Some modems and SIM cards take a bit longer to initialize after UIM has been
powered off. Waiting too little time can cause the qmi protocol to end up
in a loop repeatedly power-cycling the SIM card.
Avoid that by
a) increasing the time we unconditionally sleep after --uim-power-on
b) increasing the time we allow uqmi to wait for response for --uim-get-sim-state
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18772
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The call to 'ipcalc' is used in 'dnsmasq' init script to create the
configuration. If the 'ipaddr' is in the configured range then 'ipcalc' exited
with an error whereby the START/STOP variables are unavailable.
This behaviour has changed during 'ipcalc' refactoring and now leads to a
problem when starting 'dnsmasq' if the 'ipaddr' is inside this range. To
restore the old behaviour, only a warning is issued as before and the
required variables for the 'dnsmasq' are still set.
Fixes: 854739b32c (base-files: ipcalc.sh: Rewrite in pure shell)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/18641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the uci 'dhcp' configuration for the dhcp leases is incorrect then
the call to 'ipclac' fails. However, the problem is that the dnsmasq
configuration option 'dhcp-range' is still written for this uci section
even though the information generated by ipcalc is incorrect or not set.
Due to the incorrectly generated configuration for dnsmasq, the service
cannot start.
To prevent an incorrect configuration from being written to the configuration,
a check is now made beforehand to ensure that the required variables are
present and valid. If the configuration is incorrect, a message is emitted
to the log that this configuration section is incorrect and this uci
configuration section is omitted.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/18641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ucode-based wifi interface validation is based on `hostapd.conf`
specific options, which means it's missing the OpenWrt-specific
'network' property.
This causes schema validation warnings like:
```
daemon.notice netifd: radio1 (1340): wifi-scripts: network is not present in the schema
```
The description is taken from the OpenWrt wiki:
https://openwrt.org/docs/guide-user/network/wifi/basic#common_options1
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18946
Signed-off-by: Robert Marko <robimarko@gmail.com>
This symbol was lost when porting to the 6.12 kernel.
Fixes: 16b5a77716 ("mediatek: mt7629: update config-6.12")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18947
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
All four subtargets build successfully and run under QEMU.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Drop obsolete symbols GCC_ASM_GOTO_OUTPUT_WORKAROUND and HW_CONSOLE, and
PREEMPT_NONE_BUILD which is now set in top-level generic config.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Support new libpcap dependency and drop an old kernel version dependency.
Also improve formatting and avoid using unneeded deferred make variables.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The initial 6.12 merge leaves package/zram menuconfig behaviour confusing.
Selecting "kmod-zram" opens a submenu of the available algorithms to build
and the actual algo to use. However, when "lzo-rle" is shown as the default
used, it still remains missing from the available list. Only enabling a
_different_ compression algo to build will also reveal "lzo-rle" as
available.
Update the Kconfig to show "lzo-rle" as available if used/referenced.
Fixes: 4708057e27 ("package/zram: update for kernel 6.12")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These packages were dropped off in reverted packaging, bring
them all back.
Link: https://github.com/openwrt/openwrt/pull/18952
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Update subtarget configs for kernel 6.12.
- Refresh patches for kernel 6.12.
- Drop 210-revert-macronix-nand-block-protection.patch since brcmnand no longer
implements low level ops.
- Adapt bcm63268 gpio switches for 6.12 numbering.
- Add b53 pending patches from Jonas Gorski to fix system hangs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This is an automatically generated commit which aids following kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
263a0cb87b50 udebug: use proper libudebug API
ca9b8765aea3 dns: rework packet API
ea40cfdf7eb0 cache: send multiple queries in a single packet
d62813727e53 cache: add explicit lookup for host addresses
0ce73d80dc0c dns: add cache/queue for outgoing queries
083be33749b1 cache: improve service refresh behavior
55d0c1bc1ac5 interface: ask for unicast responses by default
ce508467a533 service: add support for setting service specific hostname
632953a1582d interface: when interface properties change, reinitialise
695ac3708aa0 ubus: fix ubus announcements txt fields
cecbe1c0caae Make mdns responder case-insensitive.
2b28094d31ca dns: add support for reverse address mapping queries
Signed-off-by: Felix Fietkau <nbd@nbd.name>
By OpenWrt's design, hostapd runs in a single global instance for all radios supported by the device, rather than one instance per radio like hostapd usually does.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
Manually refreshed:
301-mesh-noscan.patch
601-ucode_support.patch
770-radius_server.patch
Automatically rebased all other patches.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
The support_eee patch is needed in order to prevent system hangs on bmips
devices.
c4f873c2b65c8 net: dsa: b53: mdio: add support for BCM53101
c86692fc2cb77 net: dsa: b53/bcm_sf2: implement .support_eee() method
f12b363887c70 net: dsa: use ethtool string helpers
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
These patches are needed for b53 implementation of b53_support_eee, which
prevent system hangs on bmips devices.
99379f587278c net: dsa: provide implementation of .support_eee()
9723a77318b7c net: dsa: add hook to determine whether EEE is supported
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
The driver tries to access ioports (0x2f9!!) which UML doesn't have.
This causes lots of warnings to appear on boot:
| WARNING: CPU: 0 PID: 1 at lib/logic_iomem.c:188 serial8250_config_port+0x20a/0x1260
| Invalid writeqb of 0xff at address 2f9
| Modules linked in:
| CPU: 0 UID: 0 PID: 1 Comm: swapper Tainted: G W 6.12.25 #0
| Tainted: [W]=WARN
| Stack:
| Call Trace:
| [<60001000>] ? set_reset_devices+0x0/0x16
| [<60452cba>] ? serial8250_config_port+0x20a/0x1260
| [<6071e91f>] ? dump_stack_lvl+0x55/0x71
| [<606e127c>] ? _printk+0x0/0x4f
| [<60044bbb>] ? __warn+0x11b/0x120
| [<6003b5d0>] ? um_set_signals+0x0/0x40
| [<606de721>] ? warn_slowpath_fmt+0x81/0x8c
| [<606de6a0>] ? warn_slowpath_fmt+0x0/0x8c
| [<60452cba>] ? serial8250_config_port+0x20a/0x1260
(they are even recursive!)
Now, the situation gets more confusing. Because from what I can tell,
this was seemingly done intenionally. Upstream patches in related areas:
|commit ddd268c42871b78c75e12a5c28207fb481138f41
|Author: Niklas Schnelle <schnelle@linux.ibm.com>
|Date: Wed Apr 3 14:43:00 2024 +0200
|
| um: Select HAS_IOREMAP for UML_IOMEM_EMULATION
|
| In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
| compile time. UML supports these via its UML_IOMEM_EMULATION so let that
| select HAS_IOPORT and also reflect this in NO_IOPORT_MAP.
hint that there's ongoing work in this area. But unfortunately, this future
hasn't arrived yet. Once this future arrives, please nuke this patch.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
refresh config + patches.
This includes the following changes:
- The selected x86_64 CPU is switched to generic instead of K8.
A backported patch is included from 6.13.
000-v6.13-asm-generic-io.h-rework-split-ioread64-iowrite64-hel.patch
|fixed the following build error:
| CC lib/iomap.o
|lib/iomap.c:156:5: error: no previous prototype for 'ioread64_lo_hi' [-Werror=missing-prototypes]
| 156 | u64 ioread64_lo_hi(const void __iomem *addr)
| | ^~~~~~~~~~~~~~
| [...]
Note: 102-pseudo-random-mac.patch will likely go away with the next stable.
UML is switching to a new networking infrastructure. The previous implementation
using tuntap, daemon, socket, ethertap, vde are being replaced by "vector"
transports tap, hybrid, raw, EoGRE, Eol2tpv3, fd, vde (vector!).
Please see, to checkout what will change:
<https://docs.kernel.org/virt/uml/user_mode_linux_howto_v2.html#setting-up-uml-networking>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This should have been fixed by an upstream patch in 5.12
|commit ed102bf2afed226703eaf85a704755bdbea34583
|Author: Randy Dunlap <rdunlap@infradead.org>
|Date: Thu Apr 15 10:13:52 2021 -0700
|
| um: Fix W=1 missing-include-dirs warnings
|
| Currently when using "W=1" with UML builds, there are over 700 warnings
| cc1: warning: ./arch/um/include/uapi: No such file or directory [-Wmissing-include-dirs]
|
| but arch/um/ does not have include/uapi/ at all, so add that
| subdir and put one Kbuild file into it (since git does not track
| empty subdirs).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
this symbol got picked up by the 6.12 UML conversion.
CONFIG_FBNIC = FaceBook/Meta Platforms Host Network Interface
it should be disabled by default in generic.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This is needed for mac80211 v6.14.5 update.
9934a1bd45b2b clk: provide devm_clk_get_optional_enabled_with_rate()
9934a1bd45
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This is needed for mac80211 v6.14.5 update.
b35108a51cf7b jiffies: Define secs_to_jiffies()
bb2784d9ab495 jiffies: Cast to unsigned long in secs_to_jiffies() conversion
b35108a51cbb2784d9ab
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
New revision Arcadyan Mozart apply a new partition table and moved the
factory partition to a new location. This conflicts with the standard
partition layout and also make the nvmem cells to not correctly identify
the MAC address anymore.
Generate and Provide a new GPT partition table that account for the new
calibration partition.
The previous revision of the Arcadyan Mozart device is considered
pre-production devices and should not be intended for real support.
Link: https://github.com/openwrt/openwrt/pull/18874
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add an additional bootmenu option and commands to overwrite the GPT
table with the custom one for upstream U-Boot.
This is needed as the pre-installed GPT table differ and updating the
GPT table is a requirement to install the upstream U-Boot (or the old
U-Boot will be loaded)
To make the migration to new U-Boot bootloader an user can now load the
system with mtk_uartboot and select "Load GPT Table ..." in conjunction
with other update command.
Link: https://github.com/openwrt/openwrt/pull/18874
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ALFA Network AP120C-AX is a dual-band ceiling AP, based on Qualcomm
IPQ6000 + QCN5021 + QCN5052 + QCA8072 chipsets bundle.
Specifications:
- SOC: Qualcomm IPQ6000 (quad-core Cortex-A53 1.2 GHz)
- DRAM: DDR3 512 MB (Micron MT41K256M16TW-107)
- Flash: 16 MB SPI NOR (Macronix MX25U12832F, boot device)
128 MB NAND (Macronix MX30UF1G18AC, dual-firmware)
- Ethernet: 2x 10/100/1000 Mbps Ethernet (QCA8072)
802.3at/af PoE input in WAN port
- Wi-Fi: 2x2 2.4 GHz Wi-Fi 6 (QCN5021 + RFFM8227 FEM)
2x2 5 GHz Wi-Fi 6 (QCN5152 + QPF4568 FEM)
- Antenna: for indoor version: dual-band, internal
2x (or 4x) U.FL antenna connectors on the PCB
- LED: for indoor/outdoor versions: 5x on external module (status,
2x Wi-Fi, 2x Ethernet), PoE LED on-board
8-pin on-board header for LED module (1.27 mm pitch, J14)
- Button: 1x button (reset)
- USB: 1x 4-pin on-board header for USB 2.0 (2.54 mm pitch, J22)
- UART: 1x micro USB Type-B for system console (Holtek HT42B534)
1x 4-pin on-board header (2.54 mm pitch, J11)
- Power: 802.3at/af PoE or 12 V DC/2 A (DC jack)
- Other: 8-pin and 4-pin on-board headers for external Bluetooth
module (1.27 mm pitch, J15, J16, unavailable, thus untested)
MAC addresses:
- WAN: 00:c0:ca:xx:xx:6c (art 0x0, device's label -2)
- LAN: 00:c0:ca:xx:xx:6d (art 0x6, device's label -1)
- 2.4 GHz (IPQ6000): 00:c0:ca:xx:xx:6e (art 0xc, device's label)
- 5 GHz (IPQ6000): 00:c0:ca:xx:xx:6f (device's label + 1)
Flash instructions:
Due to the lack of direct GUI based update capability and dual-firmware
partition configuration, it is recommended to use TFTP + serial console
based approach (console is available in micro USB connector):
1. Set a static IP 192.168.1.1/24 on PC and start TFTP server with the
'...-factory.ubi' image renamed to 'firmware.bin'.
2. Make sure you can access board's serial console over micro USB.
3. Power up the device, hit any key to enter U-Boot CLI and issue below
commands.
3.1 Restore U-Boot's environment to default values (double check first
the '0:APPSBLENV' partition offset using 'smem' command):
sf probe
sf erase 0x510000 0x10000
saveenv
3.2 Download and install OpenWrt in both partitions and reset the board:
tftpb 0x44000000 firmware.bin
flash rootfs
flash rootfs_1
reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This platform is tightly coupled to upstream and works just
fine with kernel v6.12.
Link: https://github.com/openwrt/openwrt/pull/18936
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace bootmenu shortmenu mediatek patch with a better version proposed
upstream that implement a more clean implementation.
Also the mediatek patch seems to be bugged and with lots of bootmenu
elements it's gets very bugged and unusable.
Refresh any affected patch.
Upstream-Status: Submitted [https://lore.kernel.org/u-boot/20250525134407.3760-1-ansuelsmth@gmail.com/]
Link: https://github.com/openwrt/openwrt/pull/18919
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
