LEDE now provides libncursesw by default [even for libncurses].
No need to keep this patch around.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Python comes with it's own builtin libffi lib, which
seems easier to use for the host build, than trying
to use the one from the package feeds.
Also, dropping `005-fix-libffi-x86-64-configure.patch`
Not needed anymore.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
I just found out that, that the BUILD_VARIANT var
is not set for the host build, so technically this code
would never get used.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
As both LEDE and OpenWrt have STAGING_DIR_HOSTPKG now, we can start to rely
on it. See 73b7f55424 for more information on
STAGING_DIR_HOSTPKG.
STAGING_DIR_HOSTPKG won't actually be changed before the first LEDE release
(it is equivalent to $(STAGING_DIR)/host), so this simple search/replace
cleanup is safe to apply. Doing this cleanup now will be useful for the
Gluon project (an OpenWrt/LEDE based firmware framework) for experimenting
with modifying STAGING_DIR_HOSTPKG before doing this in the LEDE upstream.
Also fixes a typo in the dbus Makefile ("STAGIND_DIR").
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
STAGING_DIR_HOSTPKG is now defined in both OpenWrt and LEDE, so we can
start to rely on it.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fixes: https://github.com/openwrt/packages/issues/3767
Since commit:
f6e6341d89
libressl is built on the host-side.
Python picks it up [ via the openssl/* headers ] and assumes
it has SSL libs.
Compiling works fine, linking fails.
Doesn't look like it's because:
2fd5ce9488
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Most python packages use the same build rules & vars.
So, adding them in python-package.mk.
Also, preparing for using VARIANTs for python/python3 packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
PYTHON_FOR_BUILD is used to build the target python.
Nomally Python scripts detect fine the Python host interpreter
to use for building the Python target interpreter.
But, let's not leave it up to chance anymore.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
And apparently `--with-system-ffi` does not take any arguments.
But it's only in Python 3.6 that a check was added for that.
After checking, Python 2.7 does not take any args either
for `--with-system-ffi` ; so, remove it [for the case when this
change may get backported].
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Move the python-host.mk and python-package.mk includes after the definition of
common package variables. This is required to ensure that PKG_UNPACK is not set
to to the dummy "true" command which happens if PKG_SOURCE is not yet set.
Fixes the following error observed while attempting to build Python on a recent
LEDE version:
make[2]: Entering directory '.../lang/python'
true
[ ! -d ./src/ ] || cp -fpR ./src/* .../Python-2.7.12
Applying ./patches/001-enable-zlib.patch using plaintext:
can't find file to patch at input line 14
Perhaps you used the wrong -p or --strip option?
[...]
Patch failed! Please fix ./patches/001-enable-zlib.patch!
Makefile:242: recipe for target '.../Python-2.7.12/.prepared_...' failed
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
--sysconfigdir and --sbindir are obtained from --prefix
and --exec-prefix, so no need to have them explicitly
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Allows for more granularity with respect to python-host.mk
and python-package.mk inclusions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
So that it can be included twice.
python-package.mk include python-host.mk, but at some point
in time python-host.mk is not exported to staging_dir yet.
So, to have in python's Makefile, we need to include it
in the Makefile, and to prevent double inclusion (if
python-host.mk is exported from a previous build), the
include guard is added.
Also, moved the includes after some vars were set.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Currently, the python-host.mk framework relies on HOST_BUILD_PREFIX to
refer to the $(STAGING_DIR)/host directory but using the HOST_BUILD_PREFIX
variable requires the use of include/host-build.mk which in turn includes
python-host.mk, leading to target redefinition errors.
In order to provide a global, uniform way to refer to the host staging
directory, LEDE introduced a new variable STAGING_DIR_HOSTPKG which points
to $(STAGING_DIR)/host for now with the purpose of eventually being able to
relocate that directory in the future.
This commit changes python-host.mk to ...
- stop including include/host-build.mk (revert of #3423)
- replace usages of $(HOST_BUILD_PREFIX) with $(STAGING_DIR_HOSTPKG)
- warn and fallback to $(STAGING_DIR)/host if STAGING_DIR_HOSTPKG is
unavailable
The fallback code will ensure that the python host build infrastructure
continues to work properly on older OpenWrt and LEDE versions until the
STAGING_DIR_HOSTPKG is fully settled in and can be removed some time
in the future.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Also, override all prefix args in the HOST_CONFIGURE_ARGS
so that this works fine on CC/15.05.
There are some changes in core regarding package builds that
require this.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
It seems that this can become an issue.
Found when building python3-setuptools from packages/trunk
in openwrt/15.05.
python3-setuptools is not in packages/for-15.05
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The sets host Python's prefix and exec-prefix to the same value
($(STAGING_DIR)/host for packages, as currently defined in
include/host-build.mk), which avoids the case where pyconfig.h is
not in the same location as Python's other header files (see
https://bugs.python.org/issue896330).
This also removes some cross compilation workarounds
(_python_sysroot/prefix/exec_prefix, disabling byte-compilation,
__PYVENV_LAUNCHER__) that are not necessary when compiling packages
for host.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
AFAIK sysroot is combined with prefix/exec_prefix, so sysroot shouldn't
include "/usr". (cf. the HostPython function in older versions of
python-package.mk)
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This adds code to make it easier to build third-party python
modules such as ones from PyPi.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Seems those pkgconfig file paths were revealed to be incorrect
after doing a full clean build.
And I only had to inspiration to do one after doing the initial PR.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
And split python-dev and python-lib2to3 packages.
Seems for python3 this was done, so we'll sync here.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
That means basically moving the host Python from $(STAGING_DIR_HOST)
to $(STAGING_DIR_HOST)/usr and making the PYTHONPATH var
as an argument.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Some python packages (e.g. cffi) compile one or more shared libraries
as part of their setup process. When these packages are setup
dependencies of other packages (e.g. cryptography), these packages (and
their shared libraries) will need to be loaded on the host system.
This adds a makefile, similar to python-package.mk, to simplify
installing python packages on the host.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Since 94f87dc1, host build of Python depends on expat installed in host
staging directory. However, pyexpat extension fails to build if expat
was not built and installed to staging dir before - adding host build
dependency should fix this.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Build depends must refer to the source package name, not the binary one,
therefore we need to use `bzip2` in order to enforce a build of libbz2.so.
Also make the host python build depend on the bzip2 host build in order to
ensure that host python is built with bzip2 support. We don't need a build
dependency for the target python as this already depends on +libbz2 through
python-light. That package dependency in turn implies a build dependency.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Patch removing multiarch paths from build should be applied only when
Python is built for target, but not for host. When the paths are removed
during host build, host python throws some ugly errors when importing
some hashlib modules. Also it reports that modules crypt and nis failed
to build (tested on Ubuntu 14.04 host).
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
python-package.mk now defines (extends) CONFIGURE_ARGS that are
adjusting PREFIX and EXEC_PREFIX in distutils.sysconfig during
compilation. These variables are sometimes used by autotools to detect
path to Python header files. Adding these variables to python-package.mk
fixes compilation of legacy autotools-configured packages that already
include python-package.mk and do not overwrite CONFIGURE_ARGS.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Rule of thumb is: any Python file that is greater than 100kb
(or adds a dependency with which it adds more than 100 kb)
should be a pretty useful/commonly used lib to stay in `python-light`.
An example, is the Python IO lib, which summarized (Python source +
binary module) is over 200kb.
Also moved some files that should have been put into previously
existing packages before, and re-organized the packages a bit.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Seems removing the PyPackage rule and/or adding dummy install rule
causes some issues inside the build-system, where the libpython2.7.so.1.0
is not seen by packages that depend on python.
Even though that libpython2.7.so.1.0 file is installed properly by `python-base`.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Calling `PyPackage` will install some default install rules for
python packages that are not required for the `python` package specifically
are not required.
That will lead to some conflicts with `python-light` because the
`/usr/lib/python2.7/site-packages` folder (+contents) will be
available in both packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
When cross-compiling, we do not need to add runtime lib dirs.
Also, the cross compilers that are used on OpenWRT do not support
the '-R' option, which causes build failures.
These build failures existed before, but were not noticed,
because it fails only on some setups.
This is because Python's `setup.py` does a lot of voo-doo
automagic that needs handling for some cross-compilation cases.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Packetize some Python modules to reduce size of the overall Python package.
Basically, a new package is introduced, call `python-light`,
and everything that's extra (or big) is put in other packages.
The `python` package becomes a metapackage that installs `python-light`
along with the rest of the packages.
Base work started by Jan Čermák.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
When distutils are copying scripts, path to Python interpreter is adjusted.
This does not work well in OpenWrt buildroot, because the path is adjusted
to absolute path to host Python then. This patch simply disables the
adjusting of the path.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Try to reduce the amount of change in this patch, since it removes
a lot of stuff, when we could just 'ifdef' that stuff out, with 2 lines.
The buildroot project does something similar like this:
http://git.buildroot.net/buildroot/tree/package/python/005-pyc-pyo-conditional.patch
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This module is not necessary in OpenWrt because the functionality it
provides (i.e. installation of setuptools and PIP) is ensured by
python-pip and python-setuptools packages.
See: https://docs.python.org/2.7/library/ensurepip.html
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Seems when cross compiling on x86_64 Debian (most likely Ubuntu too)
the host's paths will be added too causing build failures for some extensions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Python packs some pip installation script during the build,
which looks like a better idea to use for the python-pip
and/or python-setuptools packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
That would allow for files (in filespecs) to be indented.
As it is now, the files need to be added at the begginning of the line.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Seems that using += adds a space in the PYTHONPATH.
Could be some other error, but at least this way
it's sure to not leave any spaces.
Thanks @Xuefer.
Signed-off-by: Xuefer Tinys <xuefer@gmail.com>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Some symbols are not found (tgetnum and BC).
Looks like the termcap lib, which should be in libncurses(w)
but maybe some build param would be required.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Redefine python-full as all-pages-minus-a-few-that-don't make sense.
Remove all other packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This fix is quite critical since it fixes copying the libpython shared lib.
The previous source folder we've used is ok, it has the shared lib,
but libpython2.7.so is not a symlink of libpython2.7.so.1.0, but
rather a copy of it.
Which means that libpython2.7.so takes twice as much space
on the target's flash.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Python's build scripts prefer ncursesw, and if it is detected
it will be used.
The problem will occur when linking, since ncursesw libs may not be
installed if not added as deps, but the sources will be compiled
against ncursesw.
Reference from Python's HISTORY file:
Patch #1428494: Prefer linking against ncursesw over ncurses library.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This mostly helps to avoid confusion when modules are cross-compiled.
Otherwise build folders are named with the host's platform name.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This will reduce the bloat when users will want to compile in their
Python C extensions.
There will be a initial bloat (several kb) if just Python
is installed, but that will be compensated when users will add more
C extensions.
During the build we also have to add Python's PKG_BUILD_DIR
so that the shared lib is found when compiling Python's
built-in C extensions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The target's PYTHON_INC_DIR should take precedence over the host's
include dir when cross-compiling.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Seems that the Python C extensions were being
(or at least trying to be) build using '/usr/include' as the first
include folder.
Seems this issue was already fixed on MacOS X and now we've extended
it for our case.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Seems that this allows some goofs, because some files
silently do not get copied and the build succeeds, even though
it shouldn't.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Seems that if you add a package folder this would also
include the compiled python files which increases fw size.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
According to PEP394 (http://legacy.python.org/dev/peps/pep-0394/)
the 'python' command should refer to 'python2'.
In our case, this means we should reboot the old python package.
We could rename the package name to python2, but that would
just complicate things a bit with other packages, and
since we're doing this reboot, such a complication would be
unnecessary.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Some notes:
- Python 3 (at least version 3.4) is pretty cross-compiler-friendly,
so a lot of patches were thrown away.
- Arguments below were moved to ./files/config.site file, and disabled
ac_cv_have_chflags=no \
ac_cv_have_lchflags=no \
ac_cv_py_format_size_t=no \
ac_cv_have_long_long_format=yes \
ac_cv_buggy_getaddrinfo=no \
- --without-ensurepip added, because the build wants to ensure that
it works; that's a good idea, but for now, it requires special
setup, and we can do that later
- --without-pymalloc added, becase in Python 3, modules are suffixed
with m; e.g. so some paths are python3.4m instead of python3.4
all this is detailed here:
http://legacy.python.org/dev/peps/pep-3149/
Maybe it will be a good idea to re-add this back
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Make python-mini the top-level and default Python package.
Make the other packages subpackages of the top-level python package.
Make old python package the python-full package.
Note: at this point, this package can be split/renamed to
python-legacy should anyone need Python 2. After this commit
it's going to be Python 3 all the way.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
