This commit adds option to disable scan for 40mhz channel, permit to tweak
beacon interval and other advanced settings.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[fix whitespace, add range constraint to dtim_period, add dtim_period
to local vars, reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
In some cases the hidden internal device field was not reset, e.g. after
aborting a wifi scan and using the browser back buttons to navigate to the
overview page again.
In such a case, the previous device hidden field was still present and a new
one getting created, causing further wireless scan attempts to get invoked
with multiple radio names as parameter which fails.
Fix this issue by using the new generic cbi_submit() helper any by dropping
the faulty wifi_action() function.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Convert interface enable, disable and delete actions to proper cbi
operations so that we can benefit from the apply/rollback workflow
when performing critical interface operations.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Also switch the weekday and monthday lists in the firewall rule details to
cbi dropdowns, vastly uncluttering the form.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Do override the iface section id upon commit to avoid clobbering the resulting
configuration. The manual config sync is not needed anymore after switching
to uncached ubus uci operations.
Fixes#1770.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- localize variables
- get rid of redirects breaking apply workflow
- auto-adjust unusable channels when switching country
- use apply/rollback workflow when enabling/disabling networks
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When reading the configured mac address of the static lease, filter it
through luci.ip.checkmac() to canonicalize and uppercase the value for
mapping it against the combo box host hints.
Fixes#1772.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The value of cachesize is hardcoded to 10000 in
dnsmasq-2.79/src/option.c to 10000 max
case 'c': /* --cache-size */
{
int size;
if (!atoi_check(arg, &size))
ret_err(gen_err);
else
{
/* zero is OK, and means no caching. */
if (size < 0)
size = 0;
else if (size > 10000)
size = 10000;
daemon->cachesize = size;
}
break;
}
Tested on Netgear R7800
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
In the case of more powerful routers the default
cachesize value == 150 is too small and can easily
be extended to 1,000's and 10,000's of entries.
It makes sense to make it easy configurable.
Tested on Netgear R7800
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Fix whitespace, edit the proposed help text.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Use the new luci.ip MAC address facilities to parse and verify MAC addresses
in a common way, instead of relying on various ad-hoc solutions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Keep the ifname and bridge state backup variables in /etc/config/luci to not
pollute /etc/config/network.
Fixes#1655.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
If no DSL SNR offset is set for the dsl line the first entry from the
dropdown list is pre-selected by default, which would apply a -10 db
offset by default.
Pre-select the 0 db option if nothing else is specified in the uci config
files.
Signed-off-by: Mathias Kresin <dev@kresin.me>
The length of DUID-LL is 80 bits (16 bit DUID type, 16 bit hardware type, 48 bit mac)
which corresponds to 20 nibbles. Also lower the minimum required length of DUID to
20 nibbles in order to allow entering a DUID-LL.
Signed-off-by: Arjen de Korte <build+github@de-korte.org>
this was added to LEDE with ed62d91f4b5296a4aa883ce975d76f590ef4e910 and defaults to enable.
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
* make it only visible for 802.11s mesh-networks
* have it enabled by default
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
[add empty line before meshfwd assignment]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Allow user to chose if use FT over DS protocol or
FT over the Air protocol for Fast BSS Transition
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Add local generation of PMK when using a PSK.
So 802.11r is easier to configure and no inter AP
communication is needed any more.
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Currently there are only 2 encryption options visible for adhoc
mode. But in netifd, others are also supported and working as
expected. So adding WPA-PSK, WPA2-PSK and WPA-PSK/WPA2-PSK Mixed
mode as encryption options.
Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com>
Most users likely want the hostname of a static DHCP lease to be resolveable,
even if the corresponding host is currently offline.
Adjust the form logic to automatically set 'option dns 1' whenever a name is
specified in the static lease entry.
FIxes LEDE FS#815.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This change extends the switch VLAN configuration page to automatically
adjust interface ifname options when altering VLAN settings.
For example "eth0" is changed to "eth0.1" when a previously untagged LAN
VLAN is switched to tagged on the CPU port and vice versa.
Notifications are displayed in the page header if an auto migration was
performed.
This change should make the switch configuration more user friendly and
less prone to soft bricking.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
