555268b ubus: filter neighbors by SSID when preparing nr
3db9607 data storage: match SSID when searching ap entry
a22f5a7 storage: ensure SSID strings are NULL-terminated
Signed-off-by: Nick Hainke <vincent@systemli.org>
Makefile changes include:
* Remove USE_UCLIBC, as uclibc is no longer supported
* Package output modules
* Move main binary (back) to /usr/sbin, as it is system administration
related and requires superuser privileges
New patches:
* 003-add-space-for-null-byte.patch - from
374cfd2cab
* 004-more-specific-library-linking.patch - from
27b57d9da3
* 005-use-c99-format-macro-constants.patch - from
https://github.com/fln/addrwatch/pull/28
Init script changes include:
* Change from explicit disable to explicit enable, so that the service
is disabled by default and on first install
* Set config option default values to default values of the main binary
* Fix command-line option names and format (from
https://forum.openwrt.org/t/cant-start-addrwatch-service/60499/3)
* Always use the --quiet command-line option, as the procd instance is
not configured to capture stdout/stderr
* Change the syslog config option to start the syslog output module
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Until now the additional tables listed in gobal 'rt_table_lookup' were
not considered for interfaces.
In order to be able to also use interface-defined routes from tables
other than main, consider also tables listed in 'rt_table_lookup'.
Update version to 2.10.10 as requested by maintainer.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* add a tcpdump option to resolve IPs in adblock reporting,
set 'adb_represolve' accordingly (disabled by default). If enabled
tcpdump will perform a reverse DNS (PTR) lookup for each IP address
* add 'stalkerware' source (provided by @astryzia)
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
This option sets the interface of the policy.
Also from Vincent Wiemann <vincent.wiemann@ironai.com>.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Use list's where appropriate for multi-value config variables.
Forbid absolute/relative paths for certificate and key files.
Get rid of last remnants of left/right naming.
Factor invariant code paths.
Drop redundant secrets.rsa.filename section.
Thanks to Vincent Wiemann <vincent.wiemann@ironai.com> for calling
out many of these improvements.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
We enable the option by default, but do not depend on the kernel modules
required for L2TP offloading to avoid wasting space when the feature is
not needed. To use offloading, kmod-l2tp-eth must be installed.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
The UMAC-based methods provide higher performance than GMAC and aren't
suspectible to timing attacks when implemented in software (which is
always the case on OpenWrt, as OpenSSL support is disabled). Disable
GMAC by default to save a few KiB.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Switch to AUTORELEASE to avoid bumping PKG_RELEASE all the time.
Run shell scripts through shfmt -w -ci -bn -sr -s in order to have a
standard style.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Give this package more love by adopting it :)
Changes since 1.4.1-4:
* change maintainer to me
* update to 1.4.3
+ add example config files sockd.conf and socks.conf
+ add service file for sockd
* update 200-fix-RTLD_NEXT.patch
- remove merged 210-deactivate-sched_setscheduler.patch
* fix Autoconf build file
Signed-off-by: David Yang <mmyangfl@gmail.com>
Add limited procd support to handle config reload
Option drop_unknown_ports can be used to ensure that only configured ports
are part of the bridge
Signed-off-by: Felix Fietkau <nbd@nbd.name>
As a daemon service, respawn is expected by default, and we have that
facility available via procd.
Suggested-in: https://github.com/openwrt/packages/pull/15272
Signed-off-by: Karl Palsson <karlp@etactica.com>
If pppoe is used for wan access. script set 'eth1' as interface for curl
call. The correct interface is however 'pppoe-wan'.
The script uses 'network_get_physdev' function to get real device for
bind_network but this is wrong. We need instead the l3_device of the the
logical interface.
In case if we don't use pppoe connection - 'l3_device' is equal to real device.
This was reported by the github user `welderpb` with P/R:
https://github.com/openwrt/packages/pull/14431
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The chrony interface hotplug script reuses the handle_allow function
from the init script to allow NTP access on interfaces specified in uci.
The function requires /lib/functions/network.sh. Include the file in the
hotplug script to make the function work as expected.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
Fix a possible security issue with OpenSSL config autoloading on Windows (CVE-2021-3606).
Include a number of small improvements and bug fixes.
remove upstreamed: 115-fix-mbedtls-without-renegotiation.patch
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
There were closing curly braces missing and it was checking for empty
strings while it should have been checking for non-empty strings.
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
Variables set in config_ipsec() need to be shared with do_postamble()
function, so change scoping to parent (prepare_env()).
Also, remove unused settings like "remote_sourceip", "reqid", and
"packet_marker".
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Link to abandoned packages PR: https://github.com/openwrt/packages-abandoned/pull/18
AppleShare products have been unused for a while now (since Mac OS 9.2.2)
around 2002.
So, there should be fewer users requiring this package.
Last update of netatalk was in December 2018. Not sure if newer updates
will be created.
It's time to cut the cord on our end and move it to the abandoned packages.
Info: https://en.wikipedia.org/wiki/AppleShare
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Support for wolfSSL has been upstreamed to the master OpenVPN branch
in f6dca235ae560597a0763f0c98fcc9130b80ccf4 so we can use wolfSSL
directly in OpenVPN. So no more needed differnt SSL engine for OpenVPN
in systems based on wolfSSL library
Compiled && tested on ramips/mt7620, ramips/mt7621
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
configure script looks for host ssh. Just pass the configure variable
directly. --with-ssh doesn't work.
Also get rid of custom Compile section. It's not needed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* fix a small json syntax issue in adblock.sources
* add easylist addon to reg_fr source
* add switch 'adb_fetchinsecure' to allow insecure downloads
without certificate check (disabled by default)
* better explain 'adb_fetchparm' in readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
This is a security and bugfix release.
Full release notes: https://mosquitto.org/blog/2021/06/version-2-0-11-released/
Fixes a remotely triggered memory leak
Fixes broker reconnections in certain failure situations
Fixes (non-standard) qos0 queuing
Signed-off-by: Karl Palsson <karlp@etactica.com>
Isochronous round trip time tool.
Useful for measuring one-way send or recv delay between hosts,
among other things.
Signed-off-by: Marcel Vital <ralmina@tuta.io>
Remove myself as maintainer from PowerDNS Related packages and add
Peter van Dijk from PowerDNS as the new maintainer
Signed-off-by: James Taylor <james@jtaylor.id.au>
ipsec uses starter, and reads /etc/ipsec.conf (which then includes
/var/ipsec/ipsec.conf, etc). This is overly complicated, and can
be problematic if you're using both swanctl and ipsec for migration.
Running charon directly from procd via the init.d script avoid
all of this.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Seeing the following error when running 'make defconfig':
tmp/.config-package.in:69874:warning: multi-line strings not supported
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Sierra Wireless modems need the string '$GPS_START' to be sent to the
GPS tty device as only then the modem firmware starts emitting
NMEA-0183 sentences.
Add an option 'sierragpsstart' to kplex' serial driver to support that
quirk as kplex can be very useful to spread GPS data over the network
while also supplying 'ugps' using a PTY, allowing for correct system
time to be set automatically on boot up from GPS.
This patch is also PR'ed at the upstream project:
https://github.com/stripydog/kplex/pull/54
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes the build problem below.
Package miniupnpd is missing dependencies for the following libraries:
libmnl.so.0
libnetfilter_conntrack.so.3
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
- New upstream major release with tons of new features and LTS (see: https://www.haproxy.com/blog/announcing-haproxy-2-4/)
- Update haproxy download URL and hash
- Activate promtheus exporter support the new way (using USE_PROMEX=1)
- Cleaned up haproxy-specific CFLAGS
- Changed the halog build to make use of the new Makefile target (admin/halog/halog)
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Rrsync is a perl script that is supplied as an extra with the rsync program.
It must be used in conjunction with openssh-server or openssh-server-pam
as it requires ~/.ssh/authorized_keys which is not supported by dropbear.
Rrsync allows selective access to subdirectories in either read-only, write-only or read-write,
depending on settings in authorized_keys. This allows for safe, restrictive access.
It's particularly useful for automated backup purposes.
An example usage would be this entry:
command="/usr/bin/rrsync -ro /home" <public key here>
This would allow a system connecting with this public key to be able to rsync FROM the
/home directory tree only. It could not write to this directory, nor read from any other directory.
Signed-off-by: Matt Reeve <matt@mreeve.com>
