Upstream project's behaviour of reporting this data source in range 0-1
is used by at least CentOS 7 collectd 5.8.1, very likely the same
behaviour is also in widely use by other distributions.
The change is important for providing consistent experience across
collectd deployments on different environments
Ref: https://github.com/collectd/collectd/pull/3244
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 2f66fa5c23)
Ref: https://github.com/openwrt/luci/issues/3308
Add the OpenWrt TARGET_LDFLAGS to the compile command to activate PIE support
for the io tool when it is activated globally in OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
(cherry-picked from b46d21a54e)
On 64 bit Linux systems long is 8 bytes long, on 32 bit Linux systems it
is 4 bytes long. Here we want to print 4 bytes and not 8 bytes, use int
instead of long.
This fixes printing 4 bytes on 64 bit systems.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry-picked from 9936e16b72)
Only when /dev/mem is opened with O_SYNC the write and *read* is done
uncached. We saw wrong values read out from the hardware without setting
O_SYNC, the busybox devmem tool showed different values, when O_SYNC is
also set for the io tool, it reads out the same values as devmem.
When looking at the drivers/char/mem.c file in the kernel it is behaving
differently based on the O_DSYNC flag.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
(cherry-picked from 90df0f3e24)
Indeterminably vim/host fails on the build bots:
objects/fileio.o: In function `readfile':
fileio.c:(.text+0x5b3f): undefined reference to `libiconv_close'
fileio.c:(.text+0x61ad): undefined reference to `libiconv_close'
fileio.c:(.text+0x62f6): undefined reference to `libiconv'
fileio.c:(.text+0x6794): undefined reference to `libiconv_close'
objects/fileio.o: In function `buf_write_bytes':
fileio.c:(.text+0xa1fe): undefined reference to `libiconv'
fileio.c:(.text+0xa54a): undefined reference to `libiconv'
objects/fileio.o: In function `buf_write':
fileio.c:(.text+0xaf48): undefined reference to `libiconv_close'
objects/mbyte.o: In function `my_iconv_open.part.18':
mbyte.c:(.text+0x2ced): undefined reference to `libiconv_open'
mbyte.c:(.text+0x2d3a): undefined reference to `libiconv'
mbyte.c:(.text+0x2d5f): undefined reference to `libiconv_close'
objects/mbyte.o: In function `convert_setup_ext':
mbyte.c:(.text+0x33bf): undefined reference to `libiconv_close'
objects/mbyte.o: In function `string_convert_ext':
mbyte.c:(.text+0x363c): undefined reference to `libiconv'
collect2: error: ld returned 1 exit status
link.sh: Linking failed
Makefile:1949: recipe for target 'vim' failed
This is addressed by pulling in libiconv/host. Also configure switches
are added that keep external dependencies to a minimum, for instance
avoiding to link to X11 or gettext.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry-picked from dc727a2430)
This allows collectd to get data of Mikrotik devices in a improved way than via SNMP.
closes#10327
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
cherry-pick does not apply cleanly changed PKG_RELEASE number.
(cherry picked from commit 4261f45734)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This is not a C++ project.
Added PKG_BUILD_PARALLEL for faster compilation.
Cleaned up Makefile to modern standards.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from b288514308)
Added patches sent upstream to fix usage with uClibc++.
Cleaned up license information.
Added several size optimizations.
Several other Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This package adds support for /etc/shinit and ~/.shinit files, which
contain commands to be run at the start of all interactive shells.
(/etc/profile and ~/.profile are read for login shells only.)
This is useful for those who regularly open non-login, interactive
shells, for example users of GNU Screen or tmux.
(This is based on a patch[1] I submitted for OpenWrt master, but there
does not appear to be much interest in merging the change.)
(This package uses the ENV shell variable, of which the POSIX standard
has a brief description[2]. The dash manpage[3] also describes how the
ENV variable is handled. (dash is the basis for busybox ash.))
[1]: https://patchwork.ozlabs.org/patch/1094493/
[2]: https://pubs.opengroup.org/onlinepubs/9699919799//utilities/V3_chap02.html#tag_18_05_03
[3]: https://manpages.debian.org/buster/dash/dash.1.en.html#Invocation
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from c04dff7965)
Repository was moved.
Also cleaned up Makefile slightly.
Ran init script through shellcheck.
Added PKG_BUILD_PARALLEL for faster compilation.
Added several CFLAGS and LDFLAGS for smaller size.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from f3245e6c7d)
When passing -Wimplicit-function-declaration
Also got rid of std=gnu89. It's easy to patch out.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from 1b5e4883a4)
Cleaned up Makefile for consistency between packages.
Switched to CMAKE_INSTALL to get rid of the InstallDev section.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from 2e2929366b)
The CONTRIBUTING.md requests an (or multiple) SPDX identifier for GPL
licenses. But a lot of packages did use a different, non-SPDX style with a
"+" at the end instead of "-or-later".
Signed-off-by: Sven Eckelmann <sven@narfation.org>
(cherry-picked from bbb1ea7345)
CFLAGS were not being passed, breaking ASLR builds.
Switched to using PKG_SOURCE_DATE for the version.
Added PKG_BUILD_PARALLEL for faster compilation.
Added license information.
Small Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from 35a258a55c)
This release updates: bcf create --from
There are no dependencies changes introduced by upstream and changes are
of limited character.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
(cherry-picked from commit 7741e5db4b)
This version introduces new option -d that makes service not to exit on
error. This is brutal solution but is required to protect against
service failure when remote resource is down.
bigclown-mqtt2influxdb is service moving data from MQTT to InfluxDB and
both of those services can and potentially are remote. The original
implementation where it failed when service goes down is not ideal
because network outage or target server outage can later require this
service restart.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
(cherry-picked from commti 508e2b865a)
The inclusion of <sys/sysmacros.h> by <sys/types.h> was deprecated and
removed. This is causing major, minor, and makedev to be undefined.
The patch is an upstream commit fixing it.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
It turns out, this breaks only when compiling with both uClibc-ng and
uClibc++. If the libc or libc++ gets swapped out, it compiles fine.
libstdcpp is fine because it already undefs these macros. The actual
bug is probably in uClibc-ng but this is a fine workaround.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from d6af6a4d75)
There is no gain to do device scan in init. Commonly we want to always
scan BTRFS devices to ensure that after boot raids are correctly linked.
It should be done before any init script tries to mount any raid FS.
Comparing init scripts and preinit scripts there are I think two primary
considerations. First is if user is expected to restart/reload/stop
given service on will. I think that there is no such reason for this as
user can easily enough just call btrfs utility it self. Second
consideration is if it makes sense to have it optional. This means if we
want to have ability to enable and disable given service. I think that
there is no such need in this case. It is pretty much doing nothing if
you don't have BTRFS FS connected and when you have you probably want to
scan it.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
This instead of building every tool separately builds one btrfs binary
and additional tools are links to this binary. This is same approach as
busybox is using.
This splits list of tools to two. boxprogs are tools that are boxed to
code btrfs binary and progs are tools that are not.
This also overload default all make target of Build/Compile and instead
builds (unified) btrfs.progs and separate progs.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
- Move Depends under URL
- Fix PKG_LICENSE to use correct SPDX License Identifier instead of
deprecated one
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
New version of musl no longer includes this header internally.
Removed several unnecessary variables in Makefile.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from 4cda68c72b)
Bash is not needed here. These scripts are POSIX compliant.
This was originally added as the configure script looks for /bin/bash
locally. Passing gl_cv_posix_shell overrides this.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from d0e3aa7493)
