Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
The underlying operating system for DifuseHQ's embedded routing devices
64529 commits 4 branches 19 tags 833 MiB
C 64%
Makefile 18.8%
Shell 6.6%
Roff 4.9%
Perl 2.6%
Other 3%
Find a file
INAGAKI Hiroshi 0cbdab5038 qualcommax: add support for I-O DATA WN-DAX3000GR 
I-O DATA WN-DAX3000GR is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based
on IPQ5018.

Specification:

- SoC             : Qualcomm IPQ5018
- RAM             : DDR3 512 MiB
- Flash           : SPI-NAND 128 MiB (Macronix MX35UF1G24AD-Z4I)
- WLAN            : 2.4/5 GHz 2T2R
  - 2.4 GHz       : Qualcomm IPQ5018 (SoC)
  - 5 GHz         : Qualcomm Atheros QCN6102
- Ethernet        : 5x 10/100/1000 Mbps
  - wan (phy)     : Qualcomm IPQ5018 (SoC)
  - lan (switch)  : Qualcomm Atheros QCA8337
- LEDs/Keys (GPIO): 7x/5x
- UART            : through-hole on PCB (J3)
  - assignment    : 3.3V, TX, RX, NC, GND from tri-angle marking
  - settings      : 115200n8
- USB             : USB 2.0 Type-A (through-hole on PCB, "J6")
- Power           : 12 VDC, 1A (Typ. 930 mA)

Flash instruction using factory.bin image:

1. Boot WN-DAX3000GR with router mode
2. Access to the WebUI ("http://192.168.0.1/") on the device and open
   the firmware update page ("ファームウェア")
3. Select the OpenWrt factory.bin image and click update ("更新") button
4. Wait ~120 seconds to complete flashing

Switching to the stock firmware:

1. Load the elecom.sh script

   . /lib/upgrade/elecom.sh

2. Check the current index of rootfs

   bootconfig_rw_index 0:bootconfig rootfs

3. Set the index to inverted value

   bootconfig_rw_index 0:bootconfig rootfs <value>
   bootconfig_rw_index 0:bootconfig1 rootfs <value>

   example:

   - step2 returned "0":

     bootconfig_rw_index 0:bootconfig rootfs 1
     bootconfig_rw_index 0:bootconfig1 rootfs 1

   - step2 returned "1":

     bootconfig_rw_index 0:bootconfig rootfs 0
     bootconfig_rw_index 0:bootconfig1 rootfs 0

4. Reboot

Partition Layout (Stock FW, bootconfig(rootfs)=1):

0x000000000000-0x000000080000 : "0:SBL1"
0x000000080000-0x000000100000 : "0:MIBIB"
0x000000100000-0x000000140000 : "0:BOOTCONFIG"
0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
0x000000180000-0x000000280000 : "0:QSEE"
0x000000280000-0x000000380000 : "0:QSEE_1"
0x000000380000-0x0000003c0000 : "0:DEVCFG"
0x0000003c0000-0x000000400000 : "0:DEVCFG_1"
0x000000400000-0x000000440000 : "0:CDT"
0x000000440000-0x000000480000 : "0:CDT_1"
0x000000480000-0x000000500000 : "0:APPSBLENV"
0x000000500000-0x000000640000 : "0:APPSBL"
0x000000640000-0x000000780000 : "0:APPSBL_1"
0x000000780000-0x000000880000 : "0:ART"
0x000000880000-0x000000900000 : "0:TRAINING"
0x000000900000-0x000003c40000 : "rootfs_1"
0x000003c40000-0x000003fc0000 : "Config"
0x000003fc0000-0x000007300000 : "rootfs"
0x000007300000-0x000007680000 : "Config_2"
0x000007680000-0x000007700000 : "idmkey"
0x000007700000-0x000007c00000 : "Reserved"
0x000007c00000-0x000007c80000 : "FWHEADER"
0x000007c80000-0x000007d00000 : "Factory"

Known Issues:

- This device has a Macronix MX35UF1G24AD SPI-NAND chip registered as
  oobsize=128 in Linux Kernel. But using BCH8 breaks I/O on the chip
  with the following errors, so this support uses BCH4 instead.

  [    1.542261] 0x000000480000-0x000000500000 : "0:appsblenv"
  [    1.547959] 1 fixed-partitions partitions found on MTD device 0:appsblenv
  [    1.551265] Creating 1 MTD partitions on "0:appsblenv":
  [    1.558096] 0x000000000000-0x000000040000 : "env-data"
  [    1.627282] u-boot-env-layout 79b0000.qpic-nand:flash@0:partitions:partition-0-appsblenv:partition@0:nvmem-layout: probe with driver u-boot-env-layout failed with error -74

  root@OpenWrt:~# strings /dev/mtdblock10
  [   77.806720] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
  [   77.807554] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
  [   77.815977] I/O error, dev mtdblock10, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
  [   77.824721] I/O error, dev mtdblock10, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
  [   77.834095] I/O error, dev mtdblock10, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
  [   77.843278] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
  [   77.851577] Buffer I/O error on dev mtdblock10, logical block 0, async page read

Notes:

- This device has dual-boot feature and it's managed by the index in the
  0:bootconfig and 0:bootconfig1 partitions.

- There are through-holes on PCB for USB 2.0, but it cannot be accessed
  without disassembly of the housing. So it's not enabled in this
  support.

- WN-DAX3000GR has the "bt_fw" volume in the firmware UBI in addition to
  the volumes that will be removed in the section of ELECOM WRC-X3000GS2
  in /lib/upgrade/platform.sh.
  That volume is unnecessary for OpenWrt and add
  `remove_oem_ubi_volume bt_fw` to remove that volume when sysupgrade.
  (that function doesn't anything without errors if no specified volume)

MAC Addresses:

LAN    : 50:41:B9:xx:xx:64 (0:APPSBLENV, "ethaddr"/"eth1addr" (text))
WAN    : 50:41:B9:xx:xx:66 (0:APPSBLENV, "eth0addr" (text))
2.4 GHz: 50:41:B9:xx:xx:64 (0:APPSBLENV, "wifi0"    (text))
5 GHz  : 50:41:B9:xx:xx:65 (0:APPSBLENV, "wifi1"    (text))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19053
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-06-12 10:54:34 +02:00
.devcontainer/ci-env devcontainer: Add development environment for gihub codespace 2023-10-30 23:34:26 +01:00
.github archs38: drop target 2025-06-05 10:43:00 +02:00
.vscode meta: VS Code: add "Git: Always Sign Off" setting 2024-10-03 17:18:51 +02:00
config build: image: support specifying mksquashfs4 parallel threads 2025-06-05 21:28:03 +02:00
include uboot-mk: Enable specifying defconfig fragments 2025-06-07 21:10:28 +02:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package qualcommax: add support for I-O DATA WN-DAX3000GR 2025-06-12 10:54:34 +02:00
scripts package: rework contents of package index.json 2025-06-11 16:55:31 +02:00
target qualcommax: add support for I-O DATA WN-DAX3000GR 2025-06-12 10:54:34 +02:00
toolchain toolchain: binutils: add support for 2.44 2025-06-08 19:29:37 +02:00
tools tools/squashfs4: update to 4.7.0 2025-06-05 21:28:03 +02:00
.gitattributes .gitattributes: ignore some whitespace "violations" in .patch files 2024-12-12 11:01:56 +01:00
.gitignore gitignore: ignore local APK keys 2024-05-17 22:03:06 +03:00
BSDmakefile build: use SPDX license tags 2021-02-05 14:54:47 +01:00
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds.conf.default: enable video feed by default 2024-12-05 01:34:01 +00:00
Makefile build: include tests/Makefile if available 2024-06-17 17:51:31 +02:00
README.md README: replace "MacOSX" with "macOS" 2024-04-01 18:46:30 +02:00
rules.mk rules.mk: respect the empty CONFIG_HOST_FLAGS_OPT 2025-05-16 20:42:43 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0