ibmariadb 10.2 needs to be linked in together with iconv.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry picked from commit 7a0aebbff2)
Commit ae5ee6ba6c added support for inbound
firewall rule support but some corner cases were not covered.
In case net-snmp is started and the network interface is already up
the procd firewall rule is created but not applied by fw3 as
service_started calling procd_set_config_changed firewall was missing.
When stopping net-snmp clean up the net-snmp inbound firewall rules in
iptables by calling procd_set_config_changed firewall in stop_service
which will trigger fw3 to remove the inbound firewall rules.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 0bd19db049)
libbsd gets picked up since it's no longer limited to glibc.
Patch identical to libtalloc one. Same codebase.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 33dc529e00)
Use $(CP) instead of $(INSTALL) so that libtdb.so.1 is installed as
symlink, and not duplicated.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
(cherry picked from commit 75d9ab331d)
Automatic detection of the arm architecture does not work well.
http://downloads.lede-project.org/snapshots/faillogs/arm_arm1176jzf-s_vfp/packages/node/compile.txt
```
../deps/v8/src/arm/assembler-arm.cc:176:2: error: #error "CAN_USE_ARMV7_INSTRUCTIONS should match CAN_USE_VFP3_INSTRUCTIONS"
#error "CAN_USE_ARMV7_INSTRUCTIONS should match CAN_USE_VFP3_INSTRUCTIONS"
^~~~~
```
https://github.com/openwrt/packages/issues/5728
Explicitly set cpu arch optimization flag to the compiler option so that "configure" script correctly identifies "arm version".
(Raspberry Pi Zero W)
Raspbian:
```
raspberrypi:~ $ echo | gcc -dM -E - | grep ARM_ARCH
```
OpenWrt (cross-env):
```
ubuntu:~ $ echo | ./arm-openwrt-linux-muslgnueabi-gcc -dM -E - | grep ARM_ARCH
```
```
ubuntu:~ $ echo | ./arm-openwrt-linux-muslgnueabi-gcc -mcpu=arm1176jzf-s -dM -E - | grep ARM_ARCH
```
Also specifying an option lines compactly.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 3482320c2a)
modify patch.
https://github.com/nodejs/node/pull/19196
made not to use libressl headers
fix to include path not to use "host/include"
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
(cherry picked from commit 818770d273)
* Update nano editor to 3.1
* Apply a post-release upstream patch to fix compilation
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit af86b17064)
Fix the init script to allow access from IPv6 subnets of the interface
specified in allow section in /etc/config/chrony.
Fixes issue #7039.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
The following error shows that mysqlnd depends on functions
provided by hash:
root@OpenWrt:/etc/php7# php-cli -m
PHP Warning: PHP Startup: Unable to load dynamic library
'mysqlnd.so' (tried: /usr/lib/php/mysqlnd.so (Error
relocating /usr/lib/php/mysqlnd.so: PHP_SHA256Final: symbol
not found), /usr/lib/php/mysqlnd.so.so (Error loading shared
library /usr/lib/php/mysqlnd.so.so: No such file or
directory)) in Unknown on line 0
So let's model this dep in package metadata.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Bugfix release. Full changelog at:
https://mosquitto.org/blog/2018/08/version-151-released/
Of most interest to OpenWrt:
* Remove use of AI_ADDRCONFIG, which means the broker can be used on systems where only the loopback interface is defined.
* Fix IPv6 addresses not being able to be used as bridge addresses.
* Fix problem opening listeners on Pi caused by unsigned char being default.
* Fix segfault on startup if bridge CA certificates could not be read.
* Fix possible endian issue when reading the memory_limit option.
* library and client bugfixes including: https://github.com/openwrt/packages/issues/6765
Signed-off-by: Karl Palsson <karlp@etactica.com>
Backport Rosen's commit in master to 18.06 to address open CVEs. This
fixes:
CVE-2017-11613
CVE-2018-5784
CVE-2018-7456
CVE-2018-8905
CVE-2018-10963
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This update includes fixes for the following CVEs:
- CVE-2018-1115
- CVE-2018-10925
- CVE-2018-10915
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Currently external modules and non-base packages are numbered
from their own internal number space, and even though the Perl
ABI number is embedded into them this isn't externally visible.
For example, perl-html-parser-3.72.1 could be built for ABI
5.26 or for 5.28, we can't easily tell. This changes all of
that by embedding the ABI number into the filename.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit 0d9584724f)
Bump minor version. Bugfix release. 100% backward compatible.
Includes fixes for:
CVE-2018-3064
CVE-2018-3063
CVE-2018-3058
CVE-2018-3066
Also includes CPPFLAGS fix from master (to get fortify-source headers
etc.).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* fix restart behaviour after successful connection
* fix labeling of faulty stations
* optimize re-connect behaviour at locations where multiple uplinks with
the same SSID are in range
* use procd pidfile handling
* refine logging
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit bc78ad8200)
Since https://git.openwrt.org/d0e0b7049f88774e67c3d5ad6b573f7070e5f900,
OpenWrt SDKs ship the appropriate sources for building usbip userspace
packages, so special nonshared handling is not required anymore.
Sucessfully tested by compiling usbip utilities for various architectures
using self built SDKs after applying the change linked above.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit eded6ed7cf)
Refresh patches 900 and 910.
Add fix (920) for improperly gated variable.
Add workaround (020) for Storable's run-time check for stacksize.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit b94744496f)
Since Travis runs as a batch job and logs are typically looked at
after-the-fact (if at all), there's not any point to seeing progress
when cloning git repos.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit fc3beffeff)
The internal nameservers and the DHCP default domain should be
squirted into /tmp/resolv.conf.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit db6adb616d)
Looking at Configure and Porting/config.sh, it seems that Perl
requires both of these options to build correctly.
Should fix FS #1464.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
nut-monitor failed to create required dir /var/etc/nut, as
well as failing to set appropriate user on the directory and
conf files. Fixing this closes
https://github.com/openwrt/packages/issues/6644
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
(cherry picked from commit 98fdf16ecb)
We need to force this since a *.m4 file is patched.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
(cherry picked from commit 6543859dab)
OpenWrt changed the way the uci shell parsing functions deal with list
configuration items.
This change broke the generation of the privoxy runtime configuration
because no callbacks were emitted anymore.
Fix the problem by defining a list_cb() that simply calls the existing
option_cb() to deal with list item values.
Ref: c9c0fc28a9 ("base-files: fix UCI config parsing and callback handling")
Ref: https://forum.lede-project.org/t/openwrt-snapshot-privoxy-error/15919
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3113d62393)
The sources for usbip are within the kernel. A patch that was included
with the package, which changed the old signal name SIGCLD to the new
one, SIGCHLD, was merged upstream. However, different targets use
different kernel versions. Current version 4.14 and 4.9 are fine, but
older versions do not have the patch applied. So, I used
-DSIGCLD=SIGCHLD to please both worlds.
libudev-fbsd currently used by openwrt does not implement the
udev_device_get_devpath function. eudev's implementation of libudev
sets it as (src/libudev/libudev-device.c):
udev_device->devpath = udev_device->syspath + strlen("/sys");
I used a command-line define to use the same logic, as it works with
new and old versions of the kernel--the use of ..devpath is quite
recent.
I also linked with libbsd, when using glibc.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
(cherry picked from commit 633fe0dbdf)
