According to the NEWS message from the main OVS site:
http://openvswitch.org/releases/NEWS-2.3.0
Excerpt:
- ovs-controller has been renamed test-controller. It is no longer
packaged or installed by default, because too many users assumed
incorrectly that ovs-controller was a necessary or desirable part
of an Open vSwitch deployment.
Current feed was updated based on a feed that packaged OVS 1.9,
and subsequently updated.
For now, we'll remove it, since it's not required.
When I tested the feed, I tested it on a setup that has been configured
some time ago, and does not have that package enabled.
So, I'll remove it to prevent confusion.
Signed-off-by: Alexandru Ardelean ardeleanalex@gmail.com
- [PATCH 01/13] DOC: clearly state that the "show sess" output format
- [PATCH 02/13] MINOR: stats: fix minor typo fix in
- [PATCH 03/13] MEDIUM: Improve signal handling in systemd wrapper.
- [PATCH 04/13] MINOR: Also accept SIGHUP/SIGTERM in systemd-wrapper
- [PATCH 05/13] DOC: indicate in the doc that track-sc* can wait if
- [PATCH 06/13] MEDIUM: http: enable header manipulation for 101
- [PATCH 07/13] BUG/MEDIUM: config: propagate frontend to backend
- [PATCH 08/13] MEDIUM: config: properly propagate process binding
- [PATCH 09/13] MEDIUM: config: make the frontends automatically bind
- [PATCH 10/13] MEDIUM: config: compute the exact bind-process before
- [PATCH 11/13] MEDIUM: config: only warn if stats are attached to
- [PATCH 12/13] MEDIUM: config: report it when tcp-request rules are
- [PATCH 13/13] MINOR: config: detect the case where a tcp-request
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
By default the package detects the presence of pdflatex and builds documentation automatically.
During the OpenWrt build this behavior is not acceptable. The added patch introduces a configure
option to explicitly enable the build of the documentation on request.
Signed-off-by: Johannes Morgenroth <morgenroth@ibr.cs.tu-bs.de>
Add a patch to prevent use of LD_LIBRARY_PATH when checking for BDB libs
This caused build failure when host = target
Signed-off-by: Nicolas Thill <nico@openwrt.org>
rsync, by default, includes a patched zlib within its source tarball. The patch
enables a better compression ratio for rsync streams. However, the client and
server need the same featureset in their zlib in order to understand the
compression stream, or the server will abort the transfer. Older versions have
no understanding of the new compression standard used.
This patch allows the builder to choose whether to use the bundled or system
zlib. It defautls to using the system zlib, as is the default before this
patch.
Signed-off-by: Ian Leonard <antonlacon@gmail.com>
This package adds the mac-telnet server, client, ping and discovery utilities.
See https://github.com/aouyar/MAC-Telnet for details.
This package uses the fork from https://github.com/jow-/MAC-Telnet as source,
the code there has a number of bugfixes and results in smaller binaries since
most core functionality has been ported to libubox facilities provided by
OpenWrt.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
- BUG: config: error in http-response replace-header number of arguments
- BUG/MINOR: Fix search for -p argument in systemd wrapper.
- BUG/MEDIUM: auth: fix segfault with http-auth and a configuration with an unknown encryption algorithm
- BUG/MEDIUM: config: userlists should ensure that encrypted passwords are supported
- MEDIUM: connection: add new bit in Proxy Protocol V2
- BUG/MINOR: server: move the directive #endif to the end of file
- BUG/MEDIUM: http: tarpit timeout is reset
- BUG/MAJOR: tcp: fix a possible busy spinning loop in content track-sc*
- BUG/MEDIUM: http: fix inverted condition in pat_match_meth()
- BUG/MEDIUM: http: fix improper parsing of HTTP methods for use with ACLs
- BUG/MINOR: pattern: remove useless allocation of unused trash in pat_parse_reg()
- BUG/MEDIUM: acl: correctly compute the output type when a converter is used
- CLEANUP: acl: cleanup some of the redundancy and spaghetti after last fix
- BUG/CRITICAL: http: don't update msg->sov once data start to leave the buffer
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
The git-daemon command currently doesn't work and displays the following
error whenever a repository is cloned:
error: cannot run daemon: No such file or directory
[10920] unable to fork
On the client side the connection is simply terminated. The problem is,
that git-daemon tries to start a new instance of itself for every
new client that is connecting. It expects argv[0] to contain
"git-daemon", but since it is converted into a builtin command, argv[0]
only contains "daemon", which does not exist and causes the above error.
The fix simply prepends "git" to the list of arguments, so that the
resulting call looks something like "git daemon --serve ..."
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
- [PATCH 5/6] BUG/MEDIUM: http: tarpit timeout is reset
- [PATCH 6/6] MEDIUM: connection: add new bit in Proxy Protocol V2
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
Since the current release of the package does not provide a
configure option to disable this dependency, a patch is necessary
to add this option.
Signed-off-by: Johannes Morgenroth <morgenroth@ibr.cs.tu-bs.de>
Since the current release of the package does not provide
configure options to disable these dependencies, a patch is necessary.
Signed-off-by: Johannes Morgenroth <morgenroth@ibr.cs.tu-bs.de>
- update to latest version (v2.0.4)
- use PKG_INSTALL
- add DBI plugin
- convert init script to procd
- add license info
- add myself as maintainer
Signed-off-by: Nicolas Thill <nico@openwrt.org>
This package contains the tools (dtnsend, dtnrecv, dtnping, ...) of IBR-DTN, a modular
and lightweight implementation of the bundle protocol (RFC 5050).
https://github.com/ibrdtn/ibrdtn
Signed-off-by: Johannes Morgenroth <morgenroth@ibr.cs.tu-bs.de>
This package contains the daemon (dtnd) of IBR-DTN, a modular and lightweight
implementation of the bundle protocol (RFC 5050). https://github.com/ibrdtn/ibrdtn
Signed-off-by: Johannes Morgenroth <morgenroth@ibr.cs.tu-bs.de>
This is an import of the net/unbound package from Subversion
revision 40658 (May 2, 2014). The only change is the addition of
PKG_LICENSE, PKG_LICENSE_FILE and PKG_MAINTAINER to Makefile.
Unbound 1.4.22 is the current upstream release.
Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Use right size of addresses in bind() call. Also use getpeername addresses when
connecting to ident service to prevent address family mismatch between socket(),
bind() and connect() calls.
---
Christian Schoenebeck via github pull request #205:
Reported for a long time in the web. Still exists in the current sources.
Already reported and offert on TRAC Ticket #15821.
You can find a lot of entries on "Google" about the reported problem.
I got the same error on my WNDR3800 and von VirtualBox X86.
I copied the patch to my local trunk build system and recompiled.
The problem was fixed.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Replace the MAINTAINER lines in packages that I maintain with
PKG_MAINTAINER lines, to be consistent with the rest of the packages
tree.
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
smartsnmpd is an implementation of SNMP Agent developed by Credo Semi. It
use Lua as script language to write SNMP MIB nodes to improve the efficiency
of developtment.
This package add native support for OpenWrt. Include using ubus and uci to
get status/info. And, it use uloop as low level event library. So it's
some sort of desgin for OpenWrt.
Website: https://github.com/credosemi/smartsnmp
Signed-off-by: Leo Ma <leoma@credosemi.com>
Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>
Set PKG_LICENSE as written inside dynamic_dns_updater.sh and dynamic_dns_functions.sh.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
A minor point release.
* Don’t ask client for certificate when require_certificate is false.
* Fix incorrect handling of anonymous bridges on the local broker.
* backout incomplete functionality incorrectly added in 1.3.2
Signed-off-by: Karl Palsson <karlp@remake.is>
shortened title so it fits on menuconfig screen
added newline in description so no menuconfig side scrolling required
Signed-off-by: Aedan Renner chipdankly@gmail.com
The ixp4xx patch is removed as I couldn't find any information about a driver
with this name, neither in the OpenWrt kernel nor upstream. If anybody knows
that it was actually useful after all, please tell me...
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
- upgrade to 1.5.3
- [PATCH 1/3] BUG/MINOR: server: move the directive #endif to the end
- [PATCH 2/3] BUG/MINOR: Fix search for -p argument in systemd wrapper.
- [PATCH 3/3] BUG/MAJOR: tcp: fix a possible busy spinning loop in
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
Service provided by Securepoint GmbH, 21335 Lüneburg, Germany
Info at http://www.spdns.de
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
To be consistent with other services only start via hotplug if enabled.
Now full functionality of /etc/init.d/ddns enable/disable start/stop
Optimization: Include script only if needed
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Hotplug script will start service for each interface.
To prevent duplicates and in general must not start on boot.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
1.) No SysLog possible because keyword misspelled
In tinyproxy.conf and tinyproxy.config the parameter is correct spelled
with small "l"
2.) No logging as non root user
The default is that tinyproxy deamon run as nobody:nogroup, but they have no permission to /var/log/ or any other location.
So touch and change permission for logfile during startup
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
In the absense of an address entry bind to all interfaces which is also
iodined's default when -l isn't given.
Signed-off-by: Uwe Kleine-König <uwe+openwrt@kleine-koenig.org>
Fall back to the default DNS port (i.e. 53). If you configure something
different than 53 this results in a warning from iodined:
ALERT! Other dns servers expect you to run on port 53.
You must manually forward port 53 to port $port for things to work.
This is obviously true.
Signed-off-by: Uwe Kleine-König <uwe+openwrt@kleine-koenig.org>
if running as non root user (what's should be the default on web-servers) you get:
(log.c.118) opening errorlog '/var/log/lighttpd/server.log' failed: Permission denied
Fix: create log directory only if not exist and chmod 777 to allow anyone
to write and create files inside default log directory
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
This is compatible to 0.6.0-rc1 client and servers and fixes an
authentication bypass bug (CVE-2014-4168).
Signed-off-by: Uwe Kleine-König <uwe+openwrt@kleine-koenig.org>
update from v0.82 to v0.85
set myself as maintainer
drop out of date patches:
patches/520-libresolv_fix.patch
patches/521-gtk_fix.patch
backport 25a2456 from upstream to fix glib dependency issue:
patches/521-glib-dependency-fixes.patch
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
[PATCH 4/5] BUG/MINOR: http: base32+src should use the big endian
[PATCH 5/5] BUG/MEDIUM: connection: fix memory corruption when
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
- [PATCH 22/25] DOC: minor fix on {sc,src}_kbytes_{in,out}
- [PATCH 23/25] DOC: fix alphabetical sort of converters
- [PATCH 24/25] BUG/MAJOR: http: correctly rewind the request body
- [PATCH 25/25] DOC: remove references to CPU=native in the README
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
this patch series mainly fixes a lot of reported issues in conjuction with
abstract socktet handling, improved the docs about the stats
- [PATCH 13/21] BUILD: http: fix isdigit & isspace warnings on Solaris
- [PATCH 14/21] BUG/MINOR: listener: set the listener's fd to -1 after
- [PATCH 15/21] BUG/MEDIUM: unix: failed abstract socket binding is
- [PATCH 16/21] MEDIUM: listener: implement a per-protocol pause()
- [PATCH 17/21] MEDIUM: listener: support rebinding during resume()
- [PATCH 18/21] BUG/MEDIUM: unix: completely unbind abstract sockets
- [PATCH 19/21] DOC: explicitly mention the limits of abstract
- [PATCH 20/21] DOC: expand the docs for the provided stats.
- [PATCH 21/21] BUG/MEDIUM: backend: Update hash to use unsigned int
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
- [PATCH 10/12] MINOR: stats: fix minor typo in HTML page
- [PATCH 11/12] BUG/MEDIUM: unix: do not unlink() abstract namespace
- [PATCH 12/12] DOC: provide an example of how to use ssl_c_sha1
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
- [PATCH 7/9] BUILD: remove TODO from the spec file and add READM
- [PATCH 8/9] MINOR: log: make MAX_SYSLOG_LEN overridable at build time
- [PATCH 9/9] MEDIUM: log: support a user-configurable max log line
length
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
- BUG/MINOR: ssl: Fix external function in order not to return a pointer
on an internal trash buffer
- BUG/MINOR: counters: do not untrack counters before logging
- BUG/MAJOR: sample: correctly reinitialize sample fetch context before
calling sample_process()
- MINOR: stick-table: make stktable_fetch_key() indicate why it failed
- BUG/MEDIUM: counters: fix track-sc* to wait on unstable contents
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
Bugs from 1.5.0 can cause file descriptor leak, results in the
impossibility to accept new connections after some time.
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
the upstream_check and proxyprotocol module need NGINX_SSL. So remove them
from default and add the according dependence.
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
This should fix isse #54. It should no not be possible to select an
nginx subpackage without the appropriate module.
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
This adds the prosody package from the old svn tree. Ive updated
the licensing information and will maintain the package in the
future. This request also updates prosdoy to the latest version 0.9.4.
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
This adds the nginx package from the old svn package fee. I adopt
the licensing information and will maintain the package in the future.
This request also updates nginx to the last stable version 1.4.7. It further
adds support for
- naxsi (the ngix web application firewall)
- syslog module
- http upstream check module
- support for the haproxy Proxy Protocol (this way nginx can see the real
ip address behind haproxy)
Building was tested with target x86_64, ar71xx and avr32.
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
This adds the memcached package from the old svn package fee. I adopt
the licensing information an will maintain the package in the future.
This request also updates memcached to the last stable version 1.4.20.
Building was testet with target x86_64, ar71xx and avr32
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
- includes support for SSL Termination, Compression Offloading, OCSP
Stapling support and much more
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
openssh-sftp-server is actually a tiny binary that has nearly no dependencies:
$ mips-openwrt-linux-objdump -x sftp-server | grep NEEDED
NEEDED libgcc_s.so.1
NEEDED libc.so.0
Stripping its DEPENDS allows building a system with SFTP support, without
pulling in OpenSSL.
support for opentracker was suggested in ticket #7023
it's much tighter than cbtt and got only 20% of cbtt binary size
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adjust package version and release to reflect upstream compatibility,
replace deprecated uci_get_state with network_get_device.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
This is a port from old packages repo with the following improvements:
- allow to select multiple addresses and ports to listent to
- support both address- and name-based ACLs
(note: config option has been changed from "allow" to "allow_address", "allow_name")
- support more optionf for LUNs
- support various device types (disk, cd, sg passthrough)
- bind accounts to multiple targets
- use uci_validate_section in the init script
- improve error reporting, use logger instead of echo
- set number of IO threads to 2 by default (affects memory footprint)
- configure keepalive
- update to 1.0.48
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
This is actively maintained, and will continue to be maintained.
Upstream development versions of the package is available at
https://github.com/remakeelectric/owrt_pub_feeds
Signed-off-by: Karl Palsson <karlp@remake.is>
