Remove the extra include for kernel headers from this user space
application. These extra includes are causing compile errors when
compiling with glibc. User space applications should not need such
headers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
When PAM is available, the build system will detect and use it, but the
package dependency was missing.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
Consider only integer part of free space in megabytes when
deciding the boundaries of the to be created partition.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Update Makefile to use github mirror of new source url since current one is
going to retire. "Notice this site is likely going to be shutdown after over
28 years. I will likely be moving all my code-bases to
https://gitlab.com/OldManProgrammer"[1]
1. http://mama.indstate.edu/users/ice/tree
Signed-off-by: John Audia <therealgraysky@proton.me>
exposes PoE metrics obtained from realtek-poe
# HELP realtek_poe_switch_info information about the poe controller
# TYPE realtek_poe_switch_info gauge
realtek_poe_switch_info{mcu="ST Micro ST32F100 Microcontroller",firmware="v22.4"} 1
# HELP realtek_poe_switch_budget_watts overall power budget
# TYPE realtek_poe_switch_budget_watts gauge
realtek_poe_switch_budget_watts 77
# HELP realtek_poe_switch_consumption_watts overall power consumption
# TYPE realtek_poe_switch_consumption_watts gauge
realtek_poe_switch_consumption_watts 5
# HELP realtek_poe_port_priority poe priority of port
# TYPE realtek_poe_port_priority gauge
realtek_poe_port_priority{device="lan1"} 1
realtek_poe_port_priority{device="lan2"} 1
[...]
# HELP realtek_poe_port_consumption_watts per port power consumption
# TYPE realtek_poe_port_consumption_watts gauge
realtek_poe_port_consumption_watts{device="lan1"} 0
realtek_poe_port_consumption_watts{device="lan2"} 0
[...]
# HELP realtek_poe_port_state per port poe state
# TYPE realtek_poe_port_state gauge
realtek_poe_port_state{device="lan1",state="Disabled"} 0
realtek_poe_port_state{device="lan1",state="Searching"} 1
[...]
(states: Disabled, Searching, Delivering power, Fault, Other fault, Requesting power)
# HELP realtek_poe_port_mode per port poe mode
# TYPE realtek_poe_port_mode gauge
realtek_poe_port_mode{device="lan1",mode="PoE"} 0
realtek_poe_port_mode{device="lan1",mode="PoE+"} 1
[...]
(modes: PoE, Legacy, pre-PoE+, PoE+)
Signed-off-by: Gregor Michels <hirnpfirsich@brainpeach.de>
The realtek-poe package is used to configure the Power-over-Ethernet
controller found on Realtex 838x based switches. On many such
switches, the PoE doesn't work without this package.
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The domoticz init script didn't properly read the "disabled"
configuration parameter and instead the service was always started.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
hfsprogs uses libbsd for strlcpy(), but the strlcpy() calls are inside
`#ifdef` and don't show up on the OpenWRT package.
Signed-off-by: Guilherme Janczak <guilherme.janczak@yandex.com>
Use PKG_FIXUP:=autoreconf when building cryptsetup to prevent
accidental linkage against host libraries.
Fixes: #19011
Reported-by: @dreirund
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
What's Changed:
- Enhancements:
- add support of environment secret during build step by @glours
- Fixes:
- networks: prevent issues due to duplicate names by @milas
- Use appropriate dependency condition for one-shot containers when
running compose up --wait by @laurazard
- Fix environment variable expansion by @ulyssessouza in
compose-spec/compose-go#276
- Validate depended-on services exist in consistency check by
@laurazard in compose-spec/compose-go#281
- Fix hash usage in environment values by @ulyssessouza in
compose-spec/compose-go#283
- build: respect dependency order for classic builder by @milas
- fix: panic caused by empty string argument by @nicksieger
- (re)start should not impact one-off containers by @ndeloof
- Fix issue with close networks name on up and down command by
@glours
- keep the container reference when volumes_from target a container
and not a service by @glours
- build.go: initialize CustomLabels map if nil by @paroque28
Signed-off-by: Javier Marcet <javier@marcet.info>
Fixes compilation when libiconv is missing.
Also remove pthread from glibc. No longer needed.
Cleanup Makefile for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Upstream bump and add a patch to use a blue highlight color for the dark
color scheme (--color dark) as some users find the default bright green is
too intense.
Note that invoking ncdu without the --color switch at use uses the upstream
default bright green, so users will need to call ncdu with --color dark in
order to get the blue color.
Signed-off-by: John Audia <therealgraysky@proton.me>
Enhancements:
- Support for setting secret from env variable by @ndeloof
Fixes:
- Do not start unrelated dependencies on run by @laurazard
- Fix service not found errors when using --no-deps by @nicksieger
- Respect COMPOSE_REMOVE_ORPHANS env var on down by @nicksieger
- Fix project level bind mounts volumes by @ulyssessouza
- Respect deploy.limits.cpus and deploy.limits.pids by @glours
Internal:
- Upgrade: Go v1.18.3 by @thaJeztah
- Upgrade: compose-go v1.2.8 by @milas
- Upgrade: buildx v0.8.2 by @dependabot
- Upgrade: containerd v1.6.6 by @dependabot
Signed-off-by: Javier Marcet <javier@marcet.info>
otherwise, a user would have to either manually run /etc/init.d/lxc-auto
boot or reboot the system to start using lxc.
originally committed in 2cde10b950
reverted in 039912dec5
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
Allow the user to specify the level at which irqbalance assumes the cache
domains are partitioned. Keep the default value of 2.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
- Handle bool values correctly. We get the values as bool, but collectd
requires a bool value to be numeric in the range [0, 1].
- Remove profile and mode values. Those are strings, which cannot be
represented by collectd.
- Update collectd type for some values.
- Fix latn value being present twice.
Signed-off-by: Dominik Riebeling <bluebrother@posteo.de>
Tested lantiq/xrx200
Maintainer: Markus Weipert suggested to hand over to me, thank you!
Compile tested: SDK for OpenWrt 21.02.3
Run tested: xRX200 rev 1.2, AVM FRITZ!Box 7360 V2, OpenWrt 21.02.3
Description:
Updated to version 0.13.1
Signed-off-by: Tom Stöveken <tom@naaa.de>
write_http plugin is already built and shipped in
collectd-mod-write_http, however it is not possible to configure it via
uci currently, instead having to rely on populating the config file manually.
Add support by adding 2 functions, process_write_http() and
process_write_http_node(). First one just enables/disables the plugin.
The second one, in the spirit of the curl plugin, adds support for
populating multiple <Node> elements under <Plugin write_http> with
support for a few parameters. Those are:
* name. The name of the <Node>. Mandatory
* URL. Mandatory
* Format. Optional.
* User. Optional.
* Password. Optional.
* Timeout. Optional.
* BufferSize. Optional.
Signed-off-by: Alexandros Kosiaris <akosiaris@gmail.com>
Instead of waiting for interface to be up,
wait for it to have IPs, as this is what we need.
Also do not call procd_open_instance when not ready.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Apply post-1.9.0 patch from upstream to fix a segfault.
savedptr can be NULL, so guard for that.
Fixes#18741
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Upstream has finally patched the UI communication socket
creation to happen only if the irqbalance UI is enabled.
As we do not use the irqbalance UI, we can remove
our local fix implemented by 4f0c847828.
(If you want to enable irqbalance UI, the fix is still needed.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
What's Changed:
- fix TestLocalComposeUp which fail locally and bump compose-go to
1.2.7 by @glours
- attach only to services declared by project applying profiles by
@ndeloof
- Add ddev's e2e test by @ulyssessouza
- Fix local run of make e2e-compose-standalone by @ulyssessouza
- fix: prevent flickering prompt when pulling same image from N
services by @maxcleme
- add tags property to build section by @glours
- update golang version to 1.18 by @glours
- bump compose-go to 1.2.6 by @maxcleme
- add e2e tests to verify env variables priority by @glours
- Import dotenv file to os environment by @ulyssessouza
New Contributors:
- @maxcleme made their first contribution
Signed-off-by: Javier Marcet <javier@marcet.info>
Not every radio has also ubus support. Only query radios with ubus
functions.
Signed-off-by: Nick Hainke <vincent@systemli.org>
[fixup, call ubus.connect() once per scrape]
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
What's Changed:
- Fix relative paths on envfile label by @ulyssessouza
- down: Reject all arguments by @Jille
- Clarify what default work dir is when multiple compose files by
@quite
- compose down exit=0 if nothing to remove by @ndeloof
- cp command: copy to all containers of a service as default
behaviour by @glours
- Fix extra space printed with --no-log-prefix option by @jan4843
- bump compose-go to 1.2.5 by @ndeloof
New Contributors:
- @Jille made their first contribution
- @quite made their first contribution
- @jan4843 made their first contribution
Signed-off-by: Javier Marcet <javier@marcet.info>
The audit package in the packages feed share the same sources as the
libaudit package in the base repo. libaudit performs a host build, used
only by libsemanage in base.
There is no package depending on 'audit/host', so we can remove it to
avoid possible confusion.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Both audit in the packages feed and libaudito from the base repo use the
same sources.
Have 'audit' use a different build directory than 'libaudit' package to
avoid interference between them.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Linux 5.15 does not have the linux/ipx.h header.
The patch is a partial cherry-pick (skipped ChangeLog) of upstream
commit 6b09724c6 ("Make IPX packet interpretation dependent on the ipx
header file existing").
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
The postinst script is sourced during image build, which causes the
follow failure:
/home/stijn/Development/OpenWrt/openwrt/build_dir/target-x86_64_musl/root-x86/etc/init.d/lxc-auto: line 3: /lib/functions.sh: No such file or directory
postinst script ./usr/lib/opkg/info/lxc-auto.postinst has failed with exit code 1
Sourcing /lib/functions.sh is not needed, as /etc/rc.common does so
already. Unfortunately removing that line from the init script is not
enough to fix the problem. The postinst script should also check
IPKG_INSTROOT. As these two changes are unrelated, they should go in
separate commits, and the solution to the image build problem is to
revert the commit that introduced the breakage.
This reverts commit 2cde10b950.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This also:
* Adds PKG_SOURCE_DATE and PKG_SOURCE_VERSION to PKG_VERSION (by
default, when PKG_VERSION is defined, PKG_SOURCE_DATE and
PKG_SOURCE_VERSION are not used)
* Fixes package copyright
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
otherwise, a user would have to either manually run /etc/init.d/lxc-auto
boot or reboot the system to start using lxc.
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
Few minor changes, like -h flag for program (help).
Added URL to package definition.
No new version release with version number, so version stays
as is, but pkg_release is still bumbed with this commit.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
- CRIU: add support for different manage cgroups modes.
- the hook processes inherit the crun process environment if there is no environment block specified in the OCI configuration.
- exec: fix double free when using --apparmor and --process-label.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
A minor update to the CNI libraries and tooling.
This does not bump the protocol / spec version, which remains at v1.0.0.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
This fixes CVE-2022-24884.
Also update the package URL to match the source repository.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
a7a7c732c0
changed package pinning from commit hash to version for some dependencies
(but not all, libnetwork is still referenced by commit)
Support the version-based pinning mechanism in addition to commit-based
Signed-off-by: Andy Dodd <atd7@cornell.edu>
What's Changed:
- Fix search/replace typo in --no-TTY documentation by @ericfreese
- Fix panic with down command when -p flag specified by @glours
- use project we just created to start services by @ndeloof
- include services declared by links as implicit dependencies by
@ndeloof
- pull to respect pull_policy by @ndeloof
- don't ignore error by @ndeloof
- project name MUST be lowercase by @ndeloof
- add support for build secrets by @ndeloof
- create also a checksums.txt file, add --binary by @MaxPeal
- add support for ppc64le for docker compose by @snehakpersistent
- inspect image ID after pull to se com.docker.compose.image by
@ndeloof
- Fix cannot setup IPAM gateway by @qnap-ericfan
New Contributors:
- @ericfreese made their first contribution
- @MaxPeal made their first contribution
- @snehakpersistent made their first contribution
- @qnap-ericfan made their first contribution
Signed-off-by: Javier Marcet <javier@marcet.info>
Even though commit 96ec989ed ("mtools: update to 4.0.39") correctly
dropped libbsd dependency, the package's configure script will still
link to it if the library is found.
Tell configure not to look for it by setting ac_cv_lib_bsd_main=no.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
listen_ipv6 config option is removed and we now
listen on both ipv4 and ipv6 addresses.
HTTP keepalive is enabled and set to 70s by default.
With uhttpd-mod-lua there is a small change in behavior,
all code is loaded/parsed/executed once on startup as before,
but now each request is executed in his own fork, so we can't
keep a state between requests.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
It is costly in transmissions to add all information to each metric.
Instead, only use the "device" as a label and add all other important
labels to the "uptime" metric.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Sshpass does not work well in a few scenarios. Passh is an sshpass
alternative which tries to fix the issues.
Signed-off-by: Clark Wang <dearvoid@gmail.com>
Sexpect is another implementation of Expect which is specifically
designed for shells. It's lightweight and has no dependency on other
packages.
Signed-off-by: Clark Wang <dearvoid@gmail.com>
Bump version to reset PKG_RELEASE counter.
Add missing dependency on ucode-mod-math which is needed for the
mkdtemp() implementation used to format UBI volumes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fix and simplify console output, make sure uvol doesn't break in case
of LVM being installed but not used.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
What's Changed:
- now we use directly the Docker CLI to run autoremove flag should
be p… by @glours
- use ssh config when building from compose up by @glours
- get Tty from container to know adequate way to attach to by
@ndeloof
Signed-off-by: Javier Marcet <javier@marcet.info>
Update the version and add ubnt-manager to the build section.
Fixes: 76f27975a9 (" prometheus-node-exporter-lua: add ubnt-manager collector ")
Signed-off-by: Nick Hainke <vincent@systemli.org>
Shift ARGV until actual parameters start to compensate for older
versions of ucode passing the complete cmdline.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Don't use features which are not yet present in the version of ucode
currently shipped with OpenWrt (such as `fs.access()` or assuming raw
mode by default).
Fix syntax error in main executable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
What's Changed:
- pass interactive flag to ExecOptions for the RunExec command by
@glours
- go.mod: pin k8s version to fix build on go1.16, and update buildx
to v0.8.1 by @thaJeztah
- support cache_from|to|no|pull by @ndeloof
- fix race condition on start-stop e2e tests running in parrallel by
@glours
- Add support of ssh authentications defined in compose file or via
cli… by @glours
- fix typo in ssh option description by @mschoettle
- Takes COMPOSE_PROJECT_NAME into consideration on commands by
@ulyssessouza
- Remove dead warning code by @ulyssessouza
- Fix down command without any resource to delete by @ulyssessouza
- vendor: github.com/containerd/containerd v1.6.2 by @thaJeztah
New Contributors:
- @mschoettle made their first contribution
Signed-off-by: Javier Marcet <javier@marcet.info>
* Fix build which was broken by a wrong path in the Makefile.
Adapt to ucode commit 4618807 ("main: rework CLI frontend"):
* ucode now no longer needs the {% %} around each code file, remove
that and safe one level of indentation.
* ARGV now no longer includes ucode executable and script itself
Fixes: 6350c7bc6 ("uvol: replace with re-write in ucode")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Replace previous Shell draft-quality implementation of uvol with a
rewrite in ucode[1].
While the new code is slightly larger, it performs much better (as
we no longer fork() for parsing strings like in Shell with grep, sed
and friends).
Before:
time uvol list -j
[ ... ]
real 0m 0.82s
user 0m 0.13s
sys 0m 0.10s
After:
time uvol list -j
[ ... ]
real 0m 0.47s
user 0m 0.05s
sys 0m 0.05s
[1]: https://github.com/jow-/ucode
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This package seems to be missing an InstallDev section. Had a compile
failure for an application that needs to compile against libprocps
Signed-off-by: Marko Ratkaj <markoratkaj@gmail.com>
rtl_433 can now use OpenSSL to send data to MQTT/influxDB using TLS.
A separate OpenWrt package has been created where OpenSSL support is
enabled.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
- Adds uptime column
- CPU bar color thresholds update
- Updated container status icons
- Optimize health status event handling
- Adds ppc64le build
- Adds "open in browser" menu option
- Fix CPU count estimation
Signed-off-by: Javier Marcet <javier@marcet.info>
What's Changed:
- don't fail trying to remove container with no candidate by @ndeloof
- recreate container after image has been rebuilt/pulled by @ndeloof
- ps: un-deprecate --filter, and enhance docs by @thaJeztah
- Bump github.com/spf13/cobra from 1.3.0 to 1.4.0 by @dependabot
- Remove DEPRECATED text, since it's just the default by
@ulyssessouza
- Bump Buildx to v0.8.0 by @ndeloof
- kill only need project name by @ndeloof
- don't remove external volumes/networks by @ndeloof
- use docker/cli RunExec and RunStart to handle all the
interactive/tty/* terminal logic by @ndeloof
- Validate doc on pr by @glours
Signed-off-by: Javier Marcet <javier@marcet.info>
* Improve listing of ethernet devices under Linux
* Add support for modern Npcap DLLs
* Fix embedding of images with modern GCC versions
* coding style cleanups and refactoring
* added support for:
- Datto AP440
- Datto AP840
- Datto AP840E
- Datto TW420
- Plasma Cloud PAX1800
Signed-off-by: Sven Eckelmann <sven@narfation.org>
All current node_exporter netclass metrics will be available. This includes
speed metrics per lan port on supported DSA switches.
Signed-off-by: René Treffer <treffer@measite.de>
Provide a new variant, nano-full, that enables almost
all functionality of nano. Only libmagic file type detection
has been left out.
Ship with a minimal /etc/nanorc that the user can modify.
nanorc documentation at
https://www.nano-editor.org/dist/latest/nanorc.5.html
Provide color highlighting for the uci config files.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
'uvol list' was broken when introducing support for the hidden volumes.
Fix that by not using 'continue' keyword to break the loop (as that
lead to skipping 'json_select ..') and using if-clause instead.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add the poemgr package. This package is required to control the PSE
controller for the PoE outputs on the Ubiquiti UniFi Switch Flex.
Signed-off-by: David Bauer <mail@david-bauer.net>
Version 2.03.15 - 07th February 2022
====================================
Remove service based autoactivation. global/event_activation = 0 is NOOP.
Improve support for metadata profiles for --type writecache.
Use cache or active DM device when available with new kernels.
Introduce function to utilize UUIDs from DM_DEVICE_LIST.
Increase some hash table size to better support large device sets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
1.5.0 - 27 January 2022, Ludovic Rousseau
- Add support of
- ACS ACR1281U
- Circle CCR7125 ICC
- Circle CIR125 ICC
- Circle CIR125-DOT ICC
- Circle CIR215 CL with iProduct 0x2100
- Circle CIR315 DI
- Circle CIR315 with idProduct: 0x0324
- Circle CIR315 with idProduct: 0x7004
- Circle CIR415 CL
- Circle CIR515 ICC
- Circle CIR615 CL
- Circle CIR615 CL & 1S
- ELYCTIS CL reader
- Nitrokey Nitrokey 3
- Thales Shield M4 Reader
- Add support of simultaneous slot access on multi slots readers
- Use FeliCa instead of Felica on SONY request
- Fix SafeNet eToken 5110 SC issue
- Allow vendor control commands for Omnikey 5427 CK
- always compute readTimeout to use a value greater than default 3 seconds
- Check the bSeq value when receiving a CCID frame
- Avoid logging errors when a reader is removed
- Some other minor improvements
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
1.9.5: Ludovic Rousseau 4 December 2021
- pcscd: autoexit even if no client connects
- Fix variable substitution in systemd units
- fix potential race conditions with powerState handling
- Add and use tag TAG_IFD_DEVICE_REMOVED
- UnitaryTests: port code to Python 3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This adds a recipe, Py3Build/InstallBuildDepends, that installs the
requirements listed in HOST_PYTHON3_PACKAGE_BUILD_DEPENDS. This allows
other (non-Python) packages to install host Python packages by calling
this recipe, without having to know the internals of python3-package.mk.
This also updates apparmor to call this recipe.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
The function udev_enumarte_scan_devices returns a value less than 0 on
failure. If this is the case then we terminate the read for this smart
information.
This change was already send upstream. And could be delete in feature
collectd versions.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This was not a real fix but a workaround. It is no longer clear to me
why this was necessary. Deleting the patch restores the upstream
behaviour of the collected for the smart plugin. I have tested it and on
my system the hard disk to be monitored is recognised.
root@system ~ # cat /sys/class/block/sda/uevent
MAJOR=8
MINOR=0
DEVNAME=sda
DEVTYPE=disk
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
What's Changed:
- use plain text progress when ansi=never is set by @ndeloof
- build full compose model from resources, then filter by services by
@ndeloof
- add run with dependencies e2e test by @glours
- add support for device_cgroup_rules by @ndeloof
- composeService to use dockerCli's In/Out/Err streams by @ndeloof
- fix generated YAML missing an "examples" section, and update
cli-docs-tool to v0.4.0 by @thaJeztah
Signed-off-by: Javier Marcet <javier@marcet.info>
- add missing runtime depency catatonit
- removed SELinux variant, add config option for it instead, I do not believe we need variant of EVERY SELinux support capable software
- add config option for iptables firewall setup in default cni network config, otherwise skip iptables part (part of nftables transition, use cni-plugins-nft for nftables fw support or better; forget about cni fw completely, instead use openwrt's own as that way your rules for containers do not disappear on firewall restart)
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Show error message instead of segfaulting in case of an invalid URL
being read from UCI config.
Fixes: #17971
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
What's Changed:
- 2.3.2:
- Fix json format for version command by @victor-timofei
- filter containers after project has been rebuilt from resources by
@ndeloof
- publish a draft release with auto generate release notes by
@glours
- map --interactive to StdinOpen by @ndeloof
- 2.3.1:
- Support COMPOSE_IGNORE_ORPHANS for compose run by @PIG208
- don't try to start dependencies when there are none by @ndeloof
- don't failed when trying to stop or rm services with no containers
ru… by @glours
- 2.3.0:
- Don't wait forever for unhealthy dependencies by @benesch
- Add progress output while waiting for dependencies by @benesch
- Discard env_file section on convert/config by @ulyssessouza
- Return only numbers in short version by @guillaumerose
- Don't SetRawTerminal() when exec is run with -T by @x-yuri
- only remove volumes set by compose file by @ndeloof
- Set NetworkMode correctly according to network priorities by
@laurazard
- go.mod: github.com/buger/goterm v1.0.4 by @thaJeztah
- Fix typo in reference/compose_up.md by @danBamikiya
- Fix pause/unpause by only applying to running containers by
@ulyssessouza
- use CustomLabels for composeV2 metadata and not impact service
hash by @ndeloof
- use golangci-lint-action by @ndeloof
- Adds support to list the config files on docker compose ls by
@KoditkarVedant
- declare --volume as an alias for --volumes by @ndeloof
- bump buildx to 0.7.1 by @ndeloof
- Wait and scale 0 by @glours
- Bump github.com/containerd/containerd from 1.5.8 to 1.6.0 by
@dependabot
- COMPOSE_REMOVE_ORPHANS can be set to always apply --remove-orphans
by @ndeloof
- Using start, stop, restart from outside the working directory
using --project-name (#9147) by @arhemd
- exclude com.docker.compose.image label from service hash by
@ndeloof
- Bump compose-go 1.0.9 by @ulyssessouza
- Bump compose-go 1.1.0 by @ulyssessouza
- Bump docker/distribution -> v2.8.0 by @ulyssessouza
- report external volume name not found by @ndeloof
- Bump github.com/containerd/containerd from 1.6.0 to 1.6.1 by
@dependabot
- CONTRIBUTING.md file. Update slack sign-up link by @teror4uks
- Add function to convert strings to bool by @ulyssessouza
- Add -i and -t to run and exec by @ulyssessouza
Signed-off-by: Javier Marcet <javier@marcet.info>
added patch with following features:
- forces table family always to inet instead of ip or ip6.
- force fw4 table using
- change default chain names for fw4
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
fixes error: format not a string literal and no format arguments [-Werror=format-security] during compile
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
- Patch had became obsolete, it's contents were merged to upstream. Patch removed.
- Version updated, long list of changes is available at https://github.com/containers/podman/releases
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Without this change these settings:
Mode: Restart Interface
Period: 30s
Check Interval: 5s
will do ping every 30s, if all pings are fail then
it try to take action every 5 second.
After apply this patch watchcat will try to send
ping every 5 second in next 30 sec before take action if
all pings are fail.
This is important for wireless uplinks like 3G/4G that
need some time to establish connection.
Signed-off-by: Rozhuk Ivan <rozhuk.im@gmail.com>
When you have enabled full Native Language Support, it could not be
compiled due to this error:
ccache_cc -o src/update-mime-database src/update-mime-database.p/update-mime-database.c.o -L/mox-master/build/staging_dir/toolchain-aarch64_cortex-a53_gcc-11.2.0_musl/usr/lib -L/mox-master/build/staging_dir/toolchain-aarch64_cortex-a53_gcc-11.2.0_musl/lib -Wl,--as-needed -Wl,--no-undefined -DPIC -fPIC -specs=/mox-master/build/include/hardened-ld-pie.specs -znow -zrelro -Wl,-rpath,/mox-master/build/staging_dir/target-aarch64_cortex-a53_musl/usr/lib -Wl,-rpath-link,/mox-master/build/staging_dir/target-aarch64_cortex-a53_musl/usr/lib -Wl,--start-group /mox-master/build/staging_dir/target-aarch64_cortex-a53_musl/usr/lib/libglib-2.0.so -L/mox-master/build/staging_dir/target-aarch64_cortex-a53_musl/usr/lib -lintl /mox-master/build/staging_dir/target-aarch64_cortex-a53_musl/usr/lib/libxml2.so -Wl,--end-group
/mox-master/build/staging_dir/toolchain-aarch64_cortex-a53_gcc-11.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/11.2.0/../../../../aarch64-openwrt-linux-musl/bin/ld: cannot find -lintl
collect2: error: ld returned 1 exit status
It happens also on gcc
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* Winchester discs can take a long time to spin up which results in
blockd also taking a while to complete to start.
* Make sure uvol only gets started once blockd is ready.
* Clean up paths (use '/tmp/run/uvol' everywhere instead of relying on
the '/var' -> '/tmp' symlink)
* Create 'apk' folder when initializing .meta volume.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
./configure scripts compiles&runs test so it detects darwin
C-functions and defines that can not be used for Linux target.
This patches expicitly specifies Linux-specific parameters that
can not be detected correctly on Darwin.
This patch removes 010-mandoc-1.14.5-fix-gnu-make.patch. mandoc
provides its own way to redefine specific parameters (using
configure.local file). Defines from this patch are moved to
generated configure.local file.
CONFIGURE_VARS are removed by this patch due to ./configure script
does not use ENV vars specified by CONFIGURE_VARS
This commit does not change compilation on Linux hosts (the resulted
binary is exactly the same as before applying this commit). Binary
compiled on MacOS host is exactly the same as compiled on Linux.
Files generated by ./configure (config.h and Makefile.local) are
exactly the same on Linux and MacOS build hosts
Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
Fallback to use 'sdcard' image in case there is neither 'sysupgrade'
nor 'combined' image available.
This allows using 'auc' on targets where 'sdcard' image is also used
for sysupgrade (such as some mvebu-based devices with eMMC).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Calling 'block umount' results in *all* devices listed in
/etc/config/fstab being unmounted.
Just call 'umount /dev/$devname' directly instead as that has the
desired effect.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
