packages/net/banip/files

banIP - ban incoming and outgoing IP addresses/subnets via sets in nftables

Description

IP address blocking is commonly used to protect against brute force attacks, prevent disruptive or unauthorized address(es) from access or it can be used to restrict access to or from a particular geographic area — for example. Further more banIP scans the log file via logread and bans IP addresses that make too many password failures, e.g. via ssh.

Main Features

• banIP supports the following fully pre-configured domain blocklist feeds (free for private usage, for commercial use please check their individual licenses).
  Please note: the columns "INP" and "FWD" show for which chains the feeds are suitable in common scenarios, e.g. the first entry should be limited to forward chain - see the config options 'ban_blockforward' and 'ban_blockinput' below.

Feed	Focus	INP	FWD	Information
adaway	adaway IPs		x	Link
adguard	adguard IPs		x	Link
adguardtrackers	adguardtracker IPs		x	Link
antipopads	antipopads IPs		x	Link
asn	ASN IPs		x	Link
backscatterer	backscatterer IPs	x	x	Link
bogon	bogon prefixes	x	x	Link
country	country blocks	x		Link
cinsscore	suspicious attacker IPs	x	x	Link
darklist	blocks suspicious attacker IPs	x	x	Link
debl	fail2ban IP blacklist	x	x	Link
doh	public DoH-Provider		x	Link
drop	spamhaus drop compilation	x	x	Link
dshield	dshield IP blocklist	x	x	Link
edrop	spamhaus edrop compilation	x	x	Link
feodo	feodo tracker	x	x	Link
firehol1	firehol level 1 compilation	x	x	Link
firehol2	firehol level 2 compilation	x	x	Link
firehol3	firehol level 3 compilation	x	x	Link
firehol4	firehol level 4 compilation	x	x	Link
greensnow	suspicious server IPs	x	x	Link
iblockads	Advertising IPs		x	Link
iblockspy	Malicious spyware IPs	x	x	Link
myip	real-time IP blocklist	x	x	Link
nixspam	iX spam protection	x	x	Link
oisdnsfw	OISD-nsfw IPs		x	Link
oisdsmall	OISD-small IPs		x	Link
proxy	open proxies	x		Link
ssbl	SSL botnet IPs	x	x	Link
stevenblack	stevenblack IPs		x	Link
talos	talos IPs	x	x	Link
threat	emerging threats	x	x	Link
threatview	malicious IPs	x	x	Link
tor	tor exit nodes	x		Link
uceprotect1	spam protection level 1	x	x	Link
uceprotect2	spam protection level 2	x	x	Link
uceprotect3	spam protection level 3	x	x	Link
urlhaus	urlhaus IDS IPs	x	x	Link
urlvir	malware related IPs	x	x	Link
webclient	malware related IPs	x	x	Link
voip	VoIP fraud blocklist	x	x	Link
yoyo	yoyo IPs		x	Link

• zero-conf like automatic installation & setup, usually no manual changes needed
• all sets are handled in a separate nft table/namespace 'banIP'
• full IPv4 and IPv6 support
• supports nft atomic set loading
• supports blocking by ASN numbers and by iso country codes
• supports local allow- and blocklist (IPv4, IPv6, CIDR notation or domain names)
• auto-add the uplink subnet to the local allowlist
• provides a small background log monitor to ban unsuccessful login attempts in real-time
• auto-add unsuccessful LuCI, nginx, Asterisk or ssh login attempts to the local blocklist
• fast feed processing as they are handled in parallel as background jobs
• per feed it can be defined whether the input chain or the forward chain should be blocked (default: both chains)
• automatic blocklist backup & restore, the backups will be used in case of download errors or during startup
• automatically selects one of the following download utilities with ssl support: aria2c, curl, uclient-fetch or wget
• supports a 'allowlist only' mode, this option restricts internet access from/to a small number of secure websites/IPs
• provides comprehensive runtime information
• provides a detailed set report
• provides a set search engine for certain IPs
• feed parsing by fast & flexible regex rulesets
• minimal status & error logging to syslog, enable debug logging to receive more output
• procd based init system support (start/stop/restart/reload/status/report/search)
• procd network interface trigger support
• ability to add new banIP feeds on your own

Prerequisites

• OpenWrt, latest stable release or a snapshot with nft/firewall 4 support
• a download utility with SSL support: 'wget', 'uclient-fetch' with one of the 'libustream-*' SSL libraries, 'aria2c' or 'curl' is required
• a certificate store like 'ca-bundle', as banIP checks the validity of the SSL certificates of all download sites by default
• for E-Mail notifications you need to install and setup the additional 'msmtp' package

Please note the following:

• Devices with less than 256Mb of RAM are not supported
• Any previous installation of banIP must be uninstalled, and the /etc/banip folder and the /etc/config/banip configuration file must be deleted (they are recreated when this version is installed)
• There is no LuCI frontend at this time

Installation & Usage

• update your local opkg repository (opkg update)
• install banIP (opkg install banip) - the banIP service is disabled by default
• edit the config file '/etc/config/banip' and enable the service (set ban_enabled to '1'), then add pre-configured feeds via 'ban_feed' (see the config options below)
• start the service with '/etc/init.d/banip start' and check check everything is working by running '/etc/init.d/banip status'

banIP CLI interface

• All important banIP functions are accessible via CLI. A LuCI frontend will be available in due course.

~# /etc/init.d/banip
Syntax: /etc/init.d/banip [command]

Available commands:
	start           Start the service
	stop            Stop the service
	restart         Restart the service
	reload          Reload configuration files (or restart if service does not implement reload)
	enable          Enable service autostart
	disable         Disable service autostart
	enabled         Check if service is started on boot
	report          [text|json|mail] Print banIP related set statistics
	search          [<IPv4 address>|<IPv6 address>] Check if an element exists in the banIP sets
	running         Check if service is running
	status          Service status
	trace           Start with syscall trace
	info            Dump procd service info

banIP config options

Option	Type	Default	Description
ban_enabled	option	0	enable the banIP service
ban_nicelimit	option	0	ulimit nice level of the banIP service (range 0-19)
ban_filelimit	option	1024	ulimit max open/number of files (range 1024-4096)
ban_loglimit	option	100	the logread monitor scans only the last n lines of the logfile
ban_logcount	option	1	how many times the IP must appear in the log to be considered as suspicious
ban_logterm	list	regex	various regex for logfile parsing (default: dropbear, sshd, luci, nginx, asterisk)
ban_autodetect	option	1	auto-detect wan interfaces, devices and subnets
ban_debug	option	0	enable banIP related debug logging
ban_loginput	option	1	log drops in the input chain
ban_logforward	option	0	log rejects in the forward chain
ban_autoallowlist	option	1	add wan IPs/subnets automatically to the local allowlist
ban_autoblocklist	option	1	add suspicious attacker IPs automatically to the local blocklist
ban_allowlistonly	option	0	restrict the internet access from/to a small number of secure websites/IPs
ban_reportdir	option	/tmp/banIP-report	directory where banIP stores the report files
ban_backupdir	option	/tmp/banIP-backup	directory where banIP stores the compressed backup files
ban_protov4	option	- / autodetect	enable IPv4 support
ban_protov6	option	- / autodetect	enable IPv4 support
ban_ifv4	list	- / autodetect	logical wan IPv4 interfaces, e.g. 'wan'
ban_ifv6	list	- / autodetect	logical wan IPv6 interfaces, e.g. 'wan6'
ban_dev	list	- / autodetect	wan device(s), e.g. 'eth2'
ban_trigger	list	-	logical startup trigger interface(s), e.g. 'wan'
ban_triggerdelay	option	10	trigger timeout before banIP processing begins
ban_deduplicate	option	1	deduplicate IP addresses across all active sets
ban_splitsize	option	0	split ext. sets after every n lines/members (saves RAM)
ban_cores	option	- / autodetect	limit the cpu cores used by banIP (saves RAM)
ban_nftexpiry	option	-	expiry time for auto added blocklist members, e.g. '5m', '2h' or '1d'
ban_nftpriority	option	-200	nft banIP table priority (default is the prerouting table priority)
ban_feed	list	-	external download feeds, e.g. 'yoyo', 'doh', 'country' or 'talos' (see feed table)
ban_asn	list	-	ASNs for the 'asn' feed, e.g.'32934'
ban_country	list	-	country iso codes for the 'country' feed, e.g. 'ru'
ban_blockinput	list	-	limit a feed to the input chain, e.g. 'country'
ban_blockforward	list	-	limit a feed to the forward chain, e.g. 'doh'
ban_fetchcmd	option	- / autodetect	'uclient-fetch', 'wget', 'curl' or 'aria2c'
ban_fetchparm	option	- / autodetect	set the config options for the selected download utility
ban_fetchinsecure	option	0	don't check SSL server certificates during download
ban_mailreceiver	option	-	receiver address for banIP related notification E-Mails
ban_mailsender	option	no-reply@banIP	sender address for banIP related notification E-Mails
ban_mailtopic	option	banIP notification	topic for banIP related notification E-Mails
ban_mailprofile	option	ban_notify	mail profile used in 'msmtp' for banIP related notification E-Mails
ban_resolver	option	-	external resolver used for DNS lookups
ban_feedarchive	option	/etc/banip/banip.feeds.gz	full path to the compressed feed archive file used by banIP

Examples

banIP report information

~# /etc/init.d/banip report
:::
::: banIP Set Statistics
:::
    Timestamp: 2023-02-08 22:12:40
    ------------------------------
    auto-added to allowlist: 1
    auto-added to blocklist: 0

    Set                  | Set Elements  | Chain Input   | Chain Forward | Input Packets | Forward Packets
    ---------------------+---------------+---------------+---------------+---------------+----------------
    allowlistvMAC        | 0             | n/a           | OK            | n/a           | 0             
    allowlistv4          | 1             | OK            | OK            | 0             | 0             
    allowlistv6          | 0             | OK            | OK            | 0             | 0             
    blocklistvMAC        | 0             | n/a           | OK            | n/a           | 0             
    blocklistv4          | 0             | OK            | OK            | 0             | 0             
    blocklistv6          | 0             | OK            | OK            | 0             | 0             
    dohv4                | 542           | n/a           | OK            | n/a           | 22            
    adguardv4            | 23007         | n/a           | OK            | n/a           | 18            
    yoyov4               | 1936          | n/a           | OK            | n/a           | 1             
    oisdbasicv4          | 26000         | n/a           | OK            | n/a           | 325           
    ---------------------+---------------+---------------+---------------+---------------+----------------
    10                   | 51486         | 4             | 10            | 0             | 366

banIP runtime information

~# etc/init.d/banip status
::: banIP runtime information
  + status            : active
  + version           : 0.8.0
  + element_count     : 51486
  + active_feeds      : allowlistvMAC, allowlistv4, allowlistv6, blocklistvMAC, blocklistv4, blocklistv6, dohv4, adguardv4
                        , yoyov4, oisdbasicv4
  + active_devices    : eth2
  + active_interfaces : wan
  + active_subnets    : 192.168.98.107/24
  + run_info          : base_dir: /tmp, backup_dir: /tmp/banIP-backup, report_dir: /tmp/banIP-report, feed_archive: /etc/b
                        anip/banip.feeds.gz
  + run_flags         : protocol (4/6): ✔/✘, log (inp/fwd): ✔/✘, deduplicate: ✔, split: ✘, allowed only: ✘
  + last_run          : action: start, duration: 0m 15s, date: 2023-02-08 22:12:46
  + system_info       : cores: 2, memory: 3614, device: PC Engines apu1, OpenWrt SNAPSHOT r21997-b5193291bd

banIP search information

~# /etc/init.d/banip search 221.228.105.173
:::
::: banIP Search
:::
    Looking for IP 221.228.105.173 on 2023-02-08 22:12:48
    ---
    IP found in set oisdbasicv4

allow-/blocklist handling
banIP supports local allow and block lists (IPv4, IPv6, CIDR notation or domain names), located in /etc/banip/banip.allowlist and /etc/banip/banip.blocklist.
Unsuccessful login attempts or suspicious requests will be tracked and added to the local blocklist (see the 'ban_autoblocklist' option). The blocklist behaviour can be further tweaked with the 'ban_nftexpiry' option.
Furthermore the uplink subnet will be added to local allowlist (see 'ban_autowallowlist' option).
Both lists also accept domain names as input to allow IP filtering based on these names. The corresponding IPs (IPv4 & IPv6) will be extracted in a detached background process and added to the sets.

allowlist-only mode
banIP supports an "allowlist only" mode. This option restricts the internet access from/to a small number of secure websites/IPs, and block access from/to the rest of the internet. All IPs and Domains which are not listed in the allowlist are blocked.

redirect Asterisk security logs to lodg/logread
banIP only supports logfile scanning via logread, so to monitor attacks on Asterisk, its security log must be available via logread. To do this, edit '/etc/asterisk/logger.conf' and add the line 'syslog.local0 = security', then run 'asterisk -rx reload logger' to update the running Asterisk configuration.

tweaks for low memory systems
nftables supports the atomic loading of rules/sets/members, which is cool but unfortunately is also very memory intensive. To reduce the memory pressure on low memory systems (i.e. those with 256-512Mb RAM), you should optimize your configuration with the following options:

* point 'ban_reportdir' and 'ban_backupdir' to an external usb drive
* set 'ban_cores' to '1' (only useful on a multicore system) to force sequential feed processing
* set 'ban_splitsize' e.g. to '1000' to split the load of an external set after every 1000 lines/members

tweak the download options
By default banIP uses the following pre-configured download options:

    * aria2c: --timeout=20 --allow-overwrite=true --auto-file-renaming=false --log-level=warn --dir=/ -o
    * curl: --connect-timeout 20 --silent --show-error --location -o
    * uclient-fetch: --timeout=20 -O
    * wget: --no-cache --no-cookies --max-redirect=0 --timeout=20 -O

To override the default set 'ban_fetchparm' manually to your needs.

send E-Mail notifications via 'msmtp'
To use the email notification you must install & configure the package 'msmtp'.
Modify the file '/etc/msmtprc', e.g.:

[...]
defaults
auth            on
tls             on
tls_certcheck   off
timeout         5
syslog          LOG_MAIL
[...]
account         ban_notify
host            smtp.gmail.com
port            587
from            <address>@gmail.com
user            <gmail-user>
password        <password>

Finally add a valid E-Mail receiver address.

add new banIP feeds
The banIP blocklist feeds are stored in an external, compressed JSON file '/etc/banip/banip.feeds.gz'.
To add a new or edit an existing feed extract the compressed JSON file gunzip /etc/banip/banip.feeds.gz. A valid JSON source object contains the following required information, e.g.:

	[...]
	"tor": {
		"url_4": "https://raw.githubusercontent.com/SecOps-Institute/Tor-IP-Addresses/master/tor-exit-nodes.lst",
		"url_6": "https://raw.githubusercontent.com/SecOps-Institute/Tor-IP-Addresses/master/tor-exit-nodes.lst",
		"rule_4": "/^(([0-9]{1,3}\\.){3}(1?[0-9][0-9]?|2[0-4][0-9]|25[0-5])(\\/(1?[0-9]|2?[0-9]|3?[0-2]))?)$/{printf \"%s,\\n\",$1}",
		"rule_6": "/^(([0-9A-f]{0,4}:){1,7}[0-9A-f]{0,4}:?(\\/(1?[0-2][0-8]|[0-9][0-9]))?)$/{printf \"%s,\\n\",$1}",
		"focus": "tor exit nodes",
		"descurl": "https://github.com/SecOps-Institute/Tor-IP-Addresses"
	},
	[...]

Add an unique object name, make the required changes and compress the changed JSON file finally with gzip /etc/banip/banip.feeds to use the new feed file in banIP.
Please note: if you're going to add new feeds, always work with a copy of the default file; this file is always overwritten with every banIP update. To reference your own file set the option 'ban_feedarchive' accordingly

Support

Please join the banIP discussion in this forum thread or contact me by mail dev@brenken.org

Removal

• stop all banIP related services with /etc/init.d/banip stop
• optional: remove the banip package (opkg remove banip)

Have fun!
Dirk