Commit graph

1814 commits

Author SHA1 Message Date
Jeffery To
4f115606ab CI: Run "apt-get update" before installing signify-openbsd
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit 89cf0d5619)
2023-09-01 21:56:58 +02:00
Van Waholtz
86f308dcc7 CI: Enable runtime_test for mips_24kc
Signed-off-by: Van Waholtz <brvphoenix@gmail.com>
(cherry picked from commit 28d204148a)
2023-09-01 21:56:47 +02:00
Gerard Ryan
ca620495d3 cache-domains: added pre-test.sh CI step
Some packages variants have conflicting dependencies with the
base packages and the CI test will fail to install before anything
can be done by the packages to setup the system for install.

This change adds a pre-test.sh that runs before the install so things
like the default libustream variant can be swapped out as shown in the
updated cache-domains.

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
(cherry picked from commit 61997c86b0)
2023-09-01 21:56:39 +02:00
Jeffery To
9f7ba4a4b5 CI: Add local feed for CI-built packages
To test each package, the CI-built target package (ipk) file is
installed, but currently the target package's dependencies are installed
from the standard opkg feeds.

There are cases when the CI-built target packages should be
installed/tested together:

* If a pull request contains several new packages that depend on each
  other, the test step will fail as the new dependencies cannot be found
  in the current packages feed.

* If a pull request upgrades a source package that builds several target
  packages that depend on each other, the test step may fail due to the
  version/ABI mismatch between a newer target package and the older
  dependencies installed from the packages feed.

This sets up a local feed for the CI-built packages so that dependencies
are also installed from the same set of packages.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit f818fe716e)
2023-09-01 21:56:26 +02:00
Jeffery To
ac03feb20f CI: Add --autoremove, ignore removal errors
836b4e1c734f9705bfd8db0da0c04214c2647932 added
--force-removal-of-dependent-packages but it does not do what the commit
message says it does.

When package A depends on package B (package B is a dependency of
package A; package A is a dependent of package B), trying to remove
package B while package A is installed will result in an error. Adding
--force-removal-of-dependent-packages in this case will cause the
removal of package B and package A (package B's dependent).

But in the case of the CI testing step, it is package A that is being
installed and removed. Removing package A with
--force-removal-of-dependent-packages will not cause package B (package
A's dependency) to be removed.

This adds --autoremove to actually remove the package's dependencies.

This also ignores any errors returned by opkg remove as --autoremove can
sometimes falsely return an error[1].

[1]: https://github.com/openwrt/openwrt/issues/12241

Fixes: 836b4e1c734f ("github-ci: add --force-removal-of-dependent-packages")
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit 53a53b8ee3)
2023-09-01 21:56:15 +02:00
Tianling Shen
9fb0ed26c4 CI: update build architectures
Removed arc_archs - archs38 was marked as source-only [1].
Renamed powerpc_8540 to powerpc_8548 [2].

1. https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c01641bcc7236d2e2de3ea65444b0cf2898df351
2. https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=2cad88b99fdae9766de84e6c1cb56f111eb53748

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 7928f7d399)
2023-09-01 21:56:02 +02:00
Paul Spooren
dce4a4ca52 ci: only comment AUTORELEASE deprecation if exists
If it doesn't exists, don't confuse the contributors.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit b3b01af314)
2023-09-01 21:55:50 +02:00
Paul Spooren
42584b0cec CI: deprecate $(AUTORELEASE) via comments
Autorelease causes some issues like heavy bandwidth usage as well as
non-deterministic package releases whenever someone doesn't use the full
git log.

With this comment all modified packages are checked and if they use
the autorelease feature, kindly comment to the user to change that.

Signed-off-by: Paul Spooren <paul.spooren@rhebo.com>
[ move check to separate workflow to handle ci limitation ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit c993ee8a89)
2023-09-01 21:55:43 +02:00
Josef Schlehofer
120bf33284 ci: change default packages
Since this file was taken from packages repository, it tries to compile
packages from that repository as fallback if changes are not detected.

Let's change these packages to some, which are present in this
repository, so they will be compiled as test.

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit c9a8f2d032)
2023-09-01 21:55:27 +02:00
Alois Klink
8e68501e2e github-ci: error on any shell errors
Enable `errexit` and `nounset` [POSIX shell options][1]
in `.github/workflows/entrypoint.sh` so that the script fails
if any command within the script fails.

[1]: https://pubs.opengroup.org/onlinepubs/9699919799//utilities/V3_chap02.html#set

Reported-by: Marius Dinu <m95d+git@psihoexpert.ro>
Fixes: https://github.com/openwrt/packages/issues/19953
Signed-off-by: Alois Klink <alois@aloisklink.com>
(cherry picked from commit 03ca0722f7)
2023-09-01 21:55:16 +02:00
Christian Marangi
b1ca335bf5 ci: update github actions to v3
Update checkout and upload-artifact action to v3 to mute nodejs
deprecation warning.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 52570d4242822e3db678f5484c2ca3e72f485d52)
(cherry picked from commit 5d87b95697)
2023-09-01 21:55:08 +02:00
Jeffery To
fe55760833 ci: Use openwrt/gh-action-sdk@v5
The previous build errors with v5 have been fixed. This version builds
packages as a normal user instead of as root.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit e2d72c5775)
2023-09-01 21:54:45 +02:00
Simon Wunderlich
f47368cba4
Merge pull request #1017 from ecsv/batadv-for-22.03
openwrt-22.03: batman-adv: Fix lock assert after fragmentation change
2023-08-23 08:47:03 +02:00
Sven Eckelmann
7b3fd6323d batman-adv: Fix lock assert after fragmentation change
The automatic recalculation of the maximum allowed MTU is usually triggered
by code sections which are already rtnl lock protected by callers outside
of batman-adv. But when the fragmentation setting is changed via
batman-adv's own batadv genl family, then the rtnl lock is not yet taken.

But dev_set_mtu requires that the caller holds the rtnl lock because it
uses netdevice notifiers. And this code will then fail the check for this
lock:

  RTNL: assertion failed at net/core/dev.c (1953)

Fixes: 12577be7ed ("batman-adv: Merge bugfixes from 2023.2")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2023-08-22 18:54:12 +02:00
Simon Wunderlich
05b717a999
Merge pull request #1014 from ecsv/batadv-for-22.03
openwrt-22.03: batman-adv: Merge bugfixes from 2023.2
2023-08-18 17:40:12 +02:00
Sven Eckelmann
12577be7ed batman-adv: Merge bugfixes from 2023.2
* Broken sync while rescheduling delayed work
* compat: Use native kstrtox.h for 5.10.185
* Do not get eth header before batadv_check_management_packet
* Trigger events for auto adjusted MTU
* Don't increase MTU when set by user
* Fix TT global entry leak when client roamed back
* Fix batadv_v_ogm_aggr_send memory leak

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2023-08-18 15:52:18 +02:00
Rob White
3e10d0728b mesh11sd: update to version 2.0.0
Maintainer: Rob White rob@blue-wave.net
Compile tested: All
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64, on 21.02, 22.03 and snapshot.

Description:
mesh11sd (2.0.0)

This release contains new functionality.

Autonomous portal mode is introduced. This simplifies the rollout of meshnodes allowing a common configuration to be used on all nodes.
Remote administration is introduced, allowing files to be copied and terminal sessions to be opened on established meshnodes, identifying remote nodes by mac address.

 * Add - Update config file [bluewavenet]
 * Add - implementation of remote copy [bluewavenet]
 * Add - implementation of remote connect [bluewavenet]
 * Add - Autonomous portal mode [bluewavenet]

-- Rob White dot@blue-wave.net Mon, 31 Jul 2023 16:59:52 +0000

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 5beb3be9b8)
2023-08-09 12:48:49 +02:00
Moritz Warning
78ca8d3a75 nodogsplash: remove opennds from conflicts
OpenNDS lists nodogsplash a conflict as well.
This causes a circular reference that is not allowed.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
(cherry picked from commit 967dde509b)
2023-08-05 22:29:45 +02:00
Moritz Warning
1381661da1 nodogsplash: update to 5.0.1
Signed-off-by: Moritz Warning <moritzwarning@web.de>
(cherry picked from commit 91e07907fa)
2023-08-05 22:29:45 +02:00
Rob White
5b34377c66 opennds: Release v10.1.2
Maintainer: Rob White rob@blue-wave.net

Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64

Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64; on snapshot, 23.05, 22.03

Description:
opennds (10.1.2)

Security Advisory. This version contains fixes for multiple potential security vulnerabilities
Credit - Stanislav Dashevskyi - standash.github.io [standash]
It also contains some minor bug fixes
  * Fix - Generate unique sha256 faskey if not set in config - CVE-2023-38324 [bluewavenet]
  * Fix - NULL pointer dereference if user_agent is NULL - CVE-2023-38320, CVE-2023-38322 [bluewavenet]
  * Fix - NULL pointer dereference if authdir is called with an incomplete or missing query string - CVE-2023-38313, CVE-2023-38314, CVE-2023-38315 [bluewavenet]
  * Fix - remove deprecated and non-functioning unescape callback - CVE-2023-38316 [bluewavenet]
  * Fix - prevent potential recursive dependency and detect if conflicting package is installed [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 3eb9aa3056)
2023-08-04 18:41:18 +02:00
Rob White
6fbf3b0cae opennds: Release v10.1.1
Maintainer: Rob White rob@blue-wave.net

Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64

Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64; on snapshot, 23.05, 22.03

opennds (10.1.1)
  * This version contains some minor bug fixes and documentation updates
  * Fix - send only contents of buffer, not entire buffer when serving page511 [bluewavenet]
  * Fix - Set fas_remotefqdn to gw_fqdn when overriding FAS settings [bluewavenet]
  * Fix - use absolute path for css and images in ThemeSpec [bluewavenet]
  * Fix - revert to old option names without underscores [bluewavenet]
  * Fix - FAS URL when fas_remotefqdn is not set [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 26f5f0f812)
2023-08-04 18:41:18 +02:00
Rob White
1a40d7c7f3 opennds: Release v10.1.0
Maintainer: Rob White rob@blue-wave.net

Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64

Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64; on snapshot, 23.05, 22.03

opennds (10.1.0)

  This version is a major upgrade including full migration to nftables
  and native uci configuration support even for generic Linux distributions.
  It also includes a significant refactoring of inbuilt memory management,
  improving long term reliability, fixing several memory leaks, buffer overflows and several edge case crashes.

  * Add - support for included custom binauth script [bluewavenet]
  * Add - emit a useful stderr message if auth_restore fails [bluewavenet]
  * Add - procd respawn threshold, respawn timeout and respawn retry parameters [bluewavenet]
  * Add - user friendly commandline message if already running [bluewavenet]
  * Fix - Enabling of Data volume quotas [bluewavenet]
  * Fix - use get_list_from_config instead of get_option_from_config [bluewavenet]
  * Fix - compiler warning - unused variable [bluewavenet]
  * Fix - remove redundant function call ipsetconf [bluewavenet]
  * Fix - walledgarden for both nftset and ipset on OpenWrt [bluewavenet]
  * Add - more meaningful output if attempt is made to restart when already running [bluewavenet]
  * Fix - resolve gatewayfqdn after startup [bluewavenet]
  * Fix - Choose forground or background running according to commandline arguments [bluewavenet]
  * Fix - remove superfluous debug message [bluewavenet]
  * Fix - replace sleep with procd_set_param term_timeout [bluewavenet]
  * Fix - make option enabled default to enabled [bluewavenet]
  * Fix - report authmon pid instead of opennds pid from authmon [bluewavenet]
  * Fix - ensure correct pid obtained for opennds [bluewavenet]
  * Add - StartLimitIntervalSec and StartLimitBurst to systemd service script [bluewavenet]
  * Fix - refactor remote downloads [bluewavenet]
  * Fix - suppress error message on ipset test failure [bluewavenet]
  * Fix - send non-syslog debug information to stdout by default [bluewavenet]
  * Add - C function to check heartbeat watchdog [bluewavenet]
  * Fix - Update generic Linux makefile [bluewavenet]
  * Fix - remove redundant ruleset struct definition [bluewavenet]
  * Fix - potential buffer overflow issue during config stage [bluewavenet]
  * Fix - remove unnecessary calls to free() in page 404 processing [bluewavenet]
  * Fix - remove redundant code from fw_iptables [bluewavenet]
  * Add - updates to binauth_log script [bluewavenet]
  * Add - updates for service startup, systemd and procd [bluewavenet]
  * Add - refactoring of commandline processing [bluewavenet]
  * Fix - remove debugging message [bluewavenet]
  * Fix - typo in client ruleset [bluewavenet]
  * Add - Refactor to use uci config directly even for Generic Linux [bluewavenet]
  * Add - Parsing for multi item lists with spaces in items [bluewavenet]
  * Add - use common library call get_option_fom_config [bluewavenet]
  * Add - support for direct use of uci format config file - string and integer parameters [bluewavenet]
  * Fix - Remove deprecated syslog_facility config setting [bluewavenet]
  * Add - thread busy message to ndsctl [bluewavenet]
  * Add - refactor configure_log_location [bluewavenet]
  * Fix - suppress LOG_NOTICE message when getting mac of interface [bluewavenet]
  * Fix - ndsctl error message [bluewavenet]
  * Fix - get_client_interface for levels 2 and 3 [bluewavenet]
  * Add - use common library write_log function [bluewavenet]
  * Add - Refactor memory management [bluewavenet]
  * Fix - fix and refactor upload rate limiting rules [bluewavenet]
  * Fix - Change a debug message from err to info [bluewavenet]
  * Add - refine common buffer sizes [bluewavenet]
  * Add - use initialised heap memory for redirect_to_splashpage [bluewavenet]
  * Add - user message to themespec [bluewavenet]
  * Add - auth_restore support ie reauth clients after a restart by default. [bluewavenet]
  * Add - Library call to preemptively re-auth clients after a restart or crash [bluewavenet]
  * Add - BinAuth, write an authenticated clients list [bluewavenet]
  * Add - library call "check_heartbeat" [bluewavenet]
  * Fix - Tidy up redundant code [bluewavenet]
  * Fix - change warning message to debug message when iw not installed [bluewavenet]
  * Add - library call to log to syslog [bluewavenet]
  * Fix - use initialised heap memory for client list entries [bluewavenet]
  * Fix - ignore legacy ipset firewall rule [bluewavenet]
  * Fix - refactor memory management for MHD calls - use heap memory for buffers etc [bluewavenet]
  * Fix - missing free causing memory leak [bluewavenet]
  * Fix  - predefine and initialise buffer for send_redirect_temp [bluewavenet]
  * Add - support protocol "all" in firewall ruleset [bluewavenet]
  * Add - pre-allocation of initialised buffers [bluewavenet]
  * Fix  - prevent buffer overrun on removing client [bluewavenet]
  * Add - update MHD connection timeout and connection limit [bluewavenet]
  * Add - chain ndsDLR for dynamic client download rate limiting rules [bluewavenet]
  * Add - Use Internal Polling Thread / Thread Per Connection in MHD [bluewavenet]
  * Add - some new default values [bluewavenet]
  * Fix - remove some redundant code and fix some compiler warnings [bluewavenet]
  * Fix - remove redundant library command string [bluewavenet]
  * Fix - Tidy up redundant iptables code [bluewavenet]
  * Add - convert trusted client support to nftables [bluewavenet]
  * Add - refer to nftables [bluewavenet]
  * Add - move code for generating authentication mark string to initial setup [bluewavenet]
  * Add - full nftset support with ipset import where required [bluewavenet]
  * Add - nftset support library calls [bluewavenet]
  * Add - ipset_to_nftset library call [bluewavenet]
  * Add - support for nftables version of append_ruleset and nftables_compile [bluewavenet]
  * Fix - buffer overflow in page_511 generation [bluewavenet]
  * Add - more nftables migration including rate quotas [bluewavenet]
  * Fix - change GatewayInterface to lower case [bluewavenet]
  * Add - upload and download limiting client flags for future use [bluewavenet]
  * add - lib calls "pad_string" and "replace_client_rule" [bluewavenet]
  * Add - further nftables migration [bluewavenet]
  * Fix - correctly parse options from legacy conf file [bluewavenet]
  * Fix - some compiler warnings and set min iptables version [bluewavenet]
  * Add - Generic Linux configure walledgarden [bluewavenet]
  * Add - Implementation of nftsets for walledgarden [bluewavenet]
  * Add - migration to nftables, next phase. [bluewavenet]
  * Add - library function delete_client_rule [bluewavenet]
  * Fix - remove duplicate definition [bluewavenet]
  * Add - First stage migration to nftables [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 7b1911020b)
2023-06-30 23:38:04 +02:00
Bradford Zhang
faf2c321ef bird2: bump to version 2.13.1
Signed-off-by: Bradford Zhang <zyc@zyc.name>
(cherry picked from commit d98b9b5052)
2023-06-30 01:17:39 +02:00
Bradford Zhang
f2b9e35365 bird2: bump to version 2.13
Signed-off-by: Bradford Zhang <zyc@zyc.name>
(cherry picked from commit 6410411b12)
2023-05-20 00:10:07 +02:00
Josef Schlehofer
1cc7676b9f
Merge pull request #957 from rogerpueyo/openwrt-22.03-backport-bird1-fixes
Backport bird1-openwrt fixes to 22.03
2023-03-09 09:20:19 +01:00
Roger Pueyo Centelles
b8e0831736 bird1: fix "Form token mismatch" errors in luci-app-bird1-ipv{4,6}
The "Filters", "Functions" and "Status" sections of the web interfaces
for both Bird4 and Bird6 threw the following error upon performing any
action:

   Form token mismatch
   The submitted security token is invalid or already expired!

Changing their entry types from "cbi" to "form" fixes them.

Fixes #922.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit c37fbab8f5)
2023-03-08 15:08:20 +01:00
Roger Pueyo Centelles
3d7df59413 bird1: rename get_bool() to get_a_bool() in bird{4,6}-lib.sh
This patch renames the get_bool() function, implemented in the
bird4-lib.sh and bird6-lib.sh files (respectively, for the IPv4 and
the IPv6 versions of the package), as well as all the calls to it.
This way, we avoid a function name collision with the one provided by
file /lib/functions.sh, which is slightly different and caused an
out-of-memory error when parsing the bird4/bird6 UCI config files.

Fixes #920.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit d32f93e049)
2023-03-08 15:08:20 +01:00
Roger Pueyo Centelles
4e0e702747 bird1-openwrt: fix Makefile issues
This commit replaces the deprecated licensing text with an SPDX license
identifier, and removes tab indentations in the conffiles sections.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit 6697ca291f)
2023-03-08 15:08:19 +01:00
Roger Pueyo Centelles
58a4a00043 bird1-openwrt: use a single Makefile for IPv4 and IPv6 packages
Having two Makefile files, respectively in the bird1-openwrt-ipv4 and
bird1-ipv6-openwrt folders, made the CI tests fail at the time of
building the packages, due to a compilation error. This patch merges
both Makefile files into a single one. As a result, package compilation
succeeds during the CI tests.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit 914c27aeb6)
2023-03-08 15:08:09 +01:00
Bradford Zhang
cc1dd763e0 bird2: bump to version 2.0.12
Signed-off-by: Bradford Zhang <zyc@zyc.name>
(cherry picked from commit 7d6f3c0492)
2023-02-22 11:55:53 +01:00
Nick Hainke
83bc4fc999 babeld: remove AUTORELEASE
AUTOREMOVE is now deprecated.

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 20e1b16a97)
2023-02-13 09:52:07 +01:00
Nick Hainke
59bc28b83e babeld: update to 1.12.2
Release announcement:
https://alioth-lists.debian.net/pipermail/babel-users/2023-February/004038.html

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit bb65c3a18d)
2023-02-13 09:52:07 +01:00
Rob White
74948d5cea opennds: Release v9.10.0
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64; on snapshot, 22.03

opennds (9.10.0)

  * This version adds new functionality, and fixes some issues
  * Fix - unable to read client upload traffic volume on some versions of iptables-nft (generic Linux) [bluewavenet]
  * Fix - compatibility with bash shell on generic Linux [bluewavenet]
  * Fix - compiler warning, unused variable [bluewavenet]
  * Fix - silently continue if fw4 table is not found [bluewavenet]
  * Add - Start daemon earlier on boot [bluewavenet]
  * Fix - compatibility with legacy iptables packages [bluewavenet]
  * Add - call to delete nft chains [bluewavenet]
  * Fix - stop using legacy INPUT and FORWARD chains [bluewavenet]
  * Add - watchdog restart if openNDS nftables ruleset is missing [bluewavenet]
  * Add - automated rule setting/deleting for users_to_router [bluewavenet]
  * Add - Change fwhook to add users to router rule to fw4 on OpenWrt [bluewavenet]
  * Add - Set allow or passthrough mode for users_to_router rules [bluewavenet]
  * Fix - set fwhook default to disabled to prevent restart on hotplug event [bluewavenet]
  * Fix - fas-aes-https description comments [bluewavenet]
  * Fix - icon overspill on splash pages [bluewavenet]
  * Fix - missing config option in community script [bluewavenet]
  * Fix - urlencode handling of "$" character and add htmlentity encode/decode library call [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 18168b3468)
2023-01-24 23:53:38 +01:00
Bradford Zhang
1a87333f26 bird2: bump to version 2.0.11
Signed-off-by: Bradford Zhang <zyc@zyc.name>
2022-12-21 10:22:48 +01:00
Rob White
0fb5e3c1a3 opennds: Release v9.9.1
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64; on snapshot, 22.03

opennds (9.9.1)

  * This version fixes some issues
  * Fix - minimalise deprecated legacy .conf file
  * Fix - Prevent rate limit refresh if rate limit is set to 0 [bluewavenet]
  * Fix - Mute some unneccessary debug messages [bluewavenet]
  * Fix - do not write unconfigured (null) parameters to client id file (cidfile) [bluewavenet]
  * Fix - Prevent error "Command process exited due to signal 13" when executing an external script [bluewavenet]
  * Fix - use WTERMSIG() return code for _execute_ret when execute fails [bluewavenet]
  * Fix - use correct response type for error 503 [bluewavenet]
  * Update Makefile description [bluewavenet]
  * Add - Community Local FAS install script [bluewavenet]
  * Update - Mention TCP port 80 requires AutonomousWG [afriza]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 6c31b5bd1c)
2022-11-22 19:21:41 +01:00
Simon Wunderlich
9388f0e4a2
Merge pull request #918 from ecsv/batadv-for-22.03
openwrt-22.03: batman-adv: Merge bugfixes from 2022.3
2022-11-11 16:48:38 +01:00
Sven Eckelmann
d9cd6ef94f batman-adv: Merge bugfixes from 2022.3
* Fix hang up with small MTU hard-interface

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2022-11-10 21:31:49 +01:00
Simon Wunderlich
4903e1868e
Merge pull request #913 from ecsv/batadv-for-22.03
openwrt-22.03: alfred/batman-adv: Rebuild on CONFIG*_ALFRED_*/CONFIG_BATMAN_ADV_ changes
2022-10-24 10:44:32 +02:00
Sven Eckelmann
6b612cd371 alfred: Rebuild on CONFIG*_ALFRED_* changes
The buildsystem doesn't know that the Package/*/config kconfig symbols are
related to the alfred package build. It is necessary to explicitly define it
via PKG_CONFIG_DEPENDS.

Fixes: f76074d424 ("alfred: add alfred 2013.3.0 to feed")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2022-10-23 10:20:57 +02:00
Sven Eckelmann
2e28186d64 batman-adv: Rebuild on CONFIG_BATMAN_ADV_* changes
The buildsystem doesn't know that the KernelPackage/*/config kconfig
symbols are related to the batman-adv package build. It is necessary to
explicitly define it via PKG_CONFIG_DEPENDS.

Fixes: 522ce8dfdb ("batman-adv: rename folder name to match project & package name")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2022-10-23 10:04:54 +02:00
Rob White
85028704f6 opennds: Release v9.9.0
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64; on snapshot, 22.03

opennds (9.9.0)

  * This version adds new functionality, and fixes some issues
  * Add - Community ThemeSpec to support legacy splash.html [bluewavenet]
  * Fix - ensure nat_traversal_poll_interval defaults to 10 seconds [bluewavenet]
  * Add - process send_to_fas_deauthed and send_to_fas_custom in fas-aes-https [bluewavenet]
  * Add - support for send_to_fas_deauthed library call in binauth_log.sh [bluewavenet]
  * Add - heartbeat file containing timestamp [bluewavenet]
  * Add - send_to_fas_deauthed and send_to_fas_custom library calls [bluewavenet]
  * Add - Save authmon daemon startup arguments for libopennds [bluewavenet]
  * Fix - potential divide by zero errors [bluewavenet]
  * Add - option nat_traversal_poll_interval [bluewavenet]
  * Add - Library calls for urlencode and urldecode[bluewavenet]
  * Fix - Don't download remotes if ThemeSpec not configured [bluewavenet]
  * Add - Error report in syslog if dhcp database is not found [bluewavenet]
  * Add - library calls, deauth and daemon_deauth [bluewavenet]
  * Fix - change WTERMSIG log from WARNING to NOTICE [bluewavenet]
  * Add - Set minimum bucket size to 5 regardless of configured bucket ratio [bluewavenet]
  * Fix - safe_vasprint return value [bluewavenet]
  * Add - test if safe_calloc failed and serve error 503 [bluewavenet]
  * Add - use calloc instead of malloc[bluewavenet]
  * fix - safe functions to return error rather than exit [bluewavenet]
  * Add - b64decode custom string received by binauth script [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 6cccf1fd65)
2022-10-09 16:54:50 +02:00
Rob White
8872359011 mesh11sd: Release v1.2.0
Maintainer: Rob White rob@blue-wave.net
Compile tested: All
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64, on 21.02, 22.03 and snapshot.

Description:
  * This version adds new functionality.
  * Update README.md
  * Add - Traffic volume, Peers and stations to status output [bluewavenet]
  * Add - limit up-checks to mesh interfaces only [bluewavenet]

 -- Rob White <dot@blue-wave.net>  Mon, 08 Aug 2022 13:40:31 +0000

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 290ed82bd8)
2022-08-12 20:43:42 +02:00
Rob White
e819edeea1 opennds: Release v9.8.0
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64; on snapshot, 22.03

  * This version adds new functionality, and fixes some issues
  * Fix - suppress stderr in client_params in generic linux [bluewavenet]
  * Fix - client_params on generic linux, remote logo not supported yet [bluewavenet]
  * Fix - compiler warning [bluewavenet]
  * Fix - set voucher script as executable [bluewavenet]
  * Update OpenWrt Makefile [bluewavenet]
  * Add - format footer in Themespec scripts [bluewavenet]
  * Update footer on all scripts [bluewavenet]
  * Update - Community Voucher Themespec [bluewavenet]
  * Add - Check on startup for Y2.038K bug (32 bit time) [bluewavenet]
  * Fix - Remove deprecated Debian specific files [bluewavenet]
  * Add - More css updates [bluewavenet]
  * Add - user friendly RFC8910 page511 text and remove refresh button [bluewavenet]
  * Fix - MHD becomes unresponsive serving page 511 for rfc8910 clients [bluewavenet]
  * Add - extra startup settings - ignore_sigpipe and write nds info [bluewavenet]
  * Add - set MHD connection limit to 100, set MHD listen backlog size to 128, set MHD_HTTP_HEADER_CONNECTION "close" [bluewavenet]
  * Fix - Add missing LOG_CRIT in debug [bluewavenet]
  * Add - some useful diagnostic output in authmon [bluewavenet]
  * Fix - Move testing to community [bluewavenet]
  * Fix - Community - Use tmpfs by default for vouchers.txt file [bluewavenet]
  * Add - README with use instructions and notice about flash wearout [fservida]
  * Fix - Refactor folder structure for community themespec [fservida]
  * Add - Create vouchers.txt [fservida]
  * Add - Create theme_voucher.sh [fservida]
  * Update - README.md [bluewavenet]
  * Add - image download info message [bluewavenet]
  * Add - css updates [dianariyanto]
  * Add - allow downloaded remotes refresh for all modes [bluewavenet]
  * Add - download_resources.sh to installed files [bluewavenet]
  * Add - support for download of custom images and files in the status.client page [bluewavenet]
  * Remove - Debian man page support [bluewavenet]
  * Fix - Add missing mkdir command in Makefile [dzatoah]
  * Fix - typos in src/{conf, main}.c [dzatoah]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit b6f063dcca)
2022-08-10 08:00:06 +02:00
Toke Høiland-Jørgensen
1ccc4e4351
Merge pull request #896 from mbargo23/bird22.03
bird2: bump to version 2.0.10
2022-06-29 15:11:08 +02:00
Jan Betik
69afa346df
bird2: bump to version 2.0.10
Signed-off-by: Jan Betik <jan.betik@nic.cz>
(cherry picked from commit 1fa9fa339c)
2022-06-29 14:34:22 +02:00
Nick Hainke
173576829b olsrd: replace patch for storms with real patch
Fixes: bb5bbc6afd ("olsrd: import patch to prevent olsr storms")

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit cfd82729a9)
2022-06-23 14:04:56 +02:00
William Fleurant
1e1d00448e cjdns: support the supernodes feature (#884)
Signed-off-by: William Fleurant <meshnet@protonmail.com>
(cherry picked from commit d705f79890)
Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-06-21 00:00:28 +02:00
William Fleurant
2c3cf7fbe0 cjdns: bump v21.1 and patch find-python (#883)
* cjdns: bump source from v21 to v21.1
* cjdns: bump release with patch to prefer python2
* cjdns: refresh patches and remove patch musl

Signed-off-by: William Fleurant <meshnet@protonmail.com>
(cherry picked from commit 217330bb5e)
Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-06-20 23:31:17 +02:00
Nick Hainke
4b2b6b3d2b naywatch: add log when naywatch activates
Naywatch now prints
  naywatch: Naywatch Activated!
when becoming active.

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 09d5ceb923)
2022-06-10 10:34:18 +02:00
Rob White
b7a8391b77 mesh11sd: Release v1.1.1
Maintainer: Rob White rob@blue-wave.net
Compile tested: All
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64, on 21.02.2 and snapshot.

Description:
  * This version adds new functionality, and fixed some issues
  * Fix - repeated syslog messages - output only on mode change [bluewavenet]
  * Add - service status to json output [bluewavenet]
  * Add - support for multiple mesh interfaces [bluewavenet]
  * Fix - duplicate ifname if more than one mesh interface [bluewavenet]
  * Add - compatibility with iw < v5.16-1 [bluewavenet]
  * Add - search and delete phantom meshnodes [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 1cd90655da)
2022-05-22 10:57:46 +02:00