OpenWrt doesn't provide an argument to Host/Install like LEDE does; use
HOST_BUILD_PREFIX instead, which is available on both.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Also, don't make any assumptions about the staging dir lua and LuaSrcDiet
were installed to.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Simplify the sysupgrade image checksum strings in order to
avoid translating "Checksum xxx" items both for MD5 and SHA256.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Show also the sha256 checksum in addition to MD5 checksum to enable
image verification also for builds with only sha256 checksums.
If the 'sha256sum' command is not present in the system, the value
remains empty.
Note: The easiest way to get the 'sha256sum' command is to compile it
into busybox.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Fix incomplete port status display on vlan setup page when ports in the middle
are not used, e.g. some Lantiq boards use ports 0, 1, 2 and 4 for LAN ports so
JS code should not attempt to reference an undefined status element for port 3.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use a generic default topology if we cannot infer switch information from
board.json and display an error message in this case. Should fix#779 and
similar issues.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Fix the JavaScript String.format() to not trigger an exception if the argument
for an escaped format like %h or %q is undefined.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Wireless monitor interfaces usually have no SSID set in their config and
various network model utility functions did not handle this case properly,
mainly while trying to incorperate the SSID string into various description
labels.
Fall back to the internal network id (radioX.networkY) in cases where neither
the SSID nor the BSSID are available.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
In mod metamethod, execute string format under pcall() and rethrow error in
caller context to report caller of function in errors and not the meta
method itself.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Gracefully handle a missing diag section in /etc/config/luci when rendering
the network diagnostics tool page.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When a wireless network is disabled it can't be removed. From
wifi_overview.htm the delete call is generated as wlan0, wlan1 or
whatever. This wlan is not working because it is disabled, then LuCI
deletes the virtual radio which really is named as wlan0.
This PR fixes an Internal Server Error when requesting the Wireless Informations in luci-mod-freifunk.
It checks an unindexed value "net.iwdata".
```
/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute template dispatcher target for entry '/freifunk/status'. The called action terminated with an exception: /usr/lib/lua/luci/template.lua:97: Failed to execute template 'freifunk/public_status'.
A runtime error occured: [string "/usr/lib/lua/luci/view/freifunk/public_stat..."]:116: attempt to index field 'iwdata' (a nil value) stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:460: in function 'dispatch' /usr/lib/lua/luci/dispatcher.lua:141: in function...
```
signed-off.by: Guido Lipke <lipkegu@gmail.com>
Replace the menu item "Wifi" by "Wireless",
which is already used for page and section headings
This closes#695
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
An lua interpreter is required on the building host to run the
luasrcdiet lua script. Due to a build change, the interpreter was not
being installed to the correct location.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Cleanup /etc/config/ucitrack by removing '6relayd' item,
as the whole 6relayd package was removed in 2014.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This pull request adds a condition, which checks whether the file "/etc/config/fstab" exists before it allows access to "mount points".
Signed-off-by: Guido Lipke <lipkegu@gmail.com>
Otherwize the distrevision may be displayed twice if it contains some special matching patterns.(For example I am using "git-$hash" in my own OpenWrt branch.)
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Add support for dnsmasq uci options 'quietdhcp' and 'sequential_ip'
(disable logging, allocate ip addresses sequentially)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
restore the lookup of the freifunk community-name stored in
uci "freifunk.community.name".
In 9780ee382e
the value changed to the complete path of the community-profile, e.g.
"/etc/config/profile_berlin". This causes lookup problems on other
pages, like "mod-freifunk -> overview -> index" (view/freifunk/index.htm line37, line 54).
And as the option suggests it's the community-name not the community-profile path.
Signed-off-by: Sven Roederer devel-sven@geroedel.de
Fix the underlying _iface_ignore() function to not ignore virtual interfaces,
in order to let ignore_interface() return true for PPP and similar devices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This patch fixes the wrong visualization of Noise Margin (SNR) and Signal Attenuation (SATN) stats
Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
Check the location of the odhcpd leasefile from /etc/config/dhcp
via uci. Fallback to the default location.
This fixes#702
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Using tristate is counter-intuitive and probably doesn't provide a lot
of benefit so we use a boolean and treat "don't know" as false (because
it is safer than showing options that are not actually available).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Fix display of WAN status when WAN is provided by using WWAN device or similar with other similar similar methods.
Explanation:
Before this, protocol was fetched from /etc/config/network for interface which often is wan_4 - but protocol is configured in file as wan, and therefore protocol is always none, since configuration is made for wan and then setup as wan_4 and possibly wan_6 if ipv6 is being used. This commit uses ubus to get used active protocol. For example, in case of qmi, it displays protocol as dhcp since even if I configured wan to use qmi, dhcp was used as a protocol for getting IP address.
Update timezone data to 2016c.
2016b: http://mm.icann.org/pipermail/tz-announce/2016-March/000036.html
Changes affecting future time stamps
New zones Europe/Astrakhan and Europe/Ulyanovsk for Astrakhan and
Ulyanovsk Oblasts, Russia, both of which will switch from +03 to +04
on 2016-03-27 at 02:00 local time. They need distinct zones since
their post-1970 histories disagree. New zone Asia/Barnaul for Altai
Krai and Altai Republic, Russia, which will switch from +06 to +07
on the same date and local time. Also, Asia/Sakhalin moves from +10
to +11 on 2016-03-27 at 02:00.
As a trial of a new system that needs less information to be made up,
the new zones use numeric time zone abbreviations like "+04"
instead of invented abbreviations like "ASTT".
Haiti will not observe DST in 2016.
Palestine's spring-forward transition on 2016-03-26 is at 01:00,
not 00:00. Guess future transitions will be March's last Saturday
at 01:00, not March's last Friday at 24:00.
2016c: http://mm.icann.org/pipermail/tz-announce/2016-March/000037.html
Changes affecting future time stamps
Azerbaijan no longer observes DST.
Chile reverts from permanent to seasonal DST.
Guess that future transitions are August's and May's second
Saturdays at 24:00 mainland time. Also, call the period from
2014-09-07 through 2016-05-14 daylight saving time instead of
standard time, as that seems more appropriate now.
Note for Openwrt usage:
Either musl or busybox does not like the new timezone format.
Although the rule looks ok in /etc/TZ, timezone is interpreted wrongly
by date, uptime etc. "Old timezones" are handle correctly, but these
new "<+04>-4" style zones do not work. Example below:
Europe/Helsinki
root@OpenWrt:~# cat /etc/TZ
EET-2EEST,M3.5.0/3,M10.5.0/4
root@OpenWrt:~# uptime
11:00:52 up 18:17, load average: 0.43, 0.13, 0.11
root@OpenWrt:~# date
Wed Mar 30 11:00:55 EEST 2016
Europe/Astrakhan
( Time is showed as GMT instead of the correct zone and
zone name is parsed wrongly )
root@OpenWrt:~# cat /etc/TZ
<+04>-4
root@OpenWrt:~# uptime
08:02:52 up 18:19, load average: 0.17, 0.18, 0.13
root@OpenWrt:~# date
Wed Mar 30 08:02:59 +04>-4 2016
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
