This fixes misleading errors in the status file, and increases buffer
sizes to match the python implementation.
Signed-off-by: Karl Palsson <karlp@etactica.com>
At the moment ss-server seems to be the only component using these two
options. It also accepts "local_address" of either ip4 or ip6 address,
but the meaning is different from that of ss-local, ss-tunnel etc.
where it is for listen bind
With this commit, we start deprecation process of uci option
"bind_address". The name was replaced with "local_addr" in upstream
project commit 5fa98a66 ("Fix #1911") and available as json config
option "local_address". This upstream change was released in 3.2.0
Link: 4a42da641b
Link: https://github.com/openwrt/packages/issues/12931
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Config files
/etc/freeradius3/policy.d/accounting
/etc/freeradius3/policy.d/filter
/etc/freeradius3/proxy.conf
/etc/freeradius3/sites-available/default
and link
/etc/freeradius3/sites-enabled/default
are in the freeradius3 package and are mentioned in the main config file
/etc/freeradius3/radiusd.conf
Thus, they must be explicitly specified in the Makefile.
File
/etc/freeradius3/sites/default
is not included in the package, is not created during installation,
is not mentioned in the main config file and should therefore be excluded
from the Makefile.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
netifd is clever enough to handle the peerdns and default route
arguments, so we can just let them get passed along, and when
ppp-up invokes proto_send_update, netifd will only apply what
is needed
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Do not manually overwrite the paths of gdbus-codegen or glib-mkenums
in the ModemManager package build, as modifying the configure.ac ends
up requiring a full autoreconf.
Since MM 1.14, git builds or autoreconf-ed source package builds
require autoconf-archive installed in the build system, and so the
build would fail if this happens.
The update to overwrite the paths was to force using the gdbus-codegen
and glib-mkenums provided by the "host" glib2 package instead of the
"target" glib2 package (see fa8ad6e69c),
but these tools are really the same in both as they're python
programs, arch independent.
Tested in a local build where the setup detects and uses the correct
glib tool paths from the target:
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/gdbus-codegen
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/glib-mkenums
Fixes https://github.com/openwrt/packages/issues/12958
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
This is to make explicit the conditional select of libunwind is only
needed for libopenvswitch. If we spill it over other packages, the
generated kconfig will have recursive dependency issue. 2 new patches
were made for this goal
The other thing is that "+libunwind" will cause it to be built if any of the
packages defined in this Makefile is enabled (y or m). This is at the moment
by-design of the build system.
Libunwind does not support architectures like arc. Use conditional select To
avoid (libunwind) build failures like the following,
checking for ELF helper width... configure: error: Unknown ELF target: arc
make[3]: *** [Makefile:65: /data/openwrt/build_dir/target-arc_arc700_uClibc/
libunwind-1.3.1/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 1
Things like "+PACKAGE_openvswitch-libopenvswitch:libunwind" will also result in
recursive deps error for chains of 3 nodes. Kconfig construct like the
following will be made
config A
tristate
select B
depends on !(C) || (x)
config B
tristate
select C
config C
tristate
config x
bool
Other changes include
- Shared use of variable ovs__common_depends was removed
- Ovn doc build was patched out
Link: https://github.com/openwrt/packages/pull/12959#issuecomment-665021413
Reported-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Simplified Makefile as a result of meson transition.
Fixed license information.
Updated URL.
Added patch to fix linking issue.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If two openfortivpn scripts are started at the same time, a race
condition can occur where the conditional evaluates to true, but the
symlink exists by the time the other script tries to create it
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Block restart of the interface if the openfortivpn fails to authenticate.
Without this check, with a bad password, netifd will continually
hit the VPN endpoint with connection attempts
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Add a hotplug script to reload nlbwmon's config after interface
ifup actions.
That should improve the detection of the IPv6 LAN address
that can get enabled a bit later in the boot process.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit cde2a77ed3.
Applying this change has shown that it is even quicker to provoke the
race condtition on simultan mwan3 commands execution.
By reversing the change we have the same behaviour as before.
But the race condition on mwan3 execute at the same time still exists.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This adjustment of the locks fixes the race condition when a mwan3
hotplug script and a mwan3 command are running at the same time.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This new config section in package openvswitch
supports creating a named bridge, and setting
its' OpenFlow controller end-point.
An example config is included in /rom/etc/config/openvswitch
Signed-off-by: Simon Kinane <skinane@fb.com>
- New major version (LTS release)
- Update haproxy download URL and hash
- Remove obsolete dladdr1-dependency-patch as it has been upstreamed
- USE_REGPARM is obsolete and therefore removed from our Makefile
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Make the plain nginx version the same as nginx-ssl.
In a further change we will replace nginx by a dummy package,
depending on +nginx-ssl instead. This allows a smooth upgrade.
For nginx-util leave the ssl and the ssl-nopcre versions only.
For nginx-mod-luci remove the duplicate ssl version.
Replace the removed packages by dummies for a smooth upgrade.
The dummy packages will be removed after a transition period.
Additionally, enable the http2 module for nginx-ssl by default
and cleanup the nginx.init file.
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
- Fixes CVEs:
CVE-2019-12519
CVE-2019-12520
CVE-2019-12521
CVE-2019-12523
CVE-2019-12524
CVE-2019-12525
CVE-2019-12526
CVE-2019-12527
CVE-2019-12528
CVE-2019-12529
CVE-2019-12824
CVE-2019-12854
CVE-2019-13345
CVE-2019-18676
CVE-2019-18677
CVE-2019-18678
CVE-2019-18679
CVE-2020-8449
CVE-2020-8450
CVE-2020-11945
CVE-2020-14058
CVE-2020-15049
- Remove patch for cross-compilation
The patch should not be included in the OpenWrt at all without any
commit message/description.
Is not needed and there should be used HOST variables instead of BUILD variables (e.g.
HOSTCXX)
However, the BUILDCXX is set in Makefile to HOSTCXX
- Renumber glibc patch and refresh it
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
If the uci option family is not set in the interface section, then there
is no default value set as in the `config_load / config_get` API.
The problem here is that if the family is not set, the default value ipv4
is normaly assumed. But the comparison fails here because the value is empty
and therefore the dedicated routing table for this interface is not compared
with the other routes from the main table and so not updated.
To fix this set the default value for this config option which is`false`
for enabled and `ipv4` for family.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This fixes routing handling. Introduced with the last version update.
The following message disappears on the shell
when mwan3 is called with 'mwna3 restart`.
`Error: Invalid gateway address.`
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
[aaronjg@stanford.edu: fully unset variable and handle ipv4 as well]
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
default rule only applied to ipv4 with dest_ip 0.0.0.0/0
and error was hidden when trying to apply it in ip6table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
allow use of curl rather than ping to test if a host
is up since a host may not respond to ping, but an
https request is part of the openfortivpn connection,
so this is a more reliable test
also clean up overly verbose logging
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Split musl patch into multiple small ones. Much easier to reason about.
Removed stack protector patch. This is not an issue anymore.
Removed NLS support. There seems to be a linking issue as
libiconv-stub does not have a shared library component.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Changed URL to new upstream.
Use PKG_INSTALL for consistency between packages.
Use PKG_BUILD_PARALLEL for faster compilation.
Remove outdated patch.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- prevent rapid overlap in DHCP script updates
- check and allow localhost forwards with specific applications
- add option for rate limiting inbound queries
- change UCI list to table format with Unbound conf references
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Includes:
- dawn_uci: no need uci_alloc_context on each uci_set_network call
- test_storage: extend test harness; datastorage: two bug fixes
- tcpsocket: free con after ustream write error and make list each safe
list_each is not safe against removal of list entry
Signed-off-by: Nick Hainke <vincent@systemli.org>
Simplifies the Makefile and allows faster compilation with Ninja.
Added patch to fix libmariadb dependency.
Added extra modules.
Speed Before:
time make package/lighttpd/compile -j 12
Executed in 47.91 secs fish external
usr time 41.83 secs 384.00 micros 41.83 secs
sys time 10.79 secs 37.00 micros 10.79 secs
Speed After:
time make package/lighttpd/compile -j 12
Executed in 19.67 secs fish external
usr time 42.79 secs 377.00 micros 42.79 secs
sys time 8.56 secs 37.00 micros 8.56 secs
Tested with fish shell.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Since we use now procd for xinetd, we have to start the service with the
option `-dontfork` to make procd happy.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
It seems even modern stuff doesn't support v2 correctly. The miniupnp
suite does but other stacks seem to lack support. Default to v1 to
avoid the headache.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added PKG_LICENSE_FILES.
Added PKG_BUILD_PARALLEL for faster compilation.
Simplified configure arguments.
Small cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Due to a missing config load function call, mwan3 start runs ifup for an empty
list of interfaces, thus not calling ifup at all.
This commit introduces the missing config_load call.
Signed-off-by: Michiel Blokzijl <code@m01.eu>
The init file of darkstat is creating the pid in /var/empty and
setting the owner of the directory to darkstat which is incompatible
with sshd as sshd requires /var/empty to be owned by root and not
group or world-writable. See issue #12420.
This corrects the problem by creating another directory: /var/darkstat
instead without setting the owner, which is not actually required.
Compile tested: not applicable as the changes do not involve
compilation.
Tested on my home router running darkstat.
Signed-off-by: Jean-Michel Lacroix <lacroix@lepine-lacroix.info>
Tidy up some minor patch fuzz with a refresh.
Also tweak the linux makefile to make it run on macosx and linux:
install only understand -m for filemode, not that the openwrt staging
dir understands file modes. Also glibc>2.17 so patch out the check that
otherwise barfs a number of errors from a missing 'ldd' command under
macos.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
When listening to a udp port an Illegal instruction occurs.
This did NOT happen when compiled with debug on.
Fixes issue openwrt#4747, FS#2937
Signed-off-by: Rick Frankland <rfrankla@yahoo.com>
This adds PKG_BUILD_PARALLEL:=0 to packages that depend on host Python
packages (HOST_PYTHON3_PACKAGE_BUILD_DEPENDS), because installing
packages with multiple concurrent pip processes can lead to errors or
unexpected results[1].
This also:
* Move HOST_PYTHON3_PACKAGE_BUILD_DEPENDS definitions to before
python3-package.mk is included
* Update Python folder readme to include PKG_BUILD_PARALLEL:=0
[1]: https://github.com/pypa/pip/issues/2361
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Jool v4.1.0 suffers from bad offload management as well as broken
stateful NAT64 translation. See upstream issues #331 as well as #332 for
more information.
Downgrade to v4.0.9 until these are ironed out.
Tested on: ipq40xx-generic
Fixes commit 0a6891feac ("jool: update to v4.1.0")
Signed-off-by: David Bauer <mail@david-bauer.net>
As miniupnpd is running as root, libcap(-ng) can be used to limit its
capabilities.
libcap-ng is very small, so this isn't a problem.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The two unique packages "Unbound light" and "Unbound heavy"
were not working well due to the fact that Unbound is mostly
its library. Tools and helpers would crash. Instead a reasonable
default Unbound is built. Also up select options like python
are added. libevent and libpthreads are options to down select.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Disable several options to enable compilation.
Simplified several configure options.
Remove pointless configure var.
Added ssh hinting patch. Some SSH incompatibility.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Use the newly introduced configure script.
Use PKG_INSTALL for consistency between packages.
Use PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Add new subpackage containing pam authentication module. Shouldn't
affect dependencies and nothing changes, there is just one more module
enabled for people interested in it.
Signed-off-by: Michal Hrusecky <michal@hrusecky.net>
If miniupnpd is installed but disabled or not running, the hotplug
script will query uci for keys that don't exist and grep a temporary
config file that doesn't exist, resulting in the following errors:
uci: Entry not found
grep: /var/etc/miniupnd.conf: No such file or directory
These would arise when an interface is brought up or down, and are
more confusing than helpful, especially when miniupnpd is disabled.
Suppress these errors.
Signed-off-by: David Ehrmann <ehrmann@gmail.com>
b933f9cf0cb254e368027cad6d5799e45b237df5 in base made several changes
to OpenWrt's libssp support. It seems this workaround is no longer
needed.
Simplified the configure script slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
