Also switch the weekday and monthday lists in the firewall rule details to
cbi dropdowns, vastly uncluttering the form.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Do override the iface section id upon commit to avoid clobbering the resulting
configuration. The manual config sync is not needed anymore after switching
to uncached ubus uci operations.
Fixes#1770.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- localize variables
- get rid of redirects breaking apply workflow
- auto-adjust unusable channels when switching country
- use apply/rollback workflow when enabling/disabling networks
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When reading the configured mac address of the static lease, filter it
through luci.ip.checkmac() to canonicalize and uppercase the value for
mapping it against the combo box host hints.
Fixes#1772.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The value of cachesize is hardcoded to 10000 in
dnsmasq-2.79/src/option.c to 10000 max
case 'c': /* --cache-size */
{
int size;
if (!atoi_check(arg, &size))
ret_err(gen_err);
else
{
/* zero is OK, and means no caching. */
if (size < 0)
size = 0;
else if (size > 10000)
size = 10000;
daemon->cachesize = size;
}
break;
}
Tested on Netgear R7800
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
In the case of more powerful routers the default
cachesize value == 150 is too small and can easily
be extended to 1,000's and 10,000's of entries.
It makes sense to make it easy configurable.
Tested on Netgear R7800
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Fix whitespace, edit the proposed help text.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Use the new luci.ip MAC address facilities to parse and verify MAC addresses
in a common way, instead of relying on various ad-hoc solutions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Keep the ifname and bridge state backup variables in /etc/config/luci to not
pollute /etc/config/network.
Fixes#1655.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
If no DSL SNR offset is set for the dsl line the first entry from the
dropdown list is pre-selected by default, which would apply a -10 db
offset by default.
Pre-select the 0 db option if nothing else is specified in the uci config
files.
Signed-off-by: Mathias Kresin <dev@kresin.me>
The length of DUID-LL is 80 bits (16 bit DUID type, 16 bit hardware type, 48 bit mac)
which corresponds to 20 nibbles. Also lower the minimum required length of DUID to
20 nibbles in order to allow entering a DUID-LL.
Signed-off-by: Arjen de Korte <build+github@de-korte.org>
this was added to LEDE with ed62d91f4b5296a4aa883ce975d76f590ef4e910 and defaults to enable.
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
* make it only visible for 802.11s mesh-networks
* have it enabled by default
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
[add empty line before meshfwd assignment]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Allow user to chose if use FT over DS protocol or
FT over the Air protocol for Fast BSS Transition
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Add local generation of PMK when using a PSK.
So 802.11r is easier to configure and no inter AP
communication is needed any more.
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Currently there are only 2 encryption options visible for adhoc
mode. But in netifd, others are also supported and working as
expected. So adding WPA-PSK, WPA2-PSK and WPA-PSK/WPA2-PSK Mixed
mode as encryption options.
Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com>
Most users likely want the hostname of a static DHCP lease to be resolveable,
even if the corresponding host is currently offline.
Adjust the form logic to automatically set 'option dns 1' whenever a name is
specified in the static lease entry.
FIxes LEDE FS#815.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This change extends the switch VLAN configuration page to automatically
adjust interface ifname options when altering VLAN settings.
For example "eth0" is changed to "eth0.1" when a previously untagged LAN
VLAN is switched to tagged on the CPU port and vice versa.
Notifications are displayed in the page header if an auto migration was
performed.
This change should make the switch configuration more user friendly and
less prone to soft bricking.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Prevents deletion of the UCI dns boguspriv keyword and explicitly sets it to
either 0 or removes it as the LEDE/Openwrt dnsmasq.conf default is 1 - not 0.
This allows boguspriv to be turned off from the GUI.
Signed-off-by: Warren Linton <warren@linton.id.au>
[Jo-Philipp Wich: squashed commits, updated commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use the new hostapd functionality (in LEDE) to detect 802.11r and 802.11w
more properly. Leave the old logic in place for Openwrt.
Adjust 802.11w default value from "0" to "" in order to avoid unnecessary
"option ieee80211w 0" lines in /etc/config/wireless
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Openwrt theme apparently accepsts slightly different html than
Bootstrap or Material. Cahnge code to <br /> to make it compatible.
This fixes#1011
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The default hostapd/wpad mini version does not support ieee80211w
and the option's visibility in LuCI may lead it to be placed in user's
/etc/config/wireless preventing wifi from starting.
Check for hostapd/wpad full before exposing the option.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Add support for IEEE802.11w Management Frame Protection options.
Mention in the help text that the full version of wpad/hostapd is
needed.
Currently supported by ath9k and ath10k, and in LEDE also by
mwlwifi and mt76.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Add WPA/WPA2-PSK mixed mode to the list of allowed modes
* Add datatype validation to some fields
* Add help texts
* Reformat longest lines
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adds support for 802.11r fast transition to luci.
Corrects the deletion on nasid in issue #844
The R0KH & R1KH options are not perfect as it would be better
to separate out each option and do some sanity checking on
the values, but that is beyond my capabilities.
Signed-off-by: Warren Linton warren@linton.id.au
(squashed from three original commits in #994. commit message reworded)
The same wifi option 'nasid' is used for two purposes,
RADIUS NAS ID and 802.11r NAS ID / R0KH-ID.
In LuCI the 'nasid' option has depended on WPA-EAP/WPA2-EAP, which
can lead to accidental deletion of the option, if the user modifies
any wifi settings while he has WPA(2)-PSK & 802.11r mode.
802.11r can also be with WPA(2)-PSK, so add them to the dependency
list of allowed encryptions.
(Note: after this fix the 'nasid' field is shown unnecessarily
to "normal" WPA(2)-PSK users. It might later be set to depend on
802.11r being used, after 802.11r has been added to LuCI.)
Reference to bugs:
https://github.com/openwrt/luci/issues/844https://dev.openwrt.org/ticket/20764https://bugs.lede-project.org/index.php?do=details&task_id=274
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
