Commit fa0f130764 ("generic: 6.12: update block NVMEM driver") switched
to the upstream DT bindings for block partitions.
Bring back the old/legacy downstream way to assign the OF node to a
block device or partition in order to allow sharing a single DTS for
both, Linux 6.6 (which exclusively uses the old/legacy binding) and
Linux 6.12 (which will now support both, new/upstream binding and the
old/legacy binding).
Once we drop Linux 6.6 and all boards have been converted to the new
binding we can drop this patch.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
There are still a lot of mdio functions scattered around the code.
Move the RTL838x serdes helpers closer to the bus, add the proper
prefix and simplify the functions.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18847
Signed-off-by: Robert Marko <robimarko@gmail.com>
There is a patch/bug cascade in the realtek target phy code that must be resolved.
1. The phy_driver structure is patched to add features ONLY needed for RTL8214FC
2. The kernel is patched to allow switching fiber/copper port of phys through ethtool
by calling these new features.
3. With those patches applied the bootup always switches RTL8214FC ports to copper.
Even if a SFP module was found before and the phy driver switched to fibre before.
3. So another patch is needed that reprobes the SFP module to activate fiber again.
4. Because of the reprobing we need a fourth patch that avoid duplicate devices.
Simplify this by removing all patches and reusing the existing ethtool phy tunable
interface. The command line usage might be counterintuitive but it avoids tons of
problems in the code. In addition, this scenario is not used frequently.
Before:ethtool -s lan25 port fibre/tp
After: ethtool --set-phy-tunable lan25 downshift on/off
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18816
Signed-off-by: Robert Marko <robimarko@gmail.com>
We have modified the kernel to setup all "default" consoles,
including serial ports and framebuffers/screens, providing
no console= argument is supplied on the kernel command line.
Adding 'console=tty1' caused the 'default' serial port on
device tree systems to break, as the kernel would not carry
over the settings (like baud rate) from the bootloader.
The system administrator can still force the use of a
specific console by adding their own console= arguments.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: c099523d66 ("armsr: use console=tty1 to make
console more readily available")
Link: https://github.com/openwrt/openwrt/pull/17012
Signed-off-by: Robert Marko <robimarko@gmail.com>
A previous change added 'console=tty1' to the default kernel command
line on armsr, in order to ensure the framebuffer console is enabled
on systems capable of graphics output.
Unfortunately, this change broke boards that used device tree
(DT) firmware with serial consoles, as the serial console
specified by the system firmware (stdout-path) was no longer
setup by the kernel.
A bit of probing determined that the SPCR (serial port console
direction table) on ACPI systems was preventing Linux from setting
up a default framebuffer console on these systems (which is why
console=tty1 was added).
(The affected ACPI systems are usually VMs using QEMU's
'virt' machine and EDK2 firmware. The firmware on these systems
does not remove the SPCR when a screen is present)
So to ensure all possible systems are setup correctly, we modify
the kernel so all "default" console types (serial and screen)
are setup when no console= arguments are specified on the kernel
command line.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: c099523d66 ("use console=tty1 to make console more
readily available")
Link: https://github.com/openwrt/openwrt/pull/17012
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refresh patches to fix the GitHub CI warning.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18912
Signed-off-by: Nick Hainke <vincent@systemli.org>
SOC: MediaTek MT7981b
RAM: 256MB DDR3
FLASH: 128MB SPI-NAND (Winbond W25N01GV)
WIFI: Mediatek MT7981b DBDC 802.11ax 2.4/5 GHz
ETH: MediaTek MT7531 Switch
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
Interface MAC Algorithm
LAN 8C:AE:DB:2C:xx:xx label
WAN 8C:AE:DB:2C:xx:xx label +1
WLAN 2.4G 8C:AE:DB:2C:xx:xx label +2
WLAN 5G 8C:AE:DB:2C:xx:xx label +3
Installation
-------------------Install openwrt image-------------------------------:
Set a static ip on the ethernet interface of your PC. (ip address:
192.168.1.254, subnet mask:255.255.255.0) .
Download the OpenWrt uboot image
(openwrt-mediatek-filogic-snr_cpe-ax2-bl31-uboot.fip).
SSH/SCP opened by default on the stock firmware (3.0.1).
Username: Admin, default password: Admin. Check it on the bottom of
the router.
Copy uboot image using SCP (WinSCP) to /tmp dir on SNR-CPE-AX2.
Download recovery file.
openwrt-mediatek-filogic-snr_snr-cpe-ax2-initramfs-recovery.itb.
Copy the recovery image to a TFTP server reachable at 192.168.1.254/24.
Open ssh shell to the SNR-CPE-AX2.
Run commands:
mtd write \
/tmp/openwrt-mediatek-filogic-snr_snr-cpe-ax2-bl31-uboot.fip FIP
reboot
Wait until recovery boot.
Open web 192.168.1.1 and do sysupgrade by
openwrt-mediatek-filogic-snr_cpe-ax2-squashfs-sysupgrade.itb
Signed-off-by: Nikolay March <palladin82@yandex.ru>
Link: https://github.com/openwrt/openwrt/pull/18700
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Sort the config in alphabetical order
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/18897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream seems to be using led-sources instead of custom properties.
Code mostly taken from mt76.
Changed all(few) users of qca,led_pin to use the new format.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18805
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently adb uses libopenssl for certain authentication tasks between
the host and the target device such as certificate generation, hashing,
base64 encoding and pki signatures.
Add a patch to use functionalities available in mbedtls instead.
Also switch package makefile and dependency to libmbedtls and drop
patches and references to lib{crypto,openssl} as they are no longer
required.
This conserves considerable amount of space on the device as openwrt
ships with libmbedtls by default.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18819
Signed-off-by: Robert Marko <robimarko@gmail.com>
The MIPS CPC (Cluster Power Controller) is setup during boot and can take
its configuration from the devicetree. This is currently not possible
because the cpc probing happens before dt initialization. Call order
during startup is:
setup_arch()
prom_init() <- our function
mips_cpc_probe()
smp_stuff()
arch_mem_init()
device_tree_init() <- our function
unflatten_and_copy_device_tree()
To avoid ugly hacking and support a clean devicetree relocate the cps/smp
stuff to device_tree_init(). This is basically the same location as in
generic mips initialization.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Link: https://github.com/openwrt/openwrt/pull/18888
Signed-off-by: Robert Marko <robimarko@gmail.com>
Make it easier to upgrade the kernel in the future. For this remove
the 320-harden-fw_init_cmdline.patch and add the logic into the
startup sequence at the right place.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove upstreamed patches:
- 020-MIPS-Include-missing-mips16.S-in-libgcc-lib1funcs.S.patch
- 021-Reuse-scratch-registers-generated-by-LRA.patch
All other patches are automatically refreshed.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18891
Signed-off-by: Robert Marko <robimarko@gmail.com>
The 6.12 testing kernel for ath79 target is ready now.
Tested on AR9344 (ath79/nand) and QCA9531 (ath79/generic).
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
All kernel symbols are automatically refreshed by
`make kernel_oldconfig CONFIG_TARGET=target` and
`make kernel_oldconfig CONFIG_TARGET=subtarget`.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
This is a preparation for 6.12 kernel support. It can help us
track the files history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Manually move the common NVMEM Kconfig symbols to the shared
config file and disable them for the mikrotik subtarget. Other
changes are automatically completed by `make kernel_oldconfig`.
This is a preparation for introducing the 6.12 kernel support.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Currently, we are filtering out images if DEFAULT:=n or BROKEN:=y are set,
so if you are building from scratch and want to build custom images that
are stripped down to fit, you must edit the image recipe or its just
filtered out.
So, to allow this behaviour when building from scratch as we can assume
that person doing that knows what they are attempting to do lets just limit
the filtering to ImageBuilder.
Fixes: f060615a78 ("image: respect DEFAULT and BROKEN when Default profile is selected")
Signed-off-by: Robert Marko <robimarko@gmail.com>
RTL931x devices are dual core with two threads each. That is a total
of 4 VPEs (CPUs) in the kernel. Adapt the kernel config for that.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Link: https://github.com/openwrt/openwrt/pull/18889
Signed-off-by: Robert Marko <robimarko@gmail.com>
Debian Changelogs from 20250512:
* New upstream microcode datafile 20250512
- Mitigations for INTEL-SA-01153 (ITS: Indirect Target Selection):
CVE-2024-28956: Processor may incompletely mitigate Branch Target
Injection due to indirect branch predictions that are not fully
constrained by eIBRS nor by the IBPB barrier. Part of the "Training
Solo" set of vulnerabilities.
- Mitigations for INTEL-SA-01244:
CVE-2025-20103: Insufficient resource pool in the core management
mechanism for some Intel Processors may allow an authenticated user
to potentially enable denial of service via local access.
CVE-2025-20054: Uncaught exception in the core management mechanism
for some Intel Processors may allow an authenticated user to
potentially enable denial of service via local access.
- Mitigations for INTEL-SA-01247:
CVE-2024-43420, CVE-2025-20623: Exposure of sensitive information
caused by shared microarchitectural predictor state that influences
transient execution for some Intel Atom and some Intel Core
processors (10th Generation) may allow an authenticated user to
potentially enable information disclosure via local access.
CVE-2024-45332 (Branch Privilege Injection): Exposure of sensitive
information caused by shared microarchitectural predictor state that
influences transient execution in the indirect branch predictors for
some Intel Processors may allow an authenticated user to potentially
enable information disclosure via local access.
- Mitigations for INTEL-SA-01322:
CVE-2025-24495 (Training Solo): Incorrect initialization of resource
in the branch prediction unit for some Intel Core Ultra Processors
may allow an authenticated user to potentially enable information
disclosure via local access (IBPB bypass)
CVE-2025-20012 (Training Solo): Incorrect behavior order for some
Intel Core Ultra Processors may allow an unauthenticated user to
potentially enable information disclosure via physical access.
- Improved fix for the Vmin Shift Instability for the Intel Core 13th
and 14th gen processors under low-activity scenarios (sig 0xb0671).
This microcode update is supposed to be delivered as a system
firmware update, but according to Intel it should be effective when
loaded by the operating system if the system firmware has revision
0x12e.
- Fixes for unspecified functional issues on several processor models
* New microcodes or new extended signatures:
sig 0x000a06d1, pf_mask 0x95, 2025-02-07, rev 0x10003a2, size 1664000
sig 0x000a06d1, pf_mask 0x20, 2025-02-07, rev 0xa0000d1, size 1635328
sig 0x000b0650, pf_mask 0x80, 2025-03-18, rev 0x000a, size 136192
sig 0x000b06d1, pf_mask 0x80, 2025-03-18, rev 0x011f, size 79872
sig 0x000c0662, pf_mask 0x82, 2025-03-20, rev 0x0118, size 90112
sig 0x000c06a2, pf_mask 0x82, 2025-03-20, rev 0x0118
sig 0x000c0652, pf_mask 0x82, 2025-03-20, rev 0x0118
sig 0x000c0664, pf_mask 0x82, 2025-03-20, rev 0x0118
* Updated microcodes:
sig 0x00050657, pf_mask 0xbf, 2024-12-12, rev 0x5003901, size 39936
sig 0x0005065b, pf_mask 0xbf, 2024-12-12, rev 0x7002b01, size 30720
sig 0x000606a6, pf_mask 0x87, 2025-01-07, rev 0xd000404, size 309248
sig 0x000606c1, pf_mask 0x10, 2025-01-07, rev 0x10002d0, size 300032
sig 0x000706a8, pf_mask 0x01, 2024-12-05, rev 0x0026, size 76800
sig 0x000706e5, pf_mask 0x80, 2025-01-07, rev 0x00ca, size 115712
sig 0x000806c1, pf_mask 0x80, 2024-12-01, rev 0x00bc, size 112640
sig 0x000806c2, pf_mask 0xc2, 2024-12-01, rev 0x003c, size 99328
sig 0x000806d1, pf_mask 0xc2, 2024-12-11, rev 0x0056, size 105472
sig 0x000806ec, pf_mask 0x94, 2024-11-17, rev 0x0100, size 106496
sig 0x000806f8, pf_mask 0x87, 2025-01-28, rev 0x2b000639, size 591872
sig 0x000806f7, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f6, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f5, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f4, pf_mask 0x87, 2025-01-28, rev 0x2b000639
sig 0x000806f8, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7, size 624640
sig 0x000806f6, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7
sig 0x000806f5, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7
sig 0x000806f4, pf_mask 0x10, 2025-01-28, rev 0x2c0003f7
sig 0x00090672, pf_mask 0x07, 2024-12-12, rev 0x003a, size 226304
sig 0x00090675, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f2, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f5, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f6, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000b06f7, pf_mask 0x07, 2024-12-12, rev 0x003a
sig 0x000906a3, pf_mask 0x80, 2024-12-12, rev 0x0437, size 224256
sig 0x000906a4, pf_mask 0x80, 2024-12-12, rev 0x0437
sig 0x000906a4, pf_mask 0x40, 2024-12-06, rev 0x000a, size 119808
sig 0x000906ed, pf_mask 0x22, 2024-11-14, rev 0x0104, size 106496
sig 0x000a0652, pf_mask 0x20, 2024-11-14, rev 0x0100, size 97280
sig 0x000a0653, pf_mask 0x22, 2024-11-14, rev 0x0100, size 98304
sig 0x000a0655, pf_mask 0x22, 2024-11-14, rev 0x0100, size 97280
sig 0x000a0660, pf_mask 0x80, 2024-11-14, rev 0x0102, size 98304
sig 0x000a0661, pf_mask 0x80, 2024-11-14, rev 0x0100, size 97280
sig 0x000a0671, pf_mask 0x02, 2024-12-01, rev 0x0064, size 108544
sig 0x000a06a4, pf_mask 0xe6, 2025-02-13, rev 0x0024, size 140288
sig 0x000a06f3, pf_mask 0x01, 2025-02-10, rev 0x3000341, size 1542144
sig 0x000b0671, pf_mask 0x32, 2025-03-17, rev 0x012f, size 219136
sig 0x000b0674, pf_mask 0x32, 2025-03-17, rev 0x012f
sig 0x000b06a2, pf_mask 0xe0, 2025-01-15, rev 0x4128, size 224256
sig 0x000b06a3, pf_mask 0xe0, 2025-01-15, rev 0x4128
sig 0x000b06a8, pf_mask 0xe0, 2025-01-15, rev 0x4128
sig 0x000b06e0, pf_mask 0x19, 2024-12-06, rev 0x001d, size 139264
sig 0x000c06f2, pf_mask 0x87, 2025-03-14, rev 0x210002a9, size 563200
sig 0x000c06f1, pf_mask 0x87, 2025-03-14, rev 0x210002a9
* Removed microcodes (ES/QS steppings):
sig 0x00050656, pf_mask 0xbf, 2023-07-28, rev 0x4003605, size 38912
sig 0x000c06f1, pf_mask 0x87, 2025-03-14, rev 0x210002a9 [EXCLUDED]
Build system: x86/64
Build-tested: x86/64
Run-tested: x86/64
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/18869
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use upstreamed v6.16 patches for IPQ5018 tsens support.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18884
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use upstreamed v6.16 patch for IPQ5018 TCSR support and setting the
download mode.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18884
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use upstreamed patches for IPQ5018 PCIe support, including patches for
phy and controller drivers and dts nodes.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18884
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems that MOLD_MOSTLY_STATIC was required before to avoid packaging
every single dependency. But nowadays, mold uses whatever dependency it
can find and builds its own if it cannot.
Saves a small amount of compilation time.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18881
Signed-off-by: Robert Marko <robimarko@gmail.com>
It's using cmake.mk so it needs CMake to build.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18880
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Newer GCC and Clang default to C++17, which does not support register.
Just remove it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18859
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
