archs38 has been on life support for the last couple of releases,eventually
leading to marking it as source-only in 2023.
It has been basically only touched to do a kernel bump so that we can make
the new OpenWrt release.
Link: https://github.com/openwrt/openwrt/pull/19001
Signed-off-by: Robert Marko <robimarko@gmail.com>
Allow the armsr target to be built with a 6.12 kernel
when CONFIG_TESTING_KERNEL is set.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Link: https://github.com/openwrt/openwrt/pull/18849
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The kernel CONFIG_ARM_PMUV3 option was not being presented
for 6.12 kernels with armsr/armv7.
As the minimum kernel version is now 6.6, there is no need
to limit this to specific kernel versions anymore.
This caused a kernel compile stoppage when attempting to
compile the 'perf' tool for armsr/armv7.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Link: https://github.com/openwrt/openwrt/pull/18849
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This includes both new additions to 6.12
and an attempted "refresh" of the config
to remove duplicates from target/generic/config-6.12.
(The OpenWrt kernel_makeoldconfig does not
work well with the armv8 subtarget for reasons
I am yet to determine, so that file has been
pruned manually)
Most new options are in armv8, where the
KConfig relates to a platform that will likely
be armsr compatible (like the i.MX91/93/95),
it has been enabled.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Link: https://github.com/openwrt/openwrt/pull/18849
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There are no patches that need to be refreshed.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19020
Signed-off-by: Nick Hainke <vincent@systemli.org>
Introduced with Linux 6.7, in commit:
5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result"),
when a parser returns an error, this will be passed up, and
consequently, all parent mtd partitions get torn down.
Adjust the mtdsplit_uimage driver to only return an error if there is a
critical problem in reading from the mtd device or allocating memory.
Otherwise return 0 to indicate that no partitions were found.
Also add logging to indicate what went wrong.
E.g. on Realtek devices that are booted for the first time through
initramfs with OpenWrt never installed before boot log will show
[ 0.932985] Creating 8 MTD partitions on "spi0.0":
[ 0.938412] 0x000000000000-0x000000080000 : "u-boot"
[ 0.990151] 0x000000080000-0x0000000c0000 : "u-boot-env"
[ 0.999907] 0x0000000c0000-0x000000100000 : "board-name"
[ 1.019971] 0x000000100000-0x000000e80000 : "firmware"
[ 1.051582] mtdsplit_uimage: no uImage found in "firmware"
[ 1.069365] 0x000000e80000-0x000001000000 : "kernel2"
[ 1.078959] 0x000001000000-0x000001040000 : "sysinfo"
[ 1.099747] 0x000001040000-0x000001c40000 : "rootfs2"
[ 1.119865] 0x000001c40000-0x000002000000 : "jffs2"
Similar issue was fixed before with commit ade045084b
("kernel: mtdsplit_minor: return 0 if not fatal")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19016
Signed-off-by: Robert Marko <robimarko@gmail.com>
GL.iNet shipped a hardware change of the WAN PHY going from the MaxLinear
GPY211C to the Airoha EN8811H.
Signed-off-by: Matthew Bilker <me@mbilker.us>
Link: https://github.com/openwrt/openwrt/pull/18799
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Trying to use modules for the PHY:s does not work:
The ethernet driver does not like to probe if it can't find
the PHY.
The ethernet driver really likes to be compiled-in. It will
not probe otherwise. Some hardware issue.
Revert things to how they always worked until I maybe solve
this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Building against recent kernel versions (noticed with 6.12) and -Werror
can fail because a macro MAX(a,b) is already defined in minmax.h or
kernel.h before 5.10.
In file included from ../mwlwifi-2025.02.06~db97edf2/hif/fwcmd.h:23,
from ../mwlwifi-2025.02.06~db97edf2/core.c:25:
../mwlwifi-2025.02.06~db97edf2/hif/hostcmd.h:1124:9: error: "MAX" redefined [-Werror]
1124 | #define MAX(a, b) (((a) > (b)) ? (a) : (b))
| ^~~
In file included from usr/include/mac80211-backport/linux/minmax.h:4,
from ./include/linux/kernel.h:28,
from usr/include/mac80211-backport/linux/kernel.h:3,
from ./include/linux/skbuff.h:13,
from usr/include/mac80211-backport/linux/skbuff.h:3,
from ./include/linux/if_ether.h:19,
from usr/include/mac80211-backport/linux/if_ether.h:3,
from ./include/linux/etherdevice.h:20,
from usr/include/mac80211-backport/linux/etherdevice.h:3,
from ../mwlwifi-2025.02.06~db97edf2/core.c:18:
./include/linux/minmax.h:330:9: note: this is the location of the previous definition
330 | #define MAX(a,b) __cmp(max,a,b)
| ^~~
Add a pending upstream patch which replaces the MAX(a,b) macro to avoid
conflicts and allow compilation with 6.12
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/18980
Signed-off-by: Robert Marko <robimarko@gmail.com>
Request Softwire46 (S46) [RFC 7598] options when the map and/or ds-lite
packages are installed. This is required as the behaviour of odhcp6c has
changed to not include these OROs by default.
See openwrt/odhcp6c#89
Signed-off-by: Richard Patterson <richard@helix.net.nz>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
* Extends SoC thermal sensor on rtl839x
* Tested on HP JG928A
Signed-off-by: Stephen Howell <howels@allthatwemight.be>
Link: https://github.com/openwrt/openwrt/pull/18825
Signed-off-by: Robert Marko <robimarko@gmail.com>
Regulators as implemented by the XHCI driver only accept one GPIO.
However, we can abuse the fact that the XHCI driver accepts two
regulators, one for 5V and the other for 3.3V, for USB 2 and 3 GPIOs.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16967
Signed-off-by: Robert Marko <robimarko@gmail.com>
This can be done with so little effort, all but two patches are now
upstream. No need to keep support for v6.6, everything just works
the same or better with v6.12.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The resets in the GCC of the uniphy found in the IPQ5018 SoC are
incorrect which broke the ability to shift between 1G and 2.5G link
speeds. So let's correct the resets based on below two downstream
commits.
In a seperate and prequisite PR to the QCA-SSDK repo, logic has been
implemented to select the right reset based on the link setup so fixed
link scenarios don't break.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
446db12b1fd3 MP: fix uniphy reset in phy to phy link scenario
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
Ahead of the actual fix in both the GCC and QCA-SSDK, add the required
AHB reset so it can be picked up by updated QCA-SSDK. This is needed
as the SSDK needs to use different resets depending on the link
architecture. If it's a fixed link, AHB needs to be reset. In a phy to
phy link setup (such as QCA8081), SYS, RX, and TX need to be reset using
one reset with a bitmask in the GCC (GCC_UNIPHY_SOFT_RESET).
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
With completely carving out GE PHY out of the QCA-SSDK, the named clock
references to the GE PHY RX and TX clocks are no longer needed.
So, let's revert to using the DT indices as per the upstream GCC driver.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
3423fdacac63 ssdk_clk: Remove MP_PHY clocks resets and init logic
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use latest patches sent upstream for review for IPQ5018 GE PHY support:
- Move enablement of the LDO controller to the mdio-ipq4019 driver away
from the CMN PLL driver
- Remove the different patches to add CDT, MSE, AZ, and DAC support they
are all contained in the upstreamed driver.
Accordingly, also set the right property in the DTS for Linksys SPNMX56
to set the right DAC values to accommodate for the short cable length.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
kmod-fs-ntfs is not available on the 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18954
Signed-off-by: Robert Marko <robimarko@gmail.com>
As qualcommbe is now supported by the v6.12 kernel, there is no point
in v6.6 as well. Drop v6.6 support.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18982
Signed-off-by: Robert Marko <robimarko@gmail.com>
The qualcommbe target was introduced after openwrt-24.10. The v6.12
kernel is now available, and is likely to be used by the next openwrt
release.While the v6.6 kernel served as an interim development vehicle,
it is no longer useful for the qualcommbe target
The v6.12 patches contain more recent submissions of pending ipq95xx
drivers. I expect that it will be much easier to update v6.12 patches
with new submissions. For ease of maintenance, it makes sense to use
a single kernel for qualcommbe.
For these reasons, enable v6.12 by default.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18982
Signed-off-by: Robert Marko <robimarko@gmail.com>
The external switch of the Huawei HG556a is a BCM5325E connected by MDIO.
All the DSA brcm legacy FCS tag and b53 patches have been submitted upstream
and will be backported when accepted.
There are still some sporadic FDB errors, but at least the switch is working
and stable on my device:
bcm53xx fffe4800.ethernet-mii:1e: port 0 failed to add 72:31:59:xx:xx:xx vid 1 to fdb: -28
bcm53xx fffe4800.ethernet-mii:1e: port 0 failed to add 5c:4c:a9:xx:xx:xx vid 0 to fdb: -28
bcm53xx fffe4800.ethernet-mii:1e: port 0 failed to add 5c:4c:a9:xx:xx:xx vid 1 to fdb: -28
bcm53xx fffe4800.ethernet-mii:1e: port 0 failed to delete 72:31:59:xx:xx:xx vid 1 from fdb: -2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add support for V3 of the Engenius EWS2910P PoE switch. Like its v1
brother, This is an RTL8380 based switch with two SFP slots, and PoE
802.3af one every RJ-45 port.
Unlike its older brother, the max budget is 55W instead of 61.6 W.
Investigation into the communication protocol with the PoE controller
is ongoing, though it appears the vendor firmware configures the PSE
with a per-port budget of 30.0W.
Specifications:
---------------
* SoC: Realtek RTL8380M
* Flash: 32 MiB SPI flash Macronix MX25L25635E
* RAM: 256 MiB (As reported by bootloader)
* Ethernet: 8x 10/100/1000 Mbps with PoE
2x SFP slots
* Buttons: 1 "Reset" button on front panel
1 "LED mode: button on front panel
1 "On/Off" Toggle switch on the back
* Power: 48V-54V DC barrel jack
* UART: 1 serial header (JP1) with populated 2.54mm pitch header
Labeled GRTV for ground, rx, tx, and 3.3V respectively
* PoE: 1 STM ST32... microcontroller (U15)
1 RTL8238B PSE controller
Works:
------
- (8) RJ-45 ethernet ports
- Switch functions
- LEDs and buttons
Not yet enabled:
----------------
- Power-over-Ethernet (requires realtek-poe support for RTL8232B)
Install via web interface:
-------------------------
The factory firmware will accept and flash the initramfs image. It is
recommended to flash to "Partition 0". Flashing to "Partition 1" is
not supported at this point.
The factory web GUI will show the following warning:
" Warning: The firmware version is v0.00.00-c0.0.00
The firmware image you are uploading is older than the current
firmware of the switch. The device will reset back to default
settings. Are you sure you want to proceed?"
This is expected when flashing OpenWrt. After the initramfs image
boots, flash the -sysupgrade using either the commandline or LuCI.
Install via serial console/tftp:
--------------------------------
See commit 2cfaab4549 ("realtek: add support for EnGenius EWS2910P").
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15217
Signed-off-by: Robert Marko <robimarko@gmail.com>
When the Engenius EWS-2910P was added, only v1 was known. Move the
common parts to a dtsi, and split up the support to acccount for the
hardware version.
On v3, for example, the root partition uses a different uImage magic.
Add a "engenius,ews2910p-v1" compatible, while leaving the legacy
"engenius,ews2910p" to also mean v1.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15217
Signed-off-by: Robert Marko <robimarko@gmail.com>
Every time "sysupgrade -b -" runs it would generate a new
(synthetic) "/etc/uci-defaults/10_disable_services" file with
the current time as the modified time. This unfortunately
creates a non-deterministic tarball, so if you run a cron job
to save your state, you don't have a trivial way of seeing if
it changed or not without unpacking the archive, deleting this
file, and comparing the entire directory tree to the previous
backup.
Fixes: #16145
Fixes: 0ad062a21b ("base-files: sysupgrade: include uci-defaults script disabling services #2")
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
When running ACS on multi-radio devices, ACS on one band can block another.
Increase the number of retries and prevent bouncing interfaces between AP
and STA mode during attempts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
DSA silently drops internal phy access to ports >= 32 in dsa_user_phy_read()
and dsa_user_phy_write(). The code shows:
static int dsa_user_phy_read(struct mii_bus *bus, int addr, int reg)
{
struct dsa_switch *ds = bus->priv;
if (ds->phys_mii_mask & (1 << addr))
return ds->ops->phy_read(ds, addr, reg);
return 0xffff;
}
With ds->phys_mii_mask being a 32 bit variable the reason is clear. So do
not only increase the max values but also adapt the needed bitmasks in
the dsa and phy code. This fixes the dsa_user_ports() and dsa_cpu_ports()
too.
While we are here combine the old separated patches because dsa, mdio and
phy are tigthly coupled.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18846
Signed-off-by: Robert Marko <robimarko@gmail.com>
The PCS driver in the 6.12 patchset is the v5 submission (see link
below). It solves a number of issues and crashes with teh pcs driver
from the 6.6 patchset. However, this new driver is missing support for
"10gbase-r", "10g-qxgmii", and 1000/2500base-x modes.
Port these modes to the 6.12 patchset. "2500base-x" in particular seems
to be needed to establish a 2.5G link on phy-mode="usxgmii";
Link: https://lore.kernel.org/lkml/20250207-ipq_pcs_6-14_rc1-v5-0-be2ebec32921@quicinc.com/
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18796
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now that patches for v6.12 are available, add the config, and enable
6.12 as a testing kernel.
Compared to v6.6 the patches to add "10gbase-r", "2500base-x",
"1000base-x", and "10g-qxgmii" modes have not been ported yet. They do
not apply cleanly to the new PCS driver. As the currently supported
hardware does not use those modes, it is not possible to test them at
this time.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18796
Signed-off-by: Robert Marko <robimarko@gmail.com>
Copy the v6.6 config to v6.6. It will be updated in a subsequent
commit in order to show the changes.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18796
Signed-off-by: Robert Marko <robimarko@gmail.com>
