the
refresh tool will automatically trim them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18632
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update to the latest version.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Change deprecated function strlcpy to strscpy
for compatibility with kernel 6.12.
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since DEV_ASSIGN is only used by
TRACE macros and the return values are ignored.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18927
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The SMP environment is prepared well for the RTL93X. Now describe the
power cluster controller in the DTS. Tested on RTL9311 based Linksys
LGS352C.
Without patch:
root@OpenWrt:~# dmesg | grep CPU
[ 0.140425] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.191952] Synchronize counters for CPU 1: done.
[ 1.232191] CPU2: failed to start
[ 1.237863] No online CPU in core 1 to start CPU3
[ 2.273784] CPU3: failed to start
[ 2.277589] smp: Brought up 1 node, 2 CPUs
root@OpenWrt:~# cat /proc/cpuinfo | grep -E "model|proc"
processor : 0
cpu model : MIPS interAptiv (multi) V2.0
processor : 1
cpu model : MIPS interAptiv (multi) V2.0
With patch:
root@OpenWrt:~# dmesg | grep CPU
[ 0.000000] CPU0 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Failed to get CPU clock: -2
[ 0.000000] CPU frequency from device tree: 1000MHz
[ 0.133360] smp: Bringing up secondary CPUs ...
[ 0.140418] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.191950] Synchronize counters for CPU 1: done.
[ 0.230103] CPU2 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.289220] Synchronize counters for CPU 2: done.
[ 0.326189] CPU3 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.378861] Synchronize counters for CPU 3: done.
[ 0.413829] smp: Brought up 1 node, 4 CPUs
processor : 0
cpu model : MIPS interAptiv (multi) V2.0
processor : 1
cpu model : MIPS interAptiv (multi) V2.0
processor : 2
cpu model : MIPS interAptiv (multi) V2.0
processor : 3
cpu model : MIPS interAptiv (multi) V2.0
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19110
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduced with Linux 6.7, in commit:
5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result"),
when a parser returns an error, this will be passed up, and
consequently, all parent mtd partitions get torn down.
Adjust the mtdsplit_uimage driver to only return an error if there is a
critical problem in reading from the mtd device or allocating memory.
Otherwise return 0 to indicate that no partitions were found.
Also add logging to indicate what went wrong.
E.g. on Realtek devices that are booted for the first time through
initramfs with OpenWrt never installed before boot log will show
[ 0.975518] Creating 7 MTD partitions on "spi0.0":
[ 0.981062] 0x000000000000-0x0000000e0000 : "u-boot"
[ 1.041320] 0x0000000e0000-0x0000000f0000 : "u-boot-env"
[ 1.060683] 0x0000000f0000-0x000000100000 : "u-boot-env2"
[ 1.080992] 0x000000100000-0x000000200000 : "jffs2-cfg"
[ 1.100988] 0x000000200000-0x000000300000 : "jffs2-log"
[ 1.120599] 0x000000300000-0x000000fe0000 : "firmware"
[ 1.157426] mtdsplit_uimage: no rootfs after uImage in "firmware"
[ 1.176456] mtdsplit_uimage: no rootfs after uImage in "firmware"
[ 1.200262] 0x000000fe0000-0x000001000000 : "log"
Similar issues were fixed before with commit ade045084b
("kernel: mtdsplit_minor: return 0 if not fatal") and
c78765213e ("kernel: mtdsplit_uimage: return 0 if not fatal")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19163
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Due to a bug, USB is not powered on after boot on hAP ac.
This prevents extroot configurations from working as overlayfs is mounted
before USB device can be powered on. This commit fixes this by enabling USB
in devicetree.
Related discussion links:
- https://forum.openwrt.org/t/usb-power-is-off-on-boot/229007
---
Extroot configuration requires the USB to be powered on before
preinit_main/80_mount_root. Probably the simplest approach is to enable
it in the devicetree. Another approach would be to add a script into
/lib/preinit that will power on USB via /sys/class/gpio/usb-power/value
E.g.
cat /lib/preinit/79_power_on_usb
do_power_on_usb(){
echo '1' > /sys/class/gpio/usb-power/value
}
boot_hook_add preinit_main do_power_on_usb
Signed-off-by: Valeriy Manzhos <manzhos.va@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19149
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
JDCloud RE-SP-01B is a dual-band WiFi 5 router based on the MT7621AT.
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 512MB DDR3
- Flash: 32MB SPI NOR
- WiFi: MediaTek MT7603EN (2.4GHz), MediaTek MT7615N (5GHz)
- Ethernet: 1x WAN, 2x LAN (Gigabit Ethernet)
- LEDs: red, blue, green (GPIO controlled)
- Button: Reset (GPIO controlled)
- eMMC: Single onboard (32GB/64GB/128GB)
- USB: 1x USB 2.0 port
MAC Address Structure:
The MAC addresses share the structure DC:D8:7C:XX:XX:XX, where:
- WAN, LAN, and 2.4GHz WiFi: same as the label MAC address.
- 5GHz WiFi: label MAC address + 0x800000.
The manufacturer writes the label MAC address at different
offsets depending on the storage version of the device:
e.g.
128GB version: &config + 0x442a
64GB version: &config + 0x4429
So `get_mac_ascii()` is used here to search for the
base label MAC address of the device.
Ref:
https://github.com/openwrt/openwrt/pull/17409#discussion_r1899674262https://github.com/immortalwrt/immortalwrt/commit/c0c480d
Flash Instruction:
A 3rd party bootloader is required to boot the image. You can
use a SOP16 test clip to burn the image/bootloader to the flash.
The official bootloader does provide a web recovery interface
which only accepts an official image. To access it, you will
need to hold the reset button and power on the device, set your
IP address to 192.168.68.2 and visit http://192.168.68.1.
Co-authored-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Yijie Jin <jinyijie@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17409
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The switchcore node is the central location that describes the Realtek switch
register addresses starting at 0x1b000000. It will be used by current and
future regmap enabled device drivers. The upstream MDIO driver already makes
use of it by calling syscon_node_to_regmap(dev->parent->of_node);
In the current DTS base we have 3 issues that should be fixed:
- rtl838x.dtsi has a length of 0x20000 instead of 0x10000
- rtl839x.dtsi has a length of 0x20000 instead of 0x10000
- rtl931x.dtsi has no switchcore node at all
Align these mismatches with the "good" RTL930x template.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18642
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The drivers for I2C bus and mux for RTL931x have an incorrectly defined
SDA0 pin number, causing an error with correct pin numbers specified in
the device tree.
Using the `show tech-support board` on the vendor firmware of a Netgear
MS510TXM shows the correct pin numbers but they don't work with the
drivers. So fix this.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19171
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport accepted BCM5325 patches from net-next.
These patches will be merged in the v6.17 kernel window.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Glibc since 2.41 tries to include linux/sched/types.h from sched.h, and
pointing KERNEL_INCLUDE to the kernel headers makes it use
linux/sched/types.h from the kernel headers instead of the installed
one.
This then breaks the configure (test) compile for setns() and the test:
mips-openwrt-linux-gnu-gcc -I/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi -o config.HaAJYe/setnstest config.HaAJYe/setnstest.c
In file included from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/sched/types.h:5,
from /fork.openwrt/staging_dir/toolchain-mips_24kc_gcc-14.3.0_glibc/include/bits/sched.h:63,
from /fork.openwrt/staging_dir/toolchain-mips_24kc_gcc-14.3.0_glibc/include/sched.h:43,
from config.HaAJYe/setnstest.c:2:
/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/types.h:10:2: warning: #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders" [-Wcpp]
10 | #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders"
| ^~~~~~~
In file included from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/posix_types.h:5,
from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/types.h:14:
/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/stddef.h:5:10: fatal error: linux/compiler_types.h: No such file or directory
5 | #include <linux/compiler_types.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Fix this by pointing KERNEL_INCLUDE to the toolchain headers, which
include the installed kernel headers.
Tested with musl, glibc, and SDK.
Fixes: 60738feded ("iproute2: Fix KERNEL_INCLUDE in SDK")
Reported-by: Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
From now on both SFP ports can be used without manual intervention.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18737
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently only RTL83xx devices are known with shared SCL pins.
So activate the driver only for those targets.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18737
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some Realtek switches have been designed with I2C busses that share a
single SCL line. The clock line is used for 2 or more busses. This cannot
be used with the standard i2c-gpio driver that relies on distinct SDA
and SCL pairs.
Provide a derived i2c-gpio-shared driver that can be used instead. This
driver can handle up to 4 busses with only a single clock line.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18737
Signed-off-by: Robert Marko <robimarko@gmail.com>
libs/slang2 is getting picked up from the packages feed, if the slang2
is compiled first and then if you try to compile perf, it fails
due to unmet dependency.
Fixes:
Package perf is missing dependencies for the following libraries:
libslang.so.2
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19123
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Specifications:
SoC: MediaTek MT7981B
RAM: 1024MiB
Flash: SPI-NAND 128 MiB
Switch: 1 WAN, 4 LAN (Gigabit)
USB: two M.2 slots for 5G modems via USB 3.0 hub, external USB 3.0 port
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7976CN
UART: 115200n8
UART Layout:
VCC-RX-TX-GND
Installation:
1. Power down the router and hold in the Reset button.
2. While holding in the button power up the router again.
3. Hold the button in for 10 seconds and then release.
4. Use your browser to go to 192.168.1.1
5. If you see a GUI that is for flashing firmware then you have the V2 model.
If there is no GUI and the router continues to boot up normally
you have the V1 model.
6. Now use the V2 sysugrade file.
Note: Recovery GUI it can be used to recover from an incorrect firmware flash.
Based on patches adding support for this device by Yannick Chabanois (openmptcprouter)
and Dairyman (ofmodemsandmen)
Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18514
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The High-Speed SD mode stability issue should have been fixed.
Increase the MMC max-frequency to improve the IO speed. We can
still use the sysfs to limit the clock frequency, e.g.
root@OpenWrt:~# echo 25000000 > /sys/kernel/debug/mmc0/clock
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18896
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This new feature has some improvements for random RW performance.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18896
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The MT7628 programing guide shows that the correct DTOC unit is
1048576 clocks instead of 65536 clocks. This value is also used
by linux upstream mtk-sd driver. Correct the DTOC register and
also round up its value.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18896
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Specification:
SoC: MediaTek MT7628NN
RAM: 128 MB, EtronTech EM68C16CWQG-25H (DDR2)
Flash: 32MB, Winbond 25Q256JVFQ (Dual Boot, SPI)
Switch: MediaTek MT7628AN, 4 ports 100 Mbps
WiFi: MediaTek MT7603 2T2R/2.4GHz 802.11n
GPIO: 2 buttons (Wi-Fi, Reset), 3 LEDs (Power, Internet, Wi-Fi), 1 mode switch
Disassembly:
At the bottom, under the LEDs, there are 2 screws hidden by rubber feet. After removing the screws, pry the gray plastic part around (it is secured with latches) and remove it.
Serial Interface:
The serial interface can be connected to the 5 pin dots located on the right between the operating mode switch and the antenna.
Pins (from antenna to operating mode switch):
VCC
TX
RX
NC
GND
Settings: 115200, 8N1
Flashing via OEM recovery software:
1. Download the OEM recovery software from the manufacturer's website
2. Download the firmware image (for OpenWRT it is *-squashfs-factory.bin), rename it to KN-1112_recovery.bin
3. Replace the file in the fw folder OEM recovery software with the file from step 2.
4. Run the OEM recovery software and follow the instructions.
Flashing via TFTP:
1. Connect your PC and router to port 1-3, configure PC interface using IP 192.168.1.2, mask 255.255.255.252
2. Serve the firmware image (for OpenWRT it is *-squashfs-factory.bin) renamed to KN-1112_recovery.bin via TFTP
3. Power up the router while pressing Reset button on the back
4. Release Restart button when Power LED starts blinking
To revert back to OEM firmware:
The return to the OEM firmware is carried out by using the methods described above with the help of the appropriate firmware image.
When using OEM bootloader, the firmware image size cannot exceed the size of one OEM «Firmware_x» partition or Kernel + rootFS size.
Signed-off-by: Anton Yu. Ivanusev <ivanusevanton@yandex.ru>
Link: https://github.com/openwrt/openwrt/pull/19091
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Zyxel XGS1210-12 Switch is a 10 + 2 port multi-GBit switch with
8 x 1000BaseT, 2 x 10/100/1000/2500BaseT Ethernet ports and
2 SFP+ module slot.
Hardware:
- RTL9302B SoC
- Macronix MX25L12833F (16MB flash)
- Nanja NT5CC64M16GP-1 (128MB DDR3 SDRAM)
- RTL8231 GPIO extender to control the port LEDs
- RTL8218D 8x Gigabit PHY
- RTL8226 2x 10m/100m/1/2.5 Gigabit PHY
- SFP+ 2x 10GBit slot
Power is supplied via a 12V 1.5A standard barrel connector. At the
right side behind the grid is UART serial connector. A Serial
header can be connected to from the outside of the switch trough
the airvents with a standard 2.54mm header.
Pins are from top to bottom Vcc(3.3V), TX, RX and GND. Serial
connection is via 115200 baud, 8N1.
A reset button is accessble through a hole in the front panel
At the time of this commit, all ethernet ports work under OpenWrt,
including the various NBaseT modes, SFP+ slots are supported with i2c bus.
Installation
--------------
* Connect serial as per the layout above. Connection parameters: 115200 8N1.
* Navigate to 'Management' in the OEM web interface and click on 'Firmware upgrade'
to the left.
* Upload the OpenWrt initramfs image, and wait till the switch reboots.
* Connect to the device through serial and change the U-boot boot command.
> fw_setenv bootcmd 'rtk network on; boota'
* Reboot, scp the sysupgrade image to /tmp, verify the checksum and flash it:
> sysupgrade openwrt-realtek-rtl930x-Zyxel_xgs1210-12-squashfs-sysupgrade.bin
* Upon reboot, you have a functional OpenWrt installation. Leave the bootcmd
value as is - without 'rtk network on' the switch will fail to initialise
the network.
Debug
------------
* Connect serial as per the layout above. Connection parameters: 115200 8N1.
* A tftp server is requiered, tftpd-hpa works well.
* Power the device, at U-Boot start rapidly hit Esc key to stop autoboot
* Enable network:
> rtk network on
* Change ip address (default is 192.168.1.1):
> setenv ipaddr 192.168.1.6
* Download initramfs:
> tftpboot 0x84f00000 192.168.1.111:openwrt-realtek-rtl930x-Zyxel_xgs1210-12-initramfs-kernel.bin
* Boot loaded file:
> bootm 0x84f00000
This prodecudre also apply to the sock firmware with the file XGS1210-12_V2.00(ABTY.1)C0.bix.
More information can be found on the page of XGS1250-12 as they share the same base.
Signed-off-by: Nicolas BERTRAND <nicolasbertrand89@gmail.com>
[fixed white space error]
Signed-off-by: Paul Spooren <mail@aparcar.org>
The TP-Link TL-ST1008F is an 8-port multi-gig switch with 8x SFP+ ports
which support 1G/2.5G/10G speeds. Out of the box it is an unmanaged
switch but with RTL9303 and sufficient RAM + Flash it easily can run as
a managed Linux switch.
Hardware:
- Realtek RTL9303 Switch SoC
- Winbond 25Q256JVFQ (32MB flash)
- Samsung K4B4G1646E-BYMA (512MB DDR3 SDRAM)
- TCA9534 GPIO extender to control the port LEDs
- 8x SFP+ 1/2.5/10G slot
- Serial: 3V3 logic, 115200 8N1
- 5-pin JTAG
- physical tri-state switch (used by stock firmware for port speed
config)
- 24-LED port speed matrix
- robust full-metal case
Power is supplied via a 12V 2A standard barrel connector.
There are THT holes on the PCB for serial console next to the flash chip
and JTAG pads. Serial uses 3V3 logic and standard 115200-8N1 config.
Pinout is labeled on the PCB.
All ports/connectors and LEDs are on the back, only Power LED is on the
front.
Hints before flashing
----------------------
* It is recommended to backup the stock flash contents before proceeding.
Backup can be done from U-Boot (with memory display), from OpenWrt
initramfs or probably with SPI flash programmer.
There is no stock recovery functionality.
* Use a small image for RAM boot or first flash. Since you need to use
ymodem, this is really slow and takes time.
* This does not keep the dual-partition layout for firmware to have more
space available for a single OpenWrt installation.
Initial flashing
----------------------
The stock U-boot has broken networking thus no TFTP available. Serial
transfer only.
1. Open device and connect serial as per layout and settings
(recommended to use picocom, ymodem not working with minicom)
2. Connect power to device and press Esc when prompted to enter
the U-Boot console.
3. Boot initramfs
* in the U-Boot console:
loady 0x82000000 (load OpenWrt image via ymodem)
CTRL-A CTRL-S <initramfs.bin> (specify initramfs image for
picocom to upload)
bootm 0x82000000 (boot initramfs from RAM)
(Just to be on the safe side, backup your flash now while RAM-booted)
4. Connect network to your device
5. Upload the sysupgrade image (e.g. with scp)
6. Do sysupgrade
There's no need to adjust the bootcmd in U-Boot. Networking is running
fine once the realtek driver initialized everything in OpenWrt. No
functional difference with running 'rtk network on' within U-Boot
before. Running this even fails and returns with an error.
Return to stock
------------------
This only works if you did a backup of the flash before flashing
OpenWrt. Stock dump then can be flashed from within U-Boot or OpenWrt.
There is no vendor firmware image because this is an unmanaged switch!
CAUTION: Make sure to not overwrite the U-Boot partition(s). If you do
not have a flash programmer, you may not be able to debrick
your device then.
Co-authored-by: Balázs Triszka <balika011@gmail.com>
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
