Also switch the weekday and monthday lists in the firewall rule details to
cbi dropdowns, vastly uncluttering the form.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Do override the iface section id upon commit to avoid clobbering the resulting
configuration. The manual config sync is not needed anymore after switching
to uncached ubus uci operations.
Fixes#1770.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- localize variables
- get rid of redirects breaking apply workflow
- auto-adjust unusable channels when switching country
- use apply/rollback workflow when enabling/disabling networks
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
this was added to LEDE with ed62d91f4b5296a4aa883ce975d76f590ef4e910 and defaults to enable.
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
* make it only visible for 802.11s mesh-networks
* have it enabled by default
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
[add empty line before meshfwd assignment]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Allow user to chose if use FT over DS protocol or
FT over the Air protocol for Fast BSS Transition
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Add local generation of PMK when using a PSK.
So 802.11r is easier to configure and no inter AP
communication is needed any more.
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Currently there are only 2 encryption options visible for adhoc
mode. But in netifd, others are also supported and working as
expected. So adding WPA-PSK, WPA2-PSK and WPA-PSK/WPA2-PSK Mixed
mode as encryption options.
Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com>
Use the new hostapd functionality (in LEDE) to detect 802.11r and 802.11w
more properly. Leave the old logic in place for Openwrt.
Adjust 802.11w default value from "0" to "" in order to avoid unnecessary
"option ieee80211w 0" lines in /etc/config/wireless
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Openwrt theme apparently accepsts slightly different html than
Bootstrap or Material. Cahnge code to <br /> to make it compatible.
This fixes#1011
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The default hostapd/wpad mini version does not support ieee80211w
and the option's visibility in LuCI may lead it to be placed in user's
/etc/config/wireless preventing wifi from starting.
Check for hostapd/wpad full before exposing the option.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Add support for IEEE802.11w Management Frame Protection options.
Mention in the help text that the full version of wpad/hostapd is
needed.
Currently supported by ath9k and ath10k, and in LEDE also by
mwlwifi and mt76.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Add WPA/WPA2-PSK mixed mode to the list of allowed modes
* Add datatype validation to some fields
* Add help texts
* Reformat longest lines
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adds support for 802.11r fast transition to luci.
Corrects the deletion on nasid in issue #844
The R0KH & R1KH options are not perfect as it would be better
to separate out each option and do some sanity checking on
the values, but that is beyond my capabilities.
Signed-off-by: Warren Linton warren@linton.id.au
(squashed from three original commits in #994. commit message reworded)
The same wifi option 'nasid' is used for two purposes,
RADIUS NAS ID and 802.11r NAS ID / R0KH-ID.
In LuCI the 'nasid' option has depended on WPA-EAP/WPA2-EAP, which
can lead to accidental deletion of the option, if the user modifies
any wifi settings while he has WPA(2)-PSK & 802.11r mode.
802.11r can also be with WPA(2)-PSK, so add them to the dependency
list of allowed encryptions.
(Note: after this fix the 'nasid' field is shown unnecessarily
to "normal" WPA(2)-PSK users. It might later be set to depend on
802.11r being used, after 802.11r has been added to LuCI.)
Reference to bugs:
https://github.com/openwrt/luci/issues/844https://dev.openwrt.org/ticket/20764https://bugs.lede-project.org/index.php?do=details&task_id=274
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Reloading the page ensures that the allowed tx power values and channel select
lists are properly populated with the new effective values.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* add more WPA-EAP phase2 authentication methods.
* client cert, client key and key password are only relevant for
WPA EAP-TLS, change dependency accordingly.
* add support for certificates and key for EAP-TLS phase2 auth.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Some applications only support ipv4 so add ipv4only option
to host and hostport datatypes so that for thos applications
that when an IP address is specified only and ipv4 ip address
gets accepted.
* Rename subdirectories to their repective OpenWrt package names
* Make each LuCI module its own standalone package
* Deploy a shared luci.mk which is used by each module Makefile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
2015-01-08 16:26:20 +01:00
Renamed from modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua (Browse further)
