Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
The underlying operating system for DifuseHQ's embedded routing devices
64654 commits 4 branches 19 tags 833 MiB
C 64%
Makefile 18.8%
Shell 6.6%
Roff 4.9%
Perl 2.6%
Other 3%
Find a file
INAGAKI Hiroshi 35c851b813 mvebu: add support for Check Point V-80 
Check Point V-80 (Quantum Spark 1550 Appliance) is an Appliance, based
on Armada 7040 (88F7040).

Specification:

- SoC             : Marvell Armada 7040 (88F7040)
- RAM             : DDR4 2 GiB (4x Nanya NT5AD512M8D3-HR)
- Flash           : eMMC 4 GiB (Toshiba THGBMNG5D1LBAIL)
- Ethernet        : 6x 10/100/1000 Mbps
  - LAN 1-5       : Marvell 88E6352
  - WAN           : Marvell 88E1512
- LEDs/Keys (GPIO): 6x/1x
- UART            : "CONSOLE" port (USB 1.1 Type-C)
  - chip          : Silicon Labs CP2102N
  - port          : ttyS0
  - settings      : 115200bps 8n1
- HW Monitoring   : 2x nuvoTon NCT7802Y
- USB             : USB 3.0 Type-A
- Power           : 12 VDC, 3.3 A
  - plug          : DC Plug 2.5/5.5 mm (inner/outer)

Flash instruction (common):

1. Boot V-80 normally
2. Login to the vendor CLI (default: admin/admin) and login to the Linux
   CLI by `expert` command
3. Update U-Boot environment variables by the following commands

   fw_setenv bootcmd_ow_usb 'usb start; load usb 0:1 ${loadaddr} boot.scr && source ${loadaddr}'
   fw_setenv bootcmd_ow_emmc 'run set_mmc_internal; mmc read ${loadaddr} ${prim_header_mmc_blk} 4 && source ${loadaddr}'
   fw_setenv bootcmd 'run bootcmd_ow_usb; run bootcmd_ow_emmc; run bootcmd_part${activePartition};'

   Attention: don't forget single quatations of values to prevent
              expansion of each variables

4. Turn off the device

Flash instruction (USB-boot):

1. Burn (squashfs|ext4)-sdcard.img.gz to USB storage
2. Connect that storage to the USB 3.0 port on V-80
3. Turn on V-80 and it will be booted with OpenWrt in that USB storage

Flash instruction (eMMC-boot):

1. Copy initramfs image, dtb and bootsctipt to the USB storage with
   renaming

   initramfs.bin -------> Image
   dtb -----------------> armada-7040-v-80.dtb
   bootscript (.scr) ---> boot.scr

2. Connect that storage to the USB 3.0 port on V-80
3. Turn on V-80 and it will be booted with OpenWrt initramfs image in
   that USB storage
4. Upload (squashfs|ext4)-sysupgrade.gz to V-80
5. Perform sysupgrade with the uploaded image
6. Wait ~100 seconds to complete flashing

Reverting to stock firmware:

1. Turn on V-80 and interrupt booting by Ctrl + C
2. Select "4. Restore to Factory Defaults (local)"
3. Wait ~180 seconds to complete restoring and rebooting

Notes:

- V-80 has some HW versions. Internal MicroSD card slot and mPCIe slot
  is available on some HW versions, but not on the other HW versions.

  confirmed (MicroSD/mPCIe slots):

  - 1.0.1: unavailable
  - 1.0.3: available

- The partition table in the internal eMMC has single partition, but
  "blkdevparts=" parameter will be passed from the bootloader and that
  definition will be used instead.

MAC addresses:

LAN: 00:1C:7F:xx:xx:4B (mmcblk1boot0, ethaddr (text))
WAN: 00:1C:7F:xx:xx:4A (mmcblk1boot0, eth1addr (text))

Tested-by: Yanase Yuki <dev@zpc.st>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16904
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-06-22 22:17:20 +02:00
.devcontainer/ci-env devcontainer: Add development environment for gihub codespace 2023-10-30 23:34:26 +01:00
.github archs38: drop target 2025-06-05 10:43:00 +02:00
.vscode meta: VS Code: add "Git: Always Sign Off" setting 2024-10-03 17:18:51 +02:00
config build: image: support specifying mksquashfs4 parallel threads 2025-06-05 21:28:03 +02:00
include build: add dtb support for sysupgrade-tar 2025-06-22 22:17:20 +02:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package uboot-envtools: add support for Check Point V-80 2025-06-22 22:17:20 +02:00
scripts build: add dtb support for sysupgrade-tar 2025-06-22 22:17:20 +02:00
target mvebu: add support for Check Point V-80 2025-06-22 22:17:20 +02:00
toolchain toolchain: binutils: add support for 2.44 2025-06-08 19:29:37 +02:00
tools tools/bash: update to version 5.2.37 2025-06-19 22:16:32 +02:00
.gitattributes .gitattributes: ignore some whitespace "violations" in .patch files 2024-12-12 11:01:56 +01:00
.gitignore gitignore: ignore local APK keys 2024-05-17 22:03:06 +03:00
BSDmakefile build: use SPDX license tags 2021-02-05 14:54:47 +01:00
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds.conf.default: enable video feed by default 2024-12-05 01:34:01 +00:00
Makefile build: include tests/Makefile if available 2024-06-17 17:51:31 +02:00
README.md README: replace "MacOSX" with "macOS" 2024-04-01 18:46:30 +02:00
rules.mk rules.mk: respect the empty CONFIG_HOST_FLAGS_OPT 2025-05-16 20:42:43 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0