This is required to resolve conflicts with the existing "device" option
in other proto handlers such as PPP or QMI where "device" refers to the
device path of the tty control device instead of a netdev name.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 10f02472c5)
If different options point to the same underlying uci option, we must only
remove the uci value if none of the other alias options is active in order
to prevent inactive options (due to unsatisfied depends) removing the uci
value of active once on save.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f3f74bd0fe)
The still referenced help.gif icon is absent by default since it has been
moved to luci-compat.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 6960819997)
This commit effectively reverts the change made with
907b4222f7 ("luci-mod-network: don't hide "Device" on protocol change").
Floating tunnel protocols such as 6in4, plain PPP over modem device,
VPNC etc. do not have any layer 2 device at all, for such protocols the
device selector should be hidden.
Also swap back the incorrect option order introduced with commit
b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges").
Since device depends on proto, it should come after the protocol selection,
not before.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit fc12933670)
Commit b7f3cf66ca "luci-mod-network: drop support for *adding* legacy bridges"
dropped the protocol dependcies of the ifname/device selector in the add new
interface dialog.
Re-add the required dependencies and swap the order of the protocol and
device inputs while we're at it since latter depends on the former.
Fixes: b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 147188f6ee)
Existing javascript did not read a non-default statistics hostname due to
incorrect config ids.
Signed-off-by: Anderson McKinley <coyoso@tuta.io>
(cherry picked from commit 97424d57af)
Using the scalable graphic in place of the static png file saves some
ressources in flash and network. It also aligns the filetype to the type
announced to the browser.
fixes GitHub-issue #5051
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
(cherry picked from commit 184e93df5f)
This calls striptags() on the hostname to prevent any XSS over the
hostname. This should fix CVE-2021-33425 as far as I understood it.
If someone adds some Javascript into system.@system[0].hostname it would
have been directly added to the page, this prevents the problem.
This can only be exploited by someone being able to modify the uci
configuration, normally a user with such privileges could also just
modify the webpage.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5cbd79d7e3)
When including luci.mk in external repos it's sometimes usefull to not use
the default LuCI-submenu hierarchy.
This change defines the LUCI_SUBMENU_FORCED variable which completely overrides
the default submenu of the LuCI config-section. When LUCI_SUBMENU_FORCED is not
defined, the default submenu derrived from LUCI_TYPE or "Application" fallback
is used.
Defining LUCI_SUBMENU_FORCED in the package Makefile will just use this value.
Setting it to "none" will not define a submenu at all.
Together with LUCI_SECTION and LUCI_CATEGORY menu items can now created at any
place in the menu structure.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit 2b11ec6fd0)
Add PKG_PROVIDES macro to be passed down to buildpackage defines as PROVIDES variable.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit 209141d491)
Add the LUCI_URL and LUCI_MAINTAINER variables to pass them to the buildpackage
defines. Give them some sane defaults and allow overwritting by the individual
package.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit ae0795deb0)
Since `uci.get()` may return null or array values, we cannot blindly call
split() on the result. Use the safe `L.toArray()` helper which is intended
to deal with such situations.
Also clean up whitespace while we're at.
Fixes: #5080
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c4cdfcbe51)
Problem with handling all migrations in 1 step is that uci.sections()
doesn't include changes queued using uci.callAdd() and uci.callSet().
That could result in unexpected behaviour and generating invalid
configs.
For the sake of simplicity and reliability use 2 steps migration. The
downside is that users may get prompted twice to migrate.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Fixes: 74be304e54 ("treewide: use "device" option in UCI "interface" sections")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit e7c9c63c65)
Those are L2 options that are not part of interfaces (L3), should not be
set there and don't work. Setting MAC and MTU should be done at device
layer (config device) and is supported for basic types already.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 79947af064)
The introduction of network device configuration support also implemented
all common, protocol-independent interface options directly in the
interface config view, so drop the redundant option definitions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 171ef77e89)
netifd has been recently patched to use "device" option instead of
"ifname" as more clear & accurate.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 74be304e54)
Checking netifd version is important for users of the most recent LuCI
that didn't update netifd (e.g. OpenWrt package).
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 17af33ee48)
LuCI supports only the newer method of specifying bridge ports using the
"ports" option. Offer users migration so they can configure their
network.
Example:
1. Before
config device
option name 'br-lan'
option type 'bridge'
list ifname 'lan1'
list ifname 'lan2'
list ifname 'lan3'
list ifname 'lan4'
2. After
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b8acde7f48)
Device ("ifname" UCI option) doesn't depend on protocol so there is no
need to hide / reset it on protocol change.
While at it drop names of two removed inputs (dead code).
Fixes: ec020cee0c ("luci-mod-network: drop support for *editing* legacy bridges")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 907b4222f7)
LuCI now supports the updated UCI syntax for bridges that requires:
1. device section for L2
2. interface section for L3
Check for legacy syntax usage and offser user a migration to allow
changing network config.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit bca76a7673)
netifd has been recently patched to use more accurate "ports" option
instead of "ifname"
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a90115cd82)
The old way of defining bridge (L2) as part of interface (L3) is
deprecated. All such configs should be migrated to define bridge as L3
UCI section type "device".
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit ec020cee0c)
The old way of defining bridge (L2) as part of interface (L3) is
deprecated. Don't support *adding* interfaces like that.
Support for *editing* legacy bridges is kept for now for compatibility
with existing legacy setups.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b7f3cf66ca)
Ensure that device sections are only automatically removed after all
related options have been parsed, to avoid prematurely deleting sections.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 2072c66c5a)
Introduce a `migrate` properties which selectively allows disabling the
`config interface` to `config device` migration logic for single options.
Use the new flag to disable migration of the "ipv6" option which has
different semantics in interface and device sections.
Ref: https://forum.openwrt.org/t/pppoe-disable-ipv6/92548
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 935e9a3c34)
Only disable legacy bridging if an existing network.device section with type
bridge is found, ignore non-type sections since those do not declare a
bridge but set attributes on top of an existing one.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f48f9f11e7)
The existing logic only handled removing the last remaining device section
option (which results in the deletion of the entire section) but failed to
actually unset single options.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit b9fad85f2e)
When setting bridge and device specific options such 'stp' or
'igmp_snooping', LuCI so far transparently created or reused a
`config device` section and set the corresponding option there.
In the case of bridges, this triggers multiple problems:
- When implicitely creating a `config device` section referring to the
bridge device, the legacy bridge configuration of the corresponding
interface is disabled, causing a broken configuration on subsequent
save operations
- Netifd does not appear to properly merge bridge settings from config
device and config interface sections, leading to an incoherent
configuration state
In order to avoid that issue, do not automatically migrate bridge specific
options.
Fixes: #4948
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit a9a223b973)
The previous change didn't take dynamic dependency mangling into account.
Fixes: 2bfd4908a9 ("luci-mod-network: restore DNS option semantics for proto static")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 9a92f9c761)
