Refresh patch 010-cross-compile-fixes.patch
Re-apply patch 020-no-owner-change.patch
Also we need to explicitly disable OpenSSL support.
We may enable it later if needed/requested.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Fix log spam:
daemon.err netdata[2090]: PROCFILE: Cannot open file '/proc/sysvipc/shm'
This is caused by a non existant /proc/sysvipc/shm because of the
CONFIG_PROC_STRIPPED option that is enabled by default in the kernel
generic target config
Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
Makefile does not overwrite par2 path
if par2 is available on build-host it is detected
and then the patch with fixup-config-pl.patch
in install fails because hunk 2 cannot be applied
hunk 2 has $Conf{ParPath} = ''; - so provide an empty path
Signed-off-by: Dirk Neukirchen <plntyk.lede@plntyk.name>
The crude loop I wrote to come up with this changeset:
find -L package/feeds/packages/ -name patches | \
sed 's/patches$/refresh/' | sort | xargs make
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reordered some stuff in the Makefile for consistency between packages.
Refreshed patches.
Added a musl fix.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
It seems to fail locally without it:
Version mismatch error. This is libtool 2.4.6 Debian-2.4.6-2, but the
definition of this LT_INIT comes from libtool 2.4.
You should recreate aclocal.m4 with macros from libtool 2.4.6 Debian-2.4.6-2
and run autoconf again.
Move MAINTAINER up for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This package seems abandoned.
This changes ownership to myself.
It shouldn't be a high-maintenance work to keep it.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Disable ebpf plugin as in OpenWrt there is no package libbpf.
- With that, I need to introduce patch, which is not merged into netdata,
yet. Without it, I still got during cross-compilation this error:
checking for externaldeps/libbpf/libbpf.a... configure: error: cannot check for file existence when cross compiling
- And yes, the flag was there.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
This fixes issues:
syslog-ng[3895]: WARNING: Configuration file format is too old, syslog-ng is running in compatibility mode. Please update it to use the syslog-ng 3.29 format at your time of convenience. To upgrade the configuration, please review the warnings about incompatible changes printed by syslog-ng, and once completed change the @version header at the top of the configuration file; config-version='3.26'
Fixes: 06f3ac21b4 ("syslog-ng: update to
version 3.29.1")
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
new upstream, new release taken from ChangeLog[1]:
New maintainers - after a prolonged period of inactivity from Hisham,
the creator and original maintainer, a team of community maintainers
have volunteered to take over a fork at https://htop.dev and
https://github.com/htop-dev to keep the project going.
1. https://github.com/htop-dev/htop/blob/master/ChangeLog
Signed-off-by: John Audia <graysky@archlinux.us>
Binding in default to IPv6 is preferable but it can be disabled in
kernel and that prevents syslog-ng to start. This setup should not be
that common but syslog is very important service and should survive
that.
This introduces new plugin defining source generator
`network_localhost`. This is used instead of original network source.
Signed-off-by: Karel Kočí <cynerd@email.cz>
Updated to 5.0 LTS version.
Removed 120-uclibc-res.patch
Frontend moved from frontend to ui
zabbix-proxy added libevent dependencie
refresh patches
Compile tested: aarch64 cortex-a53
Run tested: aarch64 cortex-a53
Signed-off-by: Scott Roberts <ttocsr@gmail.com>
Update netdata to 1.22.1
Disable cloud functionality
Shoehorn patches from FreeBSD's ports repo
Remove cloud notifications and netdata's self-update feature
json-c is no longer optional
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Commit 44a16ca broke syslog-ng such that it no longer works with
logrotate, for example. Yes, you can manually stop and start the
service, but (1) you shouldn't have to and (2) it creates a window
where you potentially lose messages if the syslog UDP socket
overruns.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Initially we included user-specific settings last, so that they
could turn off or replace system settings... otherwise we only get
to change what's NOT explicitly set by the system. This is overly
constraining.
Restore the original functionality of allowing the user to
override settings defined by the distribution's configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Since muninlite 2.0 the unpatched upstream also uses
/proc/sys/kernel/hostname. Thus the patch is not necessary anymore.
Signed-off-by: Lars Kruse <devel@sumpfralle.de>
This removes Python-related build variants, and adds
PYTHON3_PKG_BUILD:=0 and minor build adjustments (where appropriate),
for non-Python packages. There should be no changes to build output.
This also updates some include paths for python3-package.mk and/or
python3-host.mk to be relative to the package Makefile.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* follow upstream ressources to github
* rename /usr/sbin/munin-node to /usr/sbin/muninlite
(following the chane of upstream)
* change plugin directory from /usr/sbin/munin-node-plugin.d/
to /etc/munin/plugins (compatible to upstream / munin-node)
* all patches (except one OpenWrt-specific patch) were merged
upstream
Signed-off-by: Lars Kruse <devel@sumpfralle.de>
- Bump version also in the config file
- Move logread to /sbin location instead of /usr/sbin
Because package logd in OpenWrt's ubox Makefile uses /sbin folder and LuCI has
the same path hardcoded in
modules/luci-base/root/usr/share/rpcd/acl.d/luci-base.json and using
different location results that LuCI is not able to load log data as it
is not found.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Added _GNU_SOURCE define to fix compilation warning.
Added patch to fix uclient-fetch as it does not support -nv.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- Add libuv dependency which is now required. Otherwise during
compiling, I have received this error:
configure: error: libuv required but not found. Try installing 'libuv1-dev' or 'libuv-devel'.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
This removes lines that set PKG_BUILD_DIR when the set value is no
different from the default value.
Specifically, the line is removed if the assigned value is:
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
The default PKG_BUILD_DIR was updated[1] to incorporate BUILD_VARIANT
if it is set, so now this is identical to the default value.
* $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_SOURCE_SUBDIR)
if PKG_SOURCE_SUBDIR is set to $(PKG_NAME)-$(PKG_VERSION), making it
the same as the previous case
* $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
This is the same as the default PKG_BUILD_DIR when there is no
BUILD_VARIANT.
* $(BUILD_DIR)/[name]-$(PKG_VERSION)
where [name] is a string that is identical to PKG_NAME
[1]: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e545fac8d968864a965edb9e50c6f90940b0a6c9
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Patch 002 - Force Python3 is no longer applying, let's try to throw it
away to see if it is still necessary
Patch 003 - Was backported from the master branch and it was included in
Netdata version 1.17.0
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
The CONTRIBUTING.md requests an (or multiple) SPDX identifier for GPL
licenses. But a lot of packages did use a different, non-SPDX style with a
"+" at the end instead of "-or-later".
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Remove SSL patch that has been made obsolete by upstream updates.
Update monit package to the latest release: v5.26.0. This release
supports TLSv1.3 and fixes a few bugs and vulnerabilities.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
Netdata adds optional libraries if found, add patch (PR#6658) to avoid pulling in unnecessary libraries.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Updated to 4.0.11 LTS version.
Deleted 003-change-user-and-foreground.patch in according to [ZBX-10611] fixed changing process user owner on startup in foreground when AllowRoot disabled.
Compile tested: Yes, lantiq
Run tested: Yes, lantiq
Signed-off-by: Krystian Kozak <krystian.kozak20@gmail.com>
- Bump version in the config and improve a link for documentation
- Disable snmp destination for now
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
This fixes service stop. Problem was that in default syslog-ng forks to
background which causes procd to loose track of it. It no longer has in
such case PID of syslog-ng process and is unable to stop it. This means
that instance for such process hangs in procd and also it is not
possible to stop it as daemon. Fix is simple. syslog-ng is now
instructed to run in foreground.
This commit also drops unnecessary reload section. In default reload
calls restart and restart in default is implemented as calling stop and
start. This means that effectively it is implemented same as in case of
this init reload service implementation.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
The buildbots do not have zlib installed and therefore cannot build zabbix
checking for zlib support... no
configure: error: Unable to use zlib (zlib check failed)
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Makefile
- Changed URL
- Added LICENSE, CPE ID, more dependencies, postint and prerm scripts
- Enabled by default JSON and HTTP (would be good to split them in future
to sub-packages); Disabled java-modules, tcp wrapper
- Re-ordered CONFIGURE_ARGS as they occur when executing
- Resorted section: define Package/syslog-ng/install
syslog-ng.conf
- include scl.conf
- have a more specific one than upstream (they have it really simple)
- document it
Patch:
remove the unnecessary one
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
This should ensure that updater/opkg won't remove /etc/syslog-ng.d
directory, which would cause syslog-ng to fail to start.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
Changes:
- corrected License
- removed one row, which was removed in version 1.11.0
- replace netdata.conf with the better one (more details in
https://github.com/openwrt/packages/pull/7540)
- refreshed patches
Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
