gcc complains about atexit() being implicitely defined in
xl2tpd-control.c
Fix that by including stdlib.h in xl2tpd-control.c
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Yousong Zhou <yszhou4tech@gmail.com> made a couple of useful fixes
mostly for the xl2tpd-control tool which was broken.
imported them (patches/2*) here.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fix Makefile to force compression of tld_names.dat reported in OpenWrt Ticket 19597
* change default of retry_count to "0" (retry endless) suggested by Henning Schild
* updated tld_names.dat include changes until 07.05.2015
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
It used to require 1+ IPv4 addresses to start on Linux. Now it starts
up with 0 addresses (of any type), as netlink can provide us more
later. This way, no stupid restart loop with procd if it is racing
with netifd at startup.
Signed-off-by: Steven Barth <steven@midlink.org>
[RELEASE] Released version 1.5.12
Released version 1.5.12 with the following main changes :
- BUG/MINOR: ssl: Display correct filename in error message
- DOC: Fix L4TOUT typo in documentation
- BUG/MEDIUM: Do not consider an agent check as failed on L7 error
- BUG/MINOR: pattern: error message missing
- BUG/MEDIUM: pattern: some entries are not deleted with case insensitive match
- BUG/MEDIUM: buffer: one byte miss in buffer free space check
- BUG/MAJOR: http: don't read past buffer's end in http_replace_value
- BUG/MEDIUM: http: the function "(req|res)-replace-value" doesn't respect the HTTP syntax
- BUG/MEDIUM: peers: correctly configure the client timeout
- BUG/MINOR: compression: consider the expansion factor in init
- BUG/MEDIUM: http: hdr_cnt would not count any header when called without name
- BUG/MEDIUM: listener: don't report an error when resuming unbound listeners
- BUG/MEDIUM: init: don't limit cpu-map to the first 32 processes only
- BUG/MEDIUM: stream-int: always reset si->ops when si->end is nullified
- BUG/MEDIUM: http: remove content-length from chunked messages
- DOC: http: update the comments about the rules for determining transfer-length
- BUG/MEDIUM: http: do not restrict parsing of transfer-encoding to HTTP/1.1
- BUG/MEDIUM: http: incorrect transfer-coding in the request is a bad request
- BUG/MEDIUM: http: remove content-length form responses with bad transfer-encoding
- MEDIUM: http: restrict the HTTP version token to 1 digit as per RFC7230
- MEDIUM: http: add option-ignore-probes to get rid of the floods of 408
- BUG/MINOR: config: clear proxy->table.peers.p for disabled proxies
- MINOR: stick-table: don't attach to peers in stopped state
- MEDIUM: config: initialize stick-tables after peers, not before
- MEDIUM: peers: add the ability to disable a peers section
- DOC: document option http-ignore-probes
- DOC: fix the comments about the meaning of msg->sol in HTTP
- BUG/MEDIUM: http: wait for the exact amount of body bytes in wait_for_request_body
- BUG/MAJOR: http: prevent risk of reading past end with balance url_param
- DOC: update the doc on the proxy protocol
Signed-off-by: heil <heil@terminal-consulting.de>
seccomp is only supported on x86, amd64 and arm in tor.
This deactivated it currently completely which should close#935,
#1097, #1147 and #1161.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This adds a patch for ser2net, so that ser2net can be configured
to flash leds on serial traffic. This could -for example- be used
to have an activity indicator, like netdev trigger.
Internally, the linux kernel's 'transient' led trigger is used.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Updated the package to the latest upstream version.
Removed a patch that was merged upstream.
Bumped copyright notice to 2015.
Signed-off-by: Martin Rowe <martin.p.rowe@gmail.com>
This commit brings back Wifidog from the oldpackages
repository.
Changes:
* Wifidog version 1.2.1
* Add wifidog-tls package
* Init script uses procd
Signed-off-by: Michael Haas <haas@computerlinguist.org>
Inspired by OpenWrt Ticket System Ticket 9119
Python3 package currently marked as @BROKEN because no time for testing.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
As Hnyman noted in https://github.com/dtaht/ceropackages-3.10/issues/13
we carry a few unnecessary dependecies in sqm-scripts, so remove one of
them (iptables-mod-filter) as we neither use it nor plan to use it.
Signed-off-by: Sebastian Moeller <moeller0@gmx.de>
- update to latest version (v1.0.16)
- add license info
- add myself as maintainer
- install dev files the proper way in Build/InstallDev
- rename sctp package to libsctp
- add an sctp-tools package and an sctp transitional meta package
Signed-off-by: Nicolas Thill <nico@openwrt.org>
- [PATCH 3/9] BUG/MEDIUM: Do not consider an agent check as failed on
- [PATCH 4/9] BUG/MEDIUM: peers: correctly configure the client timeout
- [PATCH 5/9] BUG/MEDIUM: buffer: one byte miss in buffer free space
- [PATCH 6/9] BUG/MAJOR: http: don't read past buffer's end in
- [PATCH 7/9] BUG/MEDIUM: http: the function "(req|res)-replace-value"
- [PATCH 8/9] BUG/MINOR: compression: consider the expansion factor in
- [PATCH 9/9] BUG/MEDIUM: http: hdr_cnt would not count any header when
Signed-off-by: heil <heil@terminal-consulting.de>
* fix problem with lucihelper script reported in OpenWrt Ticket 19419
* rewritten split_FQDN fixing detection errors and using zcat
* updated tld_names.dat and .gz compressed to save space
* add LoopiaDNS (loopia.se) to services_ipv6
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Alarm Pinger (apinger) is a little tool which monitors various IP devices by
simple ICMP echo requests. There are various other tools, that can do this,
but most of them are shell or perl scripts, spawning many processes, thus much
CPU-expensive, especially when one wants continuous monitoring and fast
response on target failure.
Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
Some VPN servers might be configured in a way that a CSD wrapper script
is mandatory to complete the authentication process, allow that to be
specified for openconnect.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Some servers might be implementing ACLs based on the value specified by
openconnect for "os", allow that to be configured.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
- Ensure only valid UTF-8 is passed to libidn. It was found
(CVE-2015-2059) that libidn can read beyond the boundaries of the
provided buffer when an input string contains invalid UTF-8 sequences.
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
This patch removes some autoconf goo which is causing bind to use the host's ar
instead the ar from the toolchain. If they're both elf platforms this is fine,
but it's no good if host is darwin.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
The initial conversion to restart sqm on interfaces it is configured
for in case of (transient) dis- and reappearance was half finished.
These changes clean up the handling of exlicitly passed interfaces
in run.sh: no second argument defaults to all configured interfaces
the alternative is an individual interface name passed as 2nd
argument to run.sh. The first argument either is start or stop.
No argument at all will behave as if start was passed.
Survives light testing...
Signed-off-by: Sebastian Moeller <moeller0@gmx.de>
Alan Jenkins noted a bug in the smq luci GUI that effectively
erased several configuration paramters if two checkboxes were deselected.
This behaviour seems consistent in luci but certainly has the potential
to confuse users. While confusion can not really be avoided generally
it seems wise to change the default interpretation for empty or non-existent
itarget and etarget variables from the qdisc's default (5ms in the case of
one of the codels) to automatic determination of tghis variable dependent on
the configured bandwidth, as codels target variable should be large enough
to contain at least one full packet. With this change sqm-scripts will
do the right thing by default, but will yet allow the user to specify
over-ridding values (as long as the user does not un-check the
entry-field exposing check boxes). Survives light testing...
This change set also changes the sqm-scripts luci gui to note the user
of the change. For compatibility with existing setups sqm-scripts
will still honor "auto" as an alternative explicit way of requesting
automatic target selection. This might turn into a warning in the future
and might be phased out...
Signed-off-by: Sebastian Moeller <moeller0@gmx.de>
Package ethtool is missing dependencies for the following libraries:
libssp.so.0
Makefile:45: recipe for target '/home/zero/development/openwrt/bin/ar71xx/packages/packages/ethtool_3.18-1_ar71xx.ipk' failed
Signed-off-by: Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
From: Michael Haas <haas@computerlinguist.org>
* init script no longer creates certificates (consider client mode as use
case)
* patches/010_fix_getnameinfo.patch: Fix getnameinfo signature
* patches/011_disable_ssp_linking.patch: Disable -fstack-protector as it
is not always available in OpenWRT
* old patches (in oldpackages) no longer necessary
* remove libwrap dependency
* remove libpthread dependency
* respect CONFIG_IPV6
* init script uses procd
* sample stunnel.conf runs in client mode - prevents start failure,
does not require cert
Possible enhancement: automatically generate certificate as done in
uhttpd. However, as client mode is a possible use case, I'd rather not.
Additionally, stunnel may use several certs with user-defined locations
and we can't easily set a cert location via command-line args.
The package is based on
https://sites.google.com/site/twisteroidambassador/openwrt/stunnel
Signed-off-by: Michael Haas <haas@computerlinguist.org>
This patch add a new package, git-http, that contains all
http related commands (and ftp as extra). All http/ftp
depends on libcurl. Even without SSL suport in libcurl,
git compiles and it returns an informative error only
at runtime.
The use of symlinks now are trigged using NO_INSTALL_HARDLINKS env
and not based only on Makefile patch.
imap-send was kept builtin and idependent of curl (just as it was
before)
Template files, which are not necessary, where removed.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Previously, ./configure was running checking local system and not
OpenWRT target. This would avoid any configure test about OpenWRT
libraries.
With a patch in configure, non cross-compiling-friend test are
ignored and Makefile can use default configure.
As side effect, git commands are now at /usr/lib/git-core and not
/usr/libexec/git-core.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
