Instead of relying on the connect-before-setuid hack, ship a proper
acl definition file whitelisting the procedures that LuCI requires
on its non-root pages.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Some applications only support ipv4 so add ipv4only option
to host and hostport datatypes so that for thos applications
that when an IP address is specified only and ipv4 ip address
gets accepted.
The previous versiono of ipaddrport validator only worked for ipv4
due to disallowing colons (:) in ip address which obvious fails for
ipv6. We now instead allow either ipv4 address or an ipv6 address of
the form [<ipv6address>]:port
Some files and pointers to files are not safe to remove without a replacement
file and config pointing to the file. For instance for uhttpd application in
the works, removing the certificate or key config or files without having the
replacements in places renders the WeUI inaccessible.
The only other place where FileUpload is currently used is for wifi certificates
for which the 'safe' handling is also preferred. Therefore make the default for
the FileUpload widget the safe handling and add a property self.unsafeupload that
allows for the old unsafe handling should it prove useful in some case.
Also allow to specify a file already on router instead of uploading a file.
Signed-off By: Daniel Dickinson <openwrt@daniel.thecshore.com>
The call to http.formvalue in order to read the csrf token causes
_parse_input to be triggered *before* controllers and cbi maps have
been built. This results in the failure of file uploads because
the file handler is not yet in place when _parse_input gets called,
and it is in _parse_input that POST data is parsed (including files).
To fix this we add the ability to write file fields to temporary
files (using mkstemp and unlink in nixio.file) and use this to
store file data until the filehandler is registered, with a
fallback to reading the file data into memory.
Once the filehandler callback gets registered we iterate
though all previously parsed (saved) files and copy the
data to the file handler, and then close the temporary
file (which finally removes because we unlinked after
creating the file, but didn't close the file so unlink
was deferred).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Some applications only support ipv4 so add ipv4only option
to host and hostport datatypes so that for thos applications
that when an IP address is specified only and ipv4 ip address
gets accepted.
The previous versiono of ipaddrport validator only worked for ipv4
due to disallowing colons (:) in ip address which obvious fails for
ipv6. We now instead allow either ipv4 address or an ipv6 address of
the form [<ipv6address>]:port
Some files and pointers to files are not safe to remove without a replacement
file and config pointing to the file. For instance for uhttpd application in
the works, removing the certificate or key config or files without having the
replacements in places renders the WeUI inaccessible.
The only other place where FileUpload is currently used is for wifi certificates
for which the 'safe' handling is also preferred. Therefore make the default for
the FileUpload widget the safe handling and add a property self.unsafeupload that
allows for the old unsafe handling should it prove useful in some case.
Also allow to specify a file already on router instead of uploading a file.
Signed-off By: Daniel Dickinson <openwrt@daniel.thecshore.com>
/lib/uci/upload is a rather odd place for configuration files
Also the files were not saved across sysupgrade, which is somewhat
counter-productive for configuration files.
Signed-off By: Daniel Dickinson <openwrt@daniel.thecshore.com>
The new function is twice as fast as the old implementation and properly
summarizes outgoing and incoming byte and packet counters.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Add two new types 'hostport' and 'ipaddrport' to validate strings in the form
'sub.example.org:1234' and '0.0.0.0:80'. The 'hostport' accepts hostnames or
IP addresses followed by a colon and a port number while the 'ipaddrport' type
accepts numeric IP addresses only, followed by a colon and a port.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
When using os.execute or luci.sys.call the shell is called with the
command line which means that standard shell interpretation of strings
occurs. To allow to use these commands more easily we add functions
for properly escaping single-quoted strings used on the command line
* Prevents an empty Location header
* Useful in environments where build_url() could return an empty string (such as http server rewrites requests to /cgi-bin/luci)
Signed-off-by: Joel Pedraza <github@saik0.net>
Two new arguments url, defpath were added to cbi_dynlist_init() for
initializing the brower button.
An example of usage
identity = section:taboption("general", DynamicList, "identity",
translate("List of SSH key files for auth"))
identity.datatype = "file"
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
As per http://tools.ietf.org/html/rfc3986#section-2.3
Characters that are allowed in a URI but do not have a reserved
purpose are called unreserved. These include uppercase and lowercase
letters, decimal digits, hyphen, period, underscore, and tilde.
unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
cbi.lua
- Implement Flag.validate function to be overwritable
- rewritten if clause for easier reading ;-)
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Rewrite `luci.sys.wifi.getiwinfo()` to use the ubus wireless state instead of
depreacated uci state vars in order to map abstract network notation to
wireless ifnames.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Now that we don't have an url token anymore, '/cgi-bin/luci' becomes a valid
url while cookies are restricted to only '/cgi-bin/luci/' and below.
In order to ensure that the first request after login refers to a path
covered by the authentication cookie, change build_url() to always append
a trailing slash if we're referring to the base url.
This should fix the login problems mentioned in #516.
While we're touching the dispatcher, also remove remaining url token code.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Now that sensitive urls require post requests and only accept them if a valid
security token is sent along the request, we can drop the global random url
token to improve LuCI usability.
The main improvement is the ability to use multiple tabs with the same login
session, but also deep linking to specific urls without the need for another
login becomes feasible, e.g. for documentation purposes.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
* Add a generic helper function to check need for post / csrf token validation
* Remove custom token verification in cbi targets
* Support requiring post security depending on specific submit parameters,
usable through post_on() action
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Sync translations to the current strings.
Changes in luci-app-ddns, luci-app-mjpg-streamer, luci-app-qos,
luci-app-shadowsocks-libev, luci-app-statistics and luci-base
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Changes in 2015g:
http://mm.icann.org/pipermail/tz-announce/2015-October/000034.html
Norfolk moves from +1130 to +1100 on 2015-10-04 at 02:00 local time.
Fiji's 2016 fall-back transition is scheduled for January 17, not 24.
Fort Nelson, British Columbia will not fall back on 2015-11-01. It has
effectively been on MST (-0700) since it advanced its clocks on 2015-03-08.
New zone America/Fort_Nelson.
Note: the Turkey-related one-time rule change is not apparently catched by
the zoneinfo2lua script, so that change is not included in this commit.
(Turkey's 2015 fall-back transition is scheduled for Nov. 8, not Oct. 25.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
