No need to keep it in kernel specified folder anymore.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19069
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The script always gets passed the package name, not the source name.
Optimize for the default case where the package name matches the
filename prefix.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Many x86 machines can boot from SD cards, and some embedded x86 devices
come with an eMMC. Include drivers for all common MMC/SDHCI controllers
to allow booting from SD/MMC on x86.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Directly call the function "get_linux_version()" to get the integer
kernel version number.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19172
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
A new function "get_linux_version()" to normalize and print the
kernel version as an integer. In some migration scripts, it is
useful for checking the Linux kernel version.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19172
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently, if OEM recovery flashes OpenWrt to second ubi1,
OpenWrt cannot boot. With this commit, recovery image is built
with initramfs kernel, so that it can boot from either ubi or ubi1.
This adds an extra step to OpenWrt installation from OEM:
user needs to sysupgrade from initramfs to full system.
Signed-off-by: Mateusz Krzak <kszaquitto+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18878
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The number of serial interfaces for the chip 8250 can be configured at
build time. This is currently not configurable and is always set to 16
interfaces. This is too little for some small embedded devices and too much
for others (x86_64). Therefore, this commit creates the possibility to set
this at compile time.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/19217
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Host default environment doesn't provide/require gnutls headers needed
for building mkeficapsule tools, and as tegra target doesn't require EFI
capability, disable the build of mentioned tool.
Fixes: 92cd360aac ("uboot-tegra: bump version to 2025.04")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250713125126.215092-1-tmn505@terefe.re/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
8mA driving will cause overshoot issue on SPI NAND. Change it to 4mA.
- Reference:
003744197a
On Linux mainline (mt7986.dtsi), spi's source clock is: clocks = <&topckgen CLK_TOP_MPLL_D2>, which is
208MHz. Usable clock division will be:
- 208/4=52MHz
- 208/6~=35MHz
- 208/8=26MHz
and so on
If we specify 50MHz for spi-max-frequency, it will actually run under about 35MHz. Most SPI NAND & NOR
flashes are capable of running with more than 52MHz, include Micorn MT29F4G01ABAFDWB on ZyXEL EX5601.
[Ref: #18752] To reach highest performance on mt7986, use spi-max-frequency = <520000000>. Basically,
this setting should work on all mt7986 PCBs since most mt7986 boards follow reference design. However,
other boards needs further test to guarantee stability.
Signed-off-by: Sky Huang <SkyLake.Huang@mediatek.com>
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/18813
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add new option to bootmenu which allows to boot the system from USB.
You can use dd to prepare USB with initramfs:
- dd bs=1M if=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-factory.ubi of=/dev/sdX
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18949
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In rtl931x_led_init, the number of leds per port is not properly set. It
currently uses a hardcoded value of 1 which seems to be taken initially
from a specific device. This hardcoded value assumes any port always has
exactly two leds.
The RTL930x variant - rtl930x_led_init - does a better job at this. So
take it and use it for RTL931x too with the corresponding register.
While at it, rename the function to a proper naming scheme.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19241
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Use common function ubootenv_add_mmc
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19269
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The direction needs to be included in the IOCTL call.
Fixes: b91d7d9d78 ("ltq-*-app: extend ubus metrics/statistics")
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/19363
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These cpu erratums are used by other SoCs, just remove them.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19380
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These cpu erratums are used by other SoCs, just remove them.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19380
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move the following kernel symbol configs to generic:
COMPRESSED_INSTALL and IMX_SCMI related configs
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19380
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Dell/SonicWall APL27-0B1 (marketed as SonicPoint ACi) is a dual band
wireless access point. Very similar to already supported APL26-0AE,
which all antennas are external, while this variant has internal
antennas. End of life as of 2022-07-31.
Specification
SoC: QualcommAtheros QCA9550
RAM: 256 MB DDR2
Flash: 32 MB SPI NOR
WIFI: 2.4 GHz 3T3R integrated
5 GHz 3T3R QCA9890 oversized Mini PCIe card
Ethernet: 2x 10/100/1000 Mbps QCA8334
port labeled lan1 is PoE capable (802.3at)
USB: 1x 2.0
LEDs: LEDs: 6x which 5 are GPIO controlled and two of them are dual color
Buttons: 1x GPIO controlled
Serial: RJ-45 port, SonicWall pinout
baud: 115200, parity: none, flow control: none
Before flashing, be sure to have a copy of factory firmware, in case You
wish to revert to original firmware.
Installation
1. Prepare TFTP server with OpenWrt sysupgrade image and rename that
image to "ap135.bin".
2. Connect to one of LAN ports.
3. Connect to serial port.
4. Hold the reset button (small through hole on side of the unit),
power on the device and when prompted to stop autoboot, hit any key.
The held button can now be released.
5. Alter U-Boot environment with following commands:
setenv bootcmd bootm 0x9F110000
saveenv
6. Adjust "ipaddr" (access point, default is 192.168.1.1) and "serverip"
(TFTP server, default is 192.168.1.10) addresses in U-Boot
environment, then run following commands:
tftp 0x80060000 ap135.bin
erase 0x9F110000 +0x1EF0000
cp.b 0x80060000 0x9F110000 $filesize
7. After successful flashing, execute:
boot
8. The access point will boot to OpenWrt. Wait few minutes, until the
wrench LED will stop blinking, then it's ready for configuration.
Notes
By default no power is provided on USB port, so attached USB devices
won't enumerate. To change that enable regulator with:
echo "enabled" > /sys/devices/platform/output-usb-vbus/state
To disable power write "disabled" to the same file.
Ther regulator state will reset on reboot, consider running this command
on hotplug event or add it to /etc/rc.local. The hotplug event should
look like this:
if [ "${PRODUCT}" = "1d6b/2/606" ] && [ "${ACTION}" = "add" ]; then
echo "enabled" > /sys/devices/platform/output-usb-vbus/state
fi
Place it in /etc/hotplug.d/usb/10-usb-power.
Known issues
Initramfs image can't be bigger than specified kernel size, otherwise
bootloader will throw LZMA decompressing error. Switching to lzma-loader
should workaround that.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250529202033.28250-2-tmn505@terefe.re/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Allows to enable/disable attached regulators from userspace, i.e. by
simply writing value to a sysfs exported state file. Useful in case of
USB port VBUS toggled by GPIO.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250529202033.28250-1-tmn505@terefe.re/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Unfortunately they still apear with prolonged serial console usage.
While it's not common to use serial console past initial setup, alas
when the condition is hit the console is almost unusable.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250618170045.473711-2-tmn505@terefe.re/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
9f48a8abb2b2 Remove advisories from release branch
0a7c7a3e283a NEWS: start new section
bdccbfbc52d3 math: Fix log10p1f internal table value (BZ 32626)
d85a7719536f math: Fix sinhf for some inputs (BZ 32627)
cb7f20653724 nptl: Correct stack size attribute when stack grows up [BZ #32574]
cf88351b685d math: Fix tanf for some inputs (BZ 32630)
69fda28279b4 assert: Add test for CVE-2025-0395
1e0e33e1b19a Fix tst-aarch64-pkey to handle ENOSPC as not supported
a900dbaf70f0 x86 (__HAVE_FLOAT128): Defined to 0 for Intel SYCL compiler [BZ #32723]
2cb04444b934 math: Fix `unknown type name '__float128'` for clang 3.4 to 3.8.1 (bug 32694)
07288c7445bb math: Add optimization barrier to ensure a1 + u.d is not reused [BZ #30664]
30992cb5e9d7 RISC-V: Fix IFUNC resolver cannot access gp pointer
7c9a0868077c Aarch64: Improve codegen in SVE asinh
94859e86807a Aarch64: Improve codegen in SVE exp and users, and update expf_inline
f3d9c116cb0a AArch64: Improve codegen for SVE erfcf
2025e27a817f AArch64: Improve codegen for SVE pow
7774a9d07ab2 AArch64: Improve codegen for SVE powf
6d1f97bb0667 aarch64: Add configure checks for GCS support
fda5730898bc aarch64: Add tests for Guarded Control Stack
61ba3cdfa9e9 aarch64: Add GCS tests for transitive dependencies
8d98ee8d70cd aarch64: Add GCS tests for dlopen
009c5a2dca7c aarch64: Add GCS test with signal handler
e0bc5f64eaf7 math: Improve layout of exp/exp10 data
c47c3890f15e AArch64: Add SVE memset
89be78704ed8 AArch64: Use prefer_sve_ifuncs for SVE memset
56609f8df1fa Pass -Wl,--no-error-execstack for tests where -Wl,-z,execstack is used [PR32717]
746ef8e93964 static-pie: Skip the empty PT_LOAD segment at offset 0 [BZ #32763]
fd202462c5f8 elf: Check if __attribute__ ((aligned (65536))) is supported
91f8cff2c48f configure: Fix spelling of -Wl,--no-error-execstack option
1a3083b99992 posix: Move environ helper variables next to environ definition (bug 32541)
66fc3bd75871 math: Remove an extra semicolon in math function declarations
33bfd9020fda Linux: Remove attribute access from sched_getattr (bug 32781)
e22c132484ea nptl: clear the whole rseq area before registration
98c712855d66 nptl: PTHREAD_COND_INITIALIZER compatibility with pre-2.41 versions (bug 32786)
ce9b765522f0 nptl: Check if thread is already terminated in sigcancel_handler (BZ 32782)
6a3a4a5e583a x86_64: Add tanh with FMA
7e72fa7577f2 x86_64: Add sinh with FMA
bcd4cf9d5ff2 x86_64: Add atanh with FMA
a282e2c0aee8 x86: Skip XSAVE state size reset if ISA level requires XSAVE
80cd6566496e x86: Use separate variable for TLSDESC XSAVE/XSAVEC state size (bug 32810)
200d20123cb8 x86: Link tst-gnu2-tls2-x86-noxsave{,c,xsavec} with libpthread
b861755a84ee elf: Extend glibc.rtld.execstack tunable to force executable stack (BZ 32653)
d6d56af6e78c elf: Fix arm-linux-gnueabihf build break from b861755a84
f68b407d4bc5 x86: Optimize xstate size calculation
aca31d27123d x86: Add ARL/PTL/CWF model detection support
a53e76465791 x86: Handle unknown Intel processor with default tuning
046b33800c3e x86: Detect Intel Diamond Rapids
5cb575ca9a3d elf: tst-audit10: split AVX512F code into dedicated functions [BZ #32882]
5b4c4617016d nptl: Fix pthread_getattr_np when modules with execstack are allowed (BZ 32897)
5cf17ebc659c hurd: Fix tst-stack2 test build on Hurd
dab44a3b2bb5 elf: Keep using minimal malloc after early DTV resize (bug 32412)
2ca34d76270d support: Use const char * argument in support_capture_subprogram_self_sgid
624285af3bfc elf: Test case for bug 32976 (CVE-2025-4802)
899dd3ab2fc2 x86_64: Fix typo in ifunc-impl-list.c.
515d4166f4db elf: Fix subprocess status handling for tst-dlopen-sgid (bug 32987)
d952c6efaa87 sparc: Fix argument passing to __libc_start_main (BZ 32981)
84bdbf8a6f2f ppc64le: Revert "powerpc: Optimized strncmp for power10" (CVE-2025-5745)
55cdcadf7306 ppc64le: Revert "powerpc: Fix performance issues of strcmp power10" (CVE-2025-5702)
b48d7ab03643 ppc64le: Revert "powerpc : Add optimized memchr for POWER10" (Bug 33059)
0c76c951620f ppc64le: Revert "powerpc: Optimized strcmp for power10" (CVE-2025-5702)
61e461ed0c16 sparc: Fix sparc32 Fix argument passing to __libc_start_main (BZ 32981)
11e634ccf32e support: Pick group in support_capture_subprogram_self_sgid if UID == 0
6e489c17f827 Fix error reporting (false negatives) in SGID tests
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely:
- configuration flag "--enable-crypt" is obsolete and removed
- patch "050-Revert-Disallow-use-of-DES-encryption-functions-in-n.patch"
does not matter anymore
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The bootup of the armsr target sometimes failed like this:
```
[ 0.762283] NET: Registered PF_INET6 protocol family
[ 0.791987] workqueue: Failed to create a worker thread: -EAGAIN
[ 0.801986] workqueue: Failed to create a rescuer kthread for wq "mld": -EAGAIN
[ 0.964017] NET: Unregistered PF_INET6 protocol family
```
Increase the maximum number of threads the kernel allows.
Link: https://github.com/openwrt/openwrt/pull/19376
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
