Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[update to 3.1, make use of Python 3, and update dependencies]
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[strip library after adding it to openwrt repository]
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Similar to `syncthing` also `prometheus` build environment sets
variables later shown in the `--version` string. Set those varialbes.
Signed-off-by: Paul Spooren <mail@aparcar.org>
* The upstream script changed to use `.hosts` files from `.conf` files,
so changes were required to make dnsmasq use the new file format.
* Added a default wolfssl variant.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
This release adds the advanced folder option caseSensitiveFS
(https://docs.syncthing.net/advanced/folder-caseSensitiveFS.html) to
disable the new safe handling of case insensitive filesystems.
Bugfixes:
#1787: Case-only renames break stuff
#5708: Properly handle upper-/lowercase-only file name collisions
#6613: TestWatchRename test fails on FreeBSD.
#6793: Error status should take precedence over Local Additions
#6850: Global state incorrect when ignoring local change
#6864: Folder incorrectly marked “Up to Date” after switching from “Receive Only” to “Send & Receive”
#6867: Certificate error when built with Go 1.15
#6886: chmod permission after editing .stignore via WebUI not preserved
#6889: test failures with Go 1.15
#6892: Syncthing 1.8.0 trying to connect via wrong network route
#6898: tests in TestCopyRange fail on ppc64le with "inappropriate ioctl for device"
#6908: NAT service fails to terminate during Shutdown
#6910: Local Additions when deleting file after changing folder type from SR to RO
#6922: Auto accepted folders not saved
#6938: Modifying config during first scan corrupts folder state
Enhancements:
#2739: Syncthing should be case insensitive by default
#5579: Avoid anti-aliasing artifacts for svg device icons
#6873: Don't fail dirs in receive-only folders that were removed elsewhere but exist locally
Signed-off-by: Paul Spooren <mail@aparcar.org>
Changes:
- Pass compiler flags through PORT_CFLAGS (previously, it was always compiled with -O2 -lrt)
- Add option to override toolchain and use -O3
- Disable MIPS16 (highly decreases results)
- Enable LTO
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Update collectd to version 5.12.0.
* Refresh patches
* Remove upstreamed patch 920-fix-ubi-data-source-type.patch
* Backport a patch from upstream to fix a missing define
(920-backport-netlink-reg-noerror.patch)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The rb532 target has finally been removed in master, so drop the
dependencies in this package.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The ar71xx target has finally been removed in master, so drop the
dependencies in this package.
Don't remove the patch for the TEW673GRU driver, as it may come
back with ath79.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Description: uhubctl is a utility that allows you to control USB power
on USB hubs that implement per-port or ganged power switching.
Signed-off-by: Steven Honson <steven@honson.id.au>
Cleaned up Makefile for consistency between packages.
Fixed license information.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Maintainer: @blogic me
Compile tested: head r14241-ba2ddba, x86_64
Run tested: x86_64 (VirtualBox)
Description:
Addressed the build failure with node.js version 12.
https://github.com/openwrt/packages/pull/12225
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
Add license information.
Add PKG_INSTALL and PKG_BUILD_PARALLEL for consistency between packages.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
There are intermittent build failures on the buildbots because of this.
I see the same build failures locally as well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
usleep is deprecated.
Modernized the Makefile to modern standards.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5969273ff4 mistakenly got rid of the
install section for canutils, causing errors when trying to install.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
command-count.h generated by makefile was wrong
when using default shell in mac,
set shell to bash to fix it.
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
LVM2 uses libselinux if found at buildtime and then requires it to
be present on run-time.
As LVM2 is usually not installed on space-constraint systems just
always build with libselinux as apart from the extra space usage it
doesn't hurt.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This was caused by upstream project commit db5adeaa ("build-sys: clean
up flags included in the linker command line")
Reported-by: W. Michael Petullo <mike@flyn.org>
Link: https://github.com/openwrt/packages/issues/13081
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.
Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.
Signed-off-by: Paul Spooren <mail@aparcar.org>
If ttyd is configured to ssl, you will get the following message in the
log `refuse to serve WS client for illegal ws path`. Upstream a patch
has already been applied which fixes this.
Since there is no newer version than 1.6.1, this fix is backported as a
patch. And could be removed if a new version of ttyd is available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
GCC10 defaults to -fno-common , which breaks compilation as there are
multiple variables defined outside of the header file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Append missing debug option value.
If this is not append and the debug option is selected, then we get the
following error output on ttyd start.
> ttyd: missing start command
To fix this add missing debug option value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Added the mount utilities. It turns out that udev is not a requirement.
Renamed package to fuse3 and moved to utils, as with fuse2.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit adds two additional init.d targets:
* uciadd:
This command adds the default docker0 bridge to the network
configuration. Additional, a new firewall zone docker is created
* ucidel
This command removes default docker0 bridge from the network
configuration. The new docker firewall zone gets also deleted.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Removed multibyte options. They must now be enabled.
Refreshed patches.
Commented out autowrite as requested in
https://github.com/openwrt/packages/pull/12177
Signed-off-by: Rosen Penev <rosenp@gmail.com>
API change.
Cleaned up Makefile.
Fixed license information.
Remove pointless CMAKE_INSTALL. This is not needed in InstallDev.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If the uci configuration is changed send dockerd a SIGHUP to reload the
generated daemon.json file with the new configuration.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Extract data from configuration file /etc/config/dhcp and create labels
{name, ip, mac, dns} via uci. Those labels are useful in order to craft
complex prometheus queries as replacing the MAC address to a custom
name. E.g.: wifi_station_signal_dbm * on (mac) group_left(name)
uci_dhcp_host or on (mac) label_replace(wifi_station_signal_dbm, "name",
"$1", "mac", "(.+)")
Signed-off-by: Gérondal Thibault <contact@tycale.be>
Added patches to fix meson compilation.
Reworked flashrom.mk to work with meson.
Several minor Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
A bit ugly but it works.
Added PKG_BUILD_PARALLEL for faster compilation.
Fix license information.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This adds a new Makefile variable, GO_PKG_TAGS, for Go packages. When
set, the value is passed as the parameter of the -tags option for 'go
install'.
This also updates syncthing to use this variable.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
I've noticed that in deployment on some reboots it won't configure,
This seems to be due to running before the system/network is ready.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
