This was caused by upstream project commit db5adeaa ("build-sys: clean
up flags included in the linker command line")
Reported-by: W. Michael Petullo <mike@flyn.org>
Link: https://github.com/openwrt/packages/issues/13081
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.
Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.
Signed-off-by: Paul Spooren <mail@aparcar.org>
If ttyd is configured to ssl, you will get the following message in the
log `refuse to serve WS client for illegal ws path`. Upstream a patch
has already been applied which fixes this.
Since there is no newer version than 1.6.1, this fix is backported as a
patch. And could be removed if a new version of ttyd is available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
GCC10 defaults to -fno-common , which breaks compilation as there are
multiple variables defined outside of the header file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Append missing debug option value.
If this is not append and the debug option is selected, then we get the
following error output on ttyd start.
> ttyd: missing start command
To fix this add missing debug option value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Added the mount utilities. It turns out that udev is not a requirement.
Renamed package to fuse3 and moved to utils, as with fuse2.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit adds two additional init.d targets:
* uciadd:
This command adds the default docker0 bridge to the network
configuration. Additional, a new firewall zone docker is created
* ucidel
This command removes default docker0 bridge from the network
configuration. The new docker firewall zone gets also deleted.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Removed multibyte options. They must now be enabled.
Refreshed patches.
Commented out autowrite as requested in
https://github.com/openwrt/packages/pull/12177
Signed-off-by: Rosen Penev <rosenp@gmail.com>
API change.
Cleaned up Makefile.
Fixed license information.
Remove pointless CMAKE_INSTALL. This is not needed in InstallDev.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If the uci configuration is changed send dockerd a SIGHUP to reload the
generated daemon.json file with the new configuration.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Extract data from configuration file /etc/config/dhcp and create labels
{name, ip, mac, dns} via uci. Those labels are useful in order to craft
complex prometheus queries as replacing the MAC address to a custom
name. E.g.: wifi_station_signal_dbm * on (mac) group_left(name)
uci_dhcp_host or on (mac) label_replace(wifi_station_signal_dbm, "name",
"$1", "mac", "(.+)")
Signed-off-by: Gérondal Thibault <contact@tycale.be>
Added patches to fix meson compilation.
Reworked flashrom.mk to work with meson.
Several minor Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
A bit ugly but it works.
Added PKG_BUILD_PARALLEL for faster compilation.
Fix license information.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This adds a new Makefile variable, GO_PKG_TAGS, for Go packages. When
set, the value is passed as the parameter of the -tags option for 'go
install'.
This also updates syncthing to use this variable.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
I've noticed that in deployment on some reboots it won't configure,
This seems to be due to running before the system/network is ready.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
Until now, the firewall rules from the dockerd were preserved after the
service was stopped. This is not nice. With this change the firewall rules
created by dockerd will be deleted when the dockerd service is stopped.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Upstream backport.
Adjusted package to use PKG_INSTALL for consistency between packages.
Added PKG_BUILD_PARALLEL for faster compilation.
Adjusted InstallDev section to install the pkgconf file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
default inotify limits at 8k are
low for serious usage
and the GUI shows errors like
"Failed to start filesystem watcher
for folder XXXX"
increase them with this config file
as instructed by syncthing's FAQ.
https://docs.syncthing.net/users/
faq.html#inotify-limits
Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
[bumped PKG_RELEASE]
Signed-off-by: Paul Spooren <mail@aparcar.org>
Allows simplifying the Makefile. Faster compilation as well.
Revert b70cb0ef5e
That commit was misleading and ended up bloating the Utilities section.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
As simple package, providing a utility ("br") for controlling X10
home automation Firecracker transmitters over serial.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
About the patch: Gnuplot build process includes the compilation of some
custom binaries which are subsequently used to generate help files/docs.
Since those binaries are compiled for TARGET, this breaks the build on
the HOST. The patch disables the generation of those binaries (and the
documentation).
Signed-off-by: Matteo Cicuttin <datafl4sh@toxicnet.eu>
Setting the GO_PKG_LDFLAGS_X after including golang-package does not
include them anymore after commit 25a7f00. By adding flags before they
are correctly loaded and included in `syncthing` binary.
Signed-off-by: Paul Spooren <mail@aparcar.org>
DAWN is a decentralized WiFi Controller.
https://github.com/berlin-open-wireless-lab/DAWN
The node exporter allows to gather statistics about your network:
- Infos about AP (Channel Utilization, Station Count, ...)
- Connected Clients (Signal, Capabilities)
Signed-off-by: Nick Hainke <vincent@systemli.org>
Fix license information.
Add URL.
Add HOST_BUILD_PARALLEL for faster compilation.
Add PKG_HOST_ONLY to signify that this is to be used as a host package
only.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://kb.vmware.com/s/article/60262
Add new package to support Shared Folders user mode FUSE client.
Signed-off-by: Xingwang Liao <kuoruan@gmail.com>
Currently the init script generates a config file from uci, that has the
include line before the interval line. This means, that anything happening
in the include directory does not yet see the changed Interval.
Moving the include line before the uci generation process fix this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Currently the values are stored in the ubi plugin as data source type
`counter`. But this makes no sense, because the values change very slowly
and I don't want to know the rate of change. It is better to store the
value as data source type `gauge`. Then I can see the current value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Since size is not a problem here, use libxcrypt to avoid algorithm
availability. Changed default to bcrypt as that's the strongest
supported by shadow-utils.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
