Netbird is similar vpn service as tailscale and zerotier.
Description:
NetBird is an open-source VPN management platform built on top of WireGuard® making it easy to create secure private networks for your organization or home.
It requires zero configuration effort leaving behind the hassle of opening ports, complex firewall rules, VPN gateways, and so forth.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
These patches should not be backported to OpenWrt, otherwise tproxy
won't work for devices connected to br-lan (bypassed by the fw rules).
We have introduced a new compile-time flag for new version (which
is not released yet), but it's unnecessray to backport redudant
patches as here is still at the old version.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Also added patch that is from alpine's same package to assist building on musl.
Hostpkg build on musl also kept failing, so I added few more overrides, which
made it work perfectly.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* add oisdbig as new feed
* LuCI frontend preparation:
- the json feed file points always to /etc/banip/banip.feeds (and is no longer compressed)
- supply country list in /etc/banip/banip.countries
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
easydns.com has supported IPv6 for awhile now using
the same update URL as IPv4. This duplicates the IPv4
entry for IPv6 to enable support for it.
Signed-off-by: James Buren <braewoods+mgh@braewoods.net>
* fix a potential race condition during initial startup (after flash) which leads to a "disabled" service
Signed-off-by: Dirk Brenken <dev@brenken.org
Signed-off-by: Dirk Brenken <dev@brenken.org>
add lighttpd-mod-webdav_min package alternative to lighttpd-mod-webdav
lighttpd-mod-webdav_min is more minimal than full lighttpd-mod-webdav.
lighttpd-mod-webdav_min does not support PROPPATCH, LOCK, UNLOCK, and
by not supporting those methods, removes dependencies on libxml2,
libsqlite3, and libuuid.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
- complete rewrite of banIP to support nftables
- all sets are handled in a separate nft table/namespace 'banIP'
- for incoming blocking it uses the inet input hook, for outgoing blocking it uses the inet forward hook
- full IPv4 and IPv6 support
- supports nft atomic set loading
- supports blocking by ASN numbers and by iso country codes
- 42 preconfigured external feeds are available, plus local allow- and blocklist
- supports local allow- and blocklist (IPv4, IPv6, CIDR notation or domain names)
- auto-add the uplink subnet to the local allowlist
- provides a small background log monitor to ban unsuccessful login attempts in real-time
- the logterms for the log monitor service can be freely defined via regex
- auto-add unsuccessful LuCI, nginx, Asterisk or ssh login attempts to the local blocklist
- fast feed processing as they are handled in parallel as background jobs
- per feed it can be defined whether the input chain or the forward chain should be blocked (default: both chains)
- automatic blocklist backup & restore, the backups will be used in case of download errors or during startup
- automatically selects one of the following download utilities with ssl support: aria2c, curl, uclient-fetch or wget
- supports a 'allowlist only' mode, this option restricts internet access from/to a small number of secure websites/IPs
- provides comprehensive runtime information
- provides a detailed set report
- provides a set search engine for certain IPs
- feed parsing by fast & flexible regex rulesets
- minimal status & error logging to syslog, enable debug logging to receive more output
- procd based init system support (start/stop/restart/reload/status/report/search)
- procd network interface trigger support
- ability to add new banIP feeds on your own
- add a readme with all available options/feeds to customize your installation to your needs
- a new LuCI frontend will be available in due course
Signed-off-by: Dirk Brenken <dev@brenken.org>
* update default config for new oisd.nl lists
* conf.update file to migrate oisd.nl lists to the new format
* introduce AdBlockPlus lists support (new oisd.nl format)
* longer wait for WAN up/gateway detection
* make load_environemnt only execute once to suppress duplicate
warnings/errors
PS. While I was testing this, oisd.nl has brought back the old domains
lists as well, so this version supports both as I'm unclear as to
why the "big" ABPlus list is only 6.2Mb where as the "big" domains
list is whopping 19.9Mb.
Signed-off-by: Stan Grishin <stangri@melmac.ca>
This version adds compatibility with OpenSSL 3.0.
There's a patch, submitted upstream, to fix building without SSL.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
The tranmission UCI config options
- `config_overwrite`
- `incomplete_dir_enabled`
- `watch_dir_enabled`
are all booleans, so we have to retrieve them using `config_get_bool` in order
to make sure they are properly interpreted in case the user sets them to a
keyword (`true`/`false`, `on`/`off` etc.) and not an integer (`0`/`1`).
Signed-off-by: Salim B <git@salim.space>
Samba4 running as Active Directory Domain Controller with the internal
DNS backend requires the nsupdate binary with GSSAPI support.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* add boot() function which waits for network.interface to come up
* switch oisd.nl hosts entry to domains
* remove erroneous oisd substitution from config-update file
Signed-off-by: Stan Grishin <stangri@melmac.ca>
- Update tailscale to version 1.36.0
- Patch iptables support
Tailscale does not (yet) support nftables.
Tailscale allows running with --netfilter=off allowing
end-user to create his own firewall rules, but this
affects only tailscale cli, not tailscaled daemon, so
connection cannot be made without error telling that
tailscaled was unable to determine execute iptables
for determining it's version.
There is a work-around for those who do not want
nft-iptables compatibility package; they can create
a script to /usr/bin/iptables which responds to
--version argument and echos fake version string
and on any other arguments or no arguments, just exits.
After this procedure and starting tailscale cli with
netfilter off- it works. Openwrt has moved on to
nftables, so iptables manipulation seems unnecessary.
Especially for other reasons, on Openwrt, firewall
should be configured on it's own, because firewall
rules made by other software, such as tailscale,
loose their firewalling rules when firewall restarts.
So I patched it to allow "fake" iptables pointing
to executable /bin/false and ignoring version
request. And I also set cli to default to
netfilter off setting.
If still end-user wants to use iptables, this
patch does not make it impossible; just install
iptables, or nft-iptables, and run tailscale
with argument --netfilter=on and it works out
as it did before, tailscaled daemon still
matches with iptables if it is found in $PATH.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Update crowdsec-firewall-bouncer to latest upstream release version 0.0.25
Signed-off-by: S. Brusch <ne20002@gmx.ch>
Maintainer: Kerma Gérald <gandalf@gk2.net>
Run tested: ipq40xx/generic, Fritzbox 4040, Openwrt 22.03.3
Rework:
- now based on uci config file
- create nftables tables and chains in initd script
Fixes CVEs:
- CVE-2022-3924: Fix serve-stale crash when recursive clients
soft quota is reached.
- CVE-2022-3736: Handle RRSIG lookups when serve-stale is
active.
- CVE-2022-3094: An UPDATE message flood could cause named to
exhaust all available memory. This flaw was addressed by adding
a new "update-quota" statement that controls the number of
simultaneous UPDATE messages that can be processed or
forwarded. The default is 100. A stats counter has been added to
record events when the update quota is exceeded, and the XML and
JSON statistics version numbers have been updated.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Changes in version v2.4.3 - 2023-01-16
- Fix version number in version.go
(Changes for v2.5.1 are missing)
Signed-off-by: Nick Hainke <vincent@systemli.org>
They were added in these commits [1] [2] and if they are not included,
the RIPE Atlas SW Probe does not work correctly.
This should also prevent this from happening in the future as it now. We include all
files with .sh extension file type.
[1] 70ced29fc3
[2] 71a4ff0e68
Fixes: https://github.com/openwrt/packages/issues/20338
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
When CC is set to e.g. "ccache mips-openwrt-linux-musl-gcc" it needs
to be quoted to avoid word splitting on substitution.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Add hosting.de provider. To use dynamic DNS you have to create a DDNS
host with a separate DDNS user.
Note: As of 2023-01-17 hosting.de does not work with wget which will
fail with `400: Bad Request` (it will work with `--auth-no-challenge`).
You should use curl instead. I have reported that to the provider.
Signed-off-by: Benjamin Drung <bdrung@bdrung.de>
Bugfixes:
* better error information for empty tid/mark and failure to resolve domains
* better handling of entries in /etc/iproute2/rt_tables
* update packages definitions and descriptions
* remove firewall4 from dependencies to prevent dependency recursion
Updates:
* introduce nft_user_set_policy and nft_user_set_counter to control options for
user nft sets this service creares
* use counters in internal nft sets
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Changes in version v2.4.2 - 2023-01-13
- Issue 40208: Enhance help info for capacity flag
- Issue 40232: Update README and fix help output
- Issue 40173: Increase clientIDAddrMapCapacity
- Issue 40177: Manually unlock mutex in ClientMap.SendQueue
- Issue 40177: Have SnowflakeClientConn implement io.WriterTo
- Issue 40179: Reduce turbotunnel queueSize from 2048 to 512
- Issue 40187/40199: Take ownership of buffer in QueuePacketConn QueueIncoming/WriteTo
- Add more tests for URL encoded IPs (safelog)
- Fix server flag name
- Issue 40200: Use multiple parallel KCP state machines in the server
- Add a num-turbotunnel server transport option
- Issue: 40241: Switch default proxy STUN server to stun.l.google.com
Signed-off-by: Nick Hainke <vincent@systemli.org>
ChangeLog file excert:
Fri Dec 30 12:51:11 AM CET 2022
Releasing gnunet-fuse 0.19.1: fix build for GNUnet 0.19.0+.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The gnURL-fork of cURL is no longer maintained as cURL finally supports
probing and selecting the TLS implementation at run-time.
Hence just build a gnuTLS-backed variant of libcurl, use patchelf to
change the shared object name, call the result libcurl-gnutls and be
done. Other distributions have opted for similar solutions.
In future we could convert the curl package to provide build-variants
for each TLS implementation; however, this is out of the scope of the
needs of GNUnet which used to be only user of libgnurl.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The safe-search package creates symlinks in a configured additional
hosts directory. The link targets are inside another directory which
has to be made available to dnsmasq as well.
Now that support for adding additional paths to dnsmasq was added by
commit openwrt/openwrt@aa12a0fdd1
implement adding this path using the existing uci-defaults script.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Libreswan will set DEFAULT_DNSSEC_ROOTKEY_FILE from the LINUX_VARIANT
variable, which is taken from the ID field in /etc/os-release. This
points to the host file, which is wrong.
Set both variables when calling make.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
ztDNS is a dedicated DNS server for a ZeroTier virtual network.
ztdns is alternative to zerotier's own zeronds.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Disable libmaxminddb detection to fix a build error
due to missing dependency.
(the libmaxminddb library is now detected, but is unncessary.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Disable libmaxminddb detection to fix a build error due to
missing dependency.
(the libmaxminddb library is now detected, but is unncessary.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
modify build command for meson type: feature options
remove -Dwith_libev=disabled (option no longer has any effect)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Besides updating the package to 1.20.1, this commit removed two patches
that the new release made unnecessary.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
* Use Boolean true for enable inline mode which is more intuitive that older ''
* Add skeleton section for openappid since it has been merged[1]
1. 2d4e7d5fd3
Signed-off-by: John Audia <therealgraysky@proton.me>
Use UCI to add temporary incoming firewall rule to accept http traffic for
challenge verification.
This should make uacme compatible with OpenWrt's fw3/4 implementation.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
This prevents a forwarding server named like ::1@5453 from being added
to unbound.conf as a forward-host instead of the correct forward-addr.
forward-host requires the name to be resolved, which is impossible in
the absence of another nameserver. Thus, forwarding-only configurations
referencing only the IPv6 loopback address with a port number were
broken.
Signed-off-by: Mark Mentovai <mark@mentovai.com>
This is a fix for the the following change:
3d824ea288
Before the change, it was only possible to execute a shell script. To
remove this restriction, a binary or other script language can now also
be used for 'mwan3.user'. Unfortunately, the old shell script was not
executable for older mwan3 version. During a sysupgrade with config transfer,
this 'mwan3.user' script could not be executed for newer mwan3 versions.
To fix this, the calling script checks whether the 'mwan3.user' is executable,
and if not, this executable bit is now set.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Quoting the changelog:
Changes in version 0.4.7.12 - 2022-12-06
This version contains a major change that is a new key for moria1. Also, new
metrics are exported on the MetricsPort for the congestion control
subsystem.
o Directory authority changes (moria1):
- Rotate the relay identity key and v3 identity key for moria1. They
have been online for more than a decade and refreshing keys
periodically is good practice. Advertise new ports too, to avoid
confusion. Closes ticket 40722.
o Minor feature (Congestion control metrics):
- Add additional metricsport relay metrics for congestion control.
Closes ticket 40724.
o Minor features (fallbackdir):
- Regenerate fallback directories generated on December 06, 2022.
o Minor features (geoip data):
- Update the geoip files to match the IPFire Location Database, as
retrieved on 2022/12/06.
o Minor bugfixes (cpuworker, relay):
- Fix an off by one overload calculation on the number of CPUs being
used by our thread pool. Fixes bug 40719; bugfix on 0.3.5.1-alpha.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Quoting the changelog:
Changes in version 0.4.7.11 - 2022-11-10
This version contains several major fixes aimed at helping defend against
network denial of service. It is also extending drastically the MetricsPort
for relays to help us gather more internal data to investigate performance
and attacks.
We strongly recommend to upgrade to this version especially for Exit relays
in order to help the network defend against this ongoing DDoS.
o Directory authority changes (dizum, Faravahar):
- Change dizum IP address. Closes ticket 40687.
- Remove Faravahar until its operator, Sina, set it back up online
outside of Team Cymru network. Closes ticket 40688.
o Major bugfixes (geoip data):
- IPFire informed us on August 12th that databases generated after
(including) August 10th did not have proper ARIN network
allocations. We are updating the database to use the one generated
on August 9th, 2022. Fixes bug 40658; bugfix on 0.4.5.13.
o Major bugfixes (onion service):
- Set a much higher circuit build timeout for opened client rendezvous
circuit. Before this, tor would time them out very quickly leading to
unnecessary retries meaning more load on the network. Fixes bug 40694;
bugfix on 0.3.5.1-alpha.
o Major bugfixes (OSX):
- Fix coarse-time computation on Apple platforms (like Mac M1) where
the Mach absolute time ticks do not correspond directly to
nanoseconds. Previously, we computed our shift value wrong, which
led us to give incorrect timing results. Fixes bug 40684; bugfix
on 0.3.3.1-alpha.
o Major bugfixes (relay):
- Improve security of our DNS cache by randomly clipping the TTL
value. TROVE-2021-009. Fixes bug 40674; bugfix on 0.3.5.1-alpha.
o Minor feature (Mac and iOS build):
- Change how combine_libs works on Darwin like platforms to make
sure we don't include any `__.SYMDEF` and `__.SYMDEF SORTED`
symbols on the archive before we repack and run ${RANLIB} on the
archive. This fixes a build issue with recent Xcode versions on
Mac Silicon and iOS. Closes ticket 40683.
o Minor feature (metrics):
- Add various congestion control counters to the MetricsPort. Closes
ticket 40708.
o Minor feature (performance):
- Bump the maximum amount of CPU that can be used from 16 to 128. Note
that NumCPUs torrc option overrides this hardcoded maximum. Fixes bug
40703; bugfix on 0.3.5.1-alpha.
o Minor feature (relay):
- Make an hardcoded value for the maximum of per CPU tasks into a
consensus parameter.
- Two new consensus parameters are added to control the wait time in
queue of the onionskins. One of them is the torrc
MaxOnionQueueDelay options which supersedes the consensus
parameter. Closes ticket 40704.
o Minor feature (relay, DoS):
- Apply circuit creation anti-DoS defenses if the outbound circuit
max cell queue size is reached too many times. This introduces two
new consensus parameters to control the queue size limit and
number of times allowed to go over that limit. Closes ticket 40680.
o Minor feature (relay, metrics):
- Add DoS defenses counter to MetricsPort.
- Add congestion control RTT reset counter to MetricsPort.
- Add counters to the MetricsPort how many connections, per type,
are currently opened and how many were created.
- Add relay flags from the consensus to the MetricsPort.
- Add total number of opened circuits to MetricsPort.
- Add total number of streams seen by an Exit to the MetricsPort.
- Add traffic stats as in number of read/written bytes in total.
- Related to ticket 40194.
o Minor features (fallbackdir):
- Regenerate fallback directories generated on November 10, 2022.
o Minor features (geoip data):
- Update the geoip files to match the IPFire Location Database, as
retrieved on 2022/11/10.
o Minor bugfixes (authorities, sandbox):
- Allow to write file my-consensus-<flavor-name> to disk when
sandbox is activated. Fixes bug 40663; bugfix on 0.3.5.1-alpha.
o Minor bugfixes (dirauth):
- Directory authorities stop voting a consensus "Measured" weight
for relays with the Authority flag. Now these relays will be
considered unmeasured, which should reserve their bandwidth for
their dir auth role and minimize distractions from other roles. In
place of the "Measured" weight, they now include a
"MeasuredButAuthority" weight (not used by anything) so the
bandwidth authority's opinion on this relay can be recorded for
posterity. Lastly, remove the AuthDirDontVoteOnDirAuthBandwidth
torrc option which never worked right. Fixes bugs 40698 and 40700;
bugfix on 0.4.7.2-alpha.
o Minor bugfixes (onion service client):
- A collapsing onion service circuit should be seen as an
"unreachable" error so it can be retried. Fixes bug 40692; bugfix
on 0.3.5.1-alpha.
o Minor bugfixes (onion service):
- Make the service retry a rendezvous if the circuit is being
repurposed for measurements. Fixes bug 40696; bugfix
on 0.3.5.1-alpha.
o Minor bugfixes (relay overload statistics):
- Count total create cells vs dropped create cells properly, when
assessing if our fraction of dropped cells is too high. We only
count non-client circuits in the denominator, but we would include
client circuits in the numerator, leading to surprising log lines
claiming that we had dropped more than 100% of incoming create
cells. Fixes bug 40673; bugfix on 0.4.7.1-alpha.
o Code simplification and refactoring (bridges):
- Remove unused code related to ExtPort connection ID. Fixes bug
40648; bugfix on 0.3.5.1-alpha.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Now that we're packaging flent itself, there's no reason to have a
completely separate flent-tools package. So integrate the flent-tools
package specification into the main flent package so it's always kept in
sync.
Also add a dependency from flent itself on flent-tools, as the shell
versions of those utilities that Flent uses when running tests doesn't work
on the busybox shell included with openwrt.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Update the Flent package and move it to net/, renaming it to just 'flent'
instead of python3-flent (it's not a library, having the python3- prefix
makes no sense). Also add python3-defusedxml as a dependency to protect
against XML bombs if using the one of the backends that use XML-RPC, and
trim the dependencies to those used directly by Flent.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Traditionally, Snort rules are based upon packet analysis. OpenAppID
enables detection of applications/cloud applications on the network.
This package provides OpenAppID and signature files used by OpenAppID to detect
network traffic from certain applications can be used to identify rogue
application use, detect malicious applications and implement various
application policies, such as application blacklisting, limiting application
usage, and enforcing conditional controls.
To use, for example, edit /etc/snort/local.lua and add the following section
at a minimum:
appid = {
app_detector_dir = '/usr/lib/openappid',
log_stats = true,
app_stats_period = 60,
}
Signed-off-by: John Audia <therealgraysky@proton.me>
The haproxy hotplug script creates a 'combined' certificate bundle that
contains both the certificate chain and the private key. However, having a
daemon hotplug script write into CERT_DIR is not great; so let's provide
the bundle as part of the main acme framework, keeping it in $domain_dir
and just linking it into CERT_DIR. That way we can keep CERT_DIR as just a
collection of links for everything, that no consumers should need to write
into.
Also make sure to set the umask correctly so the combined file is not
world-readable (since it contains the private key).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
The acme-acmesh package hardcoded the certificate path in its hook script.
Now that we export it as a variable we can avoid hard-coding and use the
variable version instead. Also factor out the linking of certificates into
a function so it's not repeated.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
The contract between the acme-common framework and consumers and hook
scripts is that certificates can be consumed from /etc/ssl/acme and that
web challenges are stored in /var/run/acme/challenge. Make this explicit by
exporting $CERT_DIR and $CHALLENGE_DIR as environment variables as well,
instead of having knowledge of those paths depend on out-of-band
information. We already exported $challenge_dir, but let's change it to
upper-case to make it clear that it's not a user configuration variable.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
state_dir is actually a hardcoded value in conffiles. Allowing users to
customize it could result in losing certificates after upgrading if they
don't also specify the dir as being preserved. We shouldn't default to
this dangerous behavior.
With the new ACME package, certificates live in the standard location
/etc/ssl/acme, users who need to do certificate customizations should
look for them in that dir instead.
Signed-off-by: Glen Huang <i@glenhuang.com>
