5703ca465c
Until now only the RTL930x devices make use of the following notation.
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <8>;
sds = <3>;
};
This indicates that the link is driven by a serdes directly without
external phy. As the devices have multiple serdes it must be clarified
what serdes is responsible for that port.
Nevertheless all other devices have the same requirements. E.g. RTL838x
usually drives port 24 from serdes 4 and port 26 from serdes 5. All this
currently works because the driver has a lot of hardcoded port/serdes
mapping.
Make the situation better by adding dts helpers that can describe the
topology as needed.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18851
Signed-off-by: Robert Marko <robimarko@gmail.com>
396 lines
7.7 KiB
Text
396 lines
7.7 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include <dt-bindings/clock/rtl83xx-clk.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/dts-v1/;
|
|
|
|
#define STRINGIZE(s) #s
|
|
#define LAN_LABEL(p, s) STRINGIZE(p ## s)
|
|
#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
|
|
|
|
#define INTERNAL_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
reg = <##n>; \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
phy-is-integrated; \
|
|
};
|
|
|
|
#define INTERNAL_PHY_SDS(n, s) \
|
|
phy##n: ethernet-phy@##n { \
|
|
reg = <##n>; \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
phy-is-integrated; \
|
|
sds = <##s>; \
|
|
};
|
|
|
|
#define EXTERNAL_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
reg = <##n>; \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
};
|
|
|
|
#define EXTERNAL_SFP_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
sfp; \
|
|
media = "fibre"; \
|
|
reg = <##n>; \
|
|
};
|
|
|
|
#define EXTERNAL_SFP_PHY_FULL(n, s) \
|
|
phy##n: ethernet-phy@##n { \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
sfp = <&sfp##s>; \
|
|
reg = <##n>; \
|
|
};
|
|
|
|
#define SWITCH_PORT(n, s, m) \
|
|
port##n: port@##n { \
|
|
reg = <##n>; \
|
|
label = SWITCH_PORT_LABEL(s) ; \
|
|
phy-handle = <&phy##n>; \
|
|
phy-mode = #m ; \
|
|
};
|
|
|
|
#define SWITCH_SFP_PORT(n, s, m) \
|
|
port##n: port@##n { \
|
|
reg = <##n>; \
|
|
label = SWITCH_PORT_LABEL(s) ; \
|
|
phy-handle = <&phy##n>; \
|
|
phy-mode = #m ; \
|
|
fixed-link { \
|
|
speed = <1000>; \
|
|
full-duplex; \
|
|
}; \
|
|
};
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "realtek,rtl838x-soc";
|
|
|
|
osc: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
ccu: clock-controller {
|
|
compatible = "realtek,rtl8380-clock";
|
|
#clock-cells = <1>;
|
|
clocks = <&osc>;
|
|
clock-names = "ref_clk";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "mips,mips4KEc";
|
|
reg = <0>;
|
|
clocks = <&ccu CLK_CPU>;
|
|
operating-points-v2 = <&cpu_opp_table>;
|
|
};
|
|
};
|
|
|
|
cpu_opp_table: opp-table-0 {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
|
|
opp00 {
|
|
opp-hz = /bits/ 64 <325000000>;
|
|
};
|
|
opp01 {
|
|
opp-hz = /bits/ 64 <350000000>;
|
|
};
|
|
opp02 {
|
|
opp-hz = /bits/ 64 <375000000>;
|
|
};
|
|
opp03 {
|
|
opp-hz = /bits/ 64 <400000000>;
|
|
};
|
|
opp04 {
|
|
opp-hz = /bits/ 64 <425000000>;
|
|
};
|
|
opp05 {
|
|
opp-hz = /bits/ 64 <450000000>;
|
|
};
|
|
opp06 {
|
|
opp-hz = /bits/ 64 <475000000>;
|
|
};
|
|
opp07 {
|
|
opp-hz = /bits/ 64 <500000000>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
mdio-gpio1 = &mdio_gpio;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
cpuintc: cpuintc {
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
/*
|
|
* Provided for devices with RTL838xM SoC with revision A silicon.
|
|
* Newer SoCs can use the &mdio_aux bus instead.
|
|
*/
|
|
mdio_gpio: mdio {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>,
|
|
<&gpio0 3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_aux_gpio>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
soc: soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x18000000 0x10000>;
|
|
|
|
intc: interrupt-controller@3000 {
|
|
compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
|
|
reg = <0x3000 0x18>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>, <3>, <4>, <5>, <6>;
|
|
};
|
|
|
|
spi0: spi@1200 {
|
|
compatible = "realtek,rtl8380-spi";
|
|
reg = <0x1200 0x100>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
timer0: timer@3100 {
|
|
compatible = "realtek,rtl8380-timer", "realtek,otto-timer";
|
|
reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>,
|
|
<0x3130 0x10>, <0x3140 0x10>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>;
|
|
clocks = <&ccu CLK_LXB>;
|
|
};
|
|
|
|
uart0: uart@2000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x2000 0x100>;
|
|
|
|
clocks = <&ccu CLK_LXB>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <31 1>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
};
|
|
|
|
uart1: uart@2100 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&enable_uart1>;
|
|
|
|
compatible = "ns16550a";
|
|
reg = <0x2100 0x100>;
|
|
|
|
clocks = <&ccu CLK_LXB>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <30 0>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog0: watchdog@3150 {
|
|
compatible = "realtek,rtl8380-wdt";
|
|
reg = <0x3150 0xc>;
|
|
|
|
realtek,reset-mode = "soc";
|
|
|
|
clocks = <&ccu CLK_LXB>;
|
|
timeout-sec = <30>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupt-names = "phase1", "phase2";
|
|
interrupts = <19 3>, <18 4>;
|
|
};
|
|
|
|
gpio0: gpio-controller@3500 {
|
|
compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
|
|
reg = <0x3500 0x20>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
ngpios = <24>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <23 3>;
|
|
};
|
|
};
|
|
|
|
switchcore@1b000000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x1b000000 0x10000>;
|
|
|
|
mdio_aux: mdio-aux {
|
|
compatible = "realtek,rtl8380-aux-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_aux_mdx>, <&aux_mode_mdio>;
|
|
};
|
|
|
|
soc_thermal: thermal {
|
|
compatible = "realtek,rtl8380-thermal";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
};
|
|
|
|
pinmux@1b000144 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x1b000144 0x4>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
/* I2C mode */
|
|
aux_mode_i2c: i2c-pins {
|
|
pinctrl-single,bits = <0x0 0x0 0x1>;
|
|
};
|
|
|
|
/* MDIO mode */
|
|
aux_mode_mdio: mdx-pins {
|
|
pinctrl-single,bits = <0x0 0x1 0x1>;
|
|
};
|
|
};
|
|
|
|
pinmux: pinmux@1b001000 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x1b001000 0x4>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
enable_uart1: pinmux_enable_uart1 {
|
|
pinctrl-single,bits = <0x0 0x10 0x10>;
|
|
};
|
|
};
|
|
|
|
/* LED_GLB_CTRL */
|
|
pinmux_led: pinmux@1b00a000 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x1b00a000 0x4>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
/* enable GPIO 0 */
|
|
pinmux_disable_sys_led: disable_sys_led {
|
|
pinctrl-single,bits = <0x0 0x0 0x8000>;
|
|
};
|
|
};
|
|
|
|
pinmux@1b00a0e0 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x1b00a0e0 0x4>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
/* Use SoC GPIO 2/3 as GPIO */
|
|
mdio_aux_gpio: gpio-pins {
|
|
pinctrl-single,bits = <0x0 0x0 0x1>;
|
|
};
|
|
|
|
/* Use SoC GPIO 2/3 as MDC/MDIO */
|
|
mdio_aux_mdx: mdx-pins {
|
|
pinctrl-single,bits = <0x0 0x1 0x1>;
|
|
};
|
|
};
|
|
|
|
ethernet0: ethernet@1b00a300 {
|
|
compatible = "realtek,rtl838x-eth";
|
|
reg = <0x1b00a300 0x100>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <24 3>;
|
|
#interrupt-cells = <1>;
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
sram0: sram@9f000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x9f000000 0x10000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x9f000000 0x10000>;
|
|
};
|
|
|
|
switch0: switch@1b000000 {
|
|
compatible = "realtek,rtl83xx-switch";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <20 2>;
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
cpu-thermal {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <1000>;
|
|
coefficients = <1000 0>;
|
|
thermal-sensors = <&soc_thermal>;
|
|
trips {
|
|
cpu-crit {
|
|
temperature = <105000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|